ALP-XP850 XPEDITION 850 USER MANUAL Introduction Thank you for purchasing our ALP-XP850 Xpedition. We are con-
fident that the Altec Lansing family of products will make your life easier by using the latest technological advancements in sound repro-
duction and will raise the bar for pro audio products. Support At Altec Lansing, our highest priority is making your experience unforgettable. Need help with setting up, troubleshooting, or looking for some tips? Were here for you, Monday through Friday 9AM to 5PM EST. 1-888-703-2307 alteclansing.com 2 ALP-XP850 XPEDITION 850 3 Index Whats Included Warning Power On Lighting Lighting Modes and Color Control Bluetooth Pairing Bluetooth Linking AUX Input Beast Mode Recharge Your Speaker Check Battery Status Charging External Devices Weather Resistance (IP67 Rating) Deep Cup Holders Integrated Bottle Opener Big, Deep Pocket for All Accesories Control the Speaker with a New App Warranty and Repair Limited Warranty Return/Repair 3 4 8 8 8 9 9 10 10 10 10 11 11 12 12 12 12 12 13 13 Whats Included Please ensure that you find these accessories in-
cluded with your ALP-XP850 Xpedition speaker:
1 ALP-XP850 Xpedition Speaker 1 Power Adaptor with cord 1 DC Power Adapter ALP-XP850 XPEDITION 850 4 ALP-XP850 XPEDITION 850 ALP-XP850 XPEDITION 850 5 To reduce the risk of electrical shock, do not open the unit. There are no user replaceable parts inside. Please refer servicing to a qualified Altec Lansing service technician. Do not attempt to return this equipment to your dealer. Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user- serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Altec Lansing service personnel. Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electrical shock, or other hazards. Responsible Party Name:
Innovative Concepts & Designs Company address:
107 Trumbull St-F8 2nd Floor Elizabeth, NJ, 07206 USA FCC ID: 2AE6GALP-XP850 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 8 Power On Turn the Volume knob to 0. Apague completamente el volumen. Press the POWER button. As soon as its on, youll hear Welcome to Altec Lansing. Enciende el boton POWER. Cuando est encendido oirs Welcome to Altec Lansing. Be sure to charge the battery fully before first use. Asegrese de cargar la batera completamente antes de usar la bocina por primera vez. Lighting Lights The Xpedition has lights built into the front of the speaker. La Bocina tiene luces delanteras. Press the "Light" button to switch between the 5 built-in light modes. Presione el botn Light para elegir uno de los 5 modos de iluminacin. To change the color of the current light mode, press and hold the Volume knob for 2 seconds. Para cambiar el color del modo de luz actual, mantenga pulsado el boton Volume durante 2 segundos. Turning the knob will change the color of the lights. There are 12 color combinations including random. You will automatically exit color change mode by not using any control for 2 seconds. Girar el boton Volume cambiar el color de las luces. Hay 12 combinaciones de colores incluyendo al azar. Saldr automticamente del modo de cambio de color al no utilizar ningn control durante 2 segundos. To turn the strobes ON or OFF, press the Strobe button. Para encender o apagar los flashes, presione el botn Strobe. If you are sensitive to flashing lights, please be sure to turn the strobes OFF when using the speaker. Si es sensible a las luces intermitentes, asegrese de apagar las luces estroboscpicas cuando use la bocina. Strobe Lighting Modes and Color Control The Xpedition has multi-color lighting built into the front of the unit. There are 3 main light areas-speakers, rings and the strobes. Pressing the
"Ligths" button directly above the Volume knob cycles through the 5 different lighting modes:
Mode 1: Speakers and rings are always a different color. Lights randomly change color combinations unless user selects a specific combination (then lights remain on user selected combination). Strobes flash at 170 BPM. Mode 2: Strobe flashes at 170 BPM. Speakers and rings are always different colors. Lights change color to the beat of the music. If user selects a combination, lights stay that color and flash to the music. Mode 3: Strobe flashes at 170 BPM. Lights pulse to the beat of the music, with speaker and ring lit the same color. User can change light color. Mode 4: Speakers and rings are always the same color. Lights randomly change color combinations unless user selects a specific color
(then lights remain on user selected color). Strobes flash at 170 BPM. Lighting Color Chart 10 9 11 8 12 1 7 6 2 5 3 4 1. Red 2. Lavendar 3. Royal Blue 4. White 5. Green 6. Light Blue 7. Lime 8. Sky Blue 9. Yellow 10. Purple 11. Turquoise 12. Random Mode 5: All lights off. ALP-XP850 XPEDITION 850 Bluetooth Pairing This allows you to pair a portable device to the Xpedition to play your favorite streaming music. Esto le permite emparejar un dispositivo porttil a la bocina para reproducir su msica favorita. Press the Bluetooth button for 2 seconds. Button will start blinking blue. Presiona el boton Bluetooth en la Bocina. El boton encender una luz azul parpanderante. If your phone is NFC compatible, press the Bluetooth button and tap your phone against the NFC logo on the Xpedition to pair (NFC must be turned on in your portable device settings). Si su telfono es compatible con NFC, toque su telfono contra el logotipo de NFC en la bocina para emparejar (NFC debe estar activado en la configuracin del dispositivo porttil). Note: The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. To pair with Bluetooth, open Bluetooth settings on your mobile device and look in the device list for Altec Xpedition. Select it and complete the pairing process. Para sincronizar Bluetooth, abra la configuracin Bluetooth de su dispositivo mvil y busque en la lista de dispositivos Altec Xpedition. Seleccione y complete el proceso de emparejamiento. BLUETOOTH OFF ON DEVICES Altec XPEDITION Once pairing is complete, the Bluetooth button will light solid blue, and you will be able to enjoy streaming music from your mobile device. Pressing and holding the BT 9 button for 4 seconds will drop the current connection. Cuando se haya completado el apareamiento, el boton Bluetooth encender una luz azul, ahora estara listo para reproducir musica. Al presionar y mantener presionado el botn BT durante 4 segundos, se desconectar la conexin actual. Bluetooth Linking The Xpedition has the ability to link wirelessly with another Xpedition to create a stereo pair. La bocina Xpedition tiene la capacidad de conectarse a otra bocina Xpedition. Select which of the speakers you want to control the music. On that speaker, press the "Link" button. The button will blink to tell you its in search mode. Presione el botn Link en la bocina de que quieras que sea la fuente. El botn parpadear para indicarle que est en modo de bsqueda. Link Now press the "Link" button on the other Xpedition speaker. Ahora presione el botn Link en la otra bocina Xpedition. Link When the 2 speakers have paired, the Link button will light solid. Any music sent to the master speaker will play on both speakers. Cuando las dos bocinas estn emparejados, el botn Link se encender de forma slida. Cualquier msica enviada al bocina fuente se reproducir en ambos bocinas. Note: Many environmental factors can affect the range of Bluetooth devices. To achieve the best performance possible, place your product in the middle of the room and make sure its not blocked by walls, furniture, or other obstructions. ALP-XP850 XPEDITION 850 10 AUX Input The AUX input on the Xpedition allows you to connect a wired external source. La entrada AUX en la bocina le permite conectar una fuente externa con cable. USB OUT AUX IN DC IN 15V 5A 5V/2A When a device is connected to the AUX IN jack, you will not be able to hear the Bluetooth source. Cuando un dispositivo est conectado a la toma AUX IN, no podr escuchar la fuente Bluetooth. Note: The AUX IN is located behind the waterproof cover on the back of the Xpedition. El AUX IN se encuentra detrs de la cubierta impermeable en la parte posterior de la bocina. Beast Mode Pressing the "Beast" button will increase low frequency response and give your music deeper bass. Al presionar el botn Beast, aumentar la respuesta de las bajas frecuencias y le dar a su msica graves ms profundos. BEAST Recharge Your Speaker On DC Power:
The Xpedition is capable of operating and charging from a DC power source, like your cars battery. La bocina es capaz de operar y cargar desde una fuente de alimentacin de DC, como la batera de su automvil. The power supply should provide 15VDC
@ up to 5 A (maximum). La fuente de alimentacin debe proporcionar 15VDC @ hasta 5A (mximo). Check Battery Status You can check the internal battery charging level on the Xpedition by pressing the Volume knob for less than 1 second. Puede comprobar el nivel de carga interna de la batera de la bocina presionando el boton Volume durante menos de 1 segundo. The LED ring around the Volume knob will light, indicating the amount of charge left in the unit (each of the 12 segments represents approximately 8.3%) El anillo LED alrededor del boton Volume se encender, indicando la cantidad de carga restante en la Bocina (cada uno de los 12 segmentos representa aproximadamente 8,3%). Battery level 66.63%
ALP-XP850 XPEDITION 850 Charging External Devices Weather Resistance (IP67 Rating) 11 The Xpedition can charge your phone or other portable device. La Bocina puede cargar otro dispositivo porttil. Using an approved USB charging cable for your device, connect to the USB type A port on the back of the Xpedition. Connect the smaller end to your portable device. Con el cable de carga USB correcto para su dispositivo, conctelo al puerto USB tipo A en la parte posterior de la Bocina. Conecte el extremo ms pequeo a su dispositivo porttil. Once connected, you should see the charging indicator activate on your portable device. Una vez conectado, debe ver que el indicador de carga de su dispositivo porttil indica que est recibiendo una carga. Note: Charging and power ports are located behind the waterproof cover on the back of the Xpedition. Los puertos de carga y de alimentacin se encuentran detrs de la cubierta impermeable en la parte posterior de la bocina. The Altec Lansing Xpedition is IP67 rated, meaning it is dust resistant and capable of being submerged for up to 30 minutes at a depth of 1 meter. However, that doesnt mean your new speaker is indestructible. Other factors like the corrosiveness of the liquid due to it containing salt or chlorine can affect the overall integrity of the enclosure. If your Xpedition is exposed to any substance other than clean water, its a good idea to clean the unit with a clean, soft cloth. Give the unit time to dry completely before connecting it back to mains power. La bocina tiene una clasificacin IP67, lo que significa que es resistente al polvo y puede sumergirse durante 30 minutos a una profundidad de 1 metro. Sin embargo, eso no significa que su nueva bocina sea indestructible. Otros factores, como la corrosividad del lquido debido a que contienen sal o cloro, pueden afectar la integridad general del recinto. Si su Xpedition est expuesta a cualquier sustancia que no sea agua limpia, es una buena idea limpiar la unidad con un pao limpio y suave. Dele tiempo a la unidad para que se seque completamente antes de volver a conectarla a la red elctrica. Note: The unit is only protected when the rear plastic port cover is properly in place, if not, the unit is not sealed from damage and care should be taken to protect it from any exposure to liquids or dust. La bocina solo est protegida cuando la tapa del puerto de plstico trasero est colocada correctamente, de lo contrario, la unidad no est sellada contra daos y se debe tener cuidado de protegerla de cualquier exposicin a lquidos o polvo. ALP-XP850 XPEDITION 850 12 Warranty and Repair:
All Altec Lansing products are designed and manufactured to the highest standards in the industry. With proper care and maintenance, your product will provide years of reliable service. Limited Warranty A. Altec Lansing guarantees its products to be free from defects in materials and workmanship for one
(1) year from the original purchase date. B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by Altec Lansing. C. There are no obligations of liability on the part of Altec Lansing for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, of profit, or costs of removal, installation, or reinstallation. All implied warranties for Altec Lansing, including implied warranties for fitness, are limited in duration to one (1) year from the original date of purchase, unless otherwise mandated by local statutes. Return/Repair A. In the U.S.A., please call our helpful Customer Service Representatives at (888) 703-2307, and they will be happy to give you a Return Authorization Number (RA#) and the address of an authorized service center closest to you. B. After receiving an RA#, include a copy of the original sales receipt, with defective product and a description of the defect. Send by insured freight to: Altec Lansing and use the address provided by your customer service representative. Your RA# must be written on the outside of the package, or processing will be delayed indefinitely!
C. Service covered under warranty will be paid for by Altec Lansing and returned to you. For non-war-
rantied products, Altec Lansing will repair your unit after payment is received. Repair charges do not include return freight. Freight charges will be added to the repair charges. D. On warranty service, you pay for shipping to Altec Lansing, we pay for return shipping within the continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will be charged for freight. E. Please allow 2-3 weeks for return of your product. Under normal circumstances your product will spend no more than 10 working days at Altec Lansing. We are not responsible for shipping times. Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Altec Lansing shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Altec Lansing. It is recommended that all maintenance and service on this product is performed by Altec Lansing or its authorized agents. Altec Lansing will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel. 2019 AL Infinity, LLC. All rights reserved. ALTEC LANSING; HORN Design and related logos are registered trademarks of AL Infin-
ity and used under license; Bluetooth logo is a registered trademark of Bluetooth SIG;The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries; The Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc;
Battery life may vary. This device complies with Part 15 of the FCC rules. An operation is subject to the following two conditions:
(1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. ALP-XP850 XPEDITION 850