Plugfones SN To achieve functional Headset status operating BTPG-AB1512 Power Shutdown Shutdown Press main function key for about two seconds and automatically enters pairing mode Power Press the main menu key for about 4 seconds Pairing code0000 Tone Hear "Power on"
Hear "Power off"
Return Home United Shutdown Headset off, press the main function button for about 2 seconds Hear "your phone is connected"
United defender turned back automa Shutdown Into the search condition, the search time is about 15 minutes, within 15 minutes if it is not paired headset into the non-connected mobile phone standby (not connected to phone) state Pairing is successful pair Phone connection is successful Standby After connecting a Bluetooth phone is turned off the phone, open another Bluetooth phone, and then reboot headset, the headset automatically enters pairing, the connection is successful, open the two phones Bluetooth headset reboot, the headset will automatically connect to two phones. 7 Simultaneously connect two phones pair 8 9 Disconnect phone Non-connected mobile phone standby indicator (not connected to phone) 10 Off / on voice prompts Standby Standby Power Pairing "Pairing"
After successful pairing hear "Paired"
Hear "your phone is connected"
Hear "your phone is connected"
Hear "your phone is disconnected"
Volume V + and press the function key to open / close the speech prompts voice plus on / voice plus off Volume Adjustment Call, play music Short press the volume V +, V- keys;
Previous / next song Music playback Long press on a button / Long press a button Pause music playback Music playback Press Pause Play call To call To call call Press the main menu key Press the main menu key Press the function key for about 2 seconds to enter the voice dial mode (siri, S-VOICE) Double-click the main function buttons Press the main menu key Call Indicator answer the phone Rejecting a call Voice dialing Last Number Redial hang up the phone Low battery alarm 21 Low-power shutdown Charging Light Charge saturation Even the standby machine Standby calling A variety of power-
on state A variety of power-
on state Charging Charging Battery voltage is below 3.3V Are: prompt every 30 seconds at interva The battery voltage is lower than 3.0V As long as a charge on the red light Fully charge the battery After about 20 minutes if the headset power (including power search for five minutes) is not connected with any compatible phone or other compatible device is automatically shut down. Have Have
/
Have Have Have Have Have 1 2 3 4 5 6 11 12 13 14 15 16 17 18 19 20 22 23 24 25 Handling two calls (it supports only equipped to handle two calls are part of the mobile phone models)
"If you're in a call, there is another call:
1. Press the headset primary function key can end the current call and answer the call;
2. Double-click the main menu button headset can keep the current call and answer an incoming call 3. Press Headset primary f calls;
4. Click headset primary function keys, you can end the current call and retrieve the held call. 5. Press the headset main fu call. Note: To use these features, your phone must support the Bluetooth 1.5 hands-free mode of operation, and phone call waiting (
started. "
26 IOS power display Apple mobile phone power display FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. INNATE DEVICES. LLC 1350S 1000E, Mapleton, UT 84664 .. USA TEL:0086-769-82684098