TRIPLE YOUR WARRANTY from 1 year to 3 years when you register your sign online at www.SpellBrite.com/Optiva-V U L T R A B R I G H T L E D O P E N S I G N I N S T R U C T I O N S & W A R R A N T Y Enter production lot X3V1712 in online form Operating Instructions Optiva Ultra-Bright LED OPEN Sign Thank you for purchasing your new Optiva ultra-bright LED OPEN sign. Make sure to read all instructions and warnings prior to installing your new sign. Please save your purchase receipt as it is required for warranty service. C A U T I O N Risk of electrical shock, fire or injury to persons. This product is intended for INDOOR USE ONLY and DRY LOCATIONS only. Do not use in damp or wet locations. Do not install your product in an area that will exceed 120F (48.9C). Disconnect power before handling or cleaning. Use only included power adapter. Do not use any other power adapters. Only plug into a properly grounded outlet that meets all local and national electric codes. Do not use extension cords or adapters. Operate at voltage equal to that on the product label. Do not use solvents or chemicals to clean your sign. Do not submerge your sign in any liquid. Do not use this sign with an external dimmer. Do not attempt to disassemble or service sign. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. U L T R A B R I G H T L E D O P E N S I G N I N S T R U C T I O N S & W A R R A N T Y This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. I N S T A L L A T I O N 1. Select an indoor location to hang your sign. 2. Remove the hanging chains and S hooks from the parts bag and attach to hanger tabs on the top of the sign. Hanger Tab 3. Select a surface that will fully support the sign and mount hooks securely to surface using appropriate hanging hardware. If hanging in window, allow minimum 2 space between the front of the sign and the window. If mounting on wall, allow 1 space between the wall and sign. 4. 5. Use only included power adapter and insert barrel plug into 12 VDC 1.0A power input at back of sign. 6. Press ON/OFF switch to ON (I) position. Sign will illuminate. 7. To clean sign, unplug power and gently wipe surfaces with a soft, dry cloth. Hanger Tab R E M O T E C O N T R O L Part #: 65-REM01-001-00, FCC ID: 2AOS5-ILIGHT 1. To turn your OPEN sign ON, press the ON button. 2. To turn you OPEN sign OFF, press the OFF button. 3. To replace the battery, remove the key chain ring and two screws on the back side of the remote. Remove the old battery and insert the new battery in the same position and orientation to assure proper polarity. Use only 12V, size A23, replacement batteries. If you have questions regarding your remote control or battery replacement, please contact Optiva Signs at (312) 568-5760. 4. Back side of remote control Product Warranty Optiva Ultra-Bright LED OPEN Sign All SpellBrite and Optiva products manufactured by iLight Technologies, Inc. (Manufacturer) are warranted to be free from defects in material and workmanship under intended use and service (normal wear and tear excepted), and subject to the terms and conditions set forth below for one (1) year from the invoice date of the purchase. Warranty will be automatically extended from (1) year to (3) years upon successful completion of the warranty registration form at www.SpellBrite.com/Optiva-V. Enter production lot X3V1712 when completing the online warranty form. Terms and Conditions The Limited Product Warranty applies only when the Product is used in accordance with printed instructions. The Limited Product Warranty does not apply to any abnormal use or failure to comply with federal, state or local laws. Replacement of Manufacturers components with components of other manufacturers will void the Limited Product Warranty. The Limited Product Warranty does not cover misuse or abuse, acts of God or accidents, environmental conditions, defects resulting from improper installation, lack of proper maintenance, unauthorized repair, alteration or disassembly by unauthorized personnel, or operation by improper voltage or current (including power surges). Repair or Replacement of Defective Product Claim must be made directly to iLight Technologies, Inc., at 312-568-5760, prior to return of Product. Returns must be made within 30 days of submitting a claim and must include the Product and original receipt, along with the Manufacturers provided return material authorization number (RMA). Manufacturer must be given a reasonable opportunity to inspect and verify the claim, and shall correct such defect by repair or replacement, F.O.B. factory, of the defective part or parts. Manufacturers obligation under this Limited Product Warranty shall be limited to replacing or repairing, at its sole option, the Product or the defective part thereof which shall, within the applicable Warranty Period set forth above, be determined to be defective, and has not been damaged due to improper use, within Manufacturers sole discretion. The Limited Product Warranty flows only to Purchaser and does not include shipping costs or expenses. If Manufacturer chooses to replace the Product and is not able to do so because it has been discontinued or is not available, Manufacturer may replace it with a comparable product. These express limited warranties state the entire liability of Manufacturer with respect to the Products covered by them. Limits of Liability Manufacturers liability arising from, or in any way connected with, the Products sold, the delivery or any delay with respect thereto, or otherwise arising from, or relating to the Limited Product Warranty, shall be limited solely and exclusively, and at Manufacturers sole election, to either repair or replacement of Products sold. In no event shall Manufacturer be liable for any incidental, consequential, or special damages of any kind or nature whatsoever, including, but not limited to, lost profits or revenues arising from or in any way connected with the Limited Product Warranty, or items sold hereunder, whether alleged to arise from breach of contract, express or implied warranty, or in tort, including, without limitation, negligence, failure to warn or strict liability. NO PERSON IS AUTHORIZED TO MAKE ANY REPRESENTATION OR WARRANTY ON BEHALF OF MANUFACTURER EXCEPT AS EXPRESSLY SET FORTH ABOVE, AND ANY SUCH STATEMENT SHALL NOT BE BINDING ON MANUFACTURER, EXCEPT AS EXPRESSLY SET FORTH ABOVE. MANUFACTURER MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. All questions concerning the meaning or applicability of this limited warranty are to be decided under the laws of the State of Illinois without reference to its choice-of-law rules. Any claims, demands or causes of action for defects or representations of any nature or damages arising from such defects or representations shall be subject to the exclusive jurisdiction of the state and/or federal courts located in Chicago, Illinois. TRIPLE YOUR WARRANTY from 1 year to 3 years when you register your sign online at www.SpellBrite.com/Optiva-V Enter production lot X3V1712 in online form iLight Technologies, Inc. 118 S. Clinton St., Suite 370 Chicago, IL 60661 (312) 568-5760 www.SpellBrite.com