OPERATING MANUAL FOR POWERCRANK POWER METER This product is ANT+ certified. Visit www.thisisant.com/directory, to display a list of compatible products and applications. ANT + device profile:
1. General information about the POWERCRANK power meter POWERCRANK is a device used to measure the power generated by a cyclist. Data registered and processed by the POWERCRANK device is made available through ANT+
and Bluetooth Smart protocol. The POWERCRANK device is compatible with bicycle computers and mobile devices sup-
porting ANT+ or Bluetooth Smart protocols (a list of com-
patible devices is available on inpeak.pl/en/support_en/). 2. IMPORTANT information for the user 3. Technical data POWERCRANK device should not be washed with pres-
sure washers that generate high pressure water jet. Di-
recting the water jet to the device can damage it. Do not use abrasive detergents to clean the crank with the POWERCRANK power meter, which may cause dam-
age to the housing and electronic system. The battery life may be shorter at low temperatures than when the device is operated in conditions that are close to room temperature. Calibration (see point 6) should be carried out relatively often, especially after changing weather conditions - this will ensure correct indication of the POWERCRANK pow-
er measurement. Calibration should be carried out each time after disassembly and assembly of the device on the bike (screwing to the axis of the crank) and battery re-
placement. Communication:
Power supply:
Battery life:
Measurement accuracy:
Weight:
ANT+, Bluetooth Smart 1 CR2032 battery max 200h 2%
serial weight of the left crank arm +12g IP67 Tightness:
02000W Measuring range:
Cadence range:
20 200 RPM Operating temperature: -5C to +50C Storage temperature:
-20C to +50C 1 5 6 2 3 7 4 4. Device assembly/first start/battery replacement a. Unscrew the cover in accordance with the arrow placed on its front (see photo 1). b. Insert the CR2032 battery into the cover of the POWERCRANK device as illustrated on the cover. c. Make sure the o-ring is in the right place (see photo 2,3). d. Make sure that dirt (mud, water, dust) does not get into the battery compartment if it got, remove it carefully using a soft cloth or a cotton bud. e. Insert the cover into the housing so that the red marks on the housing and the cover coincide (see photo 4). f. Push the cover into the housing and turn the cover against the opening direction (see photo 5). g. Install the left arm in accordance with the manufactur-
ers instructions, tightening it with the strength deter-
mined by the manufacturer. Use a torque wrench for this purpose (see photo 6). h. Mount the pedal. i. After each assembly of the crank or battery replace-
ment, calibrate the device according to point 6. 5. Compatibility of the POWERCRANK device with bicycle computers and other mobile devices POWERCRANK is compatible with bicycle computers and mobile devices supporting ANT+ or Bluetooth Smart proto-
cols. A detailed list of compatible devices can be found on the manufacturers website inpeak.pl/en/support_en/. ANT+ pairing Each POWERCRANK device has its own unique ANT+
number. The number is placed on the crank arm and on the packaging. The number should be entered in the field in-
tended for that in the bicycle computer. A description of this procedure can be found in the bicycle computer manual. Bluetooth Smart pairing Connection with Bluetooth-equipped mobile devices is achieved by activating the Bluetooth function, and then launching a training mobile application that supports the Cycling Power sensor via Bluetooth Smart. A description of this procedure can be found in the manual of the mobile device. 6. Calibration of POWERCRANK device on the bicycle a. Put the bicycle in the driving position (see photo 7). b. Start the device by turning the crank twice back. c. Make sure that the battery is not discharged. d. Position the left crank arm vertically with the ped-
al down (6 oclock) according to Fig. 7 and make sure that no object touches the left arm. The pedal must be screwed to the left arm. e. Pair the bicycle computer with POWERCRANK by entering the ID number placed on the crank or on the packaging in the ANT+ options. f. Run the ZERO OFFSET calibration function on the bicy-
cle computer. g. A message indicating that the calibration has been completed, and the value of the calibration process, which should be in the range of -5 to 5, will appear after a while. This process can take up to several dozen sec-
onds. If this value does not fall within the given range, contact support@inpeak.pl. After the calibration process, the device is ready for cycling. NOTE:
Calibration should be performed relatively frequently, especially after changing the weather conditions this will ensure correct indication of POWERCRANK power meas-
urement. Calibration should be carried out each time after disassembly and assembly of the device and replacement of the battery. 7. Software update 9. Recycling 10. Warranty conditions Software updates are posted on the manufacturers web-
site in the support tab inpeak.pl/en/support_en/. POWER-
CRANK supports the over-the-air (OTA) - wireless software update. More information can be found on the manufactur-
ers website. 8. Cleaning/care of the device For cleaning, use water with mild cleaning agents, e.g. soap, lotion, shampoo for bicycles washing, etc. Do not use pressure washers for POWERCANK device washing (see point 2). etc. Do not use aggressive substances for cleaning - solvents, Protect the environment! Electronic equipment does not belong to household garbage. Use the collection points provided for taking off the electrical equipment and return the equipment which will no longer be used there. Information on where to dispose the used equipment can be obtained at regional municipal offices or in the municipal administration. the Product; damage caused as a result of servicing by non-representatives of Inpeak s.c .; mechanical damage; in the event of removal or obliteration of any POWERCRANK serial number and if Inpeak s.c. will receive information from the competent public authorities that the POWER-
CRANK product is stolen and if the user is unable to prove in any other way that is a legitimate user of the product (e.g. by presenting a proof of purchase). The warranty service for POWERCRANK product may only be carried out by Inpeak s.c. or service provider au-
thorized by Inpeak s.c. After performing the warranty service, the POWER-
CRANK product will be returned to the user in the configu-
ration in which it was originally sold, including the relevant updates. As part of the warranty service, Inpeak s.c. may install software updates in POWERCRANK product, which will require the user to self-update to the latest version of the software provided on the manufacturers website in the tab inpeak.pl/en/support_en/. The date of Inpeak s.c. decision as to the manner of fil-
ing the notification resulting from the warranty is 14 days from the date of POWERCRANK product delivery to the manufacturers service. In the case of unjustified notifi-
cation of the defect, Inpeak s.c. may charge the user with the costs of expertise, tests and transport of equipment. If, under this warranty, the user makes a claim in accord-
ance with this warranty, Inpeak s.c. according to its own discretion:
a. will repair the POWERCRANK product using new parts or previously used parts that are equivalent to new parts in terms of performance and reliability, or b. b. will replace the POWERCRANK product with the same model (or, with the users consent, with a product of sim-
ilar functionality) manufactured of new and/or previously the POWERCRANK product. After the replacement of the product or part or after a refund, all replacement elements become the property of the user, and the elements replaced or those for which the return was made by Inpeak s.c., become the property of In-
peak s.c. If in the performance of obligations under the warranty, Inpeak s.c. will provide the user with a defect-free prod-
uct in exchange for a defective product or will carry out a significant repair of the product covered by this warranty, the warranty period will start again from the moment of delivery of the product free from defects or returning the repaired product to the user. If Inpeak s.c. replace part of the product, then the above provision will apply accordingly Inpeak s.c. with registered office at: ul. Zabrodzka 40/2, 52-336 Wrocaw, makes the warranty on the POWER-
CRANK device in its original packaging (POWERCRANK product), including material defects and performance defects that appear during normal product use in ac-
cordance with the instructions for use, technical data and other published guidelines concerning the POWER-
CRANK Product, for a period of 24 months from the date of the original retail purchase made by the end-user buy-
er (Warranty period). The user may exercise the powers conferred on under this warranty for the POWERCRANK product through the service points indicated by Inpeak s.c. in this document or on the website www.inpeak.pl/en/. In the event of any material defects or manufacturing de-
fects, the user may direct the claims to Inpeak s.c. even if purchased a POWERCRANK product from another re-
tailer, if the warranty period has not yet expired since the date of purchase of the new product. The condition of the warranty is to show the proof of a new product purchase. This warranty does not apply to the non-branded InPEAK s.c. equipment, even in the package or sold with the POW-
ERCRANK product. This warranty does not apply to parts that wear out over time, such as batteries or protective coatings, unless damage occurred as a result of material defects or manufacturing defects; minor damage, includ-
ing scratches, dents or cracks of plastic elements; dam-
age caused by using the product with a third party product that was not delivered with the POWERCRANK product;
damage caused by accident, abuse, improper operation, improper maintenance or improper assembly, fire, flood or other external causes; damage caused by using POWER-
CRANK product in a manner inconsistent with the instruc-
tions for use, technical data or other instructions regarding used parts that are equivalent to new parts in terms of operation and reliability, or c. will refund the purchase price in exchange for returning to the replaced part. In the case of repairs that were not significant, the warranty period is extended by the time when the user could not use the product due to a defect. Under this warranty, the user is only entitled to guar-
antees and legal remedies, as well as other terms clearly specified in it. This warranty does not exclude or limit any rights under consumer law or generally applicable laws. Inpeak s.c. is not liable for damages not attributable to In-
peak s.c. and for lost profits or benefits. In case of users who are entrepreneurs, claims against Inpeak s.c. due to the statutory warranty are excluded. None of the resellers, agents and employees of Inpeak s.c. is authorized to change, extend or supplement this warranty. If any of the provisions is found to be unlawful or unenforceable by law, it will be excluded from this warranty without prejudice to the other provisions. The warranty applies to the countries of the European Union, Switzerland and Norway. 11. Certificates 12. Information about the manufacturer The device uses two standards of wireless data trans-
mission: ANT+ and Bluetooth Smart. The manufacturer issued the EC Declaration of Conformity on the device, marking the product with the CE mark. The POWERCRANK product has been fully designed and manufactured in Poland. Inpeak s.c. ul. Zabrodzka 40/2 52-336 Wrocaw POLAND www.inpeak.pl/en/
inpeak@inpeak.pl NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.