FCC ID: 2AVTI-INPX5000 Indoor Positioning Solution

Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1 User Guide, Inpixon 5000 Dated: June 25, 2020 Product User Guide INPX-DOC-5000-1 Revision 1.1 June 25, 2020 The content of this document is to be treated as strictly confidential and is not to be disclosed, Reproduced or used, except as authorized in writing by Inpixon Copyright 2020 Inpixon Page 1 of 6 Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1 User Guide, Inpixon 5000 Dated: June 25, 2020 Table of Contents 2.1 Table of Contents ........................................................................................................................ 2 1 General Description ........................................................................................................... 3 2 Features .............................................................................................................................. 3 Applications .............................................................................................................................. 3 3 System Description ............................................................................................................ 4 4 Disclaimers ......................................................................................................................... 4 5 Ordering Information ....................................................................................................... 5 6 Certifications ...................................................................................................................... 5 7 References ........................................................................................................................... 6 Contact and Support ................................................................................................................ 6 7.1 The content of this document is to be treated as strictly confidential and is not to be disclosed, Reproduced or used, except as authorized in writing by Inpixon Copyright 2020 Inpixon Page 2 of 6 Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1 User Guide, Inpixon 5000 Dated: June 25, 2020 1 General Description This specification provides general information regarding performance and integration of Inpixon 5000

(INPX-5000), a complete wireless energy-detection and real-time location system (RTLS) solution. The Inpixon 5000 sensors deliver powerful wireless sensing capabilities with performance characteristics superior to any other available wireless sensor in a single form-factor including cellular, Wi-Fi, and Bluetooth. Embedded with the Inpixon UWB Module (INPX-400), the Inpixon 5000 sensor provides Real-time Location System (RTLS) capabilities leveraging Time-Difference of Arrival (TDOA) technology to achieve maximum range and accuracy. Inpixon 5000 is designed to simplify the operational complexity of adding RTLS to indoor infrastructure for the widest range of supported wireless devices. It is completely tested for functionality and performance along with coexistence with other wireless standards. The specification maximum and minimum limits presented herein are to serve as representative performance characteristics of the Inpixon 5000 when properly deployed. Inpixon makes no warranty, implied or otherwise specified, with respect to design and performance characteristics presented in this specification when used in customer designs. The latest revision of this document supersedes all previous versions of this document. Inpixon reserves the right to change this specification without notice. 2 Features Cellular signal detection for different frequency bands (2G, 3G, 4G, LTE) 300-348 MHz, 387-464 MHz, 600-1000 MHz, 1710-1790 MHz, 1850-1990 MHz, 2500-2570 MHz Dual band Wi-Fi signal detection: 802.11a/b/g/n/ac/ (2.4 GHz, 5 GHz) Dual mode Bluetooth signal detection (Bluetooth classic, Bluetooth LE) 2.4 GHz UWB RTLS Supporting 6 UWB bands from 3.5GHz to 6.5GHz Software Compatibility: Inpixon Aware platform TDOA technology for precise real-time location calculations (UWB RTLS) 24VDC Power Input FCC, IC, and CE Certified radio ROHS Compliant IEEE 802.3af/t PoE compliance 2.1 Applications Precision real time location systems (RTLS) for variety of markets: healthcare, retail, industrial, enterprise, and any indoor RTLS needs. Location aware wireless sensor network. The content of this document is to be treated as strictly confidential and is not to be disclosed, Reproduced or used, except as authorized in writing by Inpixon Copyright 2020 Inpixon Page 3 of 6 Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1 User Guide, Inpixon 5000 Dated: June 25, 2020 3 System Description Inpixon 5000 combines Cellular, Wi-Fi, Bluetooth and ultra-wide band (UWB) sensors to provide a broad range of RF device detection. A single board computer (SBC) powers, controls, and communicates with the sensor boards to receive and process detected RF signals. Post-processed data is then communicated with a remote system by way of Ethernet connection. The system is powered by 24VDC or 802.3af/t PoE. The active transmitter UWB integrates the Decawave DW1000 chip and supports 6 ultra-wide band channels (as per IEEE802.15.4-2011) (the firmware limits active transmissions to channel 2 and channel 5). The DW1000 supports UWB standard bit rates of 110 kbps, 850 kbps and 6.81 Mbps and nominal Pulse Repetition Frequencies (PRF) values of 16 MHz and 64 MHz. Cell Sensor SBC i.Mx7 UWB Radio INPX-400 Wi-Fi detection Bluetooth Detection The content of this document is to be treated as strictly confidential and is not to be disclosed, Reproduced or used, except as authorized in writing by Inpixon Copyright 2020 Inpixon Page 4 of 6 Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1 User Guide, Inpixon 5000 Dated: June 25, 2020 4 Disclaimers Inpixon PRODUCTS ARE NOT AUTHORISED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF Inpixon. The definitions used herein are:

a) Life support devices or systems are devices which (1) are intended for surgical implant into the body, or (2) support or sustain life and whose failure to perform when properly used in accordance with the instructions for use provided in the labeling can reasonably be expected to result in a significant injury to the user. b) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Inpixon does not assume responsibility for use of any of the circuitry described, no circuit patent licenses are implied and Inpixon reserves the right at any time to change without notice said circuitry and specifications. 5 Ordering Information The following part numbering scheme is used for this part:

INPX-5000 6 Certifications INPX-5000 conforms to the following certifications. FCC (2AVTI-INPX5000) IC (26211-INPX5000) FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this devise must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could not void the users authority to operate the equipment. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. The content of this document is to be treated as strictly confidential and is not to be disclosed, Reproduced or used, except as authorized in writing by Inpixon Copyright 2020 Inpixon Page 5 of 6 Inpixon Doc No. INPX-DOC-5000-1 Rev.1.1 User Guide, Inpixon 5000 Dated: June 25, 2020 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). ISED statement This device complies with Industry Canadas applicable licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This devise must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : 1) lappareil ne doit pas produire de brouillage; 2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement met une nergie RF trs faible qui est considre comme conforme sans valuation du dbit d absorption spcifique (DAS). The term IC: before the radio certification number only signifies that Industry Canada technical specifications were met. 7 References Inpixon UWB Module (INPX-400) Datasheet IEEE802.15.4-2011 standard 7.1 Contact and Support Inpixon 2479 E. Bayshore Rd, Ste 195 Palo Alto, CA 94303 For support, please visit: https://inpixon.com/support/

The content of this document is to be treated as strictly confidential and is not to be disclosed, Reproduced or used, except as authorized in writing by Inpixon Copyright 2020 Inpixon Page 6 of 6

lnpixon 5000 Label 3"xl.5"

lnpixon 5000 Sensor Indoor Intelligence 111111111111111111111111111 INPX-5000 inpixen SENSOR MODEL:

Input: 24VDC 0.33A 8W ll11111111111111111111111111111111111111111 1111111111111 1111 SERIAL NUMBER:

FCC ID: 2AVTI-INPX5000 ISED ID: 26211-INPX5000 ETHERNET MAC:

5000-1.01-01012020D2 Assembled in USA AA:BB:CC:DD:EE:FF 1111111111111111111111 111111111 11111

Label size: 3" x 1.5" (fits Font: Open Sans (6, 7, 8, l0pt) Barcode Font: Libre Barcode into dogbox) 128 (16pt) FCC ID: Size 7pt

Letter of Authorization To Whom It May Concern:

This letter certifies that Inpixon has engaged the services of GMA LABS LLC to assist Inpixon in filing applications for regulatory approvals on our behalf for the following product:

Trademark / Brand: Inpixon Product Names: Inpixon UWB Module, Inpixon 5000, Inpixon 4400 Model(s): INPX-400, INPX-5000, INPX4400 Please direct any correspondence with Inpixon in all matters relating to the applications for regulatory approvals to GMA Labs LLC. Thank you for your assistance in obtaining the corresponding certifications. Adam Benson CTO 06/04/2020 2479 East Bayshore Road | Suite 195 | Palo Alto | CA 94303 US www.inpixon.com

FCC Agent Authorization Letter Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: __________________ SUBJECT: FCC Application for FCC ID: _______________________________ To Whom It May Concern:

We, the undersigned, hereby authorize _________________________________________ in _____________________________________________ on our behalf, to apply to the Federal Communications Commission for our equipment. Any and all acts carried out by _____________________________________________ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Clients signature: ________________________________ Clients name & title: _____________________________ Contact information / address:

Class II Permissive Change Request Letter Date:

__________________ SUBJECT:

FCC Application for FCC ID:

__________________ To Whom It May Concern:

We are submitting an application for a Class II Permissive Change to the FCC approval of:

name:

Description:

__________________________________________________________________________ ______________________________________________________________________ Company Product ID:

FCC ____________________________________________________________________________________ 08/19/2020____________________________________________________ Original Grant Date:

The transmitter module itself has not changed. Here are the changes:

Sincerely, Clients signature: ________________________________ Clients name & title: _____________________________ Contact information / address:

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ________________ Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Permanent Exhibit Type Type of Confidentiality Requested Short Term Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Operation Description Short Term Parts List/BOM Short Term Schematics Short Term Test Setup Photos Permanent*

Short Term User manual

*Requires further justification before permanent confidentiality will be allowed. Permanent*

Permanent Permanent Permanent The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of ____________ days. Sincerely, Clients signature: ________________________________ Clients name & title: _____________________________ Contact information / address:

FCC Agent Authorization Letter Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-08-18 SUBJECT: FCC Application for FCC ID: _____2AVTI-INPX5000___________ To Whom It May Concern:

We, the undersigned, hereby authorize _____David Zhang__________ in _____Vista Laboratories, Inc.________ on our behalf, to apply to the Federal Communications Commission for our equipment. Any and all acts carried out by ___Vista Laboratories, Inc.________ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Clients signature:

Clients name & title: Amir Tavakoli | Director of Compliance Contact information / address: 7700 Irvine Center Drive#800, Irvine CA92618, USA