iMage A2 Bluetooth Conference Speakerphone Packing 1. iMage A2 Bluetooth Conference Speakerphone 2. Micro-USB cable 3. User manual Welcome!
Thank you for purchasing iMage A2 Bluetooth Conference Speakerphone; this instruction manual will guide you on how to start using this product. I/O Port buttons and slots 1. Increase volume 2. Lower volume 3. Mute 4: Mute microphone 5: Answer 6: Hang up 7: Mode selection 8: Mode status indicator 9: Power status indicator AUX IN LED Indicator 10: Audio In 11. USB Slot 12. Power switch Bluetooth Mode USB Mode AUX Mode Adapter Mode Power status/Charging Charing First!
Please connect the USB cable to iMage A2 Bluetooth Conference Spea-
kerphone to charge it; it is recommended to fully charge the power for approximately 6 hours (charge until power indicator goes o) before using it for the rst time. Power Status When the power is turned on, if one of the four mode indicators on the right has a blue light on, it means that the unit is currently powered-on. Charging: When the orange light is constantly on, it means that it is currently charging; when the orange light goes o, it means that charging is complete. Power remaining: If the blue light ickers it means that there is sucient power remaining; if the red light ickers it means that power is low and requires charging. Specification Dimensions: 165mm X 165mm X 55mm Product weight: 3605g Bluetooth version: Bluetooth v3.0+EDR/HFP/A2DP/WBS Communication time: 6~8 hr.(BT) Playback time: 6~8 hr.(BT), 8~10 hr.(AUX) Standby time: 48~60 hr.(BT) Battery capacity: 950mAH Reception angle: Omni-Directional Operating frequency: 2402MHz-2480MHz Reception distance: 0.3~3m Audio output: Bluetooth/USB Audio input: Bluetooth/USB/AUX Module type: GFSK Antenna type: Build-in Antenna Operating environment: 0 ~ 70
* Note: Data listed above were measured by actual testing in laboratories;
actual data may differ according to usage scenarios. Start Turn on the power and start iMage A2 Bluetooth Conference Speakerphone; press the (mode selection) button to select the mode you need. Note: The battery life will signicantly decrease if your device has not been charged for a lone time.Therefore, we recommend you to charge your device at least once every week. Mode selection: Bluetooth Mode You can connect other portable devices or computer using Bluetooth connection to make iMage A2 Bluetooth Conference Speakerphone your multimedia speakerphone. Connection method:
1. Select Search for Bluetooth device on the device you want to connect. 2. You will see iMage A2_XX (number diers according to the dierent devices); click on it to perform pairing. 3. Pairing complete. Blue light remains constantly on: Bluetooth device has successfully connected with iMage A2 Bluetooth Conference Speakerphone, and supports HFP and A2DP.
* If the device could not be paired, you can clear the previous pairing data to pair it over again; press and hold the hang up button for 3 seconds and wait until you hear the prompt then release it to search for iMage A2 Bluetooth Conference Speakerphone again for pairing.
* Please conrm the Bluetooth chip built in the computer before connecting to a PC or notebook using Bluetooth Mode, and download the related driver programs etc. from the original manufacturer of the chip; please refer to the user manual of your computer for details. Mode selection: AUX Mode You can make iMage A2 Bluetooth Conference Speakerphone an expansion speaker by connecting it to a signal source using a 3.5 audio cable. Connection method: Connect the audio output of the device (PC, NB etc.) to the Audio In socket(3.5 jack) of iMage A2 Bluetooth Conference Speakerphone. Statement This product complies with the provisions of the low-power radio wave radiation Administrative Regulations Article XII-XIV etc.
* Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
* The low power radio-frequency devices shall not inuence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.
* The said legal communications means radio communications is operated in compliance with the Telecommunications Act.
* The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Contact Us!
1. Website Introduction: http://www.iMagetech.com.tw (provides the newest support information and online user manual) 2. E-mail address: http://www.iMagetech.com.tw/contact.php 3. Please call: 886-2-27967041 4. Address: 5F., No.16, Aly. 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114 Notice: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Mode selection: USB Mode You can connect to a PC or notebook through Micro-USB to make iMage A2 Bluetooth Conference Speakerphone your expansion speakerphone set. Connection method:
1. First connect the USB cable to the Micro-USB jack of iMage A2 Bluetooth Conference Speakerphone. 2. Wait for the computer to automatically install the drivers (please rst conrm that your computer is connected to the internet). 3. Set the Playback device and Reception device of the computer as iMage A2.
* To use iMage A2 Bluetooth Conference Speakerphone with specic application programs, you must rst go to the programs settings to select the Playback device and Reception device. Mode selection: Adapter Mode (optional purchase) You can purchase the iMageTech MCU4 Speakerphone System or iMage A1 Bluetooth Adapter Tx/Rx additionally to connect the audio input and output of the video device, making iMage A2 Bluetooth Conference Speakerphone your external auxiliary speakerphone for your video set. Connection method:
1. Connect the iMageTech MCU4 Speakerphone System or iMage A1 Bluetooth Adapter Tx/Rx output/input to the audio input/output of the video device. 2. Connect the iMageTech MCU4 Speakerphone System or iMage A1 Bluetooth Adapter Tx/Rx power and press the connect (Bluetooth connection) button. 3. iMage A2 Bluetooth Conference Speakerphone will automatically connect with the adapter.
* Please refer to the user manual of iMageTech MCU4 Speakerphone System or iMage A1 Bluetooth Adapter Tx/Rx for detail setting process. FAQ I hear continuous burst noises
* Bluetooth is a wireless technology and is very sensitive to the objects between the connected devices.If there are no large objects
(such as walls etc.) blocking between iMage A2 Bluetooth Conference Speakerphone and the connected device, the maximum allowed distance between the two can reach up to 10 meters. I cannot receive calls using iMage A2 Bluetooth Conference Speakerphone
* Please conrm that the mode selected is Bluetooth Mode.
* Please conrm that iMage A2 Bluetooth Conference Speakerphone has successfully paired with your device.
* Please increase the volume of iMage A2 Bluetooth Conference Speakerphone. I had problems during pairing
* You may have accidently deleted the pairing data during operation.
- Please refer to the pairing instructions in the Bluetooth Mode chapter.Problems faced when playing music from music devices
(mobile phones, PC, MP3 players etc.)
* Please conrm that other devices support Bluetooth 3.0
(downwards compatible) and A2DP, or else it will not be able to operate.Please refer to the user manual of the device used, and nd out how to pair it with the Bluetooth playback device.