www.goldentech.com 1-800-624-6374 401 Bridge Street, Old Forge, PA 18518 Write to: Customer Service Golden Technologies If you need assistance for any reason, please contact us:
No maintenance of this product is required. For service contact your dealer. MAINTENANCE INSTRUCTIONS:
skin in contact with the heated area of the product (if heat function included). manufacturer may be dangerous and void any applicable warranties. sible for fast disconnection in case of emergency. cloth. ice. PRODUCT WITH THIS SUPPLIED DEVICE THE POWER USE ONLY MANUAL TO THIS ACCORDING SYSTEM YOUR OPERATE To reduce the risk of potential serious injury to user:
replacement. WARNING!
ck the dry acces-
for serv-
on, repair or esult in fire, electrical shock or injury and will invalidate void the warranty. Only use the power supply that accompanied this system. the warranty. To reduce the risk of potential product damage:
NOTICE!
instructions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by the equipment. Please save all safety instructions. Please read and follow all safety & warning instructions provided below and on the system before using & connecting to the power source. Failure to comply with safety IMPORTANT SAFETY CONSIDERATIONS WAND 9B HARN BT MODEL 14771-03TI
(GREEN) P3 T S E R D A E H T S E R D A E H 161 20AWG 2W
(BLUE) P4 Ser.XXXXXXX Los Angeles Corporate Office La Verne, CA 91750 PATENT PENDING 8 C BHF P/N: WAND 9B HARN BT REV:NEW BHF P/N: WAND 9B HARN BT ISS#: 14771-03TI 161 20AWG 2W 1 2 FCC ID: S6I-WAND9BHARN Product Name: WAND 9B HARN BT IC: 24144-WAND9BHARN Model: WAND 9B HARN BT This device complies with part 15 of the FCC rules. Operation is subject to the conditions: (1) any interference received, including interference that may cause undesired operation. this device may not cause harmful interference, and (2) this device must following two accept R E B M U L R E B M U L 3 4 8 7 1.5 393T 6.5 10 15 451 20AWG 4W 6 5 BOX SIZE:3 X 6 24AWG 8P 61"
Function detail:
HOME Activates lift System 1)Turn on: press and hold HOME 2)Turn off: release HOME SERIAL LABEL 14771-03TI XYYWW SERIAL LABEL DETAIL 9 4.5
(BLCAK) P5 RECLINE :
Control chair life up and down HEADREST:
Control head up and down LUMBAR:
Control lumbar up and down M1, M2 1)save current lift position 2)Activates life to memory position 41
(13) 24AWG S/B 8P KD ACTUATOR 61"
KD ACTUATOR P1 P2 LIMOSS ACTUATOR P3 FOR LUMBAR P4 FOR HEADREST P55 FOR RECLINE Limited Manufacturers Warranty Patents Pending Copyright 2018 InSeat Solutions, LLC. La Verne, CA MNL-14771-03 0726 3OBTUH2M FCC ID: S6I-WAND9BHARN Product Name: WAND 9B HARN BT IC: 24144-WAND9BHARN Model: WAND 9B HARN BT This device complies with part 15 of the FCC rules. Operation is subject to the conditions: (1) any interference received, including interference that may cause undesired operation. this device may not cause harmful interference, and (2) this device must following two accept label detail OPERATING INSTRUCTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device has been evaluated to meet general RF exposure requirement. le dispositif de a t valus rpondre gnral rf exposition exigence. SAVE THESE INSTRUCTIONS!
Le fabricant n'est pas responsable des toutes interfrences radio ou tlvision causes par des modifications non autorises apportes cet appareil. De telles modifications peuvent empcher lutilisateur dutiliser l'appareil.