USER MA ROCKERZ 255 Ax
(1) 1x Rockerz 255 Max
(2) 1x Manual
[3] 1x Warranty Card MFB/Triple EQ/Beast mode Volume Up / Next Track Volume Down / Prev. Track
(4) 1x USB Type C charging cable
[5] 1x Catalogue
(6) 1x Pairs of additional earmuffs
(Small & Large) Made for the Gamers - By Gamers, BEAST Mode reduces the latency significantly and improves the overall gaming experience.
(14)ENx Tech: Our ENx tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx as the mic is equipped with the same and activated by default. Deliver your voice without interruptions anywhere - traffic, railway stations, airports, work space; literally anywhere!
(15)Voice Assistant: Long press the MFB for 2 seconds to wake up smart voice assistant. Note: /f the voice assistant doesnt get triggered then the functionality has to be first enabled by your media device. Use the provided USB Type C charging cable to charge the earphones through either laptop / adaptor/ powerbank.
(1) Low Battery: When the remaining battery is below 10%, there is a Battery Low prompt every few minutes and red LED quickly flashes to indicate the same.
(2) Charging: Solid red LED indicates that the earphone is being charged (please note that the earphone cannot / should not be turned on while charging).
(3) Fully charged: Solid white LED indicates the same. Bluetooth Version V5.3 Operating Range 10m Frequency 20Hz~-20kHz Driver Size 10mm*2 Battery 260mAh Talk time Up to 60 hours Music time Up to 60 hours (at 60% vol) Bluetooth Range HFP/HSP/A2DP/AVRCP Charging Time About 1 hour Charge Interface USB Type C BEAST Mode Yes Low Latency About 60ms Water Resistance IPX5 ASAP Charge Yes
(1) When switched off, separate left and right earbuds to switch on the wireless neckband and put them into pairing mode. The earphones automatically enter pairing mode with white and red LED flashes alternatively to indicate the same.
(2) Open Bluetooth functionality on your media device and search for Rockerz 255 Max from the list of available devices.
(3) Choose Rockerz 255 Max from the list and if asked for a passcode, enter the pairing code OOOO to establish Bluetooth connectivity.
(4) Once successfully connected, the white LED flashes once every 5 seconds to indicate the same Note: The wireless neckband automatically turns off if there is no pairing established in 5 minutes.
(1)Power On: When switched off, separate both the earbuds from each other. White LED flashes to indicate the same.
(2)Power Off: In powered on state, unite both the earbuds together. Red LED flashes to indicate the same.
(3)Play/Pause: Short press the MFB (Multi-function Button) to play/pause music at your convenience.
(4)Volume Up: Short press the Volume Up + button in steps to increase the volume. A voice prompt indicates maximum volume.
(5)Volume Down: Short press the Volume Down - button in steps to decrease the volume.