FCC ID: 2AF77-H2261820 Wired Floodlight Camera

DRAFT Superior Install Instructions (illustrations are outstanding) 2022-08-25

[SAFETY TRIANGLE] WARNING: Risk of electrical shock. Disconnect power to the installation area at the fuse box or circuit breaker before beginning installation. Always use caution when handling electrical wiring. Verify that the supply voltage is correct. Connect fixture to a 100VAC-240VAC 50/60Hz power source. Properly ground fixture. DO NOT INSTALL if a working earth ground connection is not available. Always follow local electrical code standards when installing wired connections. CAUTION: Risk of fire. Do not install near combustible or flammable surfaces. NOTICE: Do not connect this light fixture to a dimmer-switch or timer. Blink Wired Floodlight Camera must be mounted to a 4 round UL-listed weatherproof electrical box. If you dont have an existing electrical box, or are unsure how to install one in compliance with your local building electrical codes, it is recommended that you hire a licensed electrician for assistance. Blink Wired Floodlight Camera must be installed on a wall or eave. Check to see that all contents within the box are present. If you notice anything is missing, do not attempt to install the Floodlight Camera. In-Box Content

(1) Wired Floodlight Camera

(1) Metal mounting bracket

(1) S-hook

(3) Wire nuts

(1) Silicone plug Screws In order to complete installation of your Blink Wired Floodlight Camera, you will need an outdoor silicone sealant, which is not included with this product. Ensure you have an outdoor silicone sealant available before beginning installation. These instructions assume youre replacing an existing floodlight mounted to an outdoor electrical box with the Blink Floodlight Camera. These instructions are for informational purposes only. Working with electricity can be dangerous unless proper safety precautions are taken. If you are not comfortable or are inexperienced with the processes and tools described in this manual, consult a licensed electrician. 1. Before you continue, turn off power at the breaker. This step is essential to keeping you and your new Blink product safe. a. <illustration>

b. If youre not sure which breaker to turn off, turn off the master breaker for your home, or contact a licensed electrician. 2. Choose an existing floodlight to replace with the Blink Floodlight Camera. DRAFT Superior Install Instructions (illustrations are outstanding) 2022-08-25 a. <illustration>

b. For the best motion detection, the Wired Floodlight Camera should be installed around 9 feet (2.7 meters) above the ground. 3. Get ready for installation. Unpack the screws, metal mounting bracket, and the S-hook. Unpack the floodlight camera. Thats all youll need for now. a. <illustration>

4. Remove your existing floodlight and mounting bracket. Uninstall according to the manufacturers instructions. Be sure to remove any wires, wire nuts, screws, and hardware that came with the device. a. <illustration>

5. Using a handheld screwdriver, install the metal mounting bracket. Make sure the side marked Front is facing you. Screw it down across two opposing holes on your electrical box. Ensure the metal mounting bracket is secure to the electrical box before moving to the next step. a. The A screws are likely to fit, but if they dont, try the B screws, then the C screws, and so on. b. <illustration>

6. Inspect the wires in your electrical box. You should see one black wire (for live), one white (for neutral), and one bare metal or green (for ground). a. <illustration>

WARNING: If you cant easily identify the wires coming out of your electrical box, have difficulty or are uncomfortable in any way connecting them, consult a licensed electrician. 7. Connect the wires from your box to your floodlight camera. a. Use the provided S-hook to hang the floodlight camera using the center light heads arm as shown on the picture. b. You will be connecting your bare metal or green ground wire to green, white to white, and black to black. Take one pair of color-coded wires, strip off 3/4" of the outer insulation, twist the bare wire together, and screw your wire nut on clockwise. Repeat for the two remaining pairs of wires until all three pairs are securely fastened together. c. <illustration>

8. Align the light fixture to the electrical box. a. Tuck the power wires into the electrical box, then lift the floodlight and remove the metal S-hook. Line up the center hole with the threaded post from mounting bracket and slide the fixture onto the post. Use a Phillips-head screw driver to install the threaded nut marked I onto the post. Insert the silicone plug (H) into the screw hole. Use appropriate outdoor silicone sealant

(not included) to seal around the outside of the floodlight between the canopy and the house. b. c. <illustration>

9. Adjust the light heads and camera into the desired position. a. <illustration>

10. Restore power at the breaker. a. It may take a moment for your floodlight camera to power on. It will be ready when the green light is illuminated and the blue light is blinking slowly. b. <illustration>

11. Download or open the Blink Home Monitor App. In the top right corner, select (+) Add Devices, then select Wired Floodlight Camera. When prompted, scan the QR code on the top right cover of this guide to access your device serial number. DRAFT Superior Install Instructions (illustrations are outstanding) 2022-08-25 12. Follow the in-app instructions to complete setup.

DRAFT Superior Warranty Safety Leaflet 2022-08-25 Getting started with Blink is easy!

IMPORTANT PRODUCT INFORMATION

[CAUTION TRIANGLE] SAFETY INFORMATION Use Responsibly. Read all instructions and safety information before use. FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. Working with electricity can be dangerous unless proper safety precautions are taken. If you are not comfortable or are inexperienced with the processes and tools described in this manual, we recommend that you hire a licensed electrician. Installation by a qualified electrician may be required in your area. Refer to your local laws and building codes before performing electrical work; permits plus professional installation may be required by law. WARNING: Electrical shock hazard Disconnect power to installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring. Additionally:

Turn off power at the fuse box before installing. Verify that the supply voltage is correct. Connect fixture to a 110 VAC 60 Hz power source. Only install the Blink Floodlight Camera on a 4round, UL listed weatherproof electrical outlet box. The earth wire must be connected to the light fixture. DO NOT INSTALL if a working earth connection is not available. Do not connect this light fixture to a dimmer switch or timer. Only use the provided screws and accessories to install your Blink Floodlight Camera. Do not install on circuits feeding motor loads such as kitchen appliances, HVAC equipment, washer/ dryer or garage door openers. Do not install when it is raining. Do not install while others are standing below the electrical outlet box. Your device does not contain serviceable parts. Do not disassemble. If you are in any doubt with the installation instructions, consult a qualified electrician. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm. CAUTION: Risk of fire Do not install near combustible or flammable surfaces. CAUTION: To reduce the risk of falling, take extra caution when using a ladder or similar equipment to mount the product. DRAFT Superior Warranty Safety Leaflet 2022-08-25 For setup, mounting and hardwire installation instructions, go to blinkforhome.com/setup or scan the QR code above. Maintaining Your Blink Floodlight Camera WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Dont expose your device to steam, extreme heat or cold. For example, do not install your device near any heat sources such as space heaters, heater vents, radiators, stoves, or other things that produce heat. Use your device in a location where temperatures remain within the devices operating temperature range set forth in this guide. Your device may get warm during normal use. To reduce the effect of the warming, place your device on a heat resistant surface. Your device can withstand outdoor use and contact with water under certain conditions. However, your device is not intended for underwater use and may experience temporary effects from exposure to water. Do not intentionally immerse your device in water. Do not spill any food, oil, lotion, or other abrasive substances on your device. Do not expose your device to pressurized water, high velocity water, or extremely humid conditions (such as a steam room). To protect against electric shock, do not place cord, plug, or device in water or other liquids. Following periods of extended use, the Blink Floodlight Camera may feel hot to touch. Please wait 15 minutes after the Blink Floodlight Camera is no longer in use before touching or moving it. Do not stare directly at the LEDs for more than a few seconds to avoid eye injury. Use only Blink branded accessories compatible with this product. PRODUCT SPECIFICATIONS Device Name: Blink Floodlight Camera Model Number: BFM00100U, BFM00100UW Electrical Rating: 100-240VAC, 45W, 50/60Hz Operating Temperature: -4F to 122F (-20C to 50C) Suppliers Declaration of Conformity Compliance Information Statement Device Name: Blink Floodlight Camera Model Number: BFM00100U, BFM00100UW This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party and Party issuing Suppliers Declaration of Conformity:

Amazon.com Services LLC, 410 Terry Avenue North, Seattle, WA 98109, U.S.A. blinkforhome.com/pages/certifications DRAFT Superior Warranty Safety Leaflet 2022-08-25 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Products FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid. This device complies with radio frequency radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other product antenna or transmitter. Innovation, Science and Economic Development Canada (ISED) Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Information Regarding Exposure to Radio Frequency Energy This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport. Additional Safety & Compliance Information For additional safety, compliance, recycling and other important information regarding your device, DRAFT Superior Warranty Safety Leaflet 2022-08-25 please refer to the Legal and Compliance section of the About Blink menu in the Settings in your app or https://blinkforhome.com/safety-and-compliance. BLINK TERMS & POLICIES Terms of Service and Warranty By purchasing or using the product, you agree to the Terms of Service found at https://blinkforhome.com/blink-terms-warranties-and-notices. For information on our warranty and any other applicable policy, visit https://blinkforhome.com/blink-terms-warranties-and-notices. Amazon.com Services LLC, 410 Terry Avenue North, Seattle, WA 98109, U.S.A. 2022 Amazon.com, Inc. or its affiliates. Amazon, Blink, and all related marks are trademarks of Amazon.com, Inc. or its affiliates.

Immedia Semiconductor LLC 100 Riverpark Drive Suite 125, North Reading, MA, United States 01864 Tel: 9788450360 ; Fax: 2066538348 Date: November 15, 2022 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AF77-H2261820 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, J. Spb P. Douglas Grearson grearson@amazon.com

Immedia Semiconductor LLC 100 Riverpark Drive Suite 125, North Reading, MA, United States 01864 Tel: 9788450360 ; Fax: 2066538348 Date: November 15, 2022 To whom it may concern, Please be notified that |, P. Douglas Grearson, have designated Sporton International Inc. as the agent being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Sporton International Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is limited to the product of as following:

FCC ID: 2AF77-H2261820 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Sincerely yours, Oba -

P. Douglas Grearson grearson@amazon.com