User manual V3 3. Brand Name and Model 4. How to operate 5. Install App 6. How to scan 7. Specification 8. Notice 9. Manufacturer details Page. 2 Contents:
Page Brand Name: PopTag Page. 3 Model: 010 Page. 4 How to operate:
1. Scan the QR code on the front of the PopTag using an Apple Iphone X camera. Get the code: Example below. 2. Add a description for the PopTag. For example Tag for car parts and add the description into a book. Description: Tag for car parts Code: D8 BF 4C 00 00 16 Install an Apple Bluetooth Low Energy App called NRF Connect. Scan for the PopTag10. Page. 5 Page. 6 Confirm the PopTag information in the scan is the same as the code written down previously. Code: D8 BF 4C 00 00 16 Page. 7 Operating temperature: -15oC to +65 oC Ingress Protection: IP67 The PopTag transmits its data via Bluetooth Low Energy for example D8 BF 4C 00 00 16 every 5 to 15 seconds continuously. Page. 8 Notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Page. 9 Name and Address of manufacturers:
Inovia Limited Suite C, Lower Road, Garsington, Oxford OX44 9DP, United Kingdom