all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual CS8059 | Users Manual | 1.33 MiB | ||||
1 |
|
Manual | Users Manual | 1.32 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Manual CS8059 | Users Manual | 1.33 MiB |
TM CS8059 User Manual User Manual
Headset in den Pairing Mode (Verbindungsmodus) bringen Stellen Sie sicher, dass das HS vollkommen aufgeladen und dass das Ladegert vom Handy getrennt ist, bevor Sie die Verbindung starten. Bei ausgeschaltetem HS 4 Sekunden lang S1 gedrckt halten. Die rote und grne LED-Anzeigen blinken abwechselnd und signalisieren, dass das HS sich im Pairing Mode befindet. Befolgen Sie die Betriebsanleitungen Ihres Bluetooth-Telefones, um den Pairing Vorgang zu starten. Normalerweise muss dazu das Setup- oder Verbindungsmen aufgerufen und dann die Optionen zur Identifikation der Bluetooth Gerte gewhlt werden. Bluetooth braucht einige Sekunden, um eine Verbindung herzustellen. Auf dem Display Ihres Handys erscheint die Meldung, dass das CS8059 Headset gefunden wurde und die Frage, ob Sie es registrieren mchten. In diesem Fall mssen Sie dies besttigen. Das Display des Handys fragt Sie nach einen Passcode oder eine PIN. Geben Sie die Zahlenfolge von 0000 ein.
! Anpassen des HS ans Ohr User Manual 2 4 Wenn die LED-Anzeige des HS alle 3 Sekunden grn blinkt, bedeutet das, dass der Verbindungsvorgang erfolgreich beendet wurde. Normalerweise fragt das Handy, ob Sie den Namen des Headsets ndern mchten. Wir empfehlen Cs8059 als Namen zu besttigen und nicht zu ndern. Sie knnen so viele Headsets und Gerte in Ihrem Handy registrieren, wie Sie mchten. Im Fall, dass der Verbindungsvorgang nicht wie vorgesehen abluft: Schalten Sie das Headset und das Handy aus und warten Sie 10 Sekunden. Nun schalten Sie das Headset und das Handy wieder an und wiederholen Sie die Schritte Pairing Mode von Anfang an. Bluetooth-Verbindung herstellen Nach erfolgreicher Verbindung des HS und des Handys wird das Handy verbinden anzeigen Dann Whlen Sie Ja um die Verbingdung herzustellen Nun sind Sie bereit, ber das HS Anrufe zu machen oder Anrufe anzunehmen. Fr andere Telefone verwenden Sie die jeweiligen Bedienungshandbcher um die Verbindung herzustellen.
. Anrufe annehmen Wenn Sie einen Anruf erhalten, hren Sie ber das HS einen Rufton. Drcken Sie auf S1, beantworten Sie den Anruf. Die grne LED-Anzeige leuchtet kurz und dann wiederholt auf (jede Sekunde) whrend der Anruf im Gange ist.
(Fr Nokia 3650 oder hnliche Modelle) Anrufe weiterleiten Sind Sie mit einem Anrufer verbunden, knnen die Anrufe vom Bluetooth-Telefon auf das HS und vom HS auf das Bluetooth-Telefon weitergeleitet werden. Um die Anrufe vom Bluetooth-Telefon auf das HS weiterzuleiten: Drcken Sie einmal S1, der Anruf wird auf das HS weitergeleitet. Um einen Anruf vom HS auf das Bluetooth-Telefon weiterzuleiten, folgen Sie dem Bedienungshandbuch Ihres Handys. Stummschalten des Mikrofons Um das Mikrofon whrend eines aktuellen Gesprchs stumm zu schalten:
Drcken Sie S2 und S3 gleichzeitig eine Sekunde lang, das Mikrofon wird stumm geschaltet. Ein unterbrochener Beep-Ton ertnt solange die Stumm-Funktion aktiv ist. Stumm-Funktion beenden Wenn das Mikrophon stumm geschaltet ist, drcken Sie S2 und S3 gleichzeitig, um die Stumm-Funktion zu beenden; der Beep-Ton wird beendet. Anrufe beenden Um einen aktuellen Anruf auf dem Headset zu beenden, drcken Sie S1. Danach ist der Anruf beendet und die grne LED-Anzeige blinkt normal. Anruf ber Sprachanwahl starten Bei Mobiltelefonen mit Bluetooth-Technologie:
1. Stellen Sie sicher, dass die Sprachanwahl-Funktion im Mobiltelefon korrekt eingerichtet ist und dass Sie sich in Reichweite des Headsets befinden. Drcken Sie am Headset kurz S1. 2. Sprechen Sie nach Ertnen des Pieptons per Sprachanwahl den Namen der betreffenden Person in das Headset. Der Anruf wird innerhalb weniger Sekunden aufgebaut. Wenn Sie ein Mobiltelefon benutzen, das ber keine eingebaute Bluetooth-
Technologie verfgt oder einen Bluetooth Dongle bentigt:
1. Stellen Sie sicher, dass die Sprachanwahl-Funktion im Mobiltelefon korrekt eingerichtet ist und dass Sie sich in Reichweite des Headsets befinden. Drcken Sie am Headset kurz S1. 2. Bettigen Sie nach Ertnen des Pieptons wie gewhnlich die Sprachanwahl und nach wenigen Sekunden entsteht eine Verbindung. Wahlwiederholung der letzten Nummer hnliche Modelle) Um die letzte gewhlte Nummer neu anzuwhlen, halten Sie S3 2 Sekunden gedrckt. Ein leiser Ton zeigt einen erneuten Wahlversuch an.
(Fr Nokia 3650, Siemens S55, oder
(Fr Nokia 3650, Siemens S55, oder hnliche Modelle) Anruf abweisen Wenn es einen Anruf gibt, den Sie abweisen moechten, druecken Sie bitte den Knopf S1 und halten es bis Sie eine langen Beepton Hoeren, und dann koennen Sie es freilassen. Anpassen der Hrerlautstrke Whrend eines Anrufs, drcken Sie kurz auf S2, um die Lautstrke des Hrers auf dem HS zu erhhen und auf S3, um die Lautstrke zu verringern. Das Erhhen und Verringern der Lautstrke wird durch einen Ton signalisiert. In jedem Fall ertnt ein Warnsignal, wenn das Lautstrkemaximum oder-minimum erreicht wird.
! Ohrhaken Orientierung Um die Orientierung des Ohrhakens zu aendern folgen Sie bitte die Schritte.
! Trageweise 1. Befestigen Sie das Headset mit dem Ohrbgel hinter Ihrem Ohr. 2. Biegen Sie den Ohrbgel vorsichtig, um ihn an Ihr Ohr anzupassen. Anmerkung:vergewissern Sie sich, dass das Mikrofon zum Mund hin gerichtet ist.
Anzeige Akku leer Die HS LED-Anzeige blinkt rot anstatt grn, wenn der Akku fast leer ist. Auerdem ertnt alle paar Minuten ein kurzer Signalton. Wenn der Akku vollkommen leer ist, wird das HS automatisch ausgeschaltet. Es kann solange nicht wieder eingeschaltet werden, bis das Ladegert angeschlossen oder der Akku ausreichend aufgeladen ist. Anschliessen und Laden Um den Akku zu laden verbinden Sie bitte die Ladungskabel mit HS. Waehrend der Ladung blinkt die LED Lampe stabil im Rot. Die Lampe schaltet sich aus wenn der Akku voll geladen ist. Anmerkung: Die Gesprchszeiten des Abe Cs8059 Bluetooth Headsets knnen je nach Handymodell, variieren und sind daher nur Annaeherungswerte.
! Aufladeverbindungsdiagramme
(1) A/C Aufladen AC Mains AC Adaptor ANMERKUNG:
BQB, CE und FCC genehmigt. Abe UB 20S USB Bluetooth Dongle und Abe Cs8059 Bluetooth Headset Voice over Internet Protocol (VoIP) Anwendungmglichkeit
. 1 2
. 3
. 4
. 5
. 6
. 7
. 8
Abe Bluetooth Den Abe UB 20S USB Dongle (separater Kauf) in die USB Buchse am PC stecken Installieren Sie IVT BlueSoleil Bluetooth Applikation von der im UB 20S Paket mitgelieferten CD-ROM. Achtung die CD-ROM ist nicht im Lieferumfang vom CS8059. Download von der entsprechenden Website und installieren von MSN messenger, Netmeeting, Yahoo messenger oder ICQ Anwendungs Software auf den PC Pairing: Bringen Sie das Headset CS8059, wie in der Bedienungsanleitung des CS8059 beschrieben, in den Pairing-Mode. Starten Sie das Anwenderprogramm BlueSolei und pairen den UB 20S Dongle mit dem CS8059 Headset. Die Headset PIN ist 0000 . Verbindungsaufbau und beendigung: Der UB 20S Dongle klingelt das CS8059 Headset an. Bitte drcken Sie die Taste S1, um die Verbindungsanfrage zu besttigen. Um die Bluetooth-Verbindung zu beenden drcken Sie die Taste S1 erneut. Wenn Sie es wnschen knnen Sie jetzt das CS8059 Headset mit Ihrem Bluetooth Handy pairen oder wieder verbinden. berprfen der Bluetooth-Verbindung: Nachdem der UB 20S Dongle und das CS8059 Headset miteinander verbunden sind startet der PC automatisch den Bluetooth Audio Treiber . Spielen Sie mit Windows Media Player oder einem vergleichbaren Programm Musik von Ihrem PC ab; Sie mten jetzt die Musik im Headset hren. Falls dies nicht der Fall sein sollte gehen Sie ber das Bedienfeld -
> Sound- und Audio Gerteeinstellungen -> Audio -> Klangwiedergabe whlen Sie Bluetooth Audio um die Verbindung zu aktivieren. Jetzt knnen Sie die VoIP Anwendung nutzen und kabellos ber Ihr Bluetooth Headset mit Ihren Freunden sprechen. Um das Cs8059 wieder mit Ihrem Blustooth Handy zu verbinden, folgen Sie den Punkten von Headset in den Pairing Mode (Verbindungsmodus) bringen bis Herstellung einer Bluetooth-Verbindung .
, D E Benutzerhandbuch User Manual Bluetooth Headset http://www.abe-hk.com Benutzerhandbuch Inhalt
...... ..... ... ....... ....... ....... ........... ........... ........... ............................................................1 Abbildungen des Headsets..................... ......1 Laden des Akkus ............................... ............................... .....1 Einschalten des Headsets ................................................... Ausschalten des Headsets ................................................... ......1 Headset in den Pairing Mode (Verbindungsmodus) bringen.....................................2
... ......2 Bluetooth-Verbindung herstellen........................................... Anrufe annehmen..................................................................... .......2 Anrufe weiterleiten....................................................... ......... .........2
.... ......2 Stummschalten des Mikrofons.............................................. ... Anrufe beenden............................................................ ...3 Anruf ber Sprachanwahl starten..........................................................................3 Wahlwiederholung der letzten Nummer.................................................................3 Anruf abweisen
...................................................................................................3 Anpassen der Hrerlautstrke..............................................................................3 Ohrhaken Orientierung
.......................................................................................3 Anpassen des HS ans Ohr....................................................................................4 Trageweise.........................................................................................................4 Anzeige Akku leer................................................................................................4 Anschliessen und Laden
.....................................................................................4 Aufladeverbindungsdiagramme.............................. .......5 Voice over Internet Protocol (VoIP) Anwendung.....................................................5
.... ........... ... .................. ................. ........... ... ... ........... .... ........ ..................................... ... Ein Ausschalter S1
) Leiser Taste S3
) LED Anzeige
Anschluss fr das Ladegert Mikrofon Lauter Taste (S2)
Laden des Akkus Vielen Dank fr den Kauf des neuen Abe Benutzung muss der Akku 12 Stunden aufgeladen werden. Cs8059 Bluetooth Ohrbgel H rer Schloss Headsets. Vor der ersten
Bluetooth Headset pictures..............................................................................................................6 Charging the battery.........................................................................................................6 Turning on the Headset....................................................................................................6 Turning off the Headset....................................................................................................6 Putting Headset in Pairing Mode......................................................................................7 Establishing Link..............................................................................................7 Answering incoming calls.................................................................................................7 Transferring calls..............................................................................................................7 Muting the microphone.....................................................................................................7 Ending calls.....................................................................................................................8 To make a new call using voice dialing.............................................................................8 Redialing last dialed number............................................................................................8 Rejecting incoming call.....................................................................................................8 Adjusting speaker volume................................................................................................8 Ear Hook orientation....................................................................................................... 8 Bend the ear hook to fit your ear.......................................................................................9 Putting way.......................................................................................................................9 Low-battery indication......................................................................................................9 Charging and recharging the battery.................................................................................9 Charging Connection Diagrams....................................................................................10 Voice Over Internet Protocol (VOIP) Application............................................................. 10 FCC Interference Statement........................................................................................... 11 Declaration of Conformity...............................................................................................12 On Off S1
Volume Down S3(
) DC Socket LED Microphone Ear hook Speaker Lock Volume Up (S2) Charging the battery Thank you for buying new Abe Cs8059 important to charge the battery for 12 hours. Bluetooth Headset. Before first time use, it is Turning on the Headset While the Headset ( HS ) is powered down, press and hold S1 for 2 seconds. A low tone followed by a high tone will indicate that the HS is powered up. Green LED will turn on for 1 second. Afterward, green LED will flash every 3 seconds. Turning off the Headset While the HS is powered up, press and hold S1 for 3 seconds. A high tone followed by a low tone will indicate that the HS is powered down. And the LED will keep on Red until S1 is released. 6 Putting Headset in Pairing Mode Make sure the HS is fully charged and charging cable disconnected from it before pairing starts. While the HS is powered off, press and hold S1 for 4 seconds. Red and Green LEDs flashing alternately will indicate that the HS is in Pairing Mode. Follow the operating instructions for your mobile phone to start the pairing process. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover Bluetooth may take several seconds to establish a connection. Bluetooth Bluetooth devices.
Your phone s display should indicate that it has found the CS8059 headset and asks if you want to pair it. You should confirm this. The phone s display would prompt you for a passkey or PIN. Enter a sequence of 0000 .
The headset LED will flash Green every 3 seconds, indicating successful pairing. Usually the phone will also ask whether you want to change the headset s name. We recommend you should approve the Cs8059 name and not change it. You can pair as many headsets and devices as you wish in your mobile phone.
If pairing does not occur as expected. Turn the headset and phone off and wait for 10 seconds. Turn the headset and phone on again and repeat all steps from beginning. Bluetooth Establishing After pairing, the mobile phone will show connect then please select YES to establish the link Now you are ready to make and answer calls on the HS For other phones please follow the operation manual to establish the link Link
. Answering Incoming Calls When an incoming call is present, the HS will ring . Pressing S1 will answer the call. The green LED will continue to flash fast while the call is in session.
(Once every second)
(For Nokia 3650 or equivalent models) Transferring Calls When you are in session, calls can be transferred from the HS and from the HS to the Bluetooth phone. Bluetooth phone to the
To transfer a call from the be transferred to the HS. Bluetooth phone to the HS: press S1 once, the call will To transfer a call from HS to the instructions of your phone.
Muting the microphone Bluetooth phone, please follow the operating To mute the microphone during an active call Pressing both S2 and S3 buttons simultaneously for about a second, the microphone will be muted. A periodic beep tone will be heard while the mute function is active. To end the mute function When the microphone is muted, press on both S2 and S3 buttons simultaneously will end the mute function and the periodic beep tone will stop. Einschalten des Headsets Bei ausgeschaltetem Headset (HS), 2 Sekunden lang S1 gedrckt halten. Ein leiser Ton, gefolgt von einem lauten Ton signalisieren, dass das HS angeschaltet ist. Die grne LED-Anzeige leuchtet 2 Sekunden lang auf. Danach blinkt die grne LED-
Anzeige im Abstand von 3 Sekunden. Ausschalten des Headsets Bei eingeschaltetem HS, 3 Sekunden lang S1 gedrckt halten. Ein lauter Ton, gefolgt von einem leisen Ton signalisieren, dass das HS ausgeschaltet ist. Daraufhin leuchtet die rote LED-Anzeige auf bis Sie S1 loslassen.
(1)Trennen Sie das Haken von dem Telefon los
(2)Waehlen Sie die Richtung (links oder rechts) und dann befestigen das Ohrhaken und schliessen es zu. 1 3 5 7
Ending Calls While a call After the call is disconnected, the green LED will flash normally. is in session on the Headset, pressing S1 will disconnect the call. To make a new call using voice dialing When using a Bluetooth mobile phone:
1.Make sure the voice dialing function is probably set up in the Mobile phone and it is within the range of the HS. Press S1 on the HS shortly. 2.After the beep tone on the HS, make a voice dial as you normally would by saying the name of the person on the HS. The call will be connected in a few seconds. When using a mobile phone without Bluetooth built-in and requiring a Bluetooth dongle:
1.Make sure the voice dialing function is probably set up in the mobile phone and it is within the range of the HS. Press S1 on the HS shortly. 2.After the beep tone on the mobile phone, make a voice dial as you normally would and the call will be connected in a few seconds. Redialing last dialed number 3650, Siemens S55, or equivalent models) To redial the last dialed number, press and hold S3 for 2 seconds. Short low tones will indicate an attempt to redial.
(Support handsfree profile mobile only. For Nokia Rejecting incoming call 3650, Siemens S55, or equivalent models) When there is an incoming call and you want to reject it, press the buttons S1 and hold it until you hear a long beep tone, then release it.
(Support handsfree profile mobile only. For Nokia Adjusting Speaker Volume While a call increase the is in session speaker volume; pressing and releasing S3 will decrease the speaker volume
. on the HS
, a warning tone will be heard when the volume level reaches its However maximum or minimum There is a key tone to indicate volume increase or decrease pressing and releasing S2 will
! Ear Hook orientation If you want to change the orientation of ear hook, please follow the following steps.
! Charging Connection
(1) A/C charging AC Mains AC Adaptor
NOTE
, BQB CE and FCC approved
. Abe UB 20S USB Bluetooth Dongle and Abe Cs8059 Bluetooth Headset Voice Over Internet Protocol (VOIP) Application 1. 2. 3. 4. 5. 6. 7. 8. Abe CS8059 Bluetooth Bluetooth Bluetooth Dongle (purchased separately) into the USB application from the CD-ROM provided in the UB 20S Plug the Abe UB 20S USB socket of a PC. Install IVT BlueSoleil package. Note that the CD-ROM is not available in the CS8059 package. Download from the corresponding websites and install MSN messenger, Netmeeting, Yahoo messenger, or ICQ application software in the PC. Pairing: Put the Headset into "pairing" mode by following the steps in the CS8059 User Manual, start the BlueSoleil application and pair the UB 20S Dongle with the CS8059 Headset. The Headset passkey is "0000 Connecting and Disconnecting: The UB 20S Dongle will ring the CS8059 Headset. Please press the S1 key on the headset to confirm the connection request. To disconnect link, press the S1 key again. You can now pair and reconnect your CS8059 Headset to your Link: After the UB 20S Dongle is paired with the CS8059 Testing the Headset, the PC audio will be automatically routed to the Audio driver. Play some music on the PC by Windows Media Player or other music applications; you If you can hear it, then go the should be able to hear the music on the Headset. ound playback
"c
select the Now you can start using the VOIP application and talk to your friend through your headset wirelessly and freely. Connecting Cs8059 Bluetooth follow the steps from 'Putting Headset in Pairing Mode' to Establishing on page 7. ound and Audio Device Properties ->
Audio to activate the link. mobile phone. Please Link'
mobile phone, if you desire. Headset back to your
"S luetooth ontrol Panel ->
Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth udio ->
luetooth the
't
"A
"S
". B B
1) Detach the ear hook from the phone 2) Select the orientation you want (left or right), and attach the ear hook and lock it 8 10 12
! Bend the ear hook to fit your ear
! Putting way 1. Put on the headset with the ear hook behind your ear. 2. Bend the ear hook gently to fit your ear. Notice: Make sure the microphone is pointing towards your mouth.
Low-battery indication The HS LED will flash red instead of green when the battery is low. There will also be a short beep every few minutes. When the battery level is too low, the HS will automatically power off. It cannot be powered on again unless the charger is connected. Charging and recharging the battery To recharge the battery, connect the charger cable to the HS. During recharging, the LED shows a steady red light.When the battery is fully charged, the indicators of red will be off. DISCLAIMER: Talk time and stand-by time of the Abe Cs 059 8 Bluetooth Headset will vary depending on mobile phone model being used Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful there is no guarantee that interference to radio communications. However, interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by harmful turning the equipment off and on, the interference by one of the following measures:
the user is encouraged to try to correct
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that receiver is connected. Consult the dealer or an experienced radio/TV technician for help. to which the This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9 11
1 | Manual | Users Manual | 1.32 MiB |
TM CS8060 User Manual
Headset in den Pairing Mode (Verbindungsmodus) bringen Stellen Sie sicher, dass das HS vollkommen aufgeladen und dass das Ladegert vom Handy getrennt ist, bevor Sie die Verbindung starten. Bei ausgeschaltetem HS 4 Sekunden lang S1 gedrckt halten. Die rote und grne LED-Anzeigen blinken abwechselnd und signalisieren, dass das HS sich im Pairing Mode befindet. Befolgen Sie die Betriebsanleitungen Ihres Bluetooth-Telefones, um den Pairing Vorgang zu starten. Normalerweise muss dazu das Setup- oder Verbindungsmen aufgerufen und dann die Optionen zur Identifikation der Bluetooth Gerte gewhlt werden. Bluetooth braucht einige Sekunden, um eine Verbindung herzustellen. Auf dem Display Ihres Handys erscheint die Meldung, dass das CS8060 Headset gefunden wurde und die Frage, ob Sie es registrieren mchten. In diesem Fall mssen Sie dies besttigen. Das Display des Handys fragt Sie nach einen Passcode oder eine PIN. Geben Sie die Zahlenfolge von 0000 ein.
! Anpassen des HS ans Ohr User Manual 2 4 Wenn die LED-Anzeige des HS alle 3 Sekunden grn blinkt, bedeutet das, dass der Verbindungsvorgang erfolgreich beendet wurde. Normalerweise fragt das Handy, ob Sie den Namen des Headsets ndern mchten. Wir empfehlen CS8060 als Namen zu besttigen und nicht zu ndern. Sie knnen so viele Headsets und Gerte in Ihrem Handy registrieren, wie Sie mchten. Im Fall, dass der Verbindungsvorgang nicht wie vorgesehen abluft: Schalten Sie das Headset und das Handy aus und warten Sie 10 Sekunden. Nun schalten Sie das Headset und das Handy wieder an und wiederholen Sie die Schritte Pairing Mode von Anfang an. Bluetooth-Verbindung herstellen Nach erfolgreicher Verbindung des HS und des Handys wird das Handy verbinden anzeigen Dann Whlen Sie Ja um die Verbingdung herzustellen Nun sind Sie bereit, ber das HS Anrufe zu machen oder Anrufe anzunehmen. Fr andere Telefone verwenden Sie die jeweiligen Bedienungshandbcher um die Verbindung herzustellen.
. Anrufe annehmen Wenn Sie einen Anruf erhalten, hren Sie ber das HS einen Rufton. Drcken Sie auf S1, beantworten Sie den Anruf. Die grne LED-Anzeige leuchtet kurz und dann wiederholt auf (jede Sekunde) whrend der Anruf im Gange ist.
(Fr Nokia 3650 oder hnliche Modelle) Anrufe weiterleiten Sind Sie mit einem Anrufer verbunden, knnen die Anrufe vom Bluetooth-Telefon auf das HS und vom HS auf das Bluetooth-Telefon weitergeleitet werden. Um die Anrufe vom Bluetooth-Telefon auf das HS weiterzuleiten: Drcken Sie einmal S1, der Anruf wird auf das HS weitergeleitet. Um einen Anruf vom HS auf das Bluetooth-Telefon weiterzuleiten, folgen Sie dem Bedienungshandbuch Ihres Handys. Stummschalten des Mikrofons Um das Mikrofon whrend eines aktuellen Gesprchs stumm zu schalten:
Drcken Sie S2 und S3 gleichzeitig eine Sekunde lang, das Mikrofon wird stumm geschaltet. Ein unterbrochener Beep-Ton ertnt solange die Stumm-Funktion aktiv ist. Stumm-Funktion beenden Wenn das Mikrophon stumm geschaltet ist, drcken Sie S2 und S3 gleichzeitig, um die Stumm-Funktion zu beenden; der Beep-Ton wird beendet. Anrufe beenden Um einen aktuellen Anruf auf dem Headset zu beenden, drcken Sie S1. Danach ist der Anruf beendet und die grne LED-Anzeige blinkt normal. Anruf ber Sprachanwahl starten Bei Mobiltelefonen mit Bluetooth-Technologie:
1. Stellen Sie sicher, dass die Sprachanwahl-Funktion im Mobiltelefon korrekt eingerichtet ist und dass Sie sich in Reichweite des Headsets befinden. Drcken Sie am Headset kurz S1. 2. Sprechen Sie nach Ertnen des Pieptons per Sprachanwahl den Namen der betreffenden Person in das Headset. Der Anruf wird innerhalb weniger Sekunden aufgebaut. Wenn Sie ein Mobiltelefon benutzen, das ber keine eingebaute Bluetooth-
Technologie verfgt oder einen Bluetooth Dongle bentigt:
1. Stellen Sie sicher, dass die Sprachanwahl-Funktion im Mobiltelefon korrekt eingerichtet ist und dass Sie sich in Reichweite des Headsets befinden. Drcken Sie am Headset kurz S1. 2. Bettigen Sie nach Ertnen des Pieptons wie gewhnlich die Sprachanwahl und nach wenigen Sekunden entsteht eine Verbindung. Wahlwiederholung der letzten Nummer hnliche Modelle) Um die letzte gewhlte Nummer neu anzuwhlen, halten Sie S3 2 Sekunden gedrckt. Ein leiser Ton zeigt einen erneuten Wahlversuch an.
(Fr Nokia 3650, Siemens S55, oder
(Fr Nokia 3650, Siemens S55, oder hnliche Modelle) Anruf abweisen Wenn es einen Anruf gibt, den Sie abweisen moechten, druecken Sie bitte den Knopf S1 und halten es bis Sie eine langen Beepton Hoeren, und dann koennen Sie es freilassen. Anpassen der Hrerlautstrke Whrend eines Anrufs, drcken Sie kurz auf S2, um die Lautstrke des Hrers auf dem HS zu erhhen und auf S3, um die Lautstrke zu verringern. Das Erhhen und Verringern der Lautstrke wird durch einen Ton signalisiert. In jedem Fall ertnt ein Warnsignal, wenn das Lautstrkemaximum oder-minimum erreicht wird.
Ohrhaken Orientierung Um die Orientierung des Ohrhakens zu aendern folgen Sie bitte die Schritte
! Trageweise 1. Befestigen Sie das Headset mit dem Ohrbgel hinter Ihrem Ohr. 2. Biegen Sie den Ohrbgel vorsichtig, um ihn an Ihr Ohr anzupassen. Anmerkung:vergewissern Sie sich, dass das Mikrofon zum Mund hin gerichtet ist.
Anzeige Akku leer Die HS LED-Anzeige blinkt rot anstatt grn, wenn der Akku fast leer ist. Auerdem ertnt alle paar Minuten ein kurzer Signalton. Wenn der Akku vollkommen leer ist, wird das HS automatisch ausgeschaltet. Es kann solange nicht wieder eingeschaltet werden, bis das Ladegert angeschlossen oder der Akku ausreichend aufgeladen ist. Anschliessen und Laden Um den Akku zu laden verbinden Sie bitte die Ladungskabel mit HS. Waehrend der Ladung blinkt die LED Lampe stabil im Rot. Die Lampe schaltet sich aus wenn der Akku voll geladen ist. Anmerkung: Die Gesprchszeiten des Abe CS8060 Bluetooth Headsets knnen je nach Handymodell, variieren und sind daher nur Annaeherungswerte.
! Aufladeverbindungsdiagramme
(1) A/C Aufladen AC Mains AC Adaptor ANMERKUNG:
BQB, CE und FCC genehmigt. Abe UB 20S USB Bluetooth Dongle und Abe Cs8060 Bluetooth Headset Voice over Internet Protocol (VoIP) Anwendungmglichkeit
. 1 2
. 3
. 4
. 5
. 6
. 7
. 8
Abe Bluetooth Den Abe UB 20S USB Dongle (separater Kauf) in die USB Buchse am PC stecken Installieren Sie IVT BlueSoleil Bluetooth Applikation von der im UB 20S Paket mitgelieferten CD-ROM. Achtung die CD-ROM ist nicht im Lieferumfang vom CS8060. Download von der entsprechenden Website und installieren von MSN messenger, Netmeeting, Yahoo messenger oder ICQ Anwendungs Software auf den PC Pairing: Bringen Sie das Headset CS8060, wie in der Bedienungsanleitung des CS8060 beschrieben, in den Pairing-Mode. Starten Sie das Anwenderprogramm BlueSolei und pairen den UB 20S Dongle mit dem CS8060 Headset. Die Headset PIN ist 0000 . Verbindungsaufbau und beendigung: Der UB 20S Dongle klingelt das CS8060 Headset an. Bitte drcken Sie die Taste S1, um die Verbindungsanfrage zu besttigen. Um die Bluetooth-Verbindung zu beenden drcken Sie die Taste S1 erneut. Wenn Sie es wnschen knnen Sie jetzt das CS8060 Headset mit Ihrem Bluetooth Handy pairen oder wieder verbinden. berprfen der Bluetooth-Verbindung: Nachdem der UB 20S Dongle und das CS8060 Headset miteinander verbunden sind startet der PC automatisch den Bluetooth Audio Treiber . Spielen Sie mit Windows Media Player oder einem vergleichbaren Programm Musik von Ihrem PC ab; Sie mten jetzt die Musik im Headset hren. Falls dies nicht der Fall sein sollte gehen Sie ber das Bedienfeld -
> Sound- und Audio Gerteeinstellungen -> Audio -> Klangwiedergabe whlen Sie Bluetooth Audio um die Verbindung zu aktivieren. Jetzt knnen Sie die VoIP Anwendung nutzen und kabellos ber Ihr Bluetooth Headset mit Ihren Freunden sprechen. Um das Cs8060 wieder mit Ihrem Blustooth Handy zu verbinden, folgen Sie den Punkten von Headset in den Pairing Mode (Verbindungsmodus) bringen bis Herstellung einer Bluetooth-Verbindung .
, D E Benutzerhandbuch User Manual Bluetooth Headset http://www.abe-hk.com Benutzerhandbuch Inhalt
...... ..... ... ....... ....... ....... ........... ........... ........... ............................................................1 Abbildungen des Headsets..................... ......1 Laden des Akkus ............................... ............................... .....1 Einschalten des Headsets ................................................... Ausschalten des Headsets ................................................... ......1 Headset in den Pairing Mode (Verbindungsmodus) bringen.....................................2
... ......2 Bluetooth-Verbindung herstellen........................................... Anrufe annehmen..................................................................... .......2 Anrufe weiterleiten....................................................... ......... .........2
.... ......2 Stummschalten des Mikrofons.............................................. ... Anrufe beenden............................................................ ...3 Anruf ber Sprachanwahl starten..........................................................................3 Wahlwiederholung der letzten Nummer.................................................................3 Anruf abweisen
...................................................................................................3 Anpassen der Hrerlautstrke..............................................................................3 Ohrhaken Orientierung
.......................................................................................3 Anpassen des HS ans Ohr....................................................................................4 Trageweise.........................................................................................................4 Anzeige Akku leer................................................................................................4 Anschliessen und Laden
.....................................................................................4 Aufladeverbindungsdiagramme.............................. .......5 Voice over Internet Protocol (VoIP) Anwendung.....................................................5
.... ........... ... .................. ................. ........... ... ... ........... .... ........ ..................................... ... Ein Ausschalter S1
) Leiser Taste S3
) LED Anzeige
Anschluss fr das Ladegert Mikrofon Lauter Taste (S2)
Laden des Akkus Vielen Dank fr den Kauf des neuen Abe Benutzung muss der Akku 12 Stunden aufgeladen werden. CS8060 Bluetooth Ohrbgel H rer Schloss Headsets. Vor der ersten
Bluetooth Headset pictures..............................................................................................................6 Charging the battery.........................................................................................................6 Turning on the Headset....................................................................................................6 Turning off the Headset....................................................................................................6 Putting Headset in Pairing Mode......................................................................................7 Establishing Link..............................................................................................7 Answering incoming calls.................................................................................................7 Transferring calls..............................................................................................................7 Muting the microphone.....................................................................................................7 Ending calls.....................................................................................................................8 To make a new call using voice dialing.............................................................................8 Redialing last dialed number............................................................................................8 Rejecting incoming call.....................................................................................................8 Adjusting speaker volume................................................................................................8 Ear Hook orientation....................................................................................................... 8 Bend the ear hook to fit your ear.......................................................................................9 Putting way.......................................................................................................................9 Low-battery indication......................................................................................................9 Charging and recharging the battery.................................................................................9 Charging Connection Diagrams....................................................................................10 Voice Over Internet Protocol (VOIP) Application............................................................. 10 FCC Interference Statement........................................................................................... 11 Declaration of Conformity...............................................................................................12 On Off S1
Volume Down S3(
) LED Ear hook Speaker Lock DC Socket Microphone Volume Up (S2) Charging the battery Thank you for buying new Abe CS8060 important to charge the battery for 12 hours. Bluetooth Headset. Before first time use, it is Turning on the Headset While the Headset ( HS ) is powered down, press and hold S1 for 2 seconds. A low tone followed by a high tone will indicate that the HS is powered up. Green LED will turn on for 1 second. Afterward, green LED will flash every 3 seconds. Turning off the Headset While the HS is powered up, press and hold S1 for 3 seconds. A high tone followed by a low tone will indicate that the HS is powered down. And the LED will keep on Red until S1 is released. 6 Putting Headset in Pairing Mode Make sure the HS is fully charged and charging cable disconnected from it before pairing starts. While the HS is powered off, press and hold S1 for 4 seconds. Red and Green LEDs flashing alternately will indicate that the HS is in Pairing Mode. Follow the operating instructions for your mobile phone to start the pairing process. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover Bluetooth may take several seconds to establish a connection. Bluetooth Bluetooth devices.
Your phone s display should indicate that it has found the CS8060 headset and asks if you want to pair it. You should confirm this. The phone s display would prompt you for a passkey or PIN. Enter a sequence of 0000 .
The headset LED will flash Green every 3 seconds, indicating successful pairing. Usually the phone will also ask whether you want to change the headset s name. We recommend you should approve the CS8060 name and not change it. You can pair as many headsets and devices as you wish in your mobile phone.
If pairing does not occur as expected. Turn the headset and phone off and wait for 10 seconds. Turn the headset and phone on again and repeat all steps from beginning. Bluetooth Establishing After pairing, the mobile phone will show connect then please select YES to establish the link Now you are ready to make and answer calls on the HS For other phones please follow the operation manual to establish the link Link
. Answering Incoming Calls When an incoming call is present, the HS will ring . Pressing S1 will answer the call. The green LED will continue to flash fast while the call is in session.
(Once every second)
(For Nokia 3650 or equivalent models) Transferring Calls When you are in session, calls can be transferred from the HS and from the HS to the Bluetooth phone. Bluetooth phone to the
To transfer a call from the be transferred to the HS. Bluetooth phone to the HS: press S1 once, the call will To transfer a call from HS to the instructions of your phone.
Muting the microphone Bluetooth phone, please follow the operating To mute the microphone during an active call Pressing both S2 and S3 buttons simultaneously for about a second, the microphone will be muted. A periodic beep tone will be heard while the mute function is active. To end the mute function When the microphone is muted, press on both S2 and S3 buttons simultaneously will end the mute function and the periodic beep tone will stop. Einschalten des Headsets Bei ausgeschaltetem Headset (HS), 2 Sekunden lang S1 gedrckt halten. Ein leiser Ton, gefolgt von einem lauten Ton signalisieren, dass das HS angeschaltet ist. Die grne LED-Anzeige leuchtet 2 Sekunden lang auf. Danach blinkt die grne LED-
Anzeige im Abstand von 3 Sekunden. Ausschalten des Headsets Bei eingeschaltetem HS, 3 Sekunden lang S1 gedrckt halten. Ein lauter Ton, gefolgt von einem leisen Ton signalisieren, dass das HS ausgeschaltet ist. Daraufhin leuchtet die rote LED-Anzeige auf bis Sie S1 loslassen.
(1)Trennen Sie das Haken von dem Telefon los
(2)Waehlen Sie die Richtung (links oder rechts) und dann befestigen das Ohrhaken und schliessen es zu. 1 3 5 7
Ending Calls While a call After the call is disconnected, the green LED will flash normally. is in session on the Headset, pressing S1 will disconnect the call. To make a new call using voice dialing When using a Bluetooth mobile phone:
1.Make sure the voice dialing function is probably set up in the Mobile phone and it is within the range of the HS. Press S1 on the HS shortly. 2.After the beep tone on the HS, make a voice dial as you normally would by saying the name of the person on the HS. The call will be connected in a few seconds. When using a mobile phone without Bluetooth built-in and requiring a Bluetooth dongle:
1.Make sure the voice dialing function is probably set up in the mobile phone and it is within the range of the HS. Press S1 on the HS shortly. 2.After the beep tone on the mobile phone, make a voice dial as you normally would and the call will be connected in a few seconds. Redialing last dialed number 3650, Siemens S55, or equivalent models) To redial the last dialed number, press and hold S3 for 2 seconds. short low tones will indicate an attempt to redial.
(Support handsfree profile mobile only. For Nokia Rejecting incoming call 3650, Siemens S55, or equivalent models) When there is an incoming call and you want to reject it, press the buttons S1 and hold it until you hear a long beep tone, then release it.
(Support handsfree profile mobile only. For Nokia Adjusting Speaker Volume While a call increase the is in session speaker volume; pressing and releasing S3 will decrease the speaker volume
. on the HS
, a warning tone will be heard when the volume level reaches its However maximum or minimum There is a key tone to indicate volume increase or decrease pressing and releasing S2 will
! Ear Hook orientation If you want to change the orientation of ear hook, please follow the following steps.
! Charging Connection
(1) A/C charging AC Mains AC Adaptor
NOTE
, BQB CE and FCC approved
. Abe UB 20S USB Bluetooth Dongle and Abe Cs8060 Bluetooth Headset Voice Over Internet Protocol (VOIP) Application 1. 2. 3. 4. 5. 6. 7. 8. Abe CS8060 Bluetooth Bluetooth Bluetooth Dongle (purchased separately) into the USB application from the CD-ROM provided in the UB 20S Plug the Abe UB 20S USB socket of a PC. Install IVT BlueSoleil package. Note that the CD-ROM is not available in the CS8060 package. Download from the corresponding websites and install MSN messenger, Netmeeting, Yahoo messenger, or ICQ application software in the PC. Pairing: Put the Headset into "pairing" mode by following the steps in the CS8060 User Manual, start the BlueSoleil application and pair the UB 20S Dongle with the CS8060 Headset. The Headset passkey is "0000 Connecting and Disconnecting: The UB 20S Dongle will ring the CS8060 Headset. Please press the S1 key on the headset to confirm the connection request. To disconnect link, press the S1 key again. You can now pair and reconnect your CS8060 Headset to your Link: After the UB 20S Dongle is paired with the CS8060 Testing the Headset, the PC audio will be automatically routed to the Audio driver. Play some music on the PC by Windows Media Player or other music applications; you If you can hear it, then go the should be able to hear the music on the Headset. ound playback
"c
select the Now you can start using the VOIP application and talk to your friend through your headset wirelessly and freely. Connecting CS8060 Bluetooth follow the steps from 'Putting Headset in Pairing Mode' to Establishing on page 7. ound and Audio Device Properties ->
Audio to activate the link. mobile phone. Please Link'
mobile phone, if you desire. Headset back to your
"S luetooth ontrol Panel ->
Bluetooth Bluetooth Bluetooth Bluetooth Bluetooth udio ->
luetooth the
't
"A
"S
". B B
1) Detach the ear hook from the phone 2) Select the orientation you want (left or right), and attach the ear hook and lock it 8 10 12
! Bend the ear hook to fit your ear
! Putting way 1. Put on the headset with the ear hook behind your ear. 2. Bend the ear hook gently to fit your ear. Notice: Make sure the microphone is pointing towards your mouth.
Low-battery indication The HS LED will flash red instead of green when the battery is low. There will also be a short beep every few minutes. When the battery level is too low , It cannot be powered on again unless the charger is connected. the HS will automatically power off. Charging and recharging the battery To recharge the battery, connect the charger cable to the HS. During recharging, the LED shows a steady red light.When the battery is fully charged, the indicators of red will be off. DISCLAIMER: Talk time and stand-by time of the Abe CS 060 8 Bluetooth Headset will vary depending on mobile phone model being used Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful there is no guarantee that interference to radio communications. However, interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by harmful turning the equipment off and on, the interference by one of the following measures:
the user is encouraged to try to correct
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that receiver is connected. Consult the dealer or an experienced radio/TV technician for help. to which the This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9 11
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-11-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-11-17
|
||||
1 | Applicant's complete, legal business name |
In Tech Electronics Ltd
|
||||
1 | FCC Registration Number (FRN) |
0013630934
|
||||
1 | Physical Address |
Unit A, 13/F, Wing Tai Centre
|
||||
1 |
Kowloon, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
NV6
|
||||
1 | Equipment Product Code |
CS8060
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** T******
|
||||
1 | Title |
R & D Manager
|
||||
1 | Telephone Number |
852 2********
|
||||
1 | Fax Number |
852 2********
|
||||
1 |
j******@in-tech.com.hk
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation (Hwa Ya)
|
||||
1 | Name |
C****** C******
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
C******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation
|
||||
1 | Name |
S****** H********
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
s******@adt.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Headset | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
R****** C****
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC