Quick Installation Guide for TQ604AUTO KANOPI 4G ROUTER Smart 300M Wireless Broadband Router Quick Installation Guide Conventions Thank you for purchasing portable wireless broadband router. Applicable to portable Wireless-N wireless broadband router, this Installation Guide provides a WebUI-based configuration method and procedure. In this guide, Windows 2000/XP is used as an example. Items list Please check for the following items in the packing box:
300 Mbps wireless router 1
Power adapter 1
Quick Installation Guide 1
Warranty Card 1 Appearance 2 Smart 300M Wireless Broadband Router Quick Installation Guide Interfaces Interface Function DC IN Mini 5 PIN usb port, connecting to a 5V/1A usb power adapter RESET Reset key. Pressing this key for 5 seconds will restore the router to factory settings. SIM Card For inserting sim card slot RJ45 RJ45 port for connecting to an internet access device such as ADSL modem, upper level router or switch. A static IP address, dynamic IP address, or PPPoE can be used for internet access. If connect to a terminal device with an RJ45 port such as a computer, it work as LAN port automatically USB USB port, connecting to a USB mass storage LED indicators Indicator mark State Description SYS SYS Always on System started up and in working state Flash Always on 4G Flashing Off is powered on 3G/4G connection is established Built-in 3G/4G modem normally. Built-in 3G/4G modem is receiving or sending data. Built-in 3G modem is not started. Always on Wireless function is enabled. Wi-Fi Flashing Data is being received or sent via WLAN. Off Wireless function is not enabled ENET Always on WAN port is connected to ethernet equipment properly. Flashing WAN port is receiving or sending data. Installation environment To ensure proper functioning of the router, the operating environment is recommended as follows:
3 Smart 300M Wireless Broadband Router Quick Installation Guide a) Keep away from heat, maintain ventilation b) Lay equipments on flat surface c) Lay equipments in dry environment without dust d) Dismantle power supply and all wirings in thunderstorm weather in case of lightning stroke Note: please supply rated power for equipments. If unmatched power is supplied, router may get damaged. Storage condition Temperature Working status:
0-50 Store status:
-20-70 Humidity 10-85% (non-condensation) 5-90% (non-condensation) System requirement
Broadband Internet service (Ethernet cable access or through xDSL/Cable Modem)
Modulator-demodulator with RJ45 port (unnecessary for ethernet cable connection)
Each PC is equipped with network connection equipment respectively (wireless network card or wire network card and network cable)
Windows 98, Me, NT, 2000, XP, Vista, 7 and other operating systems supporting TCP/IP protocol Internet Explorer 6.0 or higher version
Product installation 1. Hardware connection Please use ancillary power adapter to supply power for router, start router, and then connect your computer to the RJ45 port on the router by using a RJ45 network cable. Prompt: you can connect wireless broadband router via wireless interface. When configuring router for the first time, we recommend you to connect with wire method. The following setting steps are all based on wire connection. 2. Set up your computer network in a correct way The router default LAN ports IP address as 192.168.169.1 and default subnet mask as 255.255.255.0. These values can be modified according to actual condition. The text will explain it with default value. 1) Double click My Network Place on desktop, and click View network connections on dialog box, and select Local Area Connection of corresponding network card on this page. 4 Smart 300M Wireless Broadband Router Quick Installation Guide 2) Double click Local Area Connection, select Internet Protocol (TCP/IP) indialog box popped out, and then click Properties, as the following picture:
3) In Internet Protocol (TCP/IP) Property screen popped out, select obtain an IP addresses automatically and obtain DNS server address automatically, click OK 5 Smart 300M Wireless Broadband Router Quick Installation Guide 3. Log on router configuration page 1) Open IE browser, input at address bar: 192.168.169.1, Enter. 2) In log-in window popped out, input user name: admin; password: admin; then click
"OK. Prompt: both user name and password of initial administrator are: admin; user can 6 Smart 300M Wireless Broadband Router Quick Installation Guide change administrators password after entering into the system. 3) After inputting correct user name and password, one can enter into routers WEB configuration screen. 4. Select way to access the Internet Router supports four wan accesses of static IP, dynamic IP, PPPoE and WiFi repeat. Click corresponding icon at bottom column on home page and select your access method. Router was set into DHCP (dynamic IP) mode as the way to access the Internet when leaving factory.
Select a static IP (fixed IP) If access way provided by network provider for you is static IP, you shall input ISP or IP address, subnet mask, gateway, DNS server and standby DNS server provided by network administrator for you.
Select DHCP (Auto config) 7 Smart 300M Wireless Broadband Router Quick Installation Guide If access way provided by network provider for you is dynamic IP, Please click on the icon DHCP (Auto config) , next you dont need to input anything, click OK directly.
Select PPPoE (ADSL) If your way to access the Internet is ADSL dial-up, you only need to input account information provided by ISP in input box of user name and "command, complete setting, and click OK.
Select WiFi repeate If you want to make current router connect to another exist wireless router though wireless connection, please select this mode. Enter into WiFi repeate setting interface, click "scan all AP, It will list names of surrounding WiFi routers, select the router you need to connect, input password for connection, click OK and complete setting
Select 3G/4G Dial-up If 3G/4G modem uint is built in router, or USB port of router supports connecting 3G/4G dongle, this machine can achieve 3G/4G dial-up networking function. The router supports 8 Smart 300M Wireless Broadband Router Quick Installation Guide automatic configuration function of 3G/4G dial-up parameter. Dial-up parameters of mainland China and global main 3G/4G network operators can be achieved automatic configuration. Users do not need to set by hand. If dial-up networking fails, please confirm according to the following steps:
Step 1: confirm SIM card in effect, in normal service;
Step 2: confirm whether 3G/4G dial-up setting of the router meets setting requirement of your local ISP. After you obatain the correct dial-up parameters, Specific operation procedure is as follows:
Please click 3G/4G" icon on home page and enter into 3G/4G dial-up setting. In dial-up setting, select dial-up parameter, customized definition, input users name, command, dial number, and APN parameter provided by 3G /4G ISP, and click OK. Note:
We cannot eliminate incurrence opportunity of the situation. 3G/4G dongle in present supporting list may not be supported by the device because producer adjusts inter parameters of products in the future. 5. Wireless network setting Complete setting internet access method and configure security setting of wireless network to prevent illegal user access. Click Wifi security settings on home page and appear the following UI:
After basic setting of router is completed, you can click advanced setup icon on home page to check partial connection status of router with ISP. If your routers Internet Configuration shows that corresponding IP address, DNS servers and other information are 9 Smart 300M Wireless Broadband Router Quick Installation Guide obtained successfully, you can surf on internet now. If you need higher function set, please make further setting in menu bar on the left. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The distance from the human body is more than 20 cm. 10