FCC ID: 2AWKO-IE1200M WiFi-AC Booster

User Manual WiFi-AC Booster IE-1200M Innovative Energy FCC ID: 2AWKO-IE1200M Feature

Extends 2.4 and 5 GHz WiFi signals from existing WiFi routers for better range

Dual band WiFi up to 1200Mbps

MU-MIMO for simultaneously streaming to multiple devices

High power amplifiers and external antenna array increase range

FastLane technology improves performance using both WiFi bands

Convenient wall plug design for easy, discreet placement

Works with any WiFi router B D A C E High Speed Wi-Fi Extension Easier than Ever Get the whole-home connectivity you need for iPads, smartphones, laptops, & more. Boost the range of your WiFi network to every corner of your home for maximum WiFi performance. Dual band WiFi up to 1.2Gbps. MU-MIMO for simultaneously streaming to multiple devices. Works with any WiFi router. EXTEND | EXTREME RANGE & PERFORMANCE Extreme dual band WiFi speed up to 1.2Gbps External Antennas for Better Range Beamforming+ improves wireless range and reliability Access Point mode creates a WiFi hotspot using a wired Ethernet connection STREAM | ULTIMATE CONNECTIVITY MU-MIMO allows you to go faster by simultaneously streaming to FastLane technology improves performance using both WiFi bands Lan port to connect to wired devices like smart TVs and game consoles multiple devices to WiFi WIRELESS FEATURES Wireless Standards IEEE 802.11ac, IEEE 802.11a,IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 1x10/100M Wan Port 1x10/100M Lan Port WPS button,Rester button WPS,Signal 1227940mm 2 x 5G External Antenna 2 x 2.4G External Antenna EUUSUK Input: AC:100240V50/60Hz Output: 5.0V 1.0A 5GHz 2.4GHz 5GHz:Up to 867Mbps(dynamic) 2.4GHz:Up to 300Mbps(dynamic)

<20dBm (EIRP) Router,AP,Repeater,WISP HARDWARE FEATURES Dimensions ( W x D x H ) Interface Button LEDs Antenna Plug Type Power Supply Frequency Signal Rate Transmit Power Modes Wireless Security OTHERS Package Contents Environment 1 x 1200M Dual Band WIFI Router AC09 1 x RJ45 Cable 1 x Quick Installation Guide Operating Temperature: 0C~40C (32F~104F) Storage Temperature: -40C~70C (-40F~158F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Modulation Technology DBPSK, DQPSK, CCK, 16-QAM, 64-QAM, 256-QAM Support 64/128 bit WEP, WPA-PSK/WPA2-PSK, 802.1x Caution:

This device complies with Part 15 of the FCC rules and Industry Canada licenseexempt RSS standard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcause harmful interference, and (2) this device must accept any interference received, including interferencethatmaycauseundesiredoperation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authoritytooperatetheequipment. Thisradiotransmitter(identifythedevicebycertificationnumberormodelnumberifCategoryII) hasbeenapprovedbyIndustryCanadatooperatewiththeantennatypeslistedbelowwiththe maximumpermissiblegainindicated.Antennatypesnotincludedinthislist,havingagaingreater thanthemaximumgainindicatedforthattype,arestrictlyprohibitedforusewiththisdevice. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installedandoperatedwithaminimumdistanceof20cmbetweentheradiatorandyour body. 5G For 5150-5250 frequency band, Operations in the 5150-5250 band are restricted to indoor usage only. 5G:

Any emission is maintained within the band of operation under all conditions of normal operation. The max. frequency stability is less than 20ppm.

IE-1200M Label Sample and Location Product Name: WiFi-AC Booster Brand: Innovative Energy Model: IE-1200M FCC ID: 2AWKO-IE1200M Made in China This device complies with part 15 of the FCC rules and industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Innovative Energy Systems and Technology Pte Ltd Date: Jul. 31, 2020 File Name Schematics.pdf Block Diagram.pdf Operational Description.pdf Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AWKO-IE1200M Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Innovative Energy Systems and Technology Pte Ltd Signature Tze Siong Lee / Director Typed name and Title

Innovative Energy Systems and Technology Pte Ltd Date: 7/31/2020 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD To Whom It May Concern:

We, Innovative Energy Systems and Technology Pte Ltd, state that our device, FCC ID:

2AWKO-IE1200M, has a non-removable rear cover. The label will be placed on the rear cover. And the label will be visible to the end users when they purchase the product. The back cover can not be moved away, so the FCC ID label has to be placed on the surface of product. Sincerely, Signature

[Tze Siong Lee (Name)]

[Director (Title)]

[Innovative Energy Systems and Technology Pte Ltd (Company name)]

Innovative Energy Systems and Technology Pte Ltd FCC ID: 2AWKO-IE1200M POWER OF ATTORNEY Date: Jul. 31, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd.

(Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Jul. 30, 2021. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Innovative Energy Systems and Technology Pte Ltd are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Innovative Energy Systems and Technology Pte Ltd Signature Tze Siong Lee / Director Typed name and Title

Innovative Energy Systems and Technology Pte Ltd Date: 2020-07-31 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AWKO-IE1200M To Whom It May Concern:

This letter is to statement that IE-1200M / WiFi-AC Booster has been tested according to FCC Part 15B by Waltek Services (Shenzhen) Co., Ltd. (Test Report No.: WTF20S05031692E). And the SDOC file, meetting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Sincerely, Signature

[Tze Siong Lee]

[Director]

[Innovative Energy Systems and Technology Pte Ltd]