TM Bluetooth Hands-free Car Kit CS8112 (BT 77P) User Manual Environmental friendly I-2 Function
(please refer to Fig.1) I-2-1 On/Off If you press On/Off , you can:
Switch on and Off Pair Answer a new call Reject a call Make a new call using voice dialing I-2-2 Volume Up Increase the speaker volume To mute/un-mute the microphone I-2-3 Volume Down Redial the last dialed number Decrease the speaker volume Answer call waiting I-2-4 LED There are two LED colors (blue and red) to indicate the state of this Car-Kit
. I-2-5 DC Socket It serves as a recharging power socket for rechargeable batteries or supplies the power to the Car Kit when the car charger is connected to your car. Built-in It allows you and your friend at far end to communicate with quality voice. Microphone I-2-6 I-2-7 Speaker I-2-8 Battery Door Loading and unloading rechargeable batteries by opening the battery Door. 2 Table of Content I-2-9 Visor Clip Clip the hands-free ar C K it under your car's sun visor
. II. How to Use Car charger II-1 Charge the Batteries
Fig.2 please refer to Fig 2 Bluetooth
. ) Thank you for buying the BT 77P, Before you use for the first time, please charge the batteries for 6 hours. After the first time, you can fully charge your low batteries in 4 hours. Warning Use only rechargeable batteries Hands-free Car Kit.
. II-2 Turn on the Hands-free Car Kit If the Hands-free Car Kit is powered off, press and hold On/Off for 2 seconds. A long tone will indicate that the hands-free Car Kit has turned on. At the same time, blue LED will flash for a second. And then, blue LED will keep on flashing every 3 seconds. II-4 Establish Bluetooth Link to establish the link. A beep tone will After pairing, the mobile phone should have connect menu. Please select it is connected. Now you are ready to make and answer calls on the hands-free Car Kit. Note: For other phones, please follow their operation manuals to establish the link!
indicate that the Car Kit II-5 Clip the Hands-free Car Kit onto Your Sun Visor
(Please refer to Fig. 3) Fig.3 5 II-6 Answer an Incoming Call When an incoming call is present, the hands-free Car Kit will ring. Press On/Off and you can answer the call. The blue LED will continue to flash once a second while the call is in session. II- Transfer Calls between This Hands-free Car Kit and Your 7 Bluetooth Phone When you are in session, calls can be transferred from your phone to the hands-free Car Kit and vice versa. Bluetooth V-7-1 V-7-2 Bluetooth From Press On/Off once, the call will be transferred to the Car Kit. phone to the Car Kit From Car Kit to the Please follow the operation manual of your phone. Bluetooth Phone II-8 Make a New Call by Using Voice Dialing II-8-1 When using a Bluetooth Mobile Phone:
II-8-1-1 Press On/Off on the hands-free Car Kit shortly when the Car Kit is standby. Note: Make sure that the voice dialing function is properly set up in the mobile phone and it is within the range of the hands-free Car Kit. II-8-1-2 Put through the call After the beep tone on the hands-free Car Kit, you can make a voice dial by saying the name of the person on the hands-free Car Kit. The call will be connected in a few seconds. II-8-2 When using a mobile phone without Bluetooth built-in and dongle:
Bluetooth requiring a II-8-2-1 Press On/Off on the hands-free Car Kit shortly when the Car Kit is standby. Note: Make sure that the voice dialing function is properly set up in the Mobile phone and it is within the range of the hands-free Car Kit. 3 6 II-3 Pair the Hands-free Car Kit with Your Bluetooth Mobile Phone II-3-1 Put the hands-free Car Kit in pairing mode is powered off, press and hold When the hands-free Car Kit On/Off for 5 seconds. In the first 2 seconds, a long tone will indicate that the hands-free Car Kit has turned on. At the same time, blue LED will flash for a second. At the end of 5 seconds, a double tone will be heard. Then the red and blue LEDs will flash alternatively, which indicates the hands-free Car Kit has entered into the pairing mode. Note: Make Sure the batteries are fully charged
. II-3-2 Put your Bluetooth Mobile Phone in pairing mode Bluetooth Bluetooth II-3-2-1 Follow the operation manual of your mobile phone to start the pairing process. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover devices. may take several seconds to establish a connection. II-3-2-2 Your phone's display will indicate that it has found the new device BT 77P. When you want to pair it, the phone's display would demand a passkey or PIN, then you can enter a sequence of 0000. Bluetooth II-3-3 Pair the hands-free Car Kit with your Bluetooth Mobile Phone The blue LED of hands - free C ar Kit will flash every 3 seconds indicating successful pairing. The phone may also ask whether you want to change the Car Kit's name. We recommend you should approve the name of BT 77P and do not change it. Note: Make sure if pairing does not occur as expected, turn off the hands-free Car Kit and your phone, for 10 seconds. Turn on them again and repeat from Step 3-1 to Step3-3 then wait
. II-8-2-2 Put through the call After the beep tone on the hands-free Car Kit, you can make a voice dial and the call will be connected in a few seconds. II-9 A nswer the call waiting During the active call in session if another call is coming, press Volume Down for 2 seconds will make the mobile phone switch to the waiting call and place the active call on hold. Press Volume Down for 2 seconds again, mobile phone will come back to the first active call. II-10 Mute the Microphone II-10-1 To mute a call Press Volume Up for 2 seconds and a beep tone will indicate the microphone is muted. A periodic reminder tone will be heard while the mute function is active. II-10-2 To un-mute a call When the microphone is muted, press Volume Up for 2 seconds. Then the mute is released and the periodic reminder tone will stop. II-11 End a Call While a call is in session on the hands-free Car Kit, press On/Off and you will disconnect the call. A long tone will indicate that the call has ended. After the call is disconnected, the blue LED will flash normally. II-12 Reject a Call When the hands-free Car Kit is ringing, press On/Off for 2 seconds. Ringing will stop and a long tone will indicate that the call is rejected. II-13 Redial Last Dialed Number To redial the last dialed number, press Volume Down for 2 seconds when the Car Kit is standby. A beep tone will indicate an attempt to redial. 7 1 4 I. II. Profile and Its Function1 I-1 Profile1 I-2 Function2 How to Use 3 II-1 Charge the Batteries3 II-2 Turn on the Hands-free Car Kit3 II-3 Pair the Hands-free Car Kit with Your Mobile Phone4 Link..5 II-4 Establish II-5 Clip the Hands-free Car Kit under Your Sun Visor 5 II-6 Answer an Incoming Call6 II-
Phone..6 II-8 Make a New Call by Using Voice Dialing 6 Transfer Calls between This Hands-free Car Kit and Your Bluetooth Bluetooth Bluetooth 7 Answer the call waiting II- 9
....7 II-10 Mute the Microphone....7 II-11 End a Call.7 II-12 Reject a Call ..7 II-13 Redial Last Dialed Number 7 II-14 Adjust the Speaker Volume.8 II-15 Recharge the Low Batteries..8 II-16 Turn off the Hands-free Car Kit8 II-17 VoIP with USB Dongle9 II-18 Auto connection to the Mobile Phone10 II-19 Auto power off10 III. Maintenance and Safe Use ..........10 IV. Electrical Power Specification of Car Charger / AC Power Adaptor for BT 77P......10 V. Package Contents .............11 FCC Interference statement 12 Bluetooth
. I Profile and Its Function I-1 Profile (Fig.1) 1 2 3 4 5 6 8 9 7 Fig. 1 1. Volume Down 2. Volume Up 3. On/Off 4. DC Socket 5. Microphone 6. LED 7. Speaker 8. Battery Door 9. Visor Clip II-14 Adjust the Speaker Volume
. V Package Contents While a call is in session, pressing and releasing Volume Up will increase the speaker volume, and pressing and releasing Volume Down will decrease the speaker volume. A double tone will be heard whenever the volume limit is reached. II-15 Recharge the Low Batteries
(please refer to Fig.2) The LED of this Car Kit will flash red instead of blue when the battery are low. There will also be a tone every 2 minutes. Please connect the charger cable to the Car Kit. II-15-1 During recharging The LED shows a steady red light if the Car Kit is off, and the red light will dim once every 3 second while the Car Kit is on. II-15-2 Fully charged A steady blue LED represents the Car Kit is off and fully charged. And a blue LED dims once every 3 seconds while the Car Kit is on and fully charged. Note: When the battery level is too low, the hands-free Car Kit will automatically power off. It cannot be powered on again unless the batteries are sufficiently charged. II-16 Turn off the Hands-free Car Kit When the hands-free Car Kit is on, press and hold On/Off for 5 seconds. A long tone will indicate that the Car Kit starts to power off. LED continues to flash for a few seconds. At last LED will turn off and the Car Kit is powered off. Accessories Status 1 Car Charger x Provided 3 x AA Rechargeable Batteries Provided Warning: Use only rechargeable batteries. Disclaimer:
Talk time and stand-by time of the mobile phone model being used. Note:
BQB, CE and FCC approve d Bluetooth Car Kit will vary depending on Bluetooth The SIG, Inc. and any use of such marks by In-Tech Electronics Ltd. is under license. Other trademarks and trade names are those of their respective owners. word mark and logos are owned by the Bluetooth Bluetooth functions and operations may not be available or may vary depending on different mobile phones. 8 11 II-17 VoIP with USB Dongle Federal Communication Commission Interference Statement USB Bluetooth dongle Plug a USB Bluetooth Dongle into your computer, follow the pairing and connecting procedure to link up your Car Kit. Once it is properly set up using the VoIP function, you can use the Car Kit as a speaker phone to enjoy wireless telephone conversation with your friends. Your Car Kit can be used in car, or conveniently be used as a speaker conferencing unit in the office or at home any time. to Part 15 of This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio installed and used in accordance with the frequency energy and, instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
this equipment does cause harmful if not If
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) including interference that may cause undesired operation. this device must accept any interference received, FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 9 12 IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. II-18 Auto connection to the Bluetooth Mobile Phone is turned off and turned on again, If The Car Kit has already been paired with a Bluetooth mobile phone. it will search for available it Bluetooth link. the previously paired mobile phones Bluetooth feature is on, the Car Kit and the mobile phone will re-establish the Bluetooth link automatically. If II-19 Auto power off In order to save power, the Car Kit will turn off automatically after it is disconnected from the Bluetooth link for an hour. III. Maintenance and Safe Use Use dry cloth to clean hands-free Car Kit!
Recycle the batteries after their life time!
Do not expose the Car Kit to liquid or moisture!
Do not expose the Car Kit to fire or open flames!
. IV Electrical Power Specification of Car Charger / AC Power Adaptor for BT 77P The electrical power specification of car charger / AC adaptor for BT 77P Bluetooth Car Kit is as follows:
Output: 5V 1.0A Output pin configuration:
m m 5
. 0 1 1 5V 1.0A NC Ground 2.5mm 10 13