Soundcube User Guide Please read these instructions completely before operating this product TDKperformance.eu V513 Soundcube User Guide Please read these instructions completely before operating this product TDKperformance.eu V513 AC CONNECTION OPERATION US AC Plug Shown 1. Select the appropriate plug for your country and connect it to the AC power adapter. 2. Connect the AC power adapter jack to the DC IN jack y on the rear of the unit and then connect the plug to a 100V-240V wall outlet. Notes:
Only use the supplied AC adapter. Remove both the DC plug and AC-IN plug to disconnect AC adapter when not in use. Replacing the Remote Control Battery:
1. Remove the Battery Compartment by pressing in on the tab and then sliding the compartment out. 2. Install a CR2025 battery, paying attention to the polarity diagram in the compartment
(positive side up). 3. Replace the Battery Compartment. LOCATION OF CONTROLS 1 2 1. Carrying Handle 2. Power/Volume Control 3. Source/Select Control 4. Remote Sensor 5 6 5. DC IN Jack 6. Main Power (OFF/ON) Switch 7. AUX Jack 8. USB CHARGE Jack OFF X 9 10 11 12 AUX 13 14 9. OFF Button 10. Power Button 11. Bluetooth Button 12. AUX Button 13. Mute Button 14. Volume Buttons 3 4 7 8 AUX Jack (Rear of Unit) Insert one end of an audio cable (not included) into the LINE OUT jack on your external audio unit and the other end into the AUX jack y on the rear of this unit. To listen to the external audio unit, turn this unit on and turn on the external unit as well. Press the Source/Select control w once so all the modes light. Rotate the Source/Select control w to the AUX position to select the Line In mode. Start playback of the external unit and the external audio units output sound will be heard through this units speakers. Turning the Unit On and Off:
1. The main power switch is on the rear of the unit. Slide to the ON position to turn the unit on and activate the Power/Volume control on the main unit and the Power button on the remote. 2. Once the main power switch is turned on, you can turn the unit on or off by pressing the Power/Volume control v on the main unit. If using the remote, press the Power button at to turn the unit on. Press the OFF button X to turn the unit off. Pairing a Bluetooth Device 1. Turn the unit on; the previously listened to source and volume will be selected. 2. Press the Source/Select control w once so all the modes light. Rotate the Source/
Select control w to the Bluetooth (
) position to select the Bluetooth mode. 3. Press and hold the Source/Select control w until the Bluetooth indicator blinks to make the speaker discoverable. 4. On the bluetooth device, enable bluetooth and select V513 from the Device List. If the bluetooth device asks for a passkey, use 0000. Some bluetooth devices will ask you to accept the connection. If the units are paired properly, the speaker will beep and the Bluetooth indicator will light solid. If it failed, the Bluetooth indicator will blink slowly. Note: After you pair a device, this unit will remember it for future use. Using a Bluetooth Device 1. Turn the unit on; the previously listened to source and volume will be selected. 2. With a unit paired (see previous section), press the Source/Select control w once so
)position all the modes light. Rotate the Source/Select control w to the Bluetooth (
to select the Bluetooth mode. 3. Operate your Bluetooth device and its sound will be heard through this units speakers. 4. Adjust the volume using the Power/Volume control v on this unit, or the Volume control on the Bluetooth device, and adjust the Bass and Treble as described later in this guide. 5. To mute the sound, press the Mute button am on the remote control. IMPORTANT: After step 2, you have two minutes to pair the units. Charging a Bluetooth Device with this Unit On the rear of this unit is a USB jack that can be connected to a USB device, which will charge if the unit is connected to AC power. Setting the EQ and Bass 1. TREBLE: Press the Source/Select control w once so all the modes light. Rotate the Source/Select control w to the TRE (Treble) position. Adjust the setting using the Power/Volume control v. 3. BASS: Press the Source/Select control w once so all the modes light. Rotate the Source/Select control w to 2x for double bass, or 4x for quadruple bass. Note: If no setting has taken place for five seconds, the unit will exit the Bass/Treble setting mode and will revert to the previous mode. Auto Power Off If the unit has no audio signal, and/or a USB device is not charging, for 20 minutes, the unit will turn itself off. To wake the unit up, simply press the Power/Volume control v on the main unit or the Power button at on the remote control. SPECIFICATIONS AND COMPATIBILITY GENERAL:
Power Source (AC) .. DC 18V Adapter (Center Positive) Speakers. ..........4 x 2 inch full-range drivers, 1 x 5.25
..........inch subwoofer, 2 x 5.25 inch passive radiators Output Power ................... 3W x 4 + 15W (subwoofer) Weight. .............................................................[tbd]
Dimensions ....................9 (W) x 9 (H) x 9 (D) inches. Wireless Audio. ....Bluetooth version 2.1-A2DP profile Line-input Audio. ... 3.5mm stereo jack up to 2.5Vrms
...............................................................input signal USB Port. ............................ 5 V @ 2.1 A charge only Press one of the Mode buttons (Bluetooth, AUX) to access the respective mode. Specifications are subject to change without notice. The TDK Life on Record Logo is a trademark of TDK Corporation and is used under license. All other trademarks and logos are property of their respective owners. 63952719-A Soundcube User Guide Please read these instructions completely before operating this product TDKperformance.eu V513 Soundcube User Guide Please read these instructions completely before operating this product TDKperformance.eu V513 THIS WILL GO AT THE END OF THE MANUAL --------------------------
Imation Europe B.V. Siriusdreef 46-52 2132 WT Hoofddorp The Netherlands www.tdkperformance.eu Imation Singapore Pte. Ltd. Unit 02-02 New Tech Park 151 Lorong Chuan Singapore 556741 www.tdk-media.com.sg Imation Enterprises Corp. 1 Imation Way, Oakdale, MN 55128-3414 USA www.tdkperformance.com Imation ANZ Pty Ltd Unit 2, 1 Coronation Avenue Kings Park, NSW 2148 www.tdkperformance.com.au 150-0001 5-52-2 www.tdk-media.jp/
13251202 www.imation.com.cn/
www.imation.com.hk/
338II30
() TDK LoR 141-4 9
www.imation.co.kr Technical Assistance Assistance technique Technische Hilfe Technische assistentie Assistenza tecnica Asistencia tcnica Assistncia tcnica Pomoc techniczna Technick pomoc
US ....................................................................................................800-285-2783 DE/AT/CH ...................................................................................+49 2131 226 311 IT ...............................................................................................+39 022 1043 818 ES/PT ...........................................................................................+34 900 993 166 UK/IE ...................................................................................... +44 (0)1344 402201 NL/Other EU ............................................................................ +31 (0)23 521 2605 SG ....................................................................................................65-6499-7199 AU/NZ .................................................................................................800-225-013 JP .....................................................................................................0120-81-0536 CN ................................................................................................8621-6121-2122 KR .......................................................................................................02-2012-999 HK ...................................................................................................852-2161-2888