InBody Touch User Manual InBody Touch Notice FCC warning :
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Notice Canada warning :
- English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
- French:
Cet appareil contient des metteurs/rcepteurs exempts de licence qui sont conformes aux flux RSS exempts de licence de Innovation, Science et dveloppement conomique Canada. Lexploitation est soumise aux deux conditions suivantes: Cet appareil ne doit pas causer dinterfrences. Ce dispositif doit accepter toute interfrence, y compris toute interfrence pouvant causer un fonctionnement indsirable du dispositif Les antennes utilises pour cet metteur doivent tre installes pour assurer une distance de sparation dau moins 20 cm par rapport toutes les personnes et ne doivent pas tre localises ou fonctionner conjointement avec dautres antennes ou metteurs. Les utilisateurs doivent avoir des conditions de fonctionnement de lmetteur pour satisfaire la conformit lexposition RF. List Table of Contents ----------------------------- 2 Quick Guide to Product Features ------------ 3 Product Specification Guide ---------------- 4 - 5 Internal Memory Capacity ------------------- 6 Product Features --------------------------- 7 Package Contents --------------------------- 8 Function Guide ----------------------------- 9 - 11 Remote Control ----------------------------- 12 - 13 Basic Operation Method -------------------- 14- 20 How to Set Up ADB Development Environment -- 21
- 02 -
Quick Guide to Product Features Reinforced Glossy Glass Convenient Safety Casters for Mobility 1080*1920 FHD Resolution RK3288 CPU ANDROID OS CPU GB Clear Viewing Angles Built-in USB Memory Circulatory Heat with IPS Panel 12GB Memory Content Advertising Dissipation Structure 43 inch
(107.5cm) 55 inch
(138cm) Simple Dedicated Remote Control Split-type Advertising Content Equipped with Shopvod LITE Premium Advertising Solution RTC (ON/OFF) Scheduling Touch Screen Multi-touch
- 03 -
Specification #1 InBody Touch Kiosk Specification Model Model InBody Touch Inch Demension Weight Power Input CPU GPU Memory (RAM / FLASH) Resolution Brightness Touch Panel Ethernet WIFI Multi-media Video-codec Video-Format Audio-Format Connector Bluetooth 43inch 43inch : L1780 x W602 x H450mm 43inch : 37.5kg 100V - 240V~, 50-60Hz, 1.2A, 125W Quad-Core Cortex-A17 up to 1.8GHz Mali-T764 GPU, Supports OpenGLES 1.1 and 2.0 DDR3 RAM 2GB (4G optional) / EMMC 16G (32G optional) IPS 1080x 1920, 1080p 350 cd(up to 450cd) 10 Points capacity touch panel (Optional) GIGA Ethernet LAN RJ45 WIFI 2.4Ghz / 5.8Ghz Supports UHD 4K 60fps HW decoding, supports multiple formats including H.265 10-bit, H264 and AVS+ HDR10 and HLG HDR processing FHD 1080p 30fps HW encoding, H.264 VP9-10, H.265 uo to 4Kx2K@60fps,h.265 WMV, MPEG-1, AVS, Realvideo up tp 1080p@60fps MKV, WMV, MPG, MPEG, AVI, MOV, ISO, MP4, RM, JPG MP3, WMA, AAC, WAV, OGG, AC3, FLCA USB2.0 / Ethernet Supporting 4.0
- 04 -
Specification #2 InBody Touch Input port Input port USB 2.0 / USB type 2Port 10/1000/GIGA Mb Ethernet High-Speed eMMC extension interface Power (AC 100V - 220V) Output port Ouput Wireless signal Bulit-in Speaker HDMI (Video / Audio) Wi-Fi (2.4Ghz / 5.8Ghz) Contents Image Language JPG, JPEG, MJPEG, PNG, GIF KOR, ENG, GER, JPN, CHI and more. All languages supported by Android.
* This device has been evaluated for suitability in a work environment and may cause radio interference if used in a domestic setting.
- 05 -
Built-in Memory Memory Information ANDROID OS 16GB Built-In 2GB DDR 16GB Flash Capacity Built-in (16GB) Empty Space 12.2GB Android OS 7.1 2.75GB
- 06 -
Product Features High-Performance Hardware Video Acceleration Support The device supports smooth video playback by accelerating high-capacity, high-definition video data through hardware. Google Play Store Support It is possible to download and install over 700,000 free and paid applications from the Android market through the Google Play Store. (However, some apps may not be compatible due to hardware characteristics.) WiFi 2.4GHz / 5.8GHz Support The device supports WiFi 2.4GHz / 5.8GHz bands, providing a more stable and faster wireless network environment. USB Port Support The support for two USB ports makes it easy to connect additional peripherals such as mice, keyboards, and external hard drives. Excellent Video Playback Capability The device supports FULL-HD (1080x1920) resolution and the H.265 codec, ensuring compatibility with next-generation UHD standards as well as backward compatibility. Wired LAN Connection Support Wired LAN support provides a faster network environment in situations without Wi-Fi. Easy Wireless Peripheral Connection via Bluetooth With Bluetooth functionality, you can easily connect wireless peripherals
(keyboard, mouse, headphones, speakers) using Bluetooth.
- 07 -
Package RC AAA Battery Body Key Antenna Wrench Sub key Display Body Power cable
- 08 -
Design Description 1 2 3 4 5 6
[Front Side]
[Back Side]
[SIDE]
NO Name NO Name 1 2 3 43 inch Display Ventilation Grille Handle 4 5 6 Motherboard Enclosure Terminal Box Antenna
- 09 -
Design Description The bottom base plate can be used fixed floor. to prevent safety accidents, it can be securely fixed to the floor using bolts. To prevent accidents, it is strongly recommended to securely fix it to the floor of the installation site. Fixed floor type 621.40 548.40 621.40 548.40 8.00 0 0
. 8 1 31.97 0 6
. 8 4 3 0 0
. 0 5 4 0 0
. 0 5 6 3
. 5 1 0 4
. 1 5 3
- 1 0 -
Port Description 1 2 3 4 5 NO Fuction NO Function 1 2 3 USB USB Ethernet 4 5 Power Switch (ON/OFF) AC 110V - 220V
- 1 1 -
Remote Controller (Fuction #1) Key information Power button: 1. Short press to sleep mode 2. Press and hold for power off FN FN button: Can copy the button on the TV remote control Previous button : Play Previous file Volume down button: Volume Down Next button: Play the next file Home button: Go to initial main screen Volume Up button : Volume Up Back button: Move to menu and features, etc Direction button: Press button to move OK button : select icons and files and press button to execute Menu Button Mouse button : Mouse mode on/off Number button: Enter a number Settings button: Go to Settings window Clear button: Clear typed texts
- 1 2 -
Remote Controller (Fuction #2) How to learn TV signal (copy TV remote control function) 1. Initiating Copy Mode: Press and hold the FN button on the top right of the remote control for 3-4 seconds until the button lights up in red. This action initiates the copy mode. 2. Selecting the Function to Copy: Press one of the four buttons on the remote control that you wish to copy. Doing so will make the FN button flash, indicating that it's ready to copy the selected function. 3. Aligning Remote Controls for Copying: Position the KIO AK 43 or 55 remote control and the remote control with the desired function to face each other. Then, press the button of the function you wish to copy several times on the source remote control. 4. Completing the Copy Process: Once the desired function is successfully copied, the FN button will light up continuously, indicating that the copying process is complete. Continuing or Ending the Copy Process:
To copy another function, press the FN button again to make it flash, indicating that the remote control is ready to copy another function. If you do not wish to copy any more functions, while the FN button is flashing, press it once more to turn off the LED, exiting the copy mode. FN Top right FN button FN Only four buttons in the TV Learning Zone can copy the function.
- 13 -
Basic operation #1 Keyboad The provided text explains that basic text input can be performed by clicking on the on-screen virtual keyboard with a mouse. For users who frequently need to enter text or input large amounts of text, attaching a USB keyboard (sold separately) is recommended for a more convenient experience. This suggests an option for users to enhance their interaction with the device, especially when extensive typing is required, by using a physical keyboard instead of relying solely on the virtual on-screen keyboard. Press to enter a character. Up, down, left, and right Move the located cursor. On Android Unused button. Mouse
(Wireless mouse & wired mouse compatible)
[ Front of the product ]
[ Wheel - Scroll]
Move to Up and down
[ Left Click ]
Same as touch (Click)
[ Right Click ]
Previous Step
* Optional Product
- 14 -
Basic operation #2 Launcher Screen (Main Screen) Wallpaper: You can place additional applications you want. Quick Menu: You can add the application you want to get a quick run. Shortcut icon description CHROME APP SETTING Using a Chrome browser (Internet) All installed on the product You can search. Shows the application. All product preferences You can manage it.
- 15 -
Basic operation #3 Basic Application Guide Gallery: You can view and manage all your photo files on your device. Calculator: This is a calculator application. Downloads: You can check files such as images, videos, audio, and recent downloads. Watch: You can set the time / notification / stopwatch of Android Touch PC Infos. Music: You can enjoy or manage music files stored inside. Power Manager : The Real Time Control system allows you to control power. Calendar: You can manage schedules through infos. ApkInstaller : This application is used to install apk files. Explorer: You can manage files stored on internal storage and external storage media. Play Store: 700,000 U/Free application in Android Market is available after downloading and installing.
(However, there may be incompatible apps due to hardware characteristics) Video : Allows you to view or manage saved videos.
- 16 -
Basic operation #4 Softkey Description Press the [] button on the Software Key menu to hide the Software Key menu. Screen shot Previous Home Running APPS Volume DOWN Volume UP Screen Rotation Hidden Softkey Power Button infomation Turning off the softkey hidden state Drag the bottom of the screen boundary up to re-output the hidden software key menu.
- 16 -
Basic operation #5 Introducing Settings Menu Wi-Fi: Allows turning wireless and wired networks on or off and using VPN features. USB: Enables configuration of USB-related settings. Ethernet: Offers options to enable or disable Ethernet-related settings. Bluetooth Bluetooth: Provides settings to configure Bluetooth functionality for connecting various wireless devices. DATA More Display Data Usage: Allows monitoring and managing the device's data consumption. More: Access to additional wireless and network-related settings. Display: Configuration of display settings. Special Function Special Function Settings: Includes settings for HDMI and possibly other device-specific Sound Application Notifications: Manages the device's notification settings. Sound: Controls sound settings, including silent mode options. Applications: Manages installed applications.
- 18 -
Basic operation #6 How to Power control (ON / OFF) It's on the bottom soft key Press the power button. Reboot mode: Reboot the device. Sleep mode: Switch the device to sleep mode and turn off the screen. Power Off : Power off the device. Power Management: Run the Power Management app. To check the list of running apps and exit all running apps It's on the bottom soft key Press the button. Upload to the top of the list of running apps Click Clear All to launch the application You can exit.
- 19 -
Basic operation #7 How to open an app BOX Drag from the bottom of your desktop to the top Click the desktop app BOX icon
- 20-
How to Build ADB Development Environment ADB connection instructions 1) Go to the Kreiser website (www.krizer.com ) Download and install the USB Driver from Community Download. 2) Turn on the product power and connect the PC and the product's OTG terminal with a 5PIN to USB cable. 3) Please set USB Connect on from Settings - USB.
- 21 -