Spider Reader Technical Manual | Spider Reader 2020 Inepro B.V. All rights reserved Spider Reader The most versatile card reader solution Congratulations on your selection of the Inepro Spider Reader. We are certain you will be pleased with your purchase of one of the flexibele solutions of the market. We want to help you get the best result from your Spider Reader. This manual contains information on how to do that; please read it carefully. Due to continuous product improvements this manual is subject to changes without notice. We strongly recommend you read the license agreement to fully understand its coverage and your responsibilities of ownership. Your Inepro dealer is dedicated to your satisfaction and will be pleased to answer your questions and your concerns. Best wishes, Inepro BV. Spider Reader All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher. Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The publisher and the author make no claim to these trademarks. While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document. Revision number R 3. This revision of the manual can be applied to products with version 1.0 or higher. Publisher Inepro B.V. Managing Editor K. de Graaf Technical Editors K. de Graaf Cover Design H. Wagenaar K. de Graaf Team Coordinator R. Groen Production Inepro B.V. Table of Contents Introduction Requirements Components Test 1 2 Software Hardware User Interface LED's 1 1 3 5 7
........................................................................................................................................................ 8
........................................................................................................................................................ 9 11
........................................................................................................................................................ 12 13 15 Technical Specifications Troubleshooting http://www.inepro.com Directives ATTENTION!!
Read this manual carefully before installing the Spider Reader!
Guarentee No guarantee can be given if safety regulations are not followed. Changes and/or modifications Changes and/or modfications whch have not been approved by the responsible party can void the user's authorty to operate the equitement. Security Always disconnect the power supply before handling anything inside the device. For Indoor Use O nly This dev ice may only be used indoors. FC C Feder al C ommunications C ommission - US This dev ice is complies w ith part 15 of the F C C rules, operation is subject to tw o conditions:
(1) This dev ice may not cause harmful interference.
(2) This dev ice must accept any interference receiv ed, includng interference that may cause undesired operation. C E C onfor mit Eur opene ( C onfor m Eur opean Nor m) This dev ice is in conformity w ith the E M C directiv e and low -v oltage directiv e. C onfor mit dIndustr ie C anada A ppareil concerns:
M C R708, M C R708G , DC R708, DC R708G , S C R708 C onfir m C anada Industr ies Relev ant Dev ices:
M C R708, M C R708G , DC R708, DC R708G , S C R708 This dev ice complies w ith Industry C anadas licence-exempt RS S s. O peration is subject to the follow ing tw o conditions:
(1) This dev ice may not cause interference; and
(2) This dev ice must accept any interference, including interference that may cause undesired operation of the dev ice. Le prsent appareil est conforme aux C N R dIndustrie C anada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suiv antes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RC M Regulator y C ompliance M ar k This dev ice is in conformity w ith A ustralian law . End of life dir ectives Inepro is pay ing a lot of attention to env ironmentally -friendly production. Your new dev ice contain materials w hich can be recy cled and reused. A t the end of its life specialised companies can dismantle the discarded dev ice to recy cle the reusable materials and to minimise the amount of materials to be disposed of. P lease observ e the local regulations regarding the disposal of packaging materials, exhausted batteries and old requipment. I Introduction I Part Introduction Introduction In this manual you find the instructions to install and configure your Spider. This manual is meant for all the Inepro Spider Readers. This manual, the Spider Reader hardware and software are subject to change, make sure you have the latest version of this manual, because the older versions may have become obsolete. Function The purpose of the Spider Reader is to read the unique ID contained in the card that is presented to the reader and transfer this ID to a server. In most cases this data will be the card serial number. To facilitate this a variety of card reader software modules have been developed. Our configuration tool will enable you to change the settings on the Spider Reader board. Our reader can read Bluetooth Low Energy, 125KHz and 13,56 MHz Tags. FCC Certified equipment. Note:
Caution! Changes or modifications not expressly approved by INEPRO B.V. could void the users authority to operate the This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense 2 - Spider Reader Requirements II Part Requirements Requirements The Spider Reader has no known requirements other than a USB host that can read a keyboard-like Human Interface Device 4 - Spider Reader Components III Part Components Components P551087 - Spider Cardboard box 200000 - Spider Reader Spider Core Housing Top Spider Antenna Board I Spider Antenna Board II Spider Core Housing Bottom P120647 - External Spider Braille RFID Foil P551364 - Spider Serial Stickers | Desktop sticker | EDP Sticker | 2x QR Serial sticker Check Components Please check if all the components are in the set before you continue with the installation and set-up. Some parts may already have been pre-assembled 6 - Spider Reader Test IV Part Test Software For the Spider there is a tools available each with its specific features. Connect the Spider to a computer or laptop and present a card to the reader. Please note that the reader needs to have the HID RAW Configuration. (See Inepro SCR-MCR-DCR RFID Programmer Tool Full Version manual for more details). Inepro SCR-MCR-DCR Programmer With this tool it is possible to change the behaviour of the card reader, by creating or editing it's configuration file. For example it is possible to change the read out of the RFID card but also the LEDs can be switched off or the volume of the beeper can be changed. Once finished it is possible to store the created settings in a special config file which can be programmed via the SCR-
MCR-DCR RFID Programmer Tool. For more information regarding this SCR-MCR-DCR RFID Programmer Tool please consult it's user manual. Quick-Test with the Windows Calculator:
1. Connect to Inepro Spider Reader to the USB PC or laptop. 2. Start the Calculator application on Windows, set de calculator under 'View' in on 'Scientific'. 3. Set the number system to hex decimal ('Hex'). 4. Present a card to the Inepro Spider Reader. 5. Set the number system to decimal ('Dec') to read out the decimal value of this number. This is the (decimal) card number 8 - Spider Reader Hardware Hardware Physical test Inepro Spider Reader 1. Connect the Inepro Spider Reader to the USB port of a computer. 2. Check the indicator LED's to see if the board is operating as it should. Blue Led burning:
Reader is powered and has connection Put a card on the Spider:
Besides the blue power LED, the yellow and the green LED should lit. Yellow: card detected Green: card recognised. This concludes the hardware test Version 1.0.3 - 9 User Interface V Part On the USB interface board are a number of LEDs. Each of the LED's has a label, explaining their use. See the table below Image Function Standby /
Normal Triggered /
Not OK User Interface LED's Card is not recognized Card in detection field Card Recognized On On On Off Off Off On Reader is on and connected Flashes
(no connection) 12 - Spider Reader Technical Specifications VI Part Technical Specifications 5V 5V DC : A t maximum (depending on the configuration) 0.5 A P C B | P C B/A BS Transparent 37.85 mm x 62.25 mm x 12.5 mm. 32-bit C ortex-M 3 C P U C ore | S TM 32F 103 Specifications Power P ower Supply P ower C onsumption DC Housing M ater ial C olour Dimensions W x D x H CPU A RM SRA M Storage Falsh M emor y Outputs P ico Blade P ID ( P r oduct ID) V ID ( V endor ID) 20 Kb 64 Kb U S B RS 232 0110 1DA 6 Memory (working storage) User Interface LED's Red, Yellow /O range, G reen and Blue Audio P iezo Buzzer 4kH z, M ax. 65 dB Environmental conditions EM I / Safety O per ating T emper atur e ( M etr ic) O per ating T emper atur e ( Non-M etr ic) Relative H umidity ( Non C ondensing) C E, FC C C lass B 0-40 degrees C elsius 32-104 degrees F ahrenheit 10% -90%
14 - Spider Reader Troubleshooting VII Part Troubleshooting Troubleshooting Sometimes things do not work out as expected, if so please read through this section before contacting your service organisation or dealer. Changes are you are able to solve the issue yourself. The section is set up in a Symptom - Prognosis - Resolution format, that is first the symptom is given, then the possible causes and then the resolution for those causes. A - Check if the blue light is flashing, if it is the reader is not connected to the server. Please check the availability of the server Symptom(s): Card not recognized Prognosis: The Spider is not connected Scope: All Devices Resolution:
with another device like a laptop on that network connection. Try again B - If the blue light burns constantly 1) 2) Make sure your card has been linked to your account. 3) C - If the problem has not been solved, please contact your supplier Check if the problem occurs also with other cards, or on other devices. 16 - Spider Reader FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CAUTION 1. Operation temperature:-20~40C 2.The device complies with RF specifications when the device used at 20cm from your body. Inepro BV hereby declares that this Spider is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation. Max power BLE:3.16dBm Tx Frequency: BLE: 2402MHz~2480MHz NFC: 13.56MHz, 125KHz Rx Frequency BLE: 2402MHz~2480MHz, 125KHz NFC: 13.56MHz BLE and NFC can be used in Europe without restriction. Version 1.0.3 - 17