FCC ID: 2AQ5DPZM0003 PAZ PYRA 10W Wireless Charging Stand

PZMOO0O3BK PYRA INSTALLATION FCC ID: 2AQ5DPZM0003 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 15 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Connect the charging stand with the wall charger; The LED light will flash twice as indication that it is ready to charge. Place your smart phone vertically on the stand, the LED light will be in breathing mode during charging. Avoid placing metal objects on the charging stand. SR = nose AS (150gsms sh At

FCC, Request for non-disclosure Date: 19-Oct-10 RF_501, Issue 7 Page 1 of 1 Company Name: Imprint Co., Ltd. Address: 13F-1, No. 2, Jian 8th Rd., Zhonghe Dist., City: New Taipei City Country: Taiwan To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AQ5DPZM0003 Reference number: ##4#H#H#

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material ] Block Diagrams Operational Description [x] Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos JUStIFICALION: cc cccccceseccececeeseevessvsesssrstsusssesvsessrasuesisesenseseisseseseetececisessssestuseestnseeeseeeee Planned Release Date STC: (notes 2, 3,4, 5). If no date is given, 45 days from grant date will be used. Date: 2019/10/03 Name and signature of applicant: Kevin Chiang Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Cover Leter- Wireless Charger Approval Date: 2019/10/26 To whom it may concern:

We have declared below featured for FCC equipment authorization as an Inductive wireless power transfer applications approval ( KDB 680106 D01v03 section 5,b). Device FCC ID: 2AQ5DPZM0003 Requirements

(1) Power transfer frequency is less than 1 MHz.

(2) Output power from each primary coil is less than or equal to 15 watts.

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils.

(4) Client device is placed directly in contact with the transmitter.

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Result Pass,TheDeviceoperatesatafrequency rangeis110KHz~205KHz Pass,Theprimarycoilis10watts Yes,onlysinglePrimarycoil Pass,Clientdeviceisplaceddirectlyin contactwiththetransmitter. Pass,Mobileexposureconditionsonly Pass,Hfieldstrengthsat15cmsurrounding thedeviceand20cmabovethetop surfacefromallsimultaneoustransmitting coilsaredemonstratedtobelessthan50%

oftheMPElimit. Dated this 2019/10/26 By:

Signature Title: Project manager Kevin Chiang Printed On behalf of :

Imprint Co., Ltd.

Declaration of Authorization We Name: Imprint Co., Ltd. Address: 13F-1, No. 2, Jian 8th Rd., Zhonghe Dist., City: New Taipei City Country: Taiwan Declare that:

Name Representative of agent: Chenz Ker Agent Company name: MRT Technology (Taiwan) Co., Ltd Address: No. 38, Fuxing Second Rd., Guishan Dist., City: Taoyuan Country Taiwan is authorized to apply for Certification of the following product(s):

Product description: PAZ PYRA 10W Wireless Charging Stand FCC ID: 2AQS5DPZM0003 Type designation:

Trademark:

PZMO0003 PAZ Validity/ expiry date 2020/1/30 on our behalf. Date:

City:

Name:

Function:

Signature:

Notes:

2019/10/03 New Taipei City Kevin Chiang Project manager

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authonzed agent. RF_160, Issue 04