WI-FI BT ADD-ON-CARD USER MANUAL Installation guide and user manual for IOT Card, Wi-Fi+BT, 2.4/5GHz Model:6001223 FCC ID:2ARZI-IWB6001223 IC:24585-IWB6001223 ________________________________________________________________________________________________________________ Innominds Confidential Information Page 1 of 15 WI-FI BT ADD-ON-CARD USER MANUAL CONTENT 1. 2. 3. 4. 5. Product Description ......................................................................................................................................... 3 Technical Specifications ................................................................................................................................. 4 Card descriptions .............................................................................................................................................. 5 Installation /Setup guide (using FX30 as an example IOT host gateway) ........................... 6 Enabling Wi-Fi..................................................................................................................................................... 8 5.1. Station/client mode: ............................................................................................................................................. 8 5.2. For AP/router Mode, type the following commands in putty: ....................................................... 8 6. 7. 8. 9. Enabling Bluetooth ........................................................................................................................................... 9 Enabling BLE ........................................................................................................................................................ 9 Revision history .............................................................................................................................................. 10 Regulatory declarations .............................................................................................................................. 11 ________________________________________________________________________________________________________________ Innominds Confidential Information Page 2 of 15 1. Product Description WI-FI BT ADD-ON-CARD USER MANUAL This Wi-Fi BT IOT add-on card is a network connectivity module that can be plugged into an IOT host. The edge connector pinouts are as per IOT card specifications i.e., a total of 38 pin gold fingers with each side having 19 pins as per standard signal pinouts for IOT host interfacing. This module is built on Qualcomms QCA9377-3 which is a single-die wireless local area network (WLAN) and Bluetooth (BT) combination solution to support 1 1 IEEE 802.11a/b/g/n/ac WLAN standards and BT 4.2 + HS, enabling seamless integration of WLAN/BT and low energy technology. The design supports a low-
power SDIO 3.0 interface for WLAN and a UART/PCM interface for BT. A RP-SMA connector is provided for connecting antenna for WIFI and BT operations. A 48MHz crystal is connected to QCA9377 for clock generation. The QCA9377 has inbuilt PA/LNA for 2.4GHz and external PA/LNA for 5GHz.The card works with 3.3V (core power) and 1.8V (IO power) received from the IOT gateway. There is an on-board 3.3V regulator to make sure the power source is clean and stable to QCA9377. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 3 of 15 WI-FI BT ADD-ON-CARD USER MANUAL 2. Technical Specifications Item Description Product Name IOT Card, WiFi+BT, 2.4/5GHz Product part number 6001223 Chipset Wi-Fi Bluetooth IOT edge connector Interfaces Operating voltage Qualcomm QCA9377-3 Wi-Fi Certified- a/b/g/n/ac, WPA, WPA2 BT4.2 (BDR+EDR) and BLE As per 38 pin IOT card specification (uses 3.3V for power, 1.8V for IO, SDIO & UART for communication). RPSMA female type for antenna connection. 3.3V ( at 859mA max ) input from IOT gateway (host). No battery support. No direct adaptor support. Antenna make (external) Pulse - W1043 Dimensions (H x W x D) 22.3 x 57 x 6.6 mm Weight (Only Card) 5g (only card) and 22g (with antenna) Operating Temperature
-30 Deg. to 75 Deg. Applications IoT solutions in Health Care, Smart Energy, Asset Tracking, Vehicle Telematics, Remote Telemetry, Monitoring and Control. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 4 of 15 3. Card descriptions WI-FI BT ADD-ON-CARD USER MANUAL ________________________________________________________________________________________________________________ Innominds Confidential Information Page 5 of 15 WI-FI BT ADD-ON-CARD USER MANUAL 4. Installation /Setup guide (using FX30 as an example IOT host gateway) Step 1: Open the cover plate of the FX30 module. Step 2: Insert the WBAC card in the IoT slot as shown in figure1:
Figure 1: Module Insertion Step 3: Close the cover plate as shown in figure 2. And put the screws. Figure 2: Fixing Cover Plate Step 4: Insert washer and nut to the WBAC SMA connector as shown in figure 3. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 6 of 15 WI-FI BT ADD-ON-CARD USER MANUAL Figure 3: Washer & Nut threading Step 5: Fix the antenna as shown in the figure 4. Figure 4: Module with Antenna Step 6: Power on the Fx30 module and connect the USB cable to the FX30 module. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 7 of 15 WI-FI BT ADD-ON-CARD USER MANUAL Step 7: Open putty, set SSH mode, type 192.168.2.2 and port as 22 and login. Next when putty console opens, type login as root and leave the password empty. Press enter. 5. Enabling Wi-Fi 5.1. Station/client mode:
After step 7 mentioned above,
./13
./42 To set the router name and password to which this device has to connect, type :
vi /etc/wpa_supplicant.conf
'a' for edit, 'esc' for coming out of editting mode and ':wq' for save and exit. /wifi.sh client Ping the address of the detected router. 5.2. For AP/router Mode, type the following commands in putty:
After step 7 mentioned above,
./13
./42 vi /etc/hostapd.conf Here you need to set the channel number (1 or36), hw_mode (a or g). Also type 'a' for edit, '/textname'for searching, 'n' for next, 'esc' for coming out of editting mode and ':wq' for save and exit. /wifi.sh ap See the wifi ap as 'test' in your laptop. Connect to it from your laptop over wifi and ping its address as 192.168.43.1. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 8 of 15 6. Enabling Bluetooth WI-FI BT ADD-ON-CARD USER MANUAL Type the following commands for Bluetooth After step 7 mentioned above,
./13
./42 btproperty &
btapp gap_menu enable Now you can enable Bluetooth on your testing phone and check for MDM_Flouride and connect to it. Type yes in putty console when asked whether to connection requested can be accepted. 7. Enabling BLE Type the following commands for BLE After step 7 mentioned above,
./13
./42 btproperty &
btapp gap_menu enable rsp_menu rsp_init rsp_start gattctest init gattctest_start_scan ________________________________________________________________________________________________________________ Innominds Confidential Information Page 9 of 15 8. Revision history WI-FI BT ADD-ON-CARD USER MANUAL Rev Date Description Author Approval v0p1 21-Aug-2018 Initial draft version Sudeendra Ganesan V0p2 07-Dec-2018 V0p3 14-Jan-2019 v0p4 16-Jan-2019 Updated version with more details added on the product specification table and instruction added for BLE. Card description diagram added. Tablet of content added Document format updated. Revision history table, Introduction added. Regulatory declaration and logo added Added the additional regulatory warning as advised by lab Prajwal Ganesan Prajwal Ganesan Prajwal Ganesan ________________________________________________________________________________________________________________ Innominds Confidential Information Page 10 of 15 WI-FI BT ADD-ON-CARD USER MANUAL 9. Regulatory declarations FCC Product name: IOT Card, WiFi+BT, 2.4/5GHz Model name: 6001223 FCC ID: 2ARZI-IWB6001223 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device. FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 11 of 15 WI-FI BT ADD-ON-CARD USER MANUAL FCC ID:
2ARZI -IWB6001223 If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID:2ARZI -
IWB6001223 Or Contains When the module is installed inside another device, the user manual of the host must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with Single modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C: 15.247, 15.209 and FCC PART 15E:15.407 requirement, Only if the test result comply with FCC part 15C : 15.247, 15.209 and FCC PART 15E:15.407 requirement, then the host can be sold legally. installed and used ________________________________________________________________________________________________________________ Innominds Confidential Information Page 12 of 15 WI-FI BT ADD-ON-CARD USER MANUAL IC PMN: IOT Card, WiFi+BT, 2.4/5GHz HVIN: 6001223 IC: 24585-6001223 IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device. IC Radiation Exposure Statement This modular complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. For a host manufacture's using a certified modular, if (1) the module's IC number is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the IC number of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module IC:24585-IWB6001223 " or "Contains IC: 24585-IWB6001223" must be used. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux ________________________________________________________________________________________________________________ Innominds Confidential Information Page 13 of 15 WI-FI BT ADD-ON-CARD USER MANUAL licence. L'exploitation est autorise aux deux appareils radio exempts de conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement Le modular peut tre install ou intgr dans un mobile ou rparer une seule chose installation dans nimporte quel appareil portable. Dclaration de rayonnement IC Ce modular complies avec des radiations mettrices de rayonnement Environnement. Ceci ne doit pas tre co-localis ou oprer avec des autres Ce modular doit tre install et obtenu avec une distance minimale de 20 cm entre les radiateurs et le corps de lutilisateur. Pour un hte, on utilise un modular, si (1) le numro de module est non visible Quand on est install dans le serveur, or (2) si le propritaire est commercialis Straightforward commonly used for the access to remove travail so that the number IC en vue Le module est visible;Ensuite, le label permanent a t attribu au module: "Contient le Module IC:" 24585-IWB6001223" ou "contenu IC: 24585-
IWB6001223" doit" be used. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 14 of 15 WI-FI BT ADD-ON-CARD USER MANUAL CE Product name: IOT Card, WiFi+BT, 2.4/5GHz Model: 6001223 Input: 3.3V 859mA max Powered by IOT host Manufacturer: Innominds software Inc Address: 2055 Junction Avenue, Suite 122, San Jose CA 95131 USA Made in India CE Maintenance 1. EUT Operating temperature range: -30 C to 75 C. 2. RatingsInput 1.8V and 3.3V (Powered by IOT host) 3. The device complies with RF specifications when the device used at 20mm from your body. CE Declaration of Conformity Innominds Software Inc hereby declares that this IOT Card, WiFi+BT, 2.4/5GHz is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10). This product is allowed to be used in all EU member states. ________________________________________________________________________________________________________________ Innominds Confidential Information Page 15 of 15