Thank you for purchasing Blink !
You can install Blink in three easy steps:
1. Download the Blink Home Monitor App 2. Connect your Sync Module 3. Add your Camera(s) Please check support.blinkforhome.com for our full setup guide. Step 1: Head to the App Store or Google Play Store to Download the Blink App. Step 2: Gather the items from the Sync Module box and launch the Blink app. You will start setup by plugging in the Sync Module. After setting up your account you will (A) connect your phone via WiFi to your Sync Module and then
(B) use your phone to connect your Sync Module to your WiFi network. Please carefully follow the on screen instructions. Step 3: After connecting the Sync Module, you will be directed to add a camera. Remove your camera and batteries from the box and follow the Blink app instructions to proceed. A B Technical Support In the event that you encounter issues with system set-up or functionality, there are a few ways to reach us:
1. Visit support.blinkforhome.com for system instruc-
tions, troubleshooting information, and links to contact us directly for support. This is also available from the curtain menu in the Apps main screen by selecting Visit Blink Knowledge Base. 2. Directly through the Blink Home Monitor App - select Contact Customer Service from the curtain menu located in the upper left-hand corner of the Apps main screen. BATTERY WARNING STATEMENT:
-Keep batteries out of the reach of children
-Insert the batteries in the proper direction as indicated by positive (+) and negative (-) markings in battery compartment.
-It is highly recommended to use Lithium batteries with this product. Do not mix old and new batteries or batteries of different types (for example, Lithium and alkaline batteries).
-Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations.
-If a battery leaks, remove all batteries and recycle or dispose of them in accordance with battery manufacturers recommendations for cleanup. Clean battery compartment with a damp paper towel or follow battery manufacturers recommendations. If fluid from the battery comes into contact with skin or clothes, flush with water immediately. PRODUCT DISPOSAL INFORMATION Dispose of the product in accordance with Local and National Disposal Regulations. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Responsible party: Immedia, 100 Burtt Rd, Suite 100, Andover MA 01810, tel 718-915-1920 INDUSTRY CANADA STATEMENT Complies with the Canadian ICES-003 Class B specications. Cet appareil numrique de la class B est conforme la norme NMB-003 du Canada. Lutilisation de ce dispositif est autorise seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Important Product Information Before using your Blink System please read the privacy policy located at www.blinkforhome.com/privacy. Please also read all rules and policies for Blink and Blink related services and websites at www.blinkforhome.com/terms. Please also read the Blink End User License Agreement at www.blinkforhome.com/EULA. The aforementioned terms, rules, notices, policies and provisions are collectively the Agreements. By using Blink you agree to be bound by the terms of the Agreements. Your Blink system is covered by a One-Year Limited Warranty. Details are available at www.blinkforhome.com/warranty. Copyright Immedia Semiconductor 2015.