all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 1.78 MiB | / June 12 2018 | |||
1 2 3 | Attestation Statements | / June 12 2018 | ||||||
1 2 3 | Cover Letter(s) | / June 12 2018 | ||||||
1 2 3 | Cover Letter(s) | / June 12 2018 | ||||||
1 2 3 | External Photos | / June 12 2018 | ||||||
1 2 3 | Internal Photos | / June 12 2018 | ||||||
1 2 3 | ID Label/Location Info | / June 12 2018 | ||||||
1 2 3 | RF Exposure Info | / June 12 2018 | ||||||
1 2 3 | Test Report | / June 12 2018 | ||||||
1 2 3 | Test Setup Photos | / June 12 2018 |
1 2 3 | User Manual | Users Manual | 1.78 MiB | / June 12 2018 |
Inforce 6309 User Guide 002685 Rev H November 13, 2018 Submit technical questions at:
http://www.inforcecomputing.com/techweb/
Confidential and Proprietary Inforce Computing, Inc. NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or web sites to: techsupport@inforcecomputing.com. Restricted Distribution: Not to be distributed to anyone who is not an employee of either Inforce Computing or its subsidiaries without the express approval of Inforce Computing. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of Inforce Computing, Inc. Inforce Computing is a trademark of Inforce Computing Incorporated, registered in the United States and other countries. All Inforce Computing Incorporated trademarks are used with permission. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer
(export) laws. Diversion contrary to U.S. and international law is strictly prohibited. Inforce Computing, Inc. 48820 Kato Road, # 600B Fremont, CA 94538 U.S.A. 2018 Inforce Computing, Inc. Inforce 6309 User Guide Revision History Revision History Revision Date Description Author A B C D E F G H 12/January/2016 Initial Release 11/April/2016 Updated Figures 1, 2, 3, 9, and 10 Updated Tables 1 and 2 Updated Section 4.1.8 7/July/2016 Added Section 3.4 25/April/2017 Updated Table 1(Temperature Specifications) in Section 2.3 7/July/2017 Updated Preface & Section 1 24/October/2018 Updated Figure 1 Added section 3.4.3 6/November/2018 13/November/2018 Updated Block Diagram with Crystals Added Warning about RF interference section 2.2 FCC warning sentence in 2.3 RED & CE Frequencies and Power updated section 2.2 DJ DJ DJ MSS MSS DJ DD MM Approval Record Function Checked By Reviewed By Approved By Name SS/DJ VPS PSD Date 13/November/2018 13/November/2018 13/November/2018 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION i Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide License Agreement License Agreement Your use of this document is subject to and governed by those terms and conditions in the Inforce Computing Purchase and Software License Agreement for the APQ8016 based Inforce 6309 development platform, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing a Inforce 6309 development platform from Inforce Computing Inc. (Agreement). You may use this document, which shall be considered part of the defined term Documentation for purposes of the Agreement, solely in support of your permitted use of the Inforce 6309 development platform under the Agreement. Distribution of this document is strictly prohibited without the express written permission of Inforce Computing Inc. and its respective licensors, which they can withhold, condition or delay in its sole discretion. Inforce Computing is a trademark of Inforce Computing Inc., registered in USA and other countries. Qualcomm is a trademark of Qualcomm Inc, registered in the United States and other countries. Other product and brand names used herein may be trademarks or registered trademarks of their respective owners. This document contains technical data that may be subject to U.S. and international export, re-export, or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION ii Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Preface Preface This User Guide familiarizes the end user with the specification, interfaces, setup, and usage of the Inforce 6309 board. Intended Audience This User Guide is intended for technically qualified personnel. It is not intended for general audiences. Document Organization The chapters in this document are arranged as follows:
1. Scope 2. Hardware Specification 3. System Setup and Usage 4. Appendix A 5. Contact Information Conventions The following conventions are used in this document:
CAUTION Cautions warn the user about how to prevent damage to hardware or loss of data. NOTE Notes call attention to important information. References 1. IFC6309X Schematics, 002546 2. IFC6309 Hardware Reference Manual, 002547 Note This document is subject to change without notice. Support Information Every effort has been made to ensure the accuracy of the User Guide. If you have any comments, questions, or support at:
techsupport@inforcecomputing.com this document, regarding technical Inforces contact ideas 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION iii Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Terminology Terminology The table below gives descriptions to some common terms used in the User Guide. Term Description CSI DDR DSI Camera Serial Interface Double Data Rate Display Serial Interface eMMC Embedded Multimedia Card HD High Definition HDMI High-Definition Multimedia Interface I2C Inter-Integrated Circuit JTAG Joint Test Action Group LED MAC MIPI OS OTG PCIe Light-Emitting Diode Media Access Control Mobile Industry Processor Interface Operating System On The Go Peripheral Component Interconnect Express SATA Serial Advanced Technology Attachment SBC SDC SPI Single Board Computer Secure Digital Controller Serial Peripheral Interface UART Universal Asynchronous Receiver Transmitter USB Universal Serial Bus 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION iv Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Table of Contents Table of Contents 1. SCOPE ................................................................................................................................................. 1 2. HARDWARE SPECIFICATION ........................................................................................................... 2 2.1 INTRODUCTION ................................................................................................................................ 2 2.2 ARCHITECTURE ................................................................................................................................ 2 2.3 SYSTEM SPECIFICATION ................................................................................................................ 3 2.4 ELECTRICAL CHARACTERISTICS .................................................................................................. 4 2.5 BOARD LAYOUT AND SUBSYSTEMS ............................................................................................. 4 3. SYSTEM SETUP AND USAGE ........................................................................................................... 6 3.1 HARDWARE SETUP .......................................................................................................................... 6 3.2 HARDWARE OPERATION ................................................................................................................. 6 3.2.1 CONFIGURATION SWITCHES .................................................................................................. 6 3.2.2 LED INDICATIONS ..................................................................................................................... 8 3.2.3 CONNECTOR COORDINATES .................................................................................................. 9 3.2.4 STEPS TO BOOT INFORCE 6309 SBC ................................................................................... 10 3.3 POWER MEASUREMENT ............................................................................................................... 11 3.3.1 5V RAIL ..................................................................................................................................... 11 3.3.2 VPH RAIL .................................................................................................................................. 11 3.4 ANTENNA CONFIGURATIONS ....................................................................................................... 11 3.4.1 GPS ANTENNA SELECTION ................................................................................................... 12 3.4.2 WI-FI ANTENNA SELECTION .................................................................................................. 12 3.4.3 WIFI / BT RF TX SPECFICIATIONS ......................................................................................... 13 4. APPENDIX A ...................................................................................................................................... 14 4.1 CONNECTOR PIN ASSIGNMENTS ................................................................................................ 14 4.1.1 EXPANSION CONNECTOR ..................................................................................................... 14 4.1.2 ADD-ON INTERFACE PINOUT# ............................................................................................... 15 4.1.3 FRONT PANEL HEADER PINOUT........................................................................................... 16 4.1.4 MIPI CAMERA INTERFACE PINOUT# ..................................................................................... 17 4.1.5 LVDS INTERFACE PINOUT# .................................................................................................... 18 4.1.6 DEBUG UART INTERFACE PINOUT ....................................................................................... 19 4.1.7 I2S INTERFACE ........................................................................................................................ 19 4.1.8 JTAG INTERFACE .................................................................................................................... 20 4.1.9 BATTERY INTERFACE PINOUT .............................................................................................. 21 4.1.10 RF CONNECTORS# ................................................................................................................ 21 5. CONTACT INFORMATION ............................................................................................................... 22 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION v Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Table of Figures Table of Figures Figure 1: Block Diagram ................................................................................................................................ 2 Figure 2: Inforce 6309 Board Locations (Top View) ..................................................................................... 4 Figure 3: Inforce 6309 Board Locations (Bottom View) ................................................................................ 5 Figure 4: Configuration Switch SW4 ............................................................................................................. 6 Figure 5: LED Locations on the Board .......................................................................................................... 8 Figure 6: Top Connector Coordinates ........................................................................................................... 9 Figure 7: Bottom Connector Coordinates ..................................................................................................... 9 Figure 8: Lock Screen Display .................................................................................................................... 10 Figure 9: 5V Current Measurement ............................................................................................................ 11 Figure 10: VPH Current Measurement ....................................................................................................... 11 Figure 11: GPS Antenna Topology ............................................................................................................. 12 Figure 12: Wi-Fi Antenna Topology ............................................................................................................ 12 Figure 13: Expansion Connector ................................................................................................................ 14 Figure 14 : Add-On Interface Header .......................................................................................................... 15 Figure 15: Front Panel Header.................................................................................................................... 16 Figure 16: MIPI Camera Connector ............................................................................................................ 17 Figure 17: LVDS Connector ........................................................................................................................ 18 Figure 18 : Debug Header........................................................................................................................... 19 Figure 19 : I2S Header ................................................................................................................................ 19 Figure 20 : JTAG Header ............................................................................................................................ 20 Figure 21 : Battery HDR .............................................................................................................................. 21 Figure 22 : RF Connectors .......................................................................................................................... 21 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION vi Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Table of Tables Table of Tables Table 1: System Hardware Specification ...................................................................................................... 3 Table 2: Inforce 6309 Board Locations ......................................................................................................... 5 Table 3: Boot Selection ................................................................................................................................. 7 Table 4: USB Mode Selection ....................................................................................................................... 7 Table 5: Display Selection............................................................................................................................. 7 Table 6: Auto Boot Selection......................................................................................................................... 7 Table 7: LED Indications ............................................................................................................................... 8 Table 8: GPS Antenna Selection Configurations ........................................................................................ 12 Table 9: Wi-Fi Antenna Selection Configurations ....................................................................................... 13 Table 10: Connector J8 Pinout ................................................................................................................... 14 Table 11: Connector P6 Pinout ................................................................................................................... 15 Table 12: Connector P1 Pinout ................................................................................................................... 16 Table 13: Connector J11/12 Pinout ............................................................................................................ 17 Table 14 : Connector P3 Pinout .................................................................................................................. 18 Table 15 : Connector P2 Pinout .................................................................................................................. 19 Table 16 : Connector P5 Pinout .................................................................................................................. 19 Table 17: Connector P4 Pinout ................................................................................................................... 20 Table 18 : Connector J14 Pinout ................................................................................................................ 21 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION vii Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Scope 1. SCOPE This document describes the system setup and usage of Qualcomm Snapdragon 410 processor-based Inforce 6309 Single Board Computer (SBC). Anti-Static Handling Procedures SBC has exposed PCB and chips. Accordingly, proper anti-static precautions should be employed when handling the kit, including:
Use a grounded anti-static mat Use a grounded wrist or foot strap Hardware Identification Labels Labels are present on the Inforce 6309 board. The following information is conveyed on the Inforce 6309 board:
Serial Number Ethernet MAC Address Wi-Fi and BT MAC Address Product Revision 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Hardware Specification 2. HARDWARE SPECIFICATION 2.1 INTRODUCTION The Inforce 6309 SBC can be used to develop, test, and deploy end-user product solutions around Qualcomm Snapdragon 410, APQ8016 processor. 2.2 ARCHITECTURE The functional diagram of the Inforce 6309 SBC is shown below. Figure 1: Block Diagram 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Hardware Specification 2.3 SYSTEM SPECIFICATION The following table shows the hardware specification of the Inforce 6309 SBC. Table 1: System Hardware Specification Qualcomm Snapdragon 410 APQ8016 (14mm 12mm package) Processor and Peripherals Processor Memory Devices Main Memory and Storage I/O Interfaces 1GB LPDDR, 8GB eMMC Interfaces 1 USB v2.0 (Debug), 2 USB v2.0 (Host), 1 HDMI, 1 LVDS#, 1 Dual MIPI-CSI#,1 UART, 1 UFL-Wi-Fi/BT#,1 UFL-GPS#, 1 uSD, 1 Headset Out, 1 Front-Panel Header, 1 Expansion Header, 1 Add-On Interface#,1 Ethernet#, 1 I2S Header, 1 JTAG#, 1 Battery Header 85mm 54mm (credit-card form factor) 12V DC jack and 12V from add-on interface#
Form Factor Mechanical Power Power Input Others Temperature Specification Software Operating System Linux and Android
# Optional Interfaces. Commercial: 0C to 70C Extended: 30C to 85C NOTE The system has been validated at ambient temperature ranges of 0C to 55C and 10C to 70C for commercial and extended variants respectively. The USB debug and the USB host/Ethernet interfaces are mutually exclusive. HDMI and LVDS interfaces are mutually exclusive. CAUTION
"This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. To comply with FCC's RF radiation exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Hardware Specification 2.4 ELECTRICAL CHARACTERISTICS Power Supplies The Inforce 6309 board is operated from the following sources:
12V DC jack/12V from add-on interface 3.7V battery operation (with limited functionality) NOTE 12V is the default power supply For battery operation:
Populate: R43, R275 Depopulate: R79, R51, R274 2.5 BOARD LAYOUT AND SUBSYSTEMS Figure 2: Inforce 6309 Board Locations (Top View) 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Hardware Specification Figure 3: Inforce 6309 Board Locations (Bottom View) Table 2: Inforce 6309 Board Locations No. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Front Panel Header RJ45 Ethernet Connector#
USB Type A Dual Connector DC Power Jack uHDMI Connector PM8916 PMIC 3.5mm Mic InSpeaker Out Combo Jack Micro-AB USB Connector Debug UART BT/WLAN UFL Connector#
GPS UFL Connector#
Vol + Button Vol Button Power Button LVDS Connector#
No. 16 17 18 Description APQ8016 Processor eMCP Memory 51-Pin Camera Interface#
19 Mounting Holes 20 21 22 23 24 25 26 27 28 29 30 Add-On Interface for PoE/RS485 Card#
Expansion Interface Placeholders for Top Shield#
Placeholders for Bottom Shield#
BT/Wi-Fi PCB Antenna GPS PCB Antenna Boot Select/Configuration Switches Battery Header I2S Header JTAG Header#
uSD Interface
# Optional Interfaces. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage 3. SYSTEM SETUP AND USAGE 3.1 HARDWARE SETUP Set the proper boot configuration using the boot-selection switch on the board. Refer to Section 3.2.1 for more details on various boot configuration settings. Refer to LED locations on the board. Refer to Section 3.2.4 for booting. 3.2 HARDWARE OPERATION 3.2.1 CONFIGURATION SWITCHES SW4 switch on the Inforce 6309 board can be used for configuring the board for various modes of operations. Each position on SW4 has a defined functionality:
Boot configuration Positions 1 and 2 USB mode selection Position 3 Display selection Position 4 Boot-on power Position 5 Figure 4: Configuration Switch SW4 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage Table 3: Boot Selection FORCED_USB_BOOT BOOT_CONFIG1
(Position-1)
(Position-2) Function ON OFF OFF X OFF ON Forces to QFIL mode SDC1 (eMMC) followed by SDC2 (uSD) followed by USB SDC2 (uSD) followed by SDC1 (eMMC) followed by USB Table 4: USB Mode Selection USB_SW_SEL
(Position-3) Function ON OFF Forces to Host Mode Auto Switch Mode Table 5: Display Selection DSI_SELECT_SW
(Position-4) Function ON OFF Forces HDMI Output Auto Switch Mode Table 6: Auto Boot Selection CBLPWR_N
(Position-5) Function ON OFF Directly boots when powered UP Waits for PWR button for booting NOTE X in the above table indicates a DONT CARE situation, i.e., the functionality is independent of that switch position. Position 6 of SW4 is reserved for future use in the Inforce 6309 board. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 7 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage 3.2.2 LED INDICATIONS Table 7: LED Indications Ref. Des. Function LED State DS1 DS2 DS3 DS4 DS5 DS6 User LED (PMIC GPIO 01) User configurable WLAN Status LED ON: When WLAN is switched ON BT Status LED ON: When BT is switched ON User LED (PMIC GPIO 02) User configurable User LED (APQ GPIO 120) User configurable User LED (APQ GPIO 95) User configurable D1 CPU RESET LED ON: When CPU is out of RESET Figure 5: LED Locations on the Board 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage 3.2.3 CONNECTOR COORDINATES Figure 6: Top Connector Coordinates Figure 7: Bottom Connector Coordinates 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 9 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage 3.2.4 STEPS TO BOOT INFORCE 6309 SBC 1. Remove the Inforce 6309 board carefully from the anti-static bag. NOTE Handle with care, while plugging, to avoid physical damage. 2. Connect the display through HDMI or LVDS interfaces. 3. Configure the boot and selection switches. 4. Connect the 12V power adapter to the wall socket. 5. Switch ON the power to the wall socket and press the POWER button, if the board is not in the auto-power ON mode. Android Version: After a few minutes, the "android" logo followed by the lock screen will be displayed on the screen as shown in Figure 8. NOTE Carefully connect the DC connector to the jack provided on the board. Once the processor is out of reset, D1 LED will glow. CAUTION Use only the DC adaptor provided by Inforce Computing. Do not use the third party DC adaptor without our technical support, as it may damage your board. Figure 8: Lock Screen Display NOTE First time booting might take longer than the normal booting. Screenshots shown above are for reference only; the actual display may vary depending on the software release. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 10 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage 3.3 POWER MEASUREMENT The Inforce 6309 board has a current sense resistor and test points on 5V and 3.7V rails for current/power measurement. 3.3.1 5V RAIL TP5 and TP6 shall be used for the current measurement. Both are on the bottom side of the Inforce 6309 board. Figure 9: 5V Current Measurement 3.3.2 VPH RAIL TP7 and TP8 shall be used for the current measurement. Both are on the bottom side of the Inforce 6309 board. Figure 10: VPH Current Measurement 3.4 ANTENNA CONFIGURATIONS Both GPS and Wi-Fi interfaces have provision for onboard PCB antenna and external Antenna. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 11 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage Default Antenna Configurations are given below:
Wi-Fi Interface, Onboard PCB Antenna is default. GPS Interface, external antenna connector is default. 3.4.1 GPS ANTENNA SELECTION Figure 11: GPS Antenna Topology Refer configurations listed below to change the default GPS antenna path. Table 8: GPS Antenna Selection Configurations 3.4.2 WI-FI ANTENNA SELECTION Figure 12: Wi-Fi Antenna Topology 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 12 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide System Setup and Usage Refer configurations listed below to change the default Wi-Fi antenna path. Table 9: Wi-Fi Antenna Selection Configurations 3.4.3 WIFI / BT RF TX SPECFICIATIONS Bluetooth RF TX
(Basic Rate) RF frequency range: 2402 2480 MHz Max output power (GFSK) 12.73 dBm
(Low Energy Mode) RF frequency range: 2402 2480 MHz Max output power: 4.20 dBm WLAN TX power RF output frequency range: 2412 2472 MHz Max Output Power: 15.90 dBm 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 13 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4. APPENDIX A 4.1 CONNECTOR PIN ASSIGNMENTS 4.1.1 EXPANSION CONNECTOR Reference Designator
: J8 Manufacturer
: Molex Manufacturer Part
: 0791077012 Table 10: Connector J8 Pinout Net Number Net GND UART0_RTS_N EXP_CONN_GPIO_1 EXP_CONN_GPIO_2 SPI1_MISO SPI1_MOSI GND SPI0_CS_N SPI0_MOSI I2C0_SDA I2C1_SCL UART0_RX V1P8_EXP 2 4 6 8 10 12 14 16 18 20 22 24 26 1 3 5 7 9 11 13 15 17 19 21 23 25 SYS_5P0 UART0_CTS_N EXP_CONN_GPIO_4 EXP_CONN_GPIO_3 EXP_CONN_GPIO_5 SPI1_CS_N GND SPI0_MISO SPI0_CLK I2C0_SCL SPI1_CLK UART0_TX GND Figure 13: Expansion Connector 1 2 NOTE EXP_CONN_GPIO_X pins have multiple APQ pins connected through a series resistor. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 14 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.2 ADD-ON INTERFACE PINOUT#
Reference Designator
: P6 Manufacturer
: Harwin/Wurth Manufacturer Part
: M22-7140542/62001021821 Table 11: Connector P6 Pinout Net Number Net V3P3_LDO SYS_5P0 CPU_GPIO_102 GND GND 2 4 6 8 10 1 3 5 7 9 V12_POE V12_POE CPU_GPIO_101 RX_ADDON_3V3 TX_ADDON_3V3 Figure 14 : Add-On Interface Header 1 2 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 15 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.3 FRONT PANEL HEADER PINOUT Reference Designator
: P1 Manufacturer
: Molex Manufacturer Part
: 877581450 Table 12: Connector P1 Pinout Net Number Net KEY_VOLP_N PM_RESIN_N NC LED_CPURESET_CATHODE USERLED1_CATHODE USERLED3_CATHODE GND 1 3 5 7 9 11 13 2 4 6 8 10 12 14 PHONE_ON_N APQ_GPIO_108 GND VPH_PWR VPH_PWR VPH_PWR VPH_PWR Figure 15: Front Panel Header 2 1 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 16 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.4 MIPI CAMERA INTERFACE PINOUT#
Reference Designator
: J11/J12 Manufacturer
: JAE Industry Ltd Manufacturer Part
: FI-RE51S-HF-R1500/FI-RE51S-VF-R1300 Number Net Number Net Number Net Table 13: Connector J11/12 Pinout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 VDD_CAM_PIN1 VDD_CAM_PIN2 NC NC NC CSI0_PWDN_CONN I2C2_SDA I2C2_SCL CSI0_RST_CONN GND FLASH_CTRL_EN1_CONN FLASH_NOW_CONN GND NC NC GND MIPI_CSI1_LANE1_EMI_N 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 MIPI_CSI1_LANE1_EMI_P GND CLK_MIPI_CSI1_EMI_P CLK_MIPI_CSI1_EMI_N GND MIPI_CSI1_LANE0_EMI_P MIPI_CSI1_LANE0_EMI_N GND MIPI_CSI0_LANE3_EMI_P MIPI_CSI0_LANE3_EMI_N GND MIPI_CSI0_LANE2_EMI_N MIPI_CSI0_LANE2_EMI_P GND MIPI_CSI0_LANE1_EMI_P MIPI_CSI0_LANE1_EMI_N GND 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 CLK_MIPI_CSI0_EMI_N CLK_MIPI_CSI0_EMI_P GND MIPI_CSI0_LANE0_EMI_N MIPI_CSI0_LANE0_EMI_P GND I2C3_SDA I2C3_SCL CAM_MCLK0 CAM_MCLK2 CSI1_RST_CONN CSI1_PWDN_CONN GND CAM_MCLK1 NC NC NC Figure 16: MIPI Camera Connector 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 17 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.5 LVDS INTERFACE PINOUT#
Reference Designator
: P3 Manufacturer
: Hirose Manufacturer Part
: DF9-41P-1V(32) Table 14 : Connector P3 Pinout Number Net Number Net 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 V3P3_LVDS V3P3_LVDS GND GND LVDS_TX0_P LVDS_TX0_N LVDS_TX1_P LVDS_TX1_N LVDS_TX2_P LVDS_TX2_N LVDS_TX3_P LVDS_TX3_N CLK_170M_0_LVDS_P CLK_170M_0_LVDS_N I2C3_SDA_3P3 I2C3_SCL_3P3 GND GND LVDS_TX4_P LVDS_TX4_N LVDS_TX5_P 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 LVDS_TX5_N LVDS_TX6_P LVDS_TX6_N LVDS_TX7_P LVDS_TX7_N CLK_170M_1_LVDS_P CLK_170M_1_LVDS_N GND GND DISP_PWR_EN_3P3_N LVDS_TS_RST_GPIO12_3P3 DISP_3P3_RST#
LVDS_TS_INT_GPIO13_3P3 BACKLIGHT_PWM_3P3_EN VREG_L5_1P8 V12_SYS_5P0_LVDS GND V12_SYS_5P0_LVDS GND NC Figure 17: LVDS Connector 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 18 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.6 DEBUG UART INTERFACE PINOUT Reference Designator
: P2 Manufacturer
: SHINMENG INDUSTRY CO. Manufacturer Part
: 2011-1X03G00SB Table 15 : Connector P2 Pinout Number Net 1 2 3 UART1_RX_3V3 UART1_TX_3V3 GND CAUTION The UART signal level is 3.3V, and use compatible devices only. Figure 18 : Debug Header 1 4.1.7 I2S INTERFACE Reference Designator
: P5 Manufacturer
: Hirose Manufacturer Part
: DF13A-6P-1.25H (50) Table 16 : Connector P5 Pinout Number Net 1 2 3 4 5 6 APQ_MI2S1_DATA0 APQ_MI2S1_DATA1 APQ_MI2S1_SCLK APQ_MI2S_MCLK APQ_MI2S1_WS GND Figure 19 : I2S Header 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 19 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.8 JTAG INTERFACE Reference Designator
: P4 Manufacturer
: FCI Manufacturer Part
: 98424-G52-10ALF Table 17: Connector P4 Pinout Net Number Net CPU_JTAG_SRST#
NC_CPU_JTAG_RTCK CPU_JTAG_TDO CPU_JTAG_TCK GND 1 3 5 7 9 2 4 6 8 CPU_JTAG_TRST#
CPU_JTAG_TDI CPU_JTAG_TMS JTAG_CONN_DET#
10 VREG_L5_1P8 Figure 20 : JTAG Header 2 1 NOTE JTAG header is depopulated in all the product SKUs. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 20 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Appendix A 4.1.9 BATTERY INTERFACE PINOUT Reference Designator
: J14 Manufacturer
: MOLEX Manufacturer Part
: 874380443 Table 18 : Connector J14 Pinout Number Net 1 2 3 4 VBATT_CONN BATT_ID BATT_THERM GND Figure 21 : Battery HDR 4.1.10 RF CONNECTORS#
Reference Designator
: J7 and J9 Manufacturer
: Hirose Manufacturer Part
: U.FL-R-SMT-1(01) Description Functions
: CONN,CO-AXIAL SMALL RCPT,H=1.25,SMD
: GPS, Wi-Fi/Bluetooth Figure 22 : RF Connectors NOTE For BT/WLAN: On-board PCB antenna is connected, by default. For GPS: External antenna connector (J9) is connected by default, and require an external antenna for operation. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 21 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA Inforce 6309 User Guide Contact Information 5. CONTACT INFORMATION USA (Corporate Headquarters) Inforce Computing, Inc. 48820 Kato Road, # 600B Fremont, California 94538 USA. Phone: +1 510 683 9999 Fax: +1 510 683 9909 For technical assistance refer: https://www.inforcecomputing.com/techweb For technical support contact:
techsupport@inforcecomputing.com For sales contact:
sales@inforcecomputing.com For enquiries: https://www.inforcecomputing.com 2018 Inforce Computing, Inc. All rights reserved. All data provided is for informational purposes only and does not represent any expressed or implied guarantees. At the time of publishing, the information is believed to have been accurate; nevertheless, Inforce Computing doesnt assume responsibility for any errors, omissions, and inaccuracies whatsoever. Product specifications are subject to change without notice. Inforce Computing and the Inforce logo are registered trademarks of Inforce Computing, Inc. in the USA and other countries. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries; used with permission. Qualcomm Snapdragon is a product of Qualcomm Technologies, Inc. Qualcomm Snapdragon, Qualcomm Adreno, Qualcomm Hexagon, Krait and HQV are products of Qualcomm Technologies Inc. All other trademarks and product information are the property of their respective owners. 002685 Rev H MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 22 Confidential and Proprietary Inforce Computing, Inc. Provided under NDA
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-12-06 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
2 | JAD - Part 15 Class A Digital Device | |||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2018-12-06
|
||||
1 2 3 | Applicant's complete, legal business name |
Inforce Computing Inc.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0023989965
|
||||
1 2 3 | Physical Address |
48820 Kato Road, Ste 600B
|
||||
1 2 3 |
Fremont, California 94538
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
P******@element.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
2ADCS
|
||||
1 2 3 | Equipment Product Code |
IFC6309X
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J******** a****
|
||||
1 2 3 | Telephone Number |
510-3********
|
||||
1 2 3 | Fax Number |
510-6********
|
||||
1 2 3 |
j******@inforcecomputing.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | JAD - Part 15 Class A Digital Device | |||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Micro Single Board Computer | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Models: IFC6309X-01-P2, IFC6309X-11-P2, IFC6309X-00-P2, IFC6309X-10-P2, IFC6309X-20-P2, IMP6309X-10-P2, RPT6309X-10-P2, IFC6309-01-P2, IFC6309-11-P2, IFC6309-00-P2, IFC6309-10-P2, IFC6309-06-P2, IFC6309-16-P2, IFC6309-20-P2, IFC6309L-00-P2, IFC6309L-10-P2 | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Waltek Services (Shenzhen) Co., Ltd
|
||||
1 2 3 | Name |
P******** Z******
|
||||
1 2 3 | Telephone Number |
+86-7********
|
||||
1 2 3 |
P******@waltek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412 | 2462 | 0.02328 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2422 | 2452 | 0.01403 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC | 2402 | 2480 | 0.00159 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0128200 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC