FCC ID: FHO-ICPSW5-18BI-1 Power Supply

ICPSW5-18-BI-1 18W ENGLISH Charger features USB-C outlet compatible with Power Delivery 3.0 standard. Instructions for use Connect the power, insert the USB cable into the USB-C slot and the other end to the device you want to charge. When charging only use a recommended USB cable for your device and replace faulty cables imminently. Good to know USB cable length and quality influences charging speed and performance. Devices may get warm during charging;

this is completely normal and they will 2 gradually cool down again after they are fully charged. Charger storage temperature:

-20C to 25C (-4F to 77F). Charger operating temperature:

0C to 45C (32 F to 113 F). Unplug the charger from the power source before cleaning. To clean the charger, wipe with a moist cloth. Never submerge the charger in water. Save these instructions for future use. 3 WARNING:

Only use in dry locations. Children should be supervised to ensure they do not play with the product. If the device is damaged it shall be destroyed. Never use a damage or faulty USB cable for charging, since this can damage the appliance and harm your device. TECHNICAL DATA Type: ICPSW5-18-BI-1 Input: 100-240VAC, 50/60Hz, 0.5A Output USB-C: 5V DC/3A, 9V DC/2A, 12V DC/1.5A, 15V DC/1.2A Indoor use only Manufacturer: IKEA of Sweden AB Address:

Box 702, SE-343 81 lmhult, SWEDEN PRODUCT SERVICING Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING:

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 4 NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 5 The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store. Inter IKEA Systems B.V. 2019 AA-xxxxxxx-x

(iKEA) Power Supply be MODEL:ICPSWS5-18-BI-

INPUT:100-240V~ S0/60HZ Max. 0.5A OUTPUT: SV== 3A/9V== 24) w {V1.5 i ne or J a ne Ces

@HA cus ae Made in China FCC ID: FHO-ICPSW-18BI-

CAN ICES-3 (B) INMB-3 (B) IKEA of es) AB SE-343 81 Almhult oO Oo

Date: 2020-01-20 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The IKEA of Sweden AB, the undersigned, hereby authorizes Ms. Jessie Xu of TV Rheinland Shanghai Co., Ltd, to act on the behalf of the IKEA of Sweden AB solely in matters relating to the application for an FCC equipment authorization for FCC ID: FHO-ICPSW5-18BI-1 including the signing of documents in connection with this Application. Necessary acts carried out by Ms. Jessie Xu of TV Rheinland Shanghai Co., Ltd. on our behalf of the IKEA of Sweden AB in connection with the Application shall have the same effect as acts of the IKEA of Sweden AB. The IKEA of Sweden AB also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Name Ivan Susak TitleProduct Engineering Manager CompanyIKEA of Sweden AB

Date: 2020-01-20 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID: FHO-ICPSW5-18BI-1 To whom it may concern:

Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

Block Diagram Schematics Product Description PCB Layout Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:

Test setup photos External photos Internal photos Rationale for request for confidentiality:

IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality:

Disclosure of the permanently confidential portions of the application to competitors would not only give them significant competitive advantages in develop similar products, but would also disclose successful implementation of term unpublished, confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. technology developed by us.]

leading edge

[Short Sincerely, _________________ Ivan Susak Product Engineering Manager IKEA of Sweden AB E-mail: ivan.susak@inter.ikea.com Telephone number: +46 766190914