WHATS INCLUDED 8. SLEEP FUNCTION 9. CHARGING / BATTERY BACKUP TimeShaker Boom Main Unit AC Adapter Go to sleep mode. The sleep indicator will turn on. To charge other devices, connect one end of the USB charging cable (not included) to the Charge port on the top of the main unit. Clock keeps running but no LCD backlight/display Battery low icon will stay on when the battery is close to dead Talk End 1. Sleep 2. Continue to press the Sleep button to select the number of minutes you want your music to play: 90, 60, 45, 30, 15 minutes or OFF. The display will change back to the current time if you do not press any button for 3 seconds. The music will stop playing once the sleep timer has nished. To stop sleep mode before the time is out press the Sleep button to select OFF or press the Power button anytime. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction Jumbo Display Alarm Clock Speaker WO289BT Bluetooth PM Sleep Al 1 iLuv Designed in New York, USA Radio Buzzer Al 2 Quick Start Guide Guide de dmarrage rapide QSG QSG Micro USB For charging only. Does not sync. Pour recharger uniquement Ne synchronise pas Nur zum auaden, nicht zum Syncronisieren. Solo para carga. No se sincroniza 1. TO POWER ON / RGLAGES / UM IHN EINZUSTELLEN / PARA ENCENDER 4. SETTING THE ALARM / RGLAGE DE L'HEURE S n o o z e I D i m m e r
(Shaker Side) When the alarm goes o, press the SNOOZE | DIMMER button to temporarily deactivate it. The snooze function will extend your alarm in increments of 9 minutes.
* To adjust the displays brightness. AC Adaper STOP Alarm 1 Alarm 2 To stop the alarm / To disable the alarm Backup Battery Time Format Daylight Saving Time DC 5V 12/24
-1/+1 Time Set Aux-in Power
(Back) 2. SETTING THE CLOCK / RGLAGE DE L'HEURE / UHRZEIT EINSTELLEN / AJUSTE DE LA HORA 5. FM RADIO / CHARGEMENT / AUFLADEN / CARGA /
12 / 24 HR For all settings, if you do not press any button for 5 ~ 10 seconds, you will be timed out. All displayed changes will be saved and will go back to the previous mode. 2. Adjusting item(s) will ash. Time Format Daylight Saving Time DC 5V 12/24
-1/+1 Time Set Aux-in Power
(Back) Daylight Saving Time (DST) Time Format Daylight Saving Time DC 5V 12/24
-1/+1 Time Set Aux-in Power
(Back) Bluetooth PM Sleep Al 1 Bluetooth PM Sleep Al 1 Bluetooth PM Sleep Al 1 Bluetooth PM Sleep Al 1 Radio Buzzer Al 2 Radio Buzzer Al 2 Radio Buzzer Al 2 Radio Buzzer Al 2 Select FM radio from the source of your music.
(FM radio > aux-in > Bluetooth) Talk End 1. Mode 2. Press the << or >> button to tune the frequency. Hold the << or >> button to search down or up for next station. If you do not press any button for 2 seconds, the display will go back to the current time. Press the + or - button to adjust the volume. Power Down Talk End Press for 2 seconds and then go back to the current time. 6. RADIO PRESET RINITIALISATION DE L'IDENTIFIANT DU VIBREUR DE LIT / BED SHAKER ID CODE ZURCKSETZEN REINICIAR EL CDIGO DE IDENTIFICACIN DEL AGITADOR DE CAMA / ID 3. SETTING TIME / RGLAGE DE L'HEURE / UHRZEIT EINSTELLEN / AJUSTE DE LA HORA 02 Time Format Daylight Saving Time DC 5V Time Format Daylight Saving Time DC 5V 12/24
-1/+1 Time Set Aux-in Power 12/24
-1/+1 Time Set Aux-in Power
(Back)
(Back) Set up the preset station Bluetooth PM Sleep Al 1 Radio Buzzer Al 2 Tune the radio station you want to save Bluetooth PM Sleep Al 1 Preset
:02 Press the + or >> button to increase the preset number Press the - or << button to decrease the preset number Radio Buzzer Al 2 Preset Again to save Press the + or - button to adjust the time. Hold the + or - button to adjust quickly. During the FM radio mode, press the Preset button to play preset stations. Press the button again to move to next preset station in cycle (Preset 1 -> 2 ... ->6). S E N I L G N D L O F I S E N I L G N D L O F I 4. SETTING THE ALARM / RGLAGE DE L'HEURE 02 Bluetooth PM Alarm 1 S n o o z e I D i m m e r Sleep Al 1 Alarm 2 Radio Buzzer Al 2 The Default Alarm 1 time is 6:00am. 7. BLUETOOTH / AUXIN Select Bluetooth from the source of your music.
(FM radio > aux-in > Bluetooth). Mode Hold the Bluetooth button to pair with a new device Talk Talk Press the + or - button to adjust the time. Hold the + or - button to adjust quickly. Go to "Settings" and Bluetooth from your mobile device Bluetooth PM Sleep Al 1 Bluetooth PM Sleep Al 1 Radio Buzzer Al 2 Radio Buzzer Al 2 iLuv Morning Call 2 When paired, the main unit will make a chime bell sound and the Bluetooth indicator will stay on. Turn on Bluetooth Bluetooth PM Sleep Al 1 Radio Buzzer Al 2 Press the + or - button to select wake to radio or buzzer.
* Press the << or >> button to change track. Hold the << or >> to rewind or fast forward within the song The Radio or Buzzer indicator will ash.
(Default is buzzer) Alarm 1 S n o o z e I D i m m e r Alarm Talk 2 If a phone call comes in, press the Talk button to answer the call or press the End button to reject the call. Press the End button to end the call. End The volume level will ash. To set the wake up sound volume Complete Aux-In Mode Select Aux-in from the source of your music.
(FM radio > aux-in > Bluetooth). Anytime you press the End button you save the settings and exit. If you do not press any buttons for 5 ~ 10 seconds, the displayed alarm time will be set up and go back to the previous mode. Talk Mode Set up the Alarm 2 in the same way. The Default Alarm 2 time is 7:00 am.
* Press the << or >> button to change track. Hold the << or >> to rewind or fast forward within the song iLuv, TimeShakerTM, and GreeNology trademarks are the exclusive properties of jWIN Electronics Corp. and are registered with the U.S. Patent and Trademark Oce, and may be registered or pending registration in other countries. All other iLuv trademarks, service marks, and logos may be registered or pending registration in the U.S. or in other countries. All other trademarks or registered trademarks are the property of their respective owners. 2016 iLuv Creative Technology. Printed in China.
(FRONT)
(BACK) FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.