SJMRKE 2 specially suited to the material. specially suited to the material. English English English specially suited to the material. 3 1x 4 5 4x 6 mm
(0 15/64") m m 6 1
8
5 0
3 mm
(0 1/8") 6 2x 1 2 2x 7 45,5mm
(1 8/10") X 147,5mm
(5 8/10") Y 8 Min. 6 mm/Max 22 mm Min. 0 15/64"/Max 0 55/64"
English Franais Espaol 9 10 13 16 English 10 Charger features Wirelessly charges Qi-compatible Compatible with Qi 1.2.4BPP devices. specification Charging time may vary based on the devices battery capacity, charge level, the age of the battery and the temperature in the surrounding area. Charger storage temperature:
Temperature and power monitor for
-20C to 25C (4F to 77F). safety. LED status indicator. Instructions for use Connect the charger cable to the power adapter and plug it into the wall socket. For wireless charging, place the device to be charged on top of the plus sign (+) on the desk. The device must be placed directly over the plus sign (+) on the desk for the charging function to work optimally. Note that on some devices you may have to activate wireless charging in settings. If your battery is completely discharged, it may take a few minutes before it starts charging. This is entirely normal. You can see that the battery has begun charging when the battery symbol appears on your device. LED indicator (see illustrations):
1. Power on: LED lights up for 3 seconds. 2. Charging: LED on. 3. Charging completed: LED off. 4. Error: LED flashes. Good to know The distance between phone and charger should be minimum 6 mm, or the charger will not start charging. Devices may get warm during charging;
this is completely normal and they will gradually cool down again after they are fully charged. Charger operating temperature:
0C to 40C (32F to 104F). Unplug the charger from the power source before cleaning and when it is not in use. To clean the charger, wipe with a moist cloth. Never submerge the charger in water. Recommended precautionary measures and technical data. See the back of the charger. Save these instructions for future use. WARNING:
Only charge devices that are Qi-
compatible. The wall socket must be located near the equipment and must be easily accessible. Only use in dry locations. Only use the included 24V adapter with the wireless charger unit. Other adapters could cause damage to the unit. Children should be supervised to ensure they do not play with the product. Do not subject the units to wet, moist or excessively dusty environments since this can cause damage to the units. If the cord is damaged the product shall be destroyed. Do not install the product on the desk more than 1.5m high. Product servicing Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. RF EXPOSURE INFORMATION According to RF exposure regulations, under normal operations the end user shall refrain from being closer than 10 cm from the device. TECHNICAL DATA Type: E2018 SJMRKE Input: 24.0V DC, 0.7A, 18.0W Operating frequency: 110 - 148 kHz Output power: -2 dBuA/m at 10m TECHNICAL DATA Power Supply Unit Type: ICPSW24-19-1 Input: 100-240 VAC, 50/60 Hz, 0.4A Output: 24.0 V DC Max total load: 0.8 A, 19.0 W Indoor use only Manufacturer: IKEA of Sweden AB
(commercial registration number:
556074-7551) Address:
Box 702, SE-343 81 lmhult, SWEDEN The Qi symbol is a trademark of the Wireless Power Consortium 11 This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio 12 or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store. Franais 13 Caractristiques du chargeur Appareils de charge sans fil compatibles avec la technologie Qi. Conforme la norme Qi 1.2.4BPP. Contrle temprature et charge pour plus de scurit. Voyant dtat LED. Instructions d'utilisation Connectez le cble du chargeur l'adaptateur secteur et branchez-le dans la prise murale. Pour le chargement sans fil, placer lappareil sur le signe (+) du chargeur. L'appareil doit tre plac prcisment sur le signe (+) du chargeur pour un chargement optimal. Sur certains appareils, il est ncessaire dactiver la fonction de chargement sans fil dans les paramtres pour que le chargement fonctionne. Si la batterie est compltement dcharge, elle peut mettre quelques minutes avant de commencer se recharger. Cela est tout fait normal. Lorsque le symbole de la batterie apparat sur le tlphone cela indique le dbut du chargement. Il est tout fait normal que les appareils chauffent au cours du chargement ; ils refroidiront progressivement une fois quils seront entirement chargs. La dure du chargement peut varier en fonction de la capacit de la batterie de lappareil, du niveau de charge, de lge de la batterie et de la temprature ambiante. Temprature de stockage du chargeur :
-20C 25C (4F 77F). Temprature de fonctionnement du chargeur : 0C 40C (32F 104F). Dbranchez le chargeur de la source dalimentation avant de procder son nettoyage et lorsquil nest pas utilis. Pour nettoyer le chargeur, essuyez-le avec un chiffon humide. Ne jamais plonger le chargeur dans leau. Mesures de prcaution recommandes et donnes techniques : se reporter au dos du chargeur. Conserver ces instructions en vue dune utilisation ultrieure. Voyant lumineux LED (voir illustrations) :
1. En fonctionnement : la LED sallume ATTENTION :
pendant 3 secondes. 2. En chargement : la LED est allume. 3. Chargement termin : la LED steint. 4. Erreur : la LED clignote. Bon savoir La distance entre le tlphone et le chargeur doit tre d'au moins 6 mm, sinon le chargeur ne commencera pas se charger. Ne charger que des appareils compatibles avec la technologie Qi. La prise murale doit tre proche de lquipement et facilement accessible. Utiliser dans des endroits secs uniquement. Utilisez uniquement l'adaptateur 24 V inclus avec le chargeur sans fil. D'autres adaptateurs peuvent endommager l'unit. Veiller ce que les enfants ne jouent pas avec ce produit. Ne pas laisser les units exposs aux rayons directs du soleil ou proximit dune source de chaleur car cela pourrait entraner une surchauffe. Le cble ou cordon est endommag, le produit doit tre dtruit. N'installez pas le produit sur un bureau plus de 1,5 m de hauteur. Rparation du produit Ne pas tenter de rparer soi-mme ce produit ; soulever ou retirer les couvercles risque de provoquer des chocs lectriques ou autres dommages. INFORMATION SUR LEXPOSITION AUX RADIOFRQUENCES Selon la rglementation sur lexposition aux radiofrquences, dans des conditions normales dutilisation lutilisateur final ne doit pas se tenir moins de 10 cm de lappareil. CARACTRISTIQUES TECHNIQUES Type : E2018 SJMRKE Entre : 24.0V DC, 0.7A, 18.0W Frquence de transmission : 110 - 148 kHz Puissance de sortie : -2 dBA/m 10 m Bloc d'alimentation Type: ICPSW24-19-1 Entre : 100-240 VAC, 50/60 Hz, 0.4A Sortie : 24.0 V CC Charge total max. : 0.8 A, 19.0 W Utilisation en intrieur uniquement. Fabricant : IKEA of Sweden AB
(numro d'immatriculation : 556074-7551) Adresse:
Box 702, SE-343 81 lmhult, SUDE 14 Le logo Qi est la marque dpose du Wireless Power Consortium. Ce dispositif est conforme la section 15 des rglements de la FCC. Ce dispositif contient un ou plusieurs metteurs/rcepteurs sans licence qui sont conformes la ou aux normes RSS sans licence dInnovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d'interfrences nuisibles, et
(2) cet appareil doit accepter toute autre interfrence reue, y compris les interfrences pouvant entraner un fonctionnement non dsir. ATTENTION :
Tout changement ou modification apports cet appareil sans approbation expresse de la partie responsable de la conformit peut rendre nulle la capacit de lutilisateur utiliser cet appareil. REMARQUE :
Cet appareil a t test et il est conforme aux exigences relatives aux appareils lectroniques de classe B, selon la section 15 des rgles de la FCC (Commission fdrale des communications). Ces exigences sont prvues pour fournir une protection raisonnable contre les interfrences nuisibles dans le cas dune installation domestique. Cet appareil gnre, utilise et peut 15 Le pictogramme de la poubelle barre indique que le produit doit faire l'objet d'un tri. Il doit tre recycl conformment la rglementation environnementale locale en matire de dchets. En triant les produits portant ce pictogramme, vous contribuez rduire le volume des dchets incinrs ou enfouis, et diminuer tout impact ngatif sur la sant humaine et l'environnement. Pour plus d'information, merci de contacter votre magasin IKEA. mettre de lnergie sous forme de frquences radio. Si lappareil nest pas install ou utilis conformment aux instructions, il peut provoquer des interfrences perturbant les communications radio. Il est cependant impossible de garantir labsence totale dinterfrences dune installation donne. Si cet appareil produit des interfrences nuisibles la rception radio/tlvision, ce qui peut-tre dtermin en mettant successivement lappareil sous tension et hors tension, nous conseillons lutilisateur dessayer de remdier ce problme en suivant lune des procdures suivantes :
Rorienter ou dplacer lantenne de Augmenter la distance entre lappareil rception. et le rcepteur. Brancher lappareil une prise place sur un circuit diffrent de celui auquel le rcepteur est raccord. Contacter votre revendeur ou tout technicien radio/TV qualifi pour obtenir de laide. Espaol 16 17 18 19