Model: unplug -100 User Guide General Specifications Bluetooth v2.1 includes profiles:A2DP,AVRCP,HFP,HSP Advanced Audio Distribution Profile(A2DP)for wireless music streaming Audio Video Remote Control Profile(AVRCP)for wireless audio and video playback control Hands-free Audio(HFP)and Headset Profiles(HSP)for hands-free calling capability with echo and noise cancellation technology Range up to 33FT(10M)
", the Westinghouse logo the RoHS logo, the product and packaging are Westinghouse
tradenarks or registered trademarks of Westinghouse Digifal LLC. or its subsidiaries in the United States or other countries. Mobile Phone, RIM, Research in Motion, SureType and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. MacBook,iPad, iPhone, iPod and iChat are trademarks of Apple Inc., registered in the U.S. and other countries, The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Westinghouse Digital LLC is under license. Other trademarks and trade names are those of their respective owners. Skype is a trademark of Skype Limited. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Trouble Shooting Sound is very low or no sound Music is playing on a device but isn't transferring to unplug-100 Music Speaker Bluetooth Please check unplug-100 Music Bluetooth Speaker or Bluetooth device Volume Level If using 3.5mm port, be sure the mini jack cable is securely inserted into Speaker and your device unplug-100 Music Bluetooth Make sure your Bluetooth device has A2DP(check your device's owner's manual) Be sure the device is paired If using 3.5mm port, be sure the mini jack cable is securely inserted into Bluetooth Speaker and you device unplug-100 Music Micro 16 1 2
harmful interference in a residential installation. his equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance withthe instructions, may cause harmfu
What's Included:
unplug-100 Music Bluetooth Speaker Travel Pouch(Option) USB Charging Cable USB Power Adaptor 3.5mm Headphone Mini Jack Cable Trouble Shooting LED light not ON Hands-free calling is not working with iPod or mobile phone 17 Make sure unplug-100 Music Bluetooth Speaker main switch is ON Make sure unplug-100 Music Bluetooth Speaker is charged Make sure your mobile device has HSP/HFP Be sure your mobile phone is paired Check volume on unplug-100 Music Bluetooth Speaker Features and Benefits Bluetooth 2.1 with Westinghouse audio digital signal processing Technology for clean, best-in-class wireless stereo sound reproduction Built-in mic with advanced noise-cancellation enables clear wireless hands-free calling and conferencing Two 40mm full range drivers deliver superb music fidelity Ultra Bass Booster Passive Radiator Subwoofer Convenient charging with included mini USB charging cable Rechargeable Lithium lon battery for up to 6 hours of playtime Connects to iPod or any device with a 3.5mm headphone port using a mini jack cable Auto-search and auto-reconnect with compatible device
Controlling Volume When Connected via 3.5mm AUX Input:
NOTE: Volume cannot be controlled with the volume control on unplug-100 Music Bluetooth Speaker when connected via the 3.5mm "AUDIO IN" input. Use the volume control on you device as you normally would. Recharging Battery Make sure the power switch is set to "ON". Plug the Mini USB end of the included USB cable into USB mini port, Marked
"USB " on the back of unplug-100 Music Bluetooth Speaker. Plug the other end into a USB port on your computer or Power adaptor. Charge time is 4hrs from an empty battery. NOTE: Always be sure to switch unplug-100 Music Bluetooth Speaker to the "OFF" position when not in to use to save battery charge. 15 Volume control : Push the(+) to increase volume and the (-) button to decrease volume. NOTE : When connected to a Mobile Phone, if you push the , the first track in your music library will begin to play. This function is disabled during an incoming call. Connecting to a Device via 3.5mm AUX IN Input You can use unplug-100 Music Bluetooth Speaker for music playback with and device that has 3.5mm headphone port. You will need a 3.5mm to 3.5mm mini jack cable. Simply plug one end of the cable into your device, as you would to a pair of headphones. Plug the other end of the cable into the 3.5mm port marked "AUX" on the back of unplug-100 Music Bluetooth Speaker. Play music.
Hands-free Calling Answer/End Button Play/Pause/Pairing Volume Up Volume Down LED Indicator 3.5mm Audio In Port Main Power Switch Mini USB Charging Input Compatibility Wireless: Devices with Bluetooth 2.0 or above(See General Specifications for profiles), Bluetooth equipped PCs and most Bluetooth equipped smartphones or computers. Wired: Devices with a standard 3.5mm headphone output port via 3.5mm mini jack cable. WARNING 1. Do not leave the product exposed to a heat source or high temperatures. 2. Do not remove or attempt to remove the non-user-replaceable battery. When disposing of the product,take it to a waste electronics service. Controlling iPod or Bluetooth PC or music phone's music Playback on unplug-100 Bluetooth speaker In Addition to using the playback control on your iPod or Bluetooth equipped PC or music phone as you normally would, you can control music playback from unplug-100 Music Bluetooth Speaker using the touch buttons. NOTE : Your device must support AVRCP (Audio Video Remote Control Profile) to control your device's from unplug-100 Music Blutooth Speaker. Please check your device's owner's manual. At this time, Apple devices equipped with Bluetooth, like iPhone, iPad and Macs, do not support AVRCP. Play/Pause: Push and release the button to play/pause. 14 3 4 13 unplug-100 Taking Calls on a Mobile Phone Connected to unplug-100 Music Bluetooth Speaker When you receive an incoming call, ring tone will sound from Music Bluetooth Speaker. If you are listening to music through your Mobile Phone the music will automatically pause. To accept a call: You can accept a call as you usually do, using your Mobile Phone controls or touch the on the top of unplug-100 Music Bluetooth Speaker. Speak normally. Your call will come through the speakers and you voice picked up through the built-in mic. To end a call: Use you Mobile Phone controls or press the button. To reject a call: Use your mobile Phone controls or press and hold the button. To use call waiting: Use you Mobile Phone controls or press and release the button twice in succession to put the first call on hold and answer the incoming call. Repeat to switch back to the first call. LED Indicator There is an LED light in the middle of the front Bluetooth Speaker. Below are what the LED's various displays indicate. LED off - Power OFF BLUE - Power ON Flashing BLUE/RED - Pairing mode Quick Flshing Red with Tone Sound - Low Battery Level Flashing RED - When Charging Flashing BLUE - Device Paired Set-UP and Pairing via Bluetooth For Music Playback and Hands-free Calling NOTE: unplug-100 Music Bluetooth Speaker can pair with most Bluetooth 2.0 devices. Pairing may vary by device. Consult your Bluetooth device's manual for pairing instructions. 12 5 Pairing with Bluetooth devices Pairing occurs when two Bludtooth devices communicate with each other and establish a connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the unplug-100 speaker, you should not have to pair it again. The unplug-100 speaker can pair with up to six Bluetooth devices. However, it can only connect to, and play audio from one device at a time. To begin pairing with a Bluetooth device 1. With the Bluetooth device and the unplug-100 speaker both turned on, Touch and hold the button (Fig.1) on the speaker for four seconds to make the speaker discoverable. The LED indicator on the unplug-100 speaker LED indicator Flashing Red and Blue. approximately once every second to show that the speaker is discoverable. 6
(Fig.1) 5. Windows 7 will guide you through set-up. If Prompted, the Passcode is 0000. 6. Be sure your PC's audio output and mic input are set to unplug-100 Music then clickContinue. Your PC is now ready to use unplug-100 Music Bluetooth Speaker to play music and for hands-free online chat. If you have a Bluetooth equipped Mac, please consult your owner's manual for pairing instructions. NOTE: Some audio delay may occur when watching video playback, causing audio on video to beout of sync when connected via Bluetooth. Use a 3.5mm minijack cable for optimal performance with video playback. See section Connecting to device via 3.5mm"AUX"input. NOTE: Always be sure to switch unplug-100 Music Bluetooth Speaker to the OFF position when not in use to save battery charge. 11 unplug-100 Music Bluetooth Speaker. Your PC may need additional NOTE: Not all PCs support all Bluetooth profiles needed for full functionality with Bluetooth drivers or profiles installed. Please consult your owner's manual. If your PC does not support needed Bluetooth profiles, you can connect with a 3.5mm to 3.5mm minijack cable and listen to music through unplug-100 Music Bluetooth Speaker. See section Connecting to a device via 3.5mm
"AUX IN" input. 1. Put unplug-100 Music Bluetooth Speaker into pairing mode. 2. On you PC, click "Start" then click "Control Panel". 3. Under"Hardware and Sound" click "Add a device". 4.The Add a Device Wizard will pop up. You should see an icon for
"unplug-100 " Click on if and then click "Next".
speaker , unplug-100 2. Set your Bluetooth device to discover the then locate the Bluetooth Device list. 3. From the Bluetooth device list ,select the device named "unplug-100". 4. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some devices Also ask you to accept the connection. Your Bluetooth device indicates when pairing is complete. The unplug-100 speaker indicates pairing is complete when the LED indicator turn flashing Blue with tone sound. To connect a device To connect a previously paired device ,press the Bluetooth button on the unplug-100 speaker . The Bluetooth indicator on the speaker flashes on and off approximately twice every second until the device connects. Then the indicator stops flashing and remains steadily on when the speaker and device have successfully connected. 10 7 m m 0
. 0 7 To pair additional devices With the Bluetooth device and the unplug-100 speaker both turned on , press the button on the speaker for four seconds to make the speaker discoverable again . Then follow steps 2-4 on page 7. The unplug-100 memory can hold up to six paired devices. You can pair more than six devices, but the memory will never contain more than six. When the memory is full with six devices and an additional device is paired, the least recently used is deleted from memory and replaced the newly paired device. Clearing memory To clear the unplug-100 Speaker memory of all devices, touch and hold both-Vol.Up and Vol.Down (fig.2) button on the speaker (about 5 seconds) until LED indicator flashing Red and Blue to Pairing mode(start Pairing for new device ). 8
(fig.2) The unplug-100 speaker clears all Bluetooth devices from its memory and then becomes discoverable. Reconnection in Event of Bluetooth Disconnection If by any reason your device and unplug-100 Music Bluetooth Speaker are disconnected, such as out connection distance or powering off, they can be re-connected by:
Select "unplug-100 " from your device for reconnection. NOTE : After pairing, unplug-100 Music Speaker will also "auto-connect"
with compatible devices that auto-search and re-connect with the last connecting device if disconnection should occur. Pairing with Bluetooth Equipped PC(Windows 7) You can pair unplug-100 Music Bluetooth Speaker with most Bluetooth equipped PCs to music or for use as a speaker phone with Skype and other online video/voice chat clients. 9 103x70mm
:20p 128g 4 80g 103.0 mm