FCC ID: 2A84DMAXSUCPLUS Maxtasy Suction

YOUR SUCTION MASTER+

Congratulations on your purchase of Suction Master+, the worlds most elite pleasure stroker equipped with an unique technology which combines three most pleasurable sensations suction, vibration and warming. Please take a moment to read through this user manual before using the stroker. REMOTE CONTROL CHARGING On/Off Button Vibration Button Warming Button Suction Button Charging Port Make sure to charge your SUCTION MASTER+ together with the remote before the first use. Charing time Suction Master+:

180min Running time Suction Master+:

120min Charing time Remote:

60min Running time Remote:

12hrs In case the battery is getting low, the LED around button area starts flashing fast. Insert the DC plug into the DC port. LED will start flashing slowly indicating charging. Once fully charged LED stops flashing. Charge at least once every 6 months to protect and extend battery lifetime. IMPORTANT: Use only original USB charging cable provided with your MAXTASY product. USB adapter must not have higher charging current than 1A (one amper). BUTTONS CONTROL WITHOUT THE REMOTE BUTTONS CONTROL WITH THE REMOTE On/Off Button Vibration Button Warming Button Suction Button Press and hold On/Off Button on the main unit until it lights up = product is stand-by mode Press and hold On/Off Button on the remote until it lights up = remote control is activated Press Suction Button on the remote shortly once = suction mode 1 turns on Press Suction Button on the remote shortly again = move between suction modes

(total of 10 suction modes) Press and hold Suction Button on the remote = suction function turns off Press Vibration Button on the remote shortly once = vibration mode 1 turns on Press Vibration Button on the remote shortly again = move between vibration modes (total of 10 vibration modes) Press and hold Vibration Button on the remote = vibration function turns off Press Warming Button on the remote once = warming is activated and red light turns on Press Warming Button on the remote again = warming is de-activated and red light turns off Press On/Off Button on the remote shortly anytime = all functions turn off Press and hold On/Off Button on the remote = remote control is de-activated and light turns off TIP: The remote-control range is 5meters Remote does not work Make sure the main unit as well as the remote are in stand-by mode, both On/Off buttons are light up Read BUTTONS CONTROL WITH THE REMOTE Material:

Dimensions:

Weight:

Battery:

Noise Level:

Housing and buttons ABS, inner sleeve TPE Height 10 (255mm) Outer Diameter 3 (85mm) Insertable depth 5 (141mm standard version) Insertable depth 5 (147mm realistic version) 670 g (Standard version) 700 g (Realistic version) Li-Ion 2600 mAh 3.7V

< 45dB Warming - max temp:

98F (36C) Charging Time Suction Master+:

180min Running Time Suction Master+:

120min Charging Time Remote:

Running Time Remote:

Remote Range:

Remote Frequency:

60min 12hr 5meters 433MHz Designed and developed in California U.S.A. Manufactured for Maxtasy in China FCC ID 2A84DMAXSUCPLUS Patented DE file number 20 2021 105 754.8 WEBSITE: www.maxtasy.com SUPPORT: support@maxtasy.com FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Label Maxtasy Suction Model name: MAXSUCPLUS FCC ID: 2A84DMAXSUCPLUS INNOVATION STREET PTE.LTD. 141 CECIL STREET #08-07 TUNG ANN ASSOCIATION BUILDING SINGAPORE 069541 Importer:XXXXXXXXX Address:XXXXXXXXXX

INNOVATION STREET PTE.LTD. 2023.2.27 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, INNOVATION STREET PTE.LTD.hereby authorize Shenzhen LGT Test Service Co., Ltd, to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature ;

Name: Mark T./Project Engineer TCBI FORM-4

Issued by: TCB Administrator Revision 6 12/06/10

INNOVATION STREET PTE.LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date; 2023-2-27 Ref:Attestation Statements Part 2,911(d)(5)(i) Filing FCC ID: 2A84DMAXSUCPLUS

[INNOVATION STREET PTE,LTD,] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2,903 of the FCC rules, Sincerely, INNOVATION STREET PY.LTD. Mark T,/ Project Engineer Signature: fe Rev 1/26/2023 INNOVATION STREET PTE.LTD. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-2-27 Ref:Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:2A84DMAXSUCPLUS

[INNOVATION STREET PTE.LTD.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, INNOVATION STREET PULTD. Mark T./ Project Engipr Signature: Ie i

Rev 1/26/2023

INNOVATION STREET PTE.LTD. 2023,2,27 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (FCC ID:2A84DMAXSUCPLUS) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0,459 of CFR 47. We have requested that the Schematics Block diagram

. Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public, The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. required to be submitted with this application be permanently withheld from public review. Please contact me if there is any information you may need. Sincerely, Name: Markt. Project Engineer TCBI FORM-4 -

a , Issued by: TCB Administrator Revistoiis 12/06/10

Attatatlon Stt(gm@nts 27th Feb. 2023 TO: Federal Authorlzatlen 74S5 OG!kland Colljmbla, Communications and Evaluation Mills Road MD 21046, USA Cemmisslon Division RE: Attestation Statements Part 2J)11(d)(i) request for 2A84D Street PTE. LTD, the undersigned, hereby authorl%e for no less than one year after the grantee of process, Innovation Michelle Street has terminated Liss LLC to act PTE. LTD accepts all Innovation as oyr designated LJ .S, agent for service to maintain marketing Involving and Importation the equipment. an agen-t or the conclusion of any Commls:ilon-related proceeding to act as Liss LLC accepts provides an agent for no less than one year after the grantee has terminated the responsibility U.S. agent for service designated of all Michelle process, marketing and Importation or the conclusion involving the equipment. of any Commission-related proceeding Information:

Applicant Company name: Innovation Contact Address:

Telephone No:

Email: contact@Maxtasy.com Name: Mark T. 141 Cecil Street #08-07, Singapor Street PTE. LTD e 069541 850 Bluebell Ct Carlsbad, CA 92011 u.s, Agent Information:

Liss LLC Company Name: Michelle Address:

FRN: 0033507237 Contact Telephone Email: marty@Maxtasy.com Name: Marty Gozdzik No:

Applicant Signature:

Applicant printed na Agent Signature:

{if the agent Is different Agent printed name: Marty Gozdzik from the applicant)