Setup Guide 01 Compatible Device 02 Download App 03 Bluetooth ON 04 Location ON 05 Registration ___________________ ___________________ ________________ _______________ _________________ iPhone 4s&later, iPad 3rd Search the app store for Turn phones Set phone location setting Use your email and generation or later. UMSShield Bluetooth ON for UMSshield to Always register for account 06 Add New Device 07 select a profile 08 Pair 09 Phone complete 10 Gateway setup _________________ _____________________ __________________ __________________ ________________ Select Add to select one profile, press Pair in the app, then press Phone Setup is complete For gateway setup:
add a new device enter device name the button on the device, you next is to setup gateway go to press Start in the app should hear beep and device blinks www.indagemtech.com/faq Install only new battery of the same type in your product. 1. For best results, only use type CR2032 battery. 2. 3. Failure to insert battery in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries and causes the batteries to leak. 4. Do not dispose battery in fire 5. Battery should be recycled or disposed as per state and local guidelines. To replace battery:
1) Pull out the battery tray & remove battery 2) 3) Close tray Insert new CR2032 battery with + sign facing down Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. UMS HomeShield is covered with a limited 1 year warranty. You can read the terms of the warranty at http://www.indagemtech.com/pdf/return_and_refund.pdf