| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
TECHNICAL MANUAL REV.0 FCC EN V2 | Users Manual | 805.15 KiB | August 09 2021 | |||
| 1 |
|
Internal Photo | Internal Photos | 425.79 KiB | August 09 2021 | |||
| 1 |
|
External photo | External Photos | 1.77 MiB | August 09 2021 | |||
| 1 |
|
Product Label | ID Label/Location Info | 2.25 MiB | August 09 2021 | |||
| 1 |
|
FCB011 02 FCC Agent letter V3 | Cover Letter(s) | 143.29 KiB | August 09 2021 | |||
| 1 |
|
FCB012 02 FCC Confidentiality Request | Cover Letter(s) | 193.57 KiB | August 09 2021 | |||
| 1 |
|
FCB013 02 FCC Modular approval letter-Unlicensed | Cover Letter(s) | 142.42 KiB | August 09 2021 | |||
| 1 |
|
Power of Attorney Letter | Cover Letter(s) | 422.69 KiB | August 09 2021 | |||
| 1 |
|
R21021001 part 1 | Test Report | 3.51 MiB | August 09 2021 | |||
| 1 |
|
R21021001 part 2 | Test Report | 5.01 MiB | August 09 2021 | |||
| 1 |
|
R21021001 part 3 | Test Report | 5.77 MiB | August 09 2021 | |||
| 1 |
|
R21021001 part 4 | Test Report | 5.21 MiB | August 09 2021 | |||
| 1 |
|
R21021001 part 5 | Test Report | 3.39 MiB | August 09 2021 | |||
| 1 |
|
R21021001 part 6 | Test Report | 2.35 MiB | August 09 2021 | |||
| 1 |
|
RF EXPOSURE R21045001-FCC | RF Exposure Info | 1.64 MiB | August 09 2021 | |||
| 1 |
|
Setup Photo | Test Setup Photos | 593.79 KiB | August 09 2021 |
| 1 | TECHNICAL MANUAL REV.0 FCC EN V2 | Users Manual | 805.15 KiB | August 09 2021 |
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°1 of 25
Doc. Revision°:0
Date: 11/01/2021
RF TRANSCEIVER MODULE 2.4 GHz
FOR IMET RADIO REMOTE CONTROL SYSTEMS
MODEL B033
(M880 WAVE2; M880 MODIN; M880 SAC; M880 SDC; M880 MAC)
TECHNICAL MANUAL
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°2 of 25
Doc. Revision°:0
Date: 11/01/2021
Copyright
This technical manual is for internal use by IMET s.r.l. only to facilitate the developments and
production of the IMET Radio remote controls of the M880 series:
and for the receiver units (base station)
• M880 WAVE2;
• MODIN
• M880 SDC;
• M880 SAC;
• MAC
all these projects can mount the B033 module for communication.
It is strictly forbidden to reproduce any part of this manual, in any form, without the explicit written
permission of the company IMET s.r.l. . The contents of this manual can be changed without notice.
Every care has been taken in compiling and of the documentation contained in this manual.
However, IMET declines any responsibility deriving from using this manual, or from any errors or
contained herein.
Furthermore, IMET cannot be held responsible for damages or problems deriving from using non-
original accessories or spare parts.
Conventions used in this document
This symbol indicates instructions to be strictly followed for the RF B033 module to
work properly
This symbol indicates useful suggestions for the proper use of the B033 module
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°3 of 25
Doc. Revision°:0
Date: 11/01/2021
Table of contents
1.0 Device Overview and Description ...................................................................... 5
1.1 Main technical Characteristics and Features ...................................................................... 6
1.2 Main Application ............................................................................................................... 7
1.3 Main Operational characteristics and storage .................................................................... 7
1.4
List of available RF channel from 2.404GHz to 2.479 GHz ................................................... 8
2.0 Foto of the Device ........................................................................................... 10
Top side with Shield ......................................................................................................... 10
Bottom side ..................................................................................................................... 10
3.0 Device Marking plate ....................................................................................... 11
4.0 Device PIN Diagram and Layout ....................................................................... 12
4.1
PIN Description table ....................................................................................................... 13
5.0 Mounting Details ............................................................................................. 14
5.1 Module Dimension Details ............................................................................................... 15
External Antenna for B033 ............................................................................................... 16
Electrical Characteristics .................................................................................................. 17
6.0 Approval and Certification ............................................................................... 18
A.1 United State .................................................................................................................... 19
2.1
2.1
5.2
5.3
Labelling and User Information Requirements ........................................................................................ 20
RF Exposure ............................................................................................................................................ 21
Approved External Antenna Types .......................................................................................................... 21
A.2
Canada ........................................................................................................................... 22
Labelling and User information Requirements ........................................................................................ 22
Approved External Antenna type ............................................................................................................ 23
A.3
Europe ............................................................................................................................ 25
A.1.1
A.1.2
A.1.3
A.2.1
A.2.2
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°4 of 25
Doc. Revision°:0
Date: 11/01/2021
Labelling and User Information Requirements ........................................................................................ 25
External Antenna Requirements ............................................................................................................. 25
A.3.1
A.3.2
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°5 of 25
Doc. Revision°:0
Date: 11/01/2021
1.0 Device Overview and Description
The B033 RF 2.4GHz module has been designed to extend wireless communication in IMET radio
control systems in the 2.4GHz to 2.4835GHz band, making 38 channels available in the assigned
band. The device is integrated into the logic units of the IMET industrial remote control systems, to
allow greater coverage and reliability in the communication between the remote unit (radio control
or transmitter unit M880 WAVE2) and the base station (receiver unit M880 SAC; M880 SDC).
The B033 module mounts two antennas with U.FL 50Ω connectors to ensure greater coverage and
stability in radio communication.
The B033 is assembled by welding and has its own internal voltage regulators one for the RF part
and one for the microcontroller logic part and its own oscillators.
The module can it be easily integrated (surface mount) with M880 systems, freeing up the design
dedicated to the RF communication part and from the compliance tests with the reference
standards listed in the section 6.0 “Approval and Certification” allowing more faster construction
times for the new M880 products.
The B033 module is approved for modular devices in the United States (FCC) and Canada (IC).
Modular approval removes the need for expensive RF and antenna design, and allows the end user
to place the B033 module inside a finished product and does not require regulatory testing for an
intentional radiator (RF transmitter).
To maintain conformance, refer to module settings in Annex A.1 for the United States and Annex A.2
for Canada.
The B033 module is an RED Directive assessed radio module for operation in Europe. The module
tests can be applied toward final product certification and Declaration of Conformity (DoC). To
maintain conformance for Europe, refer to module settings in Section ANNEX A.3. Additional testing
may be required depending on the end application.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°6 of 25
Doc. Revision°:0
Date: 11/01/2021
1.1 Main technical Characteristics and Features
B033 RF module is a Long Range 2.4GHz transceiver ideal for robust and reliable wireless solution
and in particular for IMET radio remote control systems M880 series listed in the section 1.0 “Device
overview”;
The main technical characteristics are listed in the following table
B033 MAIN CHARACTERISTICS
• High receiver sensitive up to -117 dBm;
• Size: 36,2 x 45,09 x 4,20 mm (L x W x H with shield)
• Wight: 8.00 g (with Shield)
•
Integrated crystal oscillator for RF and logic unit
• 2.4Ghz ISM band transceiver
• Up to 38 channels available and selectable
• Wide band transceiver at 812kHz per channel
• Spread spectrum modulation with forward error correction (FEC)
technique to increase the range and robustness of the radio
communication. It is superior immunity to interference
•
Internal voltage Regulator at 3.3 V with LDO (low Drop Out)
• Two External 50Ω Antenna Connector: Ultra Miniature Coaxial (U.FL),
50Ω
• Surface mountable in the IMET Remote control unit
• UART communication interface available
Table 1
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°7 of 25
Doc. Revision°:0
Date: 11/01/2021
1.2 Main Application
B033 is designed for industrial automation application and in particular for IMET radio REMOTE
control listed in section 1.0 “Device Overview”.
1.3 Main Operational characteristics and storage
RF transceiver B033 is designed to operated in the following environmental condition
- Operating Voltage range: 3,7Vd.c. to 5V d.c.;
- Operating Temperature Range: -25°C to + 55°C (-13°F to +131°F);
-
Storage Temperature Range: -40°C to +85°C (-40°F to +185°F);
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°8 of 25
Doc. Revision°:0
Date: 11/01/2021
1.4
List of available RF channel from 2.404GHz to 2.479 GHz
In the following table is reported the list of available channels than can be used by the B033 RF
module
List of Available Channels
Channel Number
Channel Frequency (GHz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
2.404
2.406
2.408
2.410
2.412
2.414
2.416
2.418
2.420
2.422
2.424
2.426
2.428
2.430
2.432
2.434
2.436
2.438
2.440
2.442
2.445
2.447
2.449
2.451
2.453
2.455
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°9 of 25
Doc. Revision°:0
Date: 11/01/2021
List of Available Channels
Channel Number
Channel Frequency (GHz)
27
28
29
30
31
32
33
34
35
36
37
38
2.457
2.459
2.461
2.463
2.465
2.467
2.469
2.471
2.473
2.475
2.477
2.479
Table 2 – List of available channels
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°10 of 25
Doc. Revision°:0
Date: 11/01/2021
2.0 Foto of the Device
2.1
Top side with Shield
2.1 Bottom side
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°11 of 25
Doc. Revision°:0
Date: 11/01/2021
3.0 Device Marking plate
B033 is marking with FCC ID: for Unite State as modular approval in accordance with Part 15.212
Modular Transmitter approval
B033 is marking with IC ID: for Canada as modular approval according to Radio Standards Specifica-
tion (RSS) RSS-210 and RSSGen.
B033 is CE marking according to EUROPEAN RED directive 2014/53/EU Essential Requirements for
Health and Safety (Article (3.1(a)), Electromagnetic Compatibility (EMC) (Article 3.1(b)), and Radio
(Article 3.2) and are summarized in Section 6.0 “Approvals and Certification” European Compliance
Testing.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°12 of 25
Doc. Revision°:0
Date: 11/01/2021
4.0 Device PIN Diagram and Layout
Figure 1 – Pin Layout
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°13 of 25
Doc. Revision°:0
Date: 11/01/2021
4.1
PIN Description table
Power enable; Power ON / Power OFF the RF module
Type
LDO
Description
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Power supply input
General porpouse digital input /output use only for debug
UART Serial communication data input
UART Serial communication data output
Digital input for frequency change request
Symbol
PWDN
GND
GND
GND
GND
VREG
LED1
DATA -RX
DATA-TX
CFA-REQ
GND
JTMS
RESET
JTCK
JTDO
3.3V
Power
GPIO
DI
DO
DI
JTAG
Reset
JTAG
JTAG
3.3V
TM_EN
GPIO
Reserved for internal used
Ground
Ground
Test mode select
Microcontroller Reset PIN
JTAG signal
JTAG signal
Table 3
DO = Digital Output ; DI = Digital Input; GPIO = general porpouse input output
Power supply for microcontroller during programming phase
PIN
J65
J94
J92
J93
J80
J63
J62
J5
J8
J74
J67
J64
J69
J70
J71
J72
J73
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°14 of 25
Doc. Revision°:0
Date: 11/01/2021
5.0 Mounting Details
The B033 2.4GHz module is a surface mountable module and module dimension are shown in figure
3. The module B033 is 1,0mm (0,038”) thick with castellated mounting point on the edge.
In the host PCB of the B033 module it is recommended to extend the ground plane at least 5mm
(0,2”) around the module.
The module was assembled using standard lead free reflow profile The module is compatible with
lead-free solder reflow profiles. To avoid damaging the module, the following
standard
recommendations are given:
• Refer to the solder paste data sheet for specific reflow profile recommendations;
• Use no-clean flux solder paste;
• Do not wash as moisture can be trapped under the shield;
• Use only one flow. If the PCB requires multiple flows, apply the module on the last flow;
The B033 has 50Ω ultra miniature coaxial (U.FL) connector.
Caution: The U.FL connector is fragile and can oly tollerate very
limited number of insertions and disinsertions
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°15 of 25
Doc. Revision°:0
Date: 11/01/2021
5.1 Module Dimension Details
Figure 3 – Dimension Details
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°16 of 25
Doc. Revision°:0
Date: 11/01/2021
External Antenna for B033
5.2
The B033 module has a 50Ω ultra-miniature coaxial (U.FL) connector to connect to an external
2.4GHz antenna. Modular certification of the B033 module is performed with the external antenna
types listed in the following table:
TESTED EXTERNAL ANTENNA TYPES
IMET CODE
TYPE
Nominal Gain
Description
AN110
RFA-02-P05-70B-150
2 dBi (Peak)
Internal Antenna with
U.FL connector 2,4GHz
PEAK GAIN 2 dBi with
CABLE 250mm
Internal Antenna with
U.FL connector 2,4GHz
PEAK GAIN 2 dBi with
CABLE 100mm
AN110/A
RFA-02-P05-70B-150
2 dBi (Peak)
Table 4
An antenna type comprises antennas having similar in-band and out-of-band radiation patterns.
Refer to Section Regulatory Approval for specific regulatory requirements by country.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°17 of 25
Doc. Revision°:0
Date: 11/01/2021
5.3
Electrical Characteristics
Description
Ambient Operating
Temperature
Supply voltage Range
Current consumption
Receiver Characteristics
Parameters
RF Input Frequency
RF sensitivity
Max RF Input
Blocking immunity
Adjacent channel rejection
Maximum Tollerance
frequency offset between
transmiter and receiver
without sensitive
degradation,
Transmitter Characteristics
Parameters
RF Carrier Frequency range
RF Output Power
Raw data rate
FSK frequency deviation
Crystal oscillator frequency
Channels Number
Channel Nomial Bandwith
Condition
–
–
TX mode at
maxmiun
Output Power
RX mode
Sleep mode
Condition
50Ω
@ +/- 1 MHz
@ +/- 2 MHz
@ +/- 10 MHz
Condition
50Ω
Min
-25
3.7
Min
2.404
-50
Min
2.404
-18
62.5
Table 5 – Electrical Characteristics
Technical Data
Typical
4.2
55
45
40
Typical
-117
60
63
81
37
Typical
14.27
52
38
812
Max
+55
5.0
Max
2.479
10
+50
Max
2.479
+10
1000
Unit
°C
V
mA
mA
mA
Unit
GHz
dBm
dbBm
dB
dB
dB
dB
ppm
Unit
GHz
dbBm
Kb/s
kHz
MHz
KHz
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°18 of 25
Doc. Revision°:0
Date: 11/01/2021
6.0 Approval and Certification
RF 2.4GHz module B033 is complying with the following Directive, Standards and Regulations
- CE marking according to European RED Directive 2014/53/EU and 2011/65/EU and
Delegated Directive 2015/863/EU on the Restriction of Hazardous Substances (RoHS) with
the following reference standard
ESTI EN 301 489-1:2019 V2.2.3
ETSI EN 301 489-17: 2020 V3.2.4
ETSI EN 300 328:2019 V2.2.2
EN 62368-1:2014 + A11:2017
EN 62479:2010
- FCC (Federal Communications Commission) Part 15
PART 15.207:2019
PART 15.209:2019
PART 15.247:2019
IC (Industrial Canada) RSS-247 issue 2:2017
Operation is subject to the following two conditions:
(1)
(2)
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
-
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°19 of 25
Doc. Revision°:0
Date: 11/01/2021
ANNEX A - Regulatory Approval
This section outlines the regulatory information for the B033 module for the following countries:
• United State;
• Canada;
• Europe;
is
received Federal Communications Commission
A.1 United State
The B033 module
(FCC) CFR47
Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in accordance
with Part 15.212 Modular Transmitter approval. Modular approval allows the end user to integrate
the B033 module into a finished product without obtaining subsequent and separate FCC approvals
for intentional radiation, provided no changes or modifications are made to the module circuitry.
Changes or modifications could void the user's authority to operate the equipment. The end user
must comply with all of the instructions provided by the Grantee, which indicate installation and/or
operating conditions necessary for compliance.
The finished product is required to comply with all applicable FCC equipment authorizations
regulations, requirements and equipment functions not associated with the transmitter module
portion. For example, compliance must be demonstrated to regulations for other transmitter
components within the host product; to requirements for unintentional radiators (Part 15 Subpart B
“Unintentional Radiators”), such as digital devices, computer peripherals, radio receivers, etc.; and
to additional authorization requirements for the non-transmitter functions on the transmitter
module (i.e., Verification, or Declaration of Conformity) (e.g., transmitter modules may also contain
digital logic functions) as appropriate.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°20 of 25
Doc. Revision°:0
Date: 11/01/2021
A.1.1 Labelling and User Information Requirements
The B033 module has been labelled with its own FCC ID number, and if the FCC ID is not visible
when the module is installed inside another device, then the outside of the finished product into
which the module is installed must also display a label referring to the enclosed module. This
exterior label can use wording as follows:
Contains Transmitter Module FCC ID: 2AYRTB033 or Contains FCC ID:2AYRTB033 This device complies
with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation
A user’s manual for the product should include the following statement:
This equipment has been tested and found to complying with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°21 of 25
Doc. Revision°:0
Date: 11/01/2021
WARNING:
Changes or modifications made to this equipment not expressly approved by IMET may void the FCC
authorization to operate this equipment.
A.1.2 RF Exposure
All transmitters regulated by FCC must comply with RF exposure requirements.
If appropriate, compliance with exposure guidelines for mobile and unlicensed devices can be
accomplished by the use of warning labels and by providing users with information concerning
minimum separation distances from transmitting structures and proper installation of antennas. The
following statement must be included as a CAUTION statement in manuals and OEM products to
alert users of FCC RF exposure compliance:
To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a
separation distance of 20 cm or more should be maintained between the antenna of this device and
persons during operation. To ensure compliance, operation at closer than this distance is not
recommended. The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
If the B033 module is used in a portable application (i.e., the antenna is less than 20 cm from
persons during operation), the integrator is responsible for performing Specific Absorption Rate
(SAR) testing in accordance with FCC rules 2.1091.
A.1.3 Approved External Antenna Types
To maintain modular approval in the United States, only the antenna types that have been tested
shall be used. It is permissible to use different antenna manufacturer provided the same antenna
type and antenna gain (equal to or less than) is used.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°22 of 25
Doc. Revision°:0
Date: 11/01/2021
Testing of the B033 module was performed with the antenna types listed in Tested External Antenna
Types on section 5.2.
A.2 Canada
The B033 module has been certified for use in Canada under Industry Canada (IC) Radio Standards
Specification (RSS) RSS-210 and RSSGen. Modular approval permits the installation of a module in a
host device without the need to recertify the device.
A.2.1 Labelling and User information Requirements
Labelling Requirements for the Host Device (see RSS-Gen , issue 5,Amendment 2 (February 2021),
chapter 4): The host device shall be properly labelled to identify the module within the host device.
The Industry Canada certification label of a module shall be clearly visible at all times when installed
in the host device, otherwise the host device must be labelled to display the Industry Canada
certification number of the module, preceded by the words “Contains transmitter module”, or the
word “Contains”, or similar wording expressing the same meaning, as follows:
Contains transmitter module IC:
User Manual Notice for License-Exempt Radio Apparatus (see RSS-Gen , issue 5, Amendment 2
(February 2021), chapter 8.4): User manuals for license-exempt radio apparatus shall contain the
following or equivalent notice in a conspicuous location in the user manual or alternatively on the
device or both:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°23 of 25
Doc. Revision°:0
Date: 11/01/2021
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Transmitter Antenna (see RSS-Gen , issue 5, Amendment 2 (February 2021), chapter 6.8): User
manuals for transmitters shall display the following notice in a conspicuous location:
This radio transmitter 26923-B033 has been approved by Innovation, Science and Economic
Development Canada to operate with the antenna types listed below, with the maximum permissible
gain indicated. Antenna types not included in this list that have a gain greater than the maximum
gain indicated for any type listed are strictly prohibited for use with this device.
Cet émetteur radio 26923-B033 a été approuvé par Innovation, Sciences et Développement
économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous, avec le gain
maximal autorisé indiqué. Les types d'antenne non inclus dans cette liste qui ont un gain supérieur
au gain maximum indiqué pour tout type répertorié sont strictement interdits pour l'utilisation avec
cet appareil.
Immediately following the above notice, the manufacturer shall provide a list of all antenna types
approved for use with the transmitter, indicating the maximum permissible antenna gain (in dBi)
and required impedance for each.
A.2.2 Approved External Antenna type
Transmitter Antenna (from RSS-Gen , issue 5,Amendment 2 (February 2021)chapter 6.8):
The B033 (26923-B033) module can only be operated with antennas with which it was approved.
Transmitter may be approved with multiple antenna types. An antenna type comprises antennas
having similar in-band and out-of-band radiation patterns. Testing shall be performed using the
highest gain antenna of each combination of transmitter and antenna type for which approval is
being sought, with the transmitter output power set at the maximum level. Any antenna of the
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°24 of 25
Doc. Revision°:0
Date: 11/01/2021
same type having equal or lesser gain as an antenna that had been successfully tested with the
transmitter, will also be considered approved with the transmitter, and may be used and marketed
with the transmitter. When a measurement at the antenna connector is used to determine RF
output power, the effective gain of the device's antenna shall be stated, based on measurement or
on data from the antenna manufacturer. For transmitters of output power greater than 10 milliwatts,
the total antenna gain shall be added to the measured RF output power to demonstrate compliance
to the specified radiated power limits. Testing of the B033 module was performed with the antenna
types listed in Section 5.2 “External Antenna for B033”.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
TECHNICAL MANUAL
RF TRANSCEIVER MODULE 2.4GHz
B033
Page n°25 of 25
Doc. Revision°:0
Date: 11/01/2021
Europe
A.3
The B033 module is an RED Directive (2014/53/EU) assessed radio module that is CE marked and
has been manufactured and tested with the intention of being integrated into a final product.
The B033 module has been tested to RED Directive 2014/53/EU Essential Requirements for Health
and Safety (Article (3.1(a)), Electromagnetic Compatibility (EMC) (Article 3.1(b)), and Radio (Article
3.2) and are summarized in Section 6.0 “Approvals and Certification” European Compliance Testing.
To maintain conformance to the testing listed in Section 6.0 “Approvals and Certification”: European
Compliance Testing, the module shall be installed in accordance with the installation instructions in
this data sheet and shall not be modified. When integrating a radio module into a completed
product the integrator becomes the manufacturer of the final product and is therefore responsible
for demonstrating compliance of the final product with the essential requirements of the RED
Directive.
A.3.1 Labelling and User Information Requirements
The label on the final product which contains the B033 module must follow CE marking
requirements.
A.3.2 External Antenna Requirements
Provided the integrator installing an assessed radio module with an integral or specific antenna and
installed in conformance with the radio module manufacturer's installation instructions requires no
further evaluation under Article 3.2 of the RED Directive and does not require further involvement
of an RED Directive Notified Body for the final product.
The European Compliance Testing listed in Section 6.0 “Approval and Certification” was performed
using the antenna types listed in section 5.2 “External Antenna Types”.
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. (+39) 04347878 – Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: info@imet.eu
| 1 | FCB011 02 FCC Agent letter V3 | Cover Letter(s) | 143.29 KiB | August 09 2021 |
Date: 08/07/2021
DEKRA Testing and Certification, S.A.U.
Parque Tecnológico de Andalucía
C/ Severo Ochoa 2 & 6
29590 Campanillas
Málaga, España
Ref: Agent letter for FCC ID: 2AYRTB033
We,
hereby authorize
IMET s.r.l.
Via Ronche, 93 33077
Sacile (PN) - ITALY,
CMC Centro Misure Compatibilita Srl
Via della Fisica, 20
36016 Thiene
Vicenza, Italy
Mr. /Ms. Fabio Carraro
e-mail: fcarraro@cmclab.it
Phone: +39 0445 367702
to act as our agent in the preparation of this application for equipment certification, including the
signing of all documents relating to these matters.
The present authorization considers the development of documents on behalf of the client,
written under his own letterhead and related to the necessary information to be provided on his
behalf to complete the certification process.
We also hereby certify that neither we nor any party to this application are subject to a denial of
U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug
Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled
substance.
For instances where our authorized agent signs the application for certification on our behalf, I
acknowledge that all responsibility for complying with the terms and conditions for Certification,
as specified by DEKRA Testing and Certification, S.A.U., still resides with us.
This agreement expires one year from the current date.
Sincerely,
__________________________
By:
Title:
Company: IMET s.r.l.
Telephone: +39 0434 787811
e-mail: simone.dario@imet.eu
Mr. Simone Dario
Compliance Manager
FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless
| 1 | FCB012 02 FCC Confidentiality Request | Cover Letter(s) | 193.57 KiB | August 09 2021 |
Date: 08/7/2021
DEKRA Testing and Certification, S.A.U.
Parque Tecnológico de Andalucía
C/ Severo Ochoa 2 & 6
29590 Campanillas
Málaga, España
Ref: Confidentiality request for FCC ID: 2AYRTB033
To whom it may concern:
Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the
Freedom of Information Act, IMET s.r.l. hereby request requests that a part of the subject FCC application
be held confidential to avoid release of sensitive information of the product to the public.
For the product stated above, we request that the following information be withheld from public disclose:
Permanent
Type of Confidentiality Requested
Short Term
Short Term
Short Term
Short Term
Short Term
Short Term
Short Term
Short Term
Short Term
Permanent
Permanent
Permanent
Permanent
Exhibit
Block Diagrams
External Photos
Internal Photos
Operation Description
Parts List & Placement/BOM
Tune-Up Procedure
Schematics
Test Setup Photos
User’s Manual
Permanent Confidentiality:
The above materials contain trade secrets and proprietary information not customarily released to the
public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our
competitors.
Short-Term Confidentiality:
We hereby request short-term confidentiality for the product stated above to avoid premature release of
sensitive information prior to marketing or release of the product to the public.
Release date of short term confidentiality is:
45 days from grant date marked
90 days from grant date marked
135 days from grant date marked
180 days from grant date marked
Specific date:
We are also aware that we are responsible to notify AT4 wireless in the event information regarding the
product or the product is made available to the public. AT4 wireless will then release the documents listed
above for public disclosure pursuant to FCC Public Notice DA 04-1705.
Sincerely,
__________________________
By:
Title:
Company: IMET s.r.l.
Telephone: +39 0434 787811
Mr. Simone Dario
Compliance Manager
e-mail: simone.dario@imet.eu
FCB012_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless
| 1 | FCB013 02 FCC Modular approval letter-Unlicensed | Cover Letter(s) | 142.42 KiB | August 09 2021 |
Date: 08/07/2021
DEKRA Testing and Certification, S.A.U.
Parque Tecnológico de Andalucía
C/ Severo Ochoa 2 & 6
29590 Campanillas
Málaga, España
Ref: FCC Modular approval letter for FCC ID: 2AYRTB033
To whom it may concern:
The following attestation addresses the requirements to support modular approval pursuant to
§15.212 of the Commission’s Rules:
Modular approval requirement
Yes No*
X
(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal
and tuning capacitors may be located external to the shielded radio elements.
(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided)
to ensure that the module will comply with part 15 requirements under conditions of excessive data
rates or over-modulation.
(iii) The modular transmitter must have its own power supply regulation.
(iv) The modular transmitter must comply with the antenna and transmission system requirements
of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ
a “unique” antenna coupler (at all connections between the module and the antenna, including the
cable). The “professional installation” provision of §15.203 is not applicable to modules but can
apply to limited modular approvals under paragraph (b) of this section.
(v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not
be inside another device during testing for compliance with part 15 requirements. Unless the
transmitter module will be battery powered, it must comply with the AC line conducted requirements
found in §15.207. AC or DC power lines and data input/output lines connected to the module must
not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of
these lines shall be the length typical of actual use or, if that length is unknown, at least 10
centimeters to insure that there is no coupling between the case of the module and supporting
equipment. Any accessories, peripherals, or support equipment connected to the module during
testing shall be unmodified and commercially available (see §15.31(i)).
(vi) The modular transmitter must be equipped with either a permanently affixed label or must be
capable of electronically displaying its FCC identification number.
(vii) The modular transmitter must comply with any specific rules or operating requirements that
ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions
along with the module to explain any such requirements. A copy of these instructions must be
included in the application for equipment authorization.
(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final
configuration.
X
X
X
X
X
X
X
* Shall provide a detailed explanation if the answer is “No”.
Sincerely,
__________________________
By:
Title:
Company: IMET s.r.l.
Telephone: +39 0434 787811
e-mail: simone.dario@imet.eu
Mr. Simone Dario
Compliance Manager
FCB013_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2021-08-09 | 2404 ~ 2479 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2021-08-09
|
||||
| 1 | Applicant's complete, legal business name |
IMET s.r.l.
|
||||
| 1 | FCC Registration Number (FRN) |
0030455414
|
||||
| 1 | Physical Address |
Via Ronche, 93
|
||||
| 1 |
Sacile, N/A
|
|||||
| 1 |
Italy
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
a******@dekra.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
2AYRT
|
||||
| 1 | Equipment Product Code |
B033
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
E****** C****
|
||||
| 1 | Title |
President
|
||||
| 1 | Telephone Number |
+3904********
|
||||
| 1 | Fax Number |
+39 0********
|
||||
| 1 |
s******@imet.eu
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2.4GHz RF Transceiver Module | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Single Modular Approval | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output power is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
CMC Centro Misure Compatibita Srl
|
||||
| 1 | Name |
R****** B******
|
||||
| 1 | Telephone Number |
+39 0********
|
||||
| 1 | Fax Number |
+39 0********
|
||||
| 1 |
r******@cmclab.it
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2404.00000000 | 2479.00000000 | 0.0071800 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC