Product NameSMBT-079(Airoha 1. Product Overview VOL- /Previous song MFB VOL+/Next song so that the lights flash blue. Paring 4. Bluetooth headset to boot into pairing mode (Voice prompt
"Pairing"). Open the Bluetooth setting on your mobile device and search for Bluetooth device. Until the phone find the Bluetooth headset connection, if necessary, Pls enter the password "0000";
LED USB 2. Product Specification Bluetooth VersionV4.2 Chip TypeAIROHA AB1522S Supports Bluetooth ProfilesHFP HSP AVRCP A2DP Transmission range10M Battery capacity170mah Music playback time 8Hrs Talk time8Hrs Standby time300 Hrs Charging time: 2Hrs Battery typeLithium ion battery Product Weight Product Dimensions FunctionAnswer/Reject call, Stop/Start music, next/previous track, Call waiting, Volume control. Charging Charge the headphones through the micro USB charging cable. Bluetooth Open When the LED light is red, its charging. Once its fully charged, the LED light is blue 3. To turn on the headphones Bluetooth, press and hold the MFB for three seconds. The LED will blink alternately blue and red , the headphones will then be ready to pair with your Bluetooth device. Once you have paired the devices, the headphones will automatically connect with your mobile device next time. With the headphones off. simply press and hold the MFB Answer the call When pairing success, Voice prompt Connected. 5. When calling, can hear the call number 09 To answer the call, press the MFB button once. 6. Earphone to Smartphone: Press and hold MFB around 1 Call Transfer second until and alert tone during the call. Transfer back to the Earphone: Press and hold MFB around 1 second until an alert tone. Three-way calling 7. When there is a new incoming call, click the MFB button to hang up the current call and answer the new call. This function should be support mobile phone. When there is a new incoming call, double-click the MFB button, you can keep the current call to answer the new call. This function should be support mobile phone. End Call 8. One click MFB to end the call. 9. Press and hould the MFB 1second during incoming call Reject Call ringing to reject the call. Volume Adjustment Redial Stop redialing 10. One click Volume Up(+) or Volume Down(-) Max volume :Alert tone+ , Min volume :Alert tone 11. Double click MFB button for last number redial. 12. Click the MFB button to stop redial in dial-up mode. 13. When charging, the phone will restore the default setting. 14. One click MFB for Play/Pause. Next/Previous Song Press and hold the(+) for next Song. Default setting Music Play Press and hold the (-) for Previous Song. Power off 15. Press and hold the MFB for 3 seconds in the standby mode. Blinking fast in REDLEDand then off. Voice prompt:Power off. 1 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.