FCC ID: 2AYD5-I22M01 POS Device

Swift 1 Series User Manual The device comes in 3 options below Swift 1 Swift 1s Swift 1p Optional accessories Swift 1 Scanner Swift 1 Printer Swift 1 Strap Introduct ion Power Button Volume Button Display 6.517"

Type-C Interface Card Slot Pogo Pin Camera Speaker NFC

(optional) Power Button Press the power button to power on. Under power on conditions, press and hold the button for 2-3 seconds to select power off or reboot. In the standby status, press the control button for 8 sec. to power off. Type-C Interface With the charging function, for external devices, such as U disk. Pogo Pin Used to connect Print Module (optional) or Scan Code Module (optional). Display A touch screen for the operator. Camera To scan the QR code and shoot. Combination Swift 1s

Swift 1 Scanner Swift 1 Swift 1p Swift 1 Strap

(optional, default none) Swift 1s (front) Swift 1s (back)

Swift 1 Printer Swift 1 Swift 1p Technical Specif ications OS CPU Screen Storage Camera NFC Wi-Fi Bluetooth Printer Scanner Speaker Android 11 8-Core, 8 x A55, 1.6GHz 6.517 inches, resolution: 720 x 1600 Multi-touch capacitive screen 2GB RAM (optional 4GB) + 16GB ROM (optional 32GB / 64GB) 0.3 MP rear camera, 5 MP front camera Optional, default none 802.11 a/b/g/n/ac (2.4GHz/5GHz) 5.0BLE 58mm thermal printer, support the paper roll with maximum 40mm diameter Zebra SE4107LU 0.8W External Interface 1 x USB Type-C port, 1 x Card slot TF Card Network GPS Battery 1 x Nano SIM + 1 x TF card 2G/3G/4G AGPS, GLONASS, GPS, Beidou, Galileo 7.6V 2550mAh Power Adapter 5V/2A Operating Temperature 0 to +50 Storage Temperature

-20 to +60 Operating Humidity 10% to 90% r.H. Limit Altitude Max. 5000 meters Safety Information Safety and Handling Please plug-in power adapter to only its corresponding AC socket. Do not use in explosive gas atmosphere. Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorised service provider. This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices. About the battery replacement:

1. Do not attempt to replace the battery yourself - you may damage the battery, which could cause overheating, f ire and injury. 2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in f ire. It should be serviced or recycled by iMin or an authorised service provider, and must be recycled or disposed of separately from household waste. Company Statement Our company is not responsible for the following actions:

Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specif ied in this instruction manual. We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products. The operating system of this product is supported by off icial regular OS update. If the user breached the third party's ROM system or change the system f ile by hacking, it may cause unstable, undesired system operation and bring security risk. Advices Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog. Do not use the device in extreme cold or hot environments eg, near a f ire or lit cigarette. Do not topple, throw, or bend. Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device. Do not at tempt to use the device near medical equipment. Important Safety Information Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit. If you f ind unusual odour, overheating or smoke, please cut off the power immediately. Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere. Disclaimer Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specif icat ion without prior not ice. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information:

This POS Device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: POS Device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the POS Device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0 mm separation distance between the user's body and the back of the POS Device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

LABEL AND LOCATION

(Size: L4.0cm x 3.0cm) Label Location _____________________________________________________________________________________________________

Imin Technology Pte Ltd Agent Authorization Company: Imin Technology Pte Ltd Address: 11 Bishan Street 21, #03-05 Bosch Building, Singapore 573943 Product Name: POS Device Trade Mark:

Model Number(s): I22M01 FCC ID: 2AYD5-I22M01 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-09-09 Name:

Aaron Zhong Title:

Director Company:

Imin Technology Pte Ltd

Imin Technology Pte Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-09-05 Subject; Request for Confidentiality FCC ID: 2AYD5-I22M01 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name / Title: Aaron Zhong / Director Company: Imin Technology Pte Ltd Address: 11 Bishan Street 21, #03-05 Bosch Building, Singapore 573943 Phone: 67413019 Fax: 67413989 E-Mail: aaron.zhong@imin.sg

Imin Technology Pte Ltd Responsibility Declaration Letter Company name: Imin Technology Pte Ltd Address: 11 Bishan Street 21, #03-05 Bosch Building,Singapore 573943 Product Name: POS Device FCC ID: 2AYD5-I22M01 Model(s): I22M01 Model(s) Difference Description:N/A We, [Imin Technology Pte Ltd], hereby acknowledge that all the product information

(including all original, drafted, or modified documents) provided to the TCB either by us or our agent or representative(s) for the purposes of FCC certification will meet FCC regulations and requirements; and that any modifications or changes made as a result of TCB review of the documents will be formally implemented into the manufacturing process and product documentation shipped with equipment. We also confirm that all information provided is legitimate and does not contain any false content such as forgery, fabrication, alteration, tampering and concealment. We assume all economic and legal responsibilities in matters that may arise as a result of disclosure on sample products and associated product documentation provided for product certification that may subsequently be found to be a mis-representation of the final product and accompanying documentation when produced, marketed, or sold in the United States, Canada, or anywhere in the world. Sincerely, Signature:

Name / Title: Aaron Zhong / Director Company: Imin Technology Pte Ltd Address: 11 Bishan Street 21, #03-05 Bosch Building, Singapore 573943 Phone: 67413019 Fax: 67413989 E-Mail: aaron.zhong@imin.sg Responsibility Declaration Letter v1.0

Imin Technology Pte Ltd FCC Software Configuration Control Declaration Date: August 30, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: POS Device / I22M01 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Aimin Hu Title: Director Signature of applicant Date: 2022/09/05 FCC Software Configuration Control Declaration Rev1.1