FCC ID: 2AYD5-I23M03 POS Device

Swift 1 Pro Series Model: I23M03 User Manual The device comes in 3 options below Swift 1 Pro Swift 1s Pro Swift 1p Pro Optional accessories Swift 1 Scanner Swift 1 Printer Swift 1 Strap Introduct ion Power Button Volume Button Display 6.517"

Pogo Pin Camera Speaker Type-C Interface Card Slot NFC

(optional) Pogo Pin (charge) Power Button Press the power button to power on. Under power on conditions, press and hold the button for 2-3 seconds to select power off or reboot. In the standby status, press the control button for 8 sec. to power off. Type-C Interface With the charging function, for external devices, such as U disk. Pogo Pin Used to connect Print Module (optional) or Scan Code Module (optional). Display A touch screen for the operator. Camera To scan the QR code and shoot. Combination Swift 1s Pro

Swift 1 Scanner Swift 1 Pro Swift 1p Pro Swift 1 Strap

(optional, default none) Swift 1s Pro

(front) Swift 1s Pro

(back)

Swift 1 Printer Swift 1 Pro Swift 1p Pro Technical Specif ications OS CPU Screen Storage Camera NFC Wi-Fi Bluetooth Printer Scanner Speaker Android 13 Octa-Core (Quad-core Cortex-A73 2.0GHz + Quad-core Cortex-A53 2.0GHz ) 6.517 inches, resolution: 720 x 1600 Multi-touch capacitive screen 4GB RAM + 32GB ROM 0.3 MP rear camera, 5 MP front camera Optional, default none 802.11 a/b/g/n/ac (2.4GHz/5GHz) 5.0BLE 58mm thermal printer, support the paper roll with maximum 40mm diameter Zebra or Totinfo 0.8W External Interface 1 x USB Type-C port, 1 x Card slot TF Card Network GPS Battery 1 x Nano SIM + 1 x TF card 2G/3G/4G AGPS, GLONASS, GPS, Beidou, Galileo 7.6V 2500mAh Power Adapter 5V/2A Operating Temperature Storage Temperature

-10 to +50

-20 to +60 Operating Humidity 10% to 95% r.H. Limit Altitude Max. 2000 meters Safety Information Safety and Handling Please plug-in power adapter to only its corresponding AC socket. Do not use in explosive gas atmosphere. Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorised service provider. This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices. About the battery replacement:

1. Do not attempt to replace the battery yourself - you may damage the battery, which could cause overheating, f ire and injury. 2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in f ire. It should be serviced or recycled by iMin or an authorised service provider, and must be recycled or disposed of separately from household waste. Company Statement Our company is not responsible for the following actions:

Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specif ied in this instruction manual. We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products. The operating system of this product is supported by off icial regular OS update. If the user breached the third party's ROM system or change the system f ile by hacking, it may cause unstable, undesired system operation and bring security risk. Advices Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog. Do not use the device in extreme cold or hot environments eg, near a f ire or lit cigarette. Do not topple, throw, or bend. Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device. Do not at tempt to use the device near medical equipment Important Safety Information Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit. If you f ind unusual odour, overheating or smoke, please cut off the power immediately. Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere. Disclaimer Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specif icat ion without prior not ice. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

(2) undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause Consult the dealer or an experienced radio/TV technician for help. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The SAR limit adopted by USA is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the Federal Communications Commission (FCC) for this device type when it is tested for the properly worn on the body is under 1g 1.6W/Kg. The device complies with the RF specifications when the device is used near youre at a distance of 10 mm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 10 mm away from your body to meet the requirement earlier mentioned. This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10 mm must be maintained between the users body and the product, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn Label Label Location 1. Page 1 of 1

Imin Technology Pte Ltd Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024.3.13 SUBJECT: FCC Application for FCC ID: 2AYD5-I23M03 To Whom It May Concern:

We, the undersigned, hereby authorize _ Titto Zhao _ at _CTC Laboratories, Inc. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by _ Titto Zhao _ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature:

Name: Aaron Zhong Phone: 67413019 Fax: 67413989 E-Mail: aaron.zhong@imin.sg

\\192.168.1.200\sz-ctc\09_\RF \2024 \1 \CTC240105-010 I23M03 RED & FCC ID\1.\1.3

\Letter\POA_Letter_140225.docx

Imin Technology Pte Ltd Date: 2024.03.13 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:_2AYD5-I23M03 ____ Product Name:__ POS Device _______ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block Diagram Operational Description Parts Placement These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure for an initial period of days External Photos Internal Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. Parts List Tune-Up Info PCB Layout Test Setup Photos Users Manual not applicable until:

Signature:

Name: Aaron Zhong Phone: 67413019 Imin Technology Pte Ltd Fax: 67413989 E-Mail: aaron.zhong@imin.sg

Imin Technology Pte Ltd Date: 2024.03.13 FCC ID: 2AYD5-I23M03 Dear Sir/Madam, We, Imin Technology Pte Ltd Hereby declares the Product name: POS Device, Model no.:

I23M03, Have done SDOC certification. Sincerely, Signature:

Name: Aaron Zhong Phone: 67413019 Fax: 67413989 E-Mail: aaron.zhong@imin.sg

Imin Technology Pte Ltd Covered Equipment Certification Attestation Letter 3/13/2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AYD5-I23M03 Imin Technology Pte Ltd (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Imin Technology Pte Ltd (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signature:

Name: Aaron Zhong Phone: 67413019 Fax: 67413989 E-Mail: aaron.zhong@imin.sg

Imin Technology Pte Ltd U.S. Agent Designation for Service of Process -

Certification Attestation Letter March 25, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AYD5-I23M03 Per section 2.911(d)(7) of the FCC rules, Imin Technology Pte Ltd (the applicant) , FRN:

0030267330 certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process:

Company Name:

Physical U.S. Company Address:

Agent name:

Agent Email Address:

FRN:

The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

EMCTEK 11788 Big Canyon Ln, San Diego, CA 92131 USA Fang Liu emctek.us@gmail.com 0033401829 Designated Agent Signed:

(Required, if different to Applicant):

Signed:

Aaron Zhong Director Imin Technology Pte Ltd Printed name:

Title:

Company Name:

Date:

FRN Code:

* the applicant must designate a contact located in the United States for purposes of acting as the March 12, 2024 0033401829 March 12, 2024 0030267330 Fang Liu

EMCTEK Signed:

Printed name:

Title:

Company Name:

Date:

FRN Code:

applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.