FCC ID: O34-ELITE780CD Elite 780 CDPD

by: Ingenico latest update: 2000-10-31 model: ELITE780CD

One grant has been issued under this FCC ID on 10/31/2000 (this is one of three releases in 2000 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked instructions, warrantee terms, drivers, password defaults, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 8
1 ~ 2000-10-31 8

app s				submitted / available
1	Elite RF Installation Guide	Users Manual	pdf	144.71 KiB	September 08 2000
1		Cover Letter(s)	pdf
1		External Photos	pdf
1		Internal Photos	pdf
1		ID Label/Location Info	pdf
1		ID Label/Location Info	pdf		September 08 2000
1		RF Exposure Info	pdf
1		Cover Letter(s)	pdf

exhibit
download
text

Elite RF Installation Guide

Users Manual

pdf

144.71 KiB

September 08 2000

3. The Card Reader:

Terminal is equipped with a bi-directional Magnetic Stripe Reader located immediately above the display. The Magnetic Stripe on the card should face down and to the rear of the terminal. The card should be swiped at uniform speed and pressure, ensuring that the card remains in contact with the bottom of the track throughout the entire swipe action. 4. Smart Card Reader:

The terminal is equipped with Smart Card Reader slot at the front of the terminal for future use. 5. Cleaning procedure:

1. Clean the outside of the terminal with a soft cloth moistened with a mild detergent solution. 2. Never spray cleaning solution directly onto the terminal as drops may enter the unit. 3. Do not use Isopropyl Alcohol based cleaning products. 6. Technical specifications:

6.1 Terminal Features:

Magnetic card reader, ISO1 and ISO2 tracks decoding. 18 key, backlit tactile feedback keyboard with audible tone and color coding. Battery backed-up calendar and clock. RS232 communications channel. Multi-application operating system allowing each application to be downloaded independently of all others. Logical and physical security. 6.2 Network:

The terminal is equipped with an RF modem for exchanging data over one of the following networks:

1. MOBITEX. 2. CDPD 3. ARDIS (DataTac) future option. 6.3 Power supply:

The power adapter is mainly used for charging the internal NiCd battery. Power input voltage Power input frequency Power output

: 120V AC.

: 60 Hz.

: 12V DC, 500mA. 7. Figure 4: DC Plug 6.4 Operating environment Operating temperature : 5 to 40C Humidity : 5% to 90% RH, with no condensation. If you experience trouble :

Call one of the customer service centers listed below:

In Canada:

RBA Inc. 3190 Orlando Drive Mississauga, Ontario L4V 1R5 1-800-387-3938 or (905) 672-1048 In the USA:

IVI Checkmate Inc. TotalCARE 1335 North Meadow Parkway, Suite 116 Atlanta Ga 30076 1-800 - 435-3014

(FCC) US Federal Communications Commission Warnings:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Canadian Department of Communications Warnings:

This digital apparatus does not exceed the Class A limits for radio noise emissions from the digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.

(DOC) Elite 780 RF Installation guide 0130-07056-0200 Magnetic Stripe Card Reader Functions keys Paper Feed Key ADMIN key Smart Card Reader 1. Terminal description:

1.1 Introduction:

The Elite 780RF is a fully self-contained RF EFTPOS terminal with an integrated printer and the functionality to process all smart card, debit and credit purchases. The terminal communicates with the bank using the RF data network. This network is similar to that used for mobile phones except that it is for data only. The terminal features a secure, multi-application operating system, which allows a number of different applications to run on the terminal independently, without jeopardizing software security. 1.2.3 Magnetic Stripe Card Reader:

2.2 Connecting the RF antenna:

This is a bi-directional reader capable of simultaneously reading Tracks 1&2, and is located just above the display. 1.2.4 Modem:

The Modem facilitates data exchange over an RF network. 1.2.5 Printer:

The built-in printer is a high-speed thermal printer (4 lines per second) and is graphics compatible. 1.2.6 Smart Card Reader:

Complies with standard ISO 7816, Sync & Async. 1.3 Package contents are as follows:

1. The Elite 780RF terminal. 2. RF antenna. 3. Wall mount power adapter for charging the NiCd 1. Place the RF antenna connector over the coaxial screw mount located on the back panel. Make sure the wire within the connector fits into the small hole in the coaxial mount. 2. Tighten the connector by turning the antenna attachment clockwise. Printer Compartment LCD Display battery. 4. Thermal printer paper, one roll. 5. Installation guide. CAN key CORR key ENTER key Installation procedure:

2. A Important Note: The battery must be charged for 24 hours before using terminal for any purpose including key injection, program loading or customer use. (See Paragraph 2.3) the 2.1 Paper loading (If required):

1. Open the paper compartment cover. 2. Move the paper load lever forward to disengage the friction roller. 3. Remove the empty paper roll by pressing the roll release lever on the right hand side. 4. Position the paper roll with the end of the roll protruding from UNDERNEATH the roll. 5. Feed the paper under the printers roller until it protrudes from the top of the printer. 6. Fit the paper roll to the spindle and move the paper load lever back to engage the friction roller. 7. Close the cover and test the operation of the printer by pressing Paper Feed key. Coaxial RF antenna screw mount 2.3 Battery charging procedure:

2.3.1 At Installation:

RS232 Port DC Power Jack 1. After unpacking it is important to provide an initial charge. This conditioning cycle is required for the battery pack to reach full capacity quickly. 2. Connect the terminal to AC power using the supplied power pack designed for this terminal. You will know the terminal is receiving AC power when the display stays on continuously. The terminal must be charged continuously for 24 hours. A Make sure that you use the correct AC power adapter supplied with the terminal. Many adapters can appear similar and will plug into the terminal but will not work properly causing erratic behavior, poor charging or even damage to the unit. 2.3.2 Normal use:

A 1. After a full charge the Terminal in normal usage is expected to provide 50 or more transactions before a recharge is required. Slow printing usually indicates the battery is low. Printer Compartment cover Paper Load Lever Metal blade to tear off paper Roll Release Lever 2. This terminal has a reserve capability in the event that more transactions are occasionally needed. As long as the print time is acceptable the Terminal will provide additional transactions beyond normal. The effect will be continued slowdown of the printer as well as a longer recharge cycle. 3. In normal use the charge time is 12 hours. After extended use the terminal will require additional charge time, not exceeding 24 hours. 4. If the terminal has been inactive a number of weeks it may require another 24 hour initial charge. 1.2 The Terminal:

The Elite 780RF terminal has the following peripherals:

1.2.1 Display:

Standard 4 line x 16 character LCD graphic display, with back lighting. 1.2.2 Keypad:

18 keys, with back lighting, with the following special function keys:

F1, F2, and F3 keys: Programmable keys which permit access to terminal level functions and the system menu. Paper Feed key: Performs a 20mm paper feed. ENTER key: is used to confirm the data entered or displayed. CAN key: is used to cancel the current function and return the terminal to the idle state. CORR key: is used to correct any invalid data entry. ADMIN key:

terminal to access is used the administration function menu.

		frequency	equipment class	purpose
1	2000-10-31	824 ~ 849	TNB - Licensed Non-Broadcast Station Transmitter	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2000-10-31
1	Applicant's complete, legal business name	Ingenico
1	FCC Registration Number (FRN)	0008628687
1	Physical Address	79 Torbarrie Road
1		Toronto, Ontario, N/A M3L 1G5
1		Canada

app s	TCB Information
		n/a

app s	FCC ID
1	Grantee Code	O34
1	Equipment Product Code	ELITE780CD

app s	Person at the applicant's address to receive grant or for contact
1	Name	K** K****
1	Telephone Number	(416)******** Extension:
1	Fax Number	(416)********

app s	Technical Contact
1	Firm Name	Ultratech Engineering Labs Inc.
1	Name	T** M** L****
1	Physical Address	3000 Bristol Circle
1		Oakville, Ontario
1		Oakville, Ontario, L6H 6G4
1		Canada
1	Telephone Number	1-877********
1	Fax Number	905-8********
1	E-mail	t******@sympatico.ca

app s	Non Technical Contact
1	Firm Name	Ultratech Engineering Labs Inc.
1	Name	T** M**** L******
1	Physical Address	3000 Bristol Circle
1		Oakville, Ontario
1		Oakville, Ontario, L6H 6G4
1		Canada
1	Telephone Number	1-877********
1	Fax Number	905-8********
1	E-mail	t******@sympatico.ca

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	TNB - Licensed Non-Broadcast Station Transmitter
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Elite 780 CDPD
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Power output listed is ERP. Device is for hand-held use only and has been tested for SAR compliance. The highest reported 1-gram SAR value is 1.51 W/kg .
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	UltraTech Engineering Labs Inc.
1	Name	T****** L**
1	Telephone Number	877-7********
1	Fax Number	905-8********
1	E-mail	t******@ultratech-labs.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	22.901(d)		824.00000000	849.00000000	0.3000000	2.5000000000 ppm	28K8FXW

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: IHDT56AP9 Motorola Mobility LLC 2BF8C-SE30BT EBS Sweden AB 2BF3V-X1 Aishang Interactive (Shenzhen) Technology Co., Ltd 2AJGM-UV18H PO FUNG ELECTRONIC (HK) INTERNATONAL GROUP COMPANY LIMITED 2A4E2-4D-V40 Shantou Xiaowangguo Trading Co., Ltd.