all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 700.58 KiB | March 11 2017 | |||
1 |
|
Internal Photos | Internal Photos | 2.89 MiB | March 11 2017 / March 05 2018 | |||
1 |
|
External Photos | External Photos | 2.91 MiB | March 11 2017 / March 05 2018 | |||
1 |
|
ID Label and Location Info | ID Label/Location Info | 403.71 KiB | March 11 2017 | |||
1 |
|
Agency Letter | Cover Letter(s) | 32.28 KiB | March 11 2017 | |||
1 |
|
Confidentiality Letter | Cover Letter(s) | 64.37 KiB | March 11 2017 | |||
1 | RF Exposure Info | March 11 2017 | ||||||
1 | Test Report | March 11 2017 | ||||||
1 | Test Report | March 11 2017 | ||||||
1 | Test Setup Photos | March 11 2017 / March 05 2018 |
1 | Users Manual | Users Manual | 700.58 KiB | March 11 2017 |
ENEBY ENGLISH FRANAIS ESPAOL 3 10 17 ENGLISH 3 TABLE OF CONTENTS ENEBY 20/30 overview ............................................ 4 Getting started ...................................................... 5 Turn Speaker On/Off .............................................. 5 Add Bluetooth device .............................................. 5 Play music from external source .............................. 5 Use speaker throughout home ................................. 5 Attach speaker to a wall or a stand ........................... 5 Other Settings ....................................................... 5 Safety and important notice .................................... 6 Care Instructions ................................................... 6 Troubleshooting ..................................................... 7 Technical data ........................................................ 8 ENEBY 30 (E1730) 4 ENEBY 20 (E1720) 1 4 3 2 5 1. Power On/Off/Volume control 2. AC IN 3. AUDIO IN 4. For ENEBY wall mount and ENEBY Stand (sold separately) 5. Battery compartment lid (only on ENEBY 20, sold separately) 640m A-300m A TYPE E1720 - ENEBY 20 TYPE E1730 - ENEBY 30 640m A-300m A 1 4 3 2 5 Unpair Bluetooth device Go to your Bluetooth menu on your mobile device and unpair ENEBY 20/30 from your devices. Play music from external source:
Connect a portable audio device to the AUDIO IN (3) jack on the rear panel. The speaker automatically detects the external input and disables Bluetooth functionality. Use a 3.5mm 3-pol Audio cable for this feature. Use speaker throughout home:
ENEBY 20 has the possibility to be portable. ENEBY battery pack is sold separately. To insert the battery, open the compartment lid (5) and insert the battery in the correct direction. The battery is charged in the product when mains cord is connected. When battery is low a red LED in the knob (1) will flash. During charging the red LED is on. Attach Speaker to a wall or a stand:
ENEBY wall mount and ENEBY stand are accessories and are sold separately. Use holes (4) and included screws to mount stand or wall mount. Do not over tighten the screws. Getting started:
1. Connect mains cord into AC In (2) connector. 2. A quick press on the knob (1) turns the speaker on/off. White LED is now on. If a paired device is found, the LED shines without blinking and your speaker is ready to use. 3. If no device is found the speaker LED continues to blink and enters pairing mode automatically. Go to the Bluetooth settings in your mobile device and connect to ENEBY 20/30. The LED should now stop blinking and your speaker is ready to use. If no music has been playing for 20min, the speaker will enter sleep mode. Adjust Volume Turn the knob (1) left to decrease or turn it right to increase volume level. Add additional Bluetooth device(s)
(max 8 devices) 1. Go to your Bluetooth menu on your mobile device and connect to ENEBY 20/30. 2. Once Bluetooth connection is established, the white LED stops blinking. Other settings:
Bass Control:
Treble Control:
Factory reset::
Press knob (1) 3 sec. This enters the bass level control. LED flash slowly. Turn left/right to adjust. Confirm bass setting and enter the treble setting control by pressing the knob one time. LED flash quickly. Turn left/right to adjust treble and confirm by pressing the knob one time and exit sound settings. Press knob (1) 10 sec. This deletes all paired Bluetooth devices and restores default sound settings. Safety and important notice WARNING:
Risk of overheating! Never install the product in a confined space. Always leave a space of at least 5 mm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Never place the product or batteries near open flames or other heat sources, including direct sunlight. Only use this product indoors. The apparatus shall not be exposed to dripping or splashing, no objects filled with liquids, such as vases, shall be placed on the apparatus. Never place this product on other electrical equipment. The mains plug or an appliance coupler is to be used as a disconnect device, the disconnect device shall remain readily operable. If the supply cord is damaged, replace it with a new cord set which is type-
approved for your country. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or similar. 6 IMPORTANT!
The speaker is for indoor use only and can be used in temperatures ranging from 0 C to 45 C. Do not leave the speaker in direct sunlight or near any heat source, as it may overheat. Do not subject the speaker to wet, moist or excessively dusty environments, as this may cause damage. The range between the speaker and the receiver is measured in open air. Different building materials and placement of the units can affect the wireless connectivity range. Too high volume can damage your Do not touch the acoustic components. Don not use the product as a shelf or hearing. stand. CARE INSTRUCTIONS To clean the speaker, wipe with a moist cloth. Never submerge the speaker in water. NOTE!
Never use abrasive cleaners or chemical solvents as this can damage the product. PRODUCT SERVICING Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Manufacturer: IKEA of Sweden AB Address: Box 702, SE-343 81 LMHULT 7 Troubleshooting Problem Cannot use Bluetooth:
Poor sound quality when playing via Bluetooth:
Poor sound quality when playing via AUDIO IN input:
Tip Make sure 3.5mm connector is not plugged into AUDIO IN jack on rear panel. Make sure your phone, tablet or other media device supports Bluetooth. Make sure to connect to the IKEA device called ENEBY 20/30 Make sure your phone, tablet or other media device is paired and that its Bluetooth is turned on. Make sure no other Bluetooth devices in the room are paired. If so, turn off the Bluetooth function in that device. If Bluetooth reception is poor, move the device closer to the speaker or remove any obstacles between the device and the speaker. Note: Bluetooth reception will normally operate at a distance of up to 6-8m in conditions with an unobstructed path. When objects, furniture or walls are in between, Bluetooth reception will be reduced. When the device is placed in pockets of clothes or in a bag, Bluetooth reception can be reduced. Make sure your phone, table or other media device is not at maximum volume, if so, turn down the volume. 8 Technical data Model Name Type number Input Standby Power Consumption Rated Power Consumption Operating temperatures Operating humidity Dimensions (mm) Weight Audio In Audio In Input sensitivity ENEBY 20 E1720 ENEBY 30 E1730 100-240VAC 50-60Hz
<0.5 W 35.5W/230V 39.5W/110V 37W/230V 40W/110V 0C to 45C 0 to 95%RH 199x199x80
(without handle) 1.5kg
(without battery) 299x299x106 3.8kg 3.5mm jack 1.65V max Battery playtime at 50% volume 10-12 Hours N/A Auto Standby Speaker type Woofer Soft dome tweeter Amplifier output power Frequency range Bluetooth Version Wireless range in open air Operating frequency Radio output power 20 min mixed mono 1 x 3.2"
2 x 4"
1 x 1"
1x15W + 1x5W 2x15W + 1x10W 48 - 20 kHz 30 - 20 KHz V 4.2 8-10 m 2.4 - 2.48 GHz 4 dBm 9 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by IKEA is under license. Other trademarks and trade names are those of their respective owners. The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store. This device complies with Part 15 of the FCC Rules/Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful inter-
ference, and
(2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FRANAIS 10 TABLE DES MATIRES ENEBY 20/30 : vue densemble ................................. 11 Installation ............................................................ 12 Mise sous/hors tension de lenceinte .......................... 12 Ajout dun appareil Bluetooth .................................... 12 Lecture partir dun priphrique ............................. 12 Utiliser lenceinte dans toute la maison ....................... 12 Autres rglages ...................................................... 12 Fixer lenceinte au mur ou un support ..................... 12 Scurit et informations importantes ......................... 13 Entretien ............................................................... 13 Rsolution des problmes ........................................ 14 Caractristiques techniques ...................................... 15 ENEBY 30 (E1730) 11 ENEBY 20 (E1720) 1 4 3 2 5 1. Mise sous/hors tension/rglage du volume 2. AC IN 3. AUDIO IN 4. Pour support mural ENEBY et support ENEBY (vendus sparment) 5. Couvercle du compartiment batterie
(uniquement sur ENEBY 20, vendus sparment) 640m A-300m A TYPE E1720 - ENEBY 20 TYPE E1730 - ENEBY 30 640m A-300m A 1 4 3 2 Installation :
1. Raccorder le cordon dalimentation au port AC In (2). 2. Une pression rapide sur le bouton (1) permet dallumer/teindre lenceinte. Le voyant LED blanc est allum. Si un appareil jumel est dtect, le voyant LED sallume de faon permanente et lenceinte est prte tre utilise. 3. Si aucun appareil nest dtect, le voyant LED de lenceinte continue de clignoter et se met automatiquement en mode jumelage. Utiliser la fonction rglages Bluetooth de votre appareil mobile et connecter ENEBY 20/30. Le voyant LED sarrte de clignoter et lenceinte est prte pour lutilisation. Si lenceinte est reste inactive 20 minutes, elle se met en mode veille. Rglage du Volume Tourner le bouton (1) vers la gauche pour baisser le volume, ou vers la droite pour laugmenter. Ajout dun ou plusieurs appareils Bluetooth
( 8 appareils maximum) 1. Utiliser le menu Bluetooth de votre appareil mobile et connecter ENEBY 20/30. 2. Une fois la connexion Bluetooth tablie, le voyant LED blanc cesse de clignoter. 12 Dconnexion dun appareil Bluetooth Utiliser le menu Bluetooth de votre appareil mobile et dconnecter ENEBY 20/30 de vos appareils. Lecture partir dun priphrique :
Connecter un appareil mobile audio par la prise jack AUDIO IN (3) situe larrire de lenceinte. Lenceinte dtecte automatiquement le priphrique et dsactive la fonction Bluetooth. Utiliser pour cela un cble audio 3,5mm 3 points. Utiliser lenceinte dans toute la maison :
ENEBY 20 est une version portable. La batterie pour lenceinte ENEBY est vendue sparment. Pour insrer la batterie, soulever le couvercle (5) et placer la batterie dans le bon sens. La batterie se recharge lintrieur du produit lorsque ce dernier est branch sur lalimentation lectrique. Quand le niveau de chargement de la pile est faible, un voyant LED rouge sur le bouton (1) clignote. Le voyant LED rouge reste allum pendant le chargement. Fixer lenceinte au mur ou un support :
Le support mural ENEBY et le support ENEBY sont des accessoires vendus sparment. Utiliser les vis incluses et les faire passer dans les trous (4) pour fixer lenceinte au mur ou au support. Ne pas trop serrer les vis. Autres rglages :
Basses :
Contrle des aigus :
Rinitialisation paramtres dusine :
Appuyez sur le bouton de (1) pendant 3 s pour accder au contrle du niveau des basses. La LED clignote lentement. Tournez vers la gauche/la droite pour ajuster. Confirmez le rglage des basses et accdez la commande de rglage des aigus en appuyant une fois sur le bouton. La LED clignote rapidement. Tournez vers la gauche/la droite pour rgler les aigus avant de confirmer et quitter les paramtres du son en appuyant une fois sur le bouton. Appuyez sur le bouton (1) pendant 10 s. Vous supprimez ainsi tous les priphriques Bluetooth apparis et restaurez les paramtres par dfaut du son. Scurit et informations importantes 13 ATTENTION :
Risque de surchauffe ! Ne jamais utiliser ce produit dans un espace confin. Toujours laisser un espace de 5 mm autour du produit pour assurer une bonne ventilation. Veiller ce que des rideaux ou tout autre objet ne recouvrent pas les fentes daration du produit. Veiller ce que ni le produit ni la batterie ne se trouvent proximit dune flamme ou de toute autre source de chaleur, y compris la lumire directe du soleil. Utiliser ce produit lintrieur uniquement. Veiller ce que lappareil ne reoive pas de gouttes ni de projections daucune sorte, et ne jamais poser sur lappareil un rcipient contenant un liquide, comme un vase par exemple. appareil lectrique. La prise lectrique ou un coupleur est utiliser comme dispositif de dcouplage, et ce dernier doit rester facilement accessible. Si le cordon dalimentation est endommag, le remplacer par un nouveau cordon homologu pour votre pays. Ne pas exposer les produits contenant des piles ou des batteries une chaleur excessive (lumire du soleil, feu ou source assimile). Ne jamais placer ce produit sur un autre acoustiques. IMPORTANT !
Cette enceinte est exclusivement destine une utilisation intrieure, et des tempratures allant de 0C 45 C. Maintenir cette enceinte labri des rayons du soleil, des flammes nues et de toute source de chaleur pour viter le risque de surchauffe. Ne pas placer lenceinte dans un endroit humide ou trs poussireux au risque de lendommager. La porte entre lenceinte et le rcepteur a t mesure en plein air. La porte de connexion varie en fonction des matriaux et de lemplacement de lenceinte lintrieur du btiment. Une coute prolonge pleine puissance peut endommager laudition de lutilisateur. Ne pas toucher les composants Ne pas poser dobjets sur ce produit et ne pas sen servir comme support. ENTRETIEN Pour nettoyer lenceinte, essuyez-la avec un chiffon humide. Ne jamais plonger lenceinte dans leau. REMARQUE !
Ne jamais utiliser de nettoyants abrasifs ou de solvants chimiques qui pourraient abmer ce produit. RPARATION DU PRODUIT Ne pas tenter de rparer soi-mme ce produit ; soulever ou retirer le couvercle du botier risque notamment de provoquer des chocs lectriques. Fabricant : IKEA of Sweden AB Adresse : Box 702, SE-343 81 lmhult, SUDE 14 Rsolution des problmes Problme Impossible dutiliser le Bluetooth:
Suggestion Vrifier que le connecteur de 3,5 mm nest pas branch sur la prise jack AUDIO IN situe larrire de lenceinte. Vrifier que votre tlphone, tablette ou autre appareil mobile prend en charge le Bluetooth. Vrifier que vous vous connectez bien lappareil IKEA nomm ENEBY 20/30. Vrifier que votre tlphone, tablette ou autre appareil mobile est bien jumel et que la fonction Bluetooth est active. Vrifier quaucun autre appareil Bluetooth jumel ne se trouve dans la pice. Si cest le cas, dsactiver la fonction Bluetooth sur cet appareil. Si la rception Bluetooth est mauvaise, rapprocher lappareil de lenceinte ou retirer tout obstacle se trouvant entre lappareil et lenceinte. NB : la transmission par Bluetooth fonctionne normalement sur une distance allant jusqu 6-8 m lorsquaucun obstacle ne vient gner la diffusion. Lorsque des objets, des meubles ou des murs se trouvent entre lappareil et lenceinte, cela peut amoindrir la rception Bluetooth. Le fait de placer lappareil dans une poche de vtement ou lintrieur dun sac peut galement nuire la rception Bluetooth. Vrifier que votre tlphone, tablette ou autre appareil mobile nest pas plein volume. Si cest le cas, baisser le volume. Mauvaise qualit du son diffus via Bluetooth :
Mauvaise qualit du son diffus via lentre AUDIO IN :
15 Caractristiques techniques Modle Nom Type Alimentation Consommation lectrique en mode veille Consommation lectrique en mode de fonctionnement Temprature de fonctionnement Humidit de fonctionnement Dimensions (mm) Poids Audio In Sensibilit dentre AUDIO IN Autonomie de la batterie 50% volume Standby automatique Type enceinte Haut-parleur de graves Tweeter dme souple ENEBY 20 E1720 ENEBY 30 E1730 100-240VAC 50-60Hz
<0.5 W 35.5W/230V 39.5W/110V 37W/230V 40W/110V 0C 45C 0 95%RH 199x199x80
(sans poigne) 1.5kg
(sans batterie) 299x299x106 3.8kg 3,5mm jack max. 1.65V 10-12 heures N/A 20 min Mixed Mono 1 x 3.2"
2 x 4"
1 x 1"
Puissance totale amplificateur 1x15W + 1x5W 2x15W + 1x10W Frquence de transmission 48 - 20 kHz 30 - 20 KHz Version Bluetooth Porte en plein air Frquence de transmission Puissance de sortie radio V 4.2 8-10 m 2.4 - 2.48 GHz 4 dBm 16 Brancher lappareil une prise place sur un circuit diffrent de celui auquel le rcepteur est raccord. Contacter votre revendeur ou tout technicien radio/TV qualifi pour obtenir de laide. Les logos et la marque Bluetooth sont des marques dposes de Bluetooth SIG, Inc. ; toutes les utilisations de ces marques par IKEA sont rgies par des accords de licence. Toutes les autres marques commerciales ou noms commerciaux sont la proprit de leurs titulaires respectifs. Le pictogramme de la poubelle barre indique que le produit doit faire lobjet dun tri. Il doit tre recycl conformment la rglementation environnementale locale en matire de dchets. En triant les produits portant ce pictogramme, vous contribuez rduire le volume des dchets incinrs ou enfouis, et diminuer tout impact ngatif sur la sant humaine et lenvironnement. Pour plus dinformation, merci de contacter votre magasin IKEA. Cet appareil est conforme la section 15 des rgles de la FCC/aux normes RSS exemptes de licence dIndustry Canada. Son fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas causer din-
terfrence nuisible et
(2) cet appareil doit accepter toutes les interfrences reues, y compris celles qui peuvent causer un fonctionnement indsirable de lappareil. ATTENTION :
Tout changement ou modification apports cet appareil sans approbation expresse de la partie responsable de la conformit peut rendre nulle la capacit de lutilisateur utiliser cet appareil. REMARQUE :
Cet appareil a t test et il est conforme aux exigences relatives aux appareils lectroniques de classe B, selon la section 15 des rgles de la FCC (Commission fdrale des communications). Ces exigences sont prvues pour fournir une protection raisonnable contre les interfrences nuisibles dans le cas dune installation domestique. Cet appareil gnre, utilise et peut mettre de lnergie sous forme de frquences radio. Si lappareil nest pas install ou utilis conformment aux instructions, il peut provoquer des interfrences perturbant les communications radio. Il est cependant impossible de garantir labsence totale dinterfrences dune installation donne. Si cet appareil produit des interfrences nuisibles la rception radio/tlvision, ce qui peut-tre dtermin en mettant successivement lappareil sous tension et hors tension, nous conseillons lutilisateur dessayer de remdier ce problme en suivant lune des procdures suivantes :
Rorienter ou dplacer lantenne de Augmenter la distance entre lappareil rception. et le rcepteur. ESPAOL NDICE 17 Resumen de ENEBY 20/30 ........................................ 18 Instalacin ............................................................. 19 Encender y apagar el altavoz .................................... 19 Emparejar un dispositivo Bluetooth ........................... 19 Escuchar msica de una fuente externa ..................... 19 Utilizar el altavoz en toda la casa .............................. 19 Fijar el altavoz a una pared o soporte ........................ 19 Otras opciones de configuracin ................................ 19 Seguridad e informacin importante .......................... 20 Instrucciones de mantenimiento ............................... 20 Resolucin de problemas ......................................... 21 Datos tcnicos ........................................................ 22 ENEBY 30 (E1730) 18 ENEBY 20 (E1720) 1 4 3 2 5 1. Encendido/apagado/control del volumen 2. AC IN 3. AUDIO IN 4. Para el accesorio de montaje en la pared y el soporte ENEBY (se venden por separado) 5. Tapa del compartimento de la batera (solo en ENEBY 20, se venden por separado) 640m A-300m A TYPE E1720 - ENEBY 20 TYPE E1730 - ENEBY 30 640m A-300m A 1 4 3 2 Instalacin:
1. Conecta el cable de alimentacin al conector AC IN (2). 2. Para encender/apagar el altavoz, pulsa brevemente el mando (1). Se encender una luz LED blanca. Si encuentra un dispositivo emparejado, la luz LED permanece encendida y el altavoz est listo para usarse. 3. Si no encuentra ningn dispositivo, la luz LED parpadea y el altavoz entra automticamente en modo de emparejamiento. Ve a la configuracin del Bluetooth de tu dispositivo mvil y conctalo a ENEBY 20/30. La luz LED deja de parpadear y el altavoz est listo para utilizarse. Si pasan 20 minutos sin que se reproduzca msica, el altavoz pasar automticamente al modo en espera. Ajustar el volumen Gira el mando (1) hacia la izquierda para bajar el volumen o hacia la derecha para subirlo. Emparejar uno o varios dispositivos Bluetooth
(mx. 8 dispositivos) 1. Ve al men Bluetooth de tu dispositivo mvil y conctalo a ENEBY 20/30. 2. Una vez establecida la conexin Bluetooth, la luz LED blanca deja de parpadear. 19 Desemparejar un dispositivo Bluetooth Ve al men Bluetooth de tu dispositivo mvil y elimina ENEBY 20/30 de la lista de dispositivos emparejados. Escuchar msica de una fuente externa:
Conecta un dispositivo audio porttil a la entrada AUDIO IN (3), en el panel posterior. El altavoz reconoce automticamente la entrada exterior y desactiva la funcin Bluetooth. Para esta conexin, utiliza un cable de audio de 3,5 mm con 3 polos. Utilizar el altavoz en toda la casa:
ENEBY 20 se puede utilizar como altavoz porttil. La batera ENEBY se vende por separado. Para introducir la batera, abre la tapa del compartimento (5) y coloca la batera en la direccin correcta. La batera se recarga dentro del producto cuando el cable de alimentacin est conectado. Cuando la batera tiene un nivel de carga bajo, en el mando (1) parpadea una luz LED roja. La luz LED roja permanece encendida durante la recarga. Fijar el altavoz a una pared o soporte:
El accesorio para el montaje en la pared y el soporte ENEBY se venden por separado. Utiliza los agujeros (4) y los tornillos incluidos para fijar el altavoz al soporte o al accesorio para el montaje en la pared. No aprietes los tornillos en exceso. Otras opciones de configuracin:
Control de los bajos:
Pulsa el botn (1) durante 3 segundos. As entrars en el control del nivel de graves. El LED parpadea lentamente. Gira a la izquierda/derecha para ajustarlo. Confirma el ajuste de los graves y entra en el control de ajuste de los agudos pulsando el botn una vez. El LED parpadea rpidamente. Gira a la izquierda/derecha para ajustar los agudos y confrmalo pulsando el botn una vez y saliendo de los ajustes del sonido. Pulsa el botn (1) durante 10 segundos. As se eliminan todos los dispositivos Bluetooth emparejados y se restablecen los ajustes de sonido por defecto. Control de agudos:
Restablecer la configuracin de fbrica:
Seguridad e informacin importante 20 ADVERTENCIA:
Riesgo de sobrecalentamiento. No instales nunca el producto en un espacio cerrado. Deja siempre al menos 5 mm de hueco alrededor del producto para permitir la circulacin del aire. Asegrate de que las aberturas de ventilacin no estn tapadas por cortinas u otros objetos. No coloques el producto o la batera cerca de llamas u otras fuentes de calor, incluida la luz directa del sol. Este producto debe utilizarse nicamente en espacios interiores. No expongas el aparato a gotas o salpicaduras y no poses encima objetos que contengan lquidos, como jarrones. No coloques el producto encima de otros aparatos elctricos. El enchufe y el conector del aparato se utilizan para interrumpir la alimentacin del altavoz y, por lo tanto, deben permanecer accesibles. Si el cable de alimentacin est daado, sustityelo por uno nuevo que est aprobado para tu pas. No expongas pilas ni bateras a fuentes de calor como llamas o la luz directa del sol. IMPORTANTE El altavoz debe utilizarse nicamente en espacios interiores a una temperatura de entre 0 y 45 C. Para evitar el sobrecalentamiento, no expongas el altavoz a la luz directa del sol ni lo dejes cerca de otras fuentes de calor. No pongas el altavoz en ambientes hmedos o con una cantidad excesiva de polvo, ya que esto podra daarlo. El alcance entre el altavoz y el receptor se mide en espacios abiertos, sin obstculos en medio. El alcance de la conexin wifi puede variar segn el material con el que est construido el edificio y la ubicacin de las unidades. Escuchar msica a un volumen demasiado elevado puede daar el odo. No tocar los componentes acsticos. No utilizar el producto como soporte o estante para otros objetos. INSTRUCCIONES DE MANTENIMIENTO Para limpiar el altavoz, usa un pao hmedo. No sumerjas nunca el altavoz en el agua. IMPORTANTE No utilices nunca detergentes abrasivos o disolventes qumicos, ya que pueden daar el producto. REPARACIN DEL PRODUCTO No intentes nunca reparar el producto por tu cuenta, ya que abrir o retirar las tapas puede exponerte a una descarga elctrica u otros riesgos. Fabricante: IKEA of Sweden AB Direccin: Box 702, SE-343 81 lmhult, SUECIA 21 Resolucin de problemas Problema Consejo No consigo usar el Comprueba que el conector de 3,5 mm no est enchufado en Bluetooth:
la toma AUDIO IN del panel posterior. Comprueba que tu telfono, tableta y dems dispositivos digitales sean compatibles con Bluetooth. Asegrate de conectar el aparato al dispositivo ENEBY 20/30 de IKEA. Comprueba que tu telfono, tableta y dems dispositivos digitales estn correctamente conectados y que la funcin Bluetooth est activada. Comprueba que no haya otros dispositivos Bluetooth emparejados en la habitacin. Si los hay, desactiva la funcin Bluetooth de dichos dispositivos. Si la recepcin Bluetooth es mala, acerca el dispositivo al altavoz o quita los obstculos que haya entre el dispositivo y el altavoz. Importante: La recepcin Bluetooth normalmente funciona hasta una distancia de 6-8 m si no hay obstculos entre el dispositivo y el altavoz. La presencia de objetos, muebles y paredes entre el dispositivo y el altavoz puede afectar a la recepcin Bluetooth. Si el dispositivo est dentro de un bolsillo o una bolsa, la recepcin Bluetooth puede verse afectada. Comprueba que tu telfono, tableta y dems dispositivos digitales no estn al volumen mximo. Si fuera as, baja el volumen. La calidad del audio reproducido a travs de Bluetooth es muy baja:
La calidad del audio reproducido a travs de la entrada AUDIO IN es muy baja:
22 Datos tcnicos Nombre del modelo Nmero del modelo Entrada Consumo energtico en modo de espera Consumo energtico nominal Temperatura de funcionamiento Humedad de funcionamiento Medidas (mm) Peso Audio In Sensibilidad de entrada de audio Autonoma de la batera al 50% del volumen Reposo automtico Tipo de altavoz Woofer ENEBY 20 E1720 ENEBY 30 E1730 100-240VAC 50-60Hz
<0.5 W 35.5W/230V 39.5W/110V 37W/230V 40W/110V De 0 C a 45 C De 0 a 95% HR 199x199x80
(sin mango) 1.5kg
(sin batera) 299x299x106 3.8kg 3,5 mm jack 1.65 V mx. 10-12 horas N/A 20 mntur Mixed mono 1 x 3.2"
2 x 4"
Tweeter de cpula blanda 1 x 1"
Potencia total del amplificador 1x15W + 1x5W 2x15W + 1x10W Gama de frecuencias 48 - 20 kHz 30 - 20 KHz Versin Bluetooth Rango wifi al aire libre Frecuencia operativa Potencia de salida de radio V 4.2 8-10 m 2.4 - 2.48 GHz 4 dBm 23 La palabra y los logotipos Bluetooth son marcas comerciales registradas propiedad de Bluetooth SIG, Inc., e IKEA hace uso de dichas marcas bajo licencia. Las dems marcas y nombres comerciales pertenecen a sus respectivos propietarios. La imagen del cubo de basura tachado indica que el producto no debe formar parte de los residuos habituales del hogar. Se debe reciclar segn la normativa local medioambiental de eliminacin de residuos. Cuando separas los productos que llevan esta imagen, contribuyes a reducir el volumen de residuos que se incineran o se envan a vertederos y minimizas el impacto negativo sobre la salud y el medio ambiente. Para ms informacin, ponte en contacto con tu tienda IKEA. Este aparato cumple la parte 15 de las reglas de la FCC/de las normas RSS exentas de licencia de Industry Canad. Su funcion-
amiento est sometido a las dos condiciones siguientes:
(1) este aparato no debe causar interferen-
cias dainas y
(2) este aparato debe aceptar todas las interferencias recibidas, incluidas las que pueden causar el funcionamiento indeseado del aparato. ATENCIN:
Cualquier cambio o modificacin que se realice en este aparato sin la aprobacin ex-
presa de la parte responsable de la confor-
midad puede anular la capacidad del usuario para utilizar el aparato. NOTA:
Este equipo ha sido probado para comprobar que cumple los lmites establecidos en los dispositivos digitales de Clase B, segn el apartado 15 del reglamento FCC. Estos lmites se han establecido para proporcionar una proteccin razonable contra las interferencias perjudiciales en una instalacin domstica. Este equipo genera, usa e irradia energa de radiofrecuencia, y si no se instala y se usa de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las comunicaciones por radio. Sin embargo no existe garanta de que no se produzcan interferencias en una instalacin en concreto. Si el equipo produjera interferencias perjudiciales en la recepcin de radio o TV, lo que se puede comprobar encendiendo y apagando el equipo, recomendamos al usuario que intente corregir dichas interferencias adoptando una o ms de las siguientes medidas:
Reorientar o recolocar la antena receptora. el receptor. Aumentar la distancia entre el equipo y Conectar el equipo a un enchufe o circuito distinto al que est conectado el receptor. Solicitar ayuda al vendedor o a un tcnico cualificado de radio/TV. Inter IKEA Systems B.V. 2017 AA-2059957-1
1 | ID Label and Location Info | ID Label/Location Info | 403.71 KiB | March 11 2017 |
This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions
(1) This device may not cause harmful interference and
(2) this device must accept any interference received including interference that may cause undesired operation 300mA-635mA 300mA-635mA This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions
(1) This device may not cause harmful interference and
(2) this device must accept any interference received including interference that may cause undesired operation 24mm 251mm ENEBY 30
1 | Agency Letter | Cover Letter(s) | 32.28 KiB | March 11 2017 |
October 12, 2017 Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:
Limited Agency Agreement IKEA of Sweden AB FCC ID: FHO-E1730 To Whom It May Concern:
We, IKEA of Sweden AB, hereby authorized TV Rheinland Shanghai Co., Ltd to act as our Agent for the purpose of preparing application for FCC ID number FHO-E1730 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is October 3, 2017. The Limited Agency Agreement expires on June 3, 2018, unless sooner terminated or extended by written notice to TV Rheinland Shanghai Co., Ltd and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Ivan Susak Team Manager, Laws&Standards IKEA of Sweden AB Ivan.susak@ikea.com
+4647681000 Inter IKEA Systems B.V. 2014
1 | Confidentiality Letter | Cover Letter(s) | 64.37 KiB | March 11 2017 |
October 12, 2017 Attention: Application Examiner RE:
Request for Confidentiality Applicant: IKEA of Sweden AB FCC ID: FHO-E1730 To Whom It May Concern:
Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:
Schematics Detailed Block Diagrams Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:
Test setup photos External photos Internal photos Rationale for request for confidentiality:
IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential Inter IKEA Systems B.V. 2014 portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.]
Sincerely, Ivan Susak Team Manager Laws & standards IKEA of Sweden AB Ivan.susak@ikea.com
+4647681000 Inter IKEA Systems B.V. 2014
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-11-03 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-11-03
|
||||
1 | Applicant's complete, legal business name |
IKEA of Sweden AB
|
||||
1 | FCC Registration Number (FRN) |
0021625967
|
||||
1 | Physical Address |
Box 702 SE-343 81
|
||||
1 |
Box 702
|
|||||
1 |
Almhult
|
|||||
1 |
Sweden
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
f******@us.tuv.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
FHO
|
||||
1 | Equipment Product Code |
E1730
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
I**** S******
|
||||
1 | Title |
Laws and Standards Specialist
|
||||
1 | Telephone Number |
+46-7********
|
||||
1 | Fax Number |
+46-7********
|
||||
1 |
i******@ikea.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/03/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless speaker ENEBY 30 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
MRT Technology (Suzhou) Co., Ltd.
|
||||
1 | Name |
M******** C****
|
||||
1 | Telephone Number |
+86-5******** Extension:
|
||||
1 |
m******@mrt-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0075000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC