LM43 User Manual LM43 User Manual 1 LM43 User Manual Index About this Manual ............................................................................ 3 Product Overview ............................................................................. 3 3.1 Login ............................................................................................................... 4 Configuring the MIFI ....................................................................... 3 3.2 Dashboard ...................................................................................................... 4 3.3 4G .................................................................................................................. 5 3.3.1Setting.......................................................................................................................5 3.3.2APNSettings.............................................................................................................6 3.3.3PINManagement......................................................................................................6 3.4 Status ............................................................................................................. 7 3.4.1WANStatus...............................................................................................................7 3.4.2LANStatus................................................................................................................8 3.4.34GStatus..................................................................................................................8 I3.4.4SoftwareStatus......................................................................................................9 3.5 LAN ................................................................................................................ 9 3.5.1LANSettings............................................................................................................10 3.5.2DeviceList...............................................................................................................12 3.6 System ......................................................................................................... 12 3.6.1Password................................................................................................................13 3.6.2Backup&Restore...................................................................................................13 3.8.3FirmwareUpgrade..................................................................................................13 important information ................................................................ 14 2 1. 2. 3. 4. LM43 User Manual 1. About this Manual The content of this User Manual has been made as accurate as possible. However, due to continual product improvements, specifications and other information are subject to change without notice. LM43 supports LTE Band 2/4/13 (Subject to the configuration of LTE module) and it supports popular operating systems like Windows, Linux and Mac. 2. Product Overview This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to The basic settings in WebGUI consist of seven main parts named Dashboard,4G,Status,LAN and System. You can login to WebGUI as follows, and configure the settings according to your requirements. 3. Configuring the MIFI 3 LM43 User Manual Connect the PC to LM43with USB cable, waiting for about one minute until the device finished initializing. Please ensure that USIM card has been inserted into USIM slot. Open your Web browser and enter 10.0.0.1 in the address bar;
Login window will popup;
When prompted for User name and password, enter the following username and password. 3.1 Login Username/Password: admin/admin 3.2 Dashboard After successful login, the following screen will appear and you will see six menus on the top bar of the WebGUI. The bars in the middle indicate the received signal level, data connection status, USIM status shown as below picture:
LTE signal level Data connection Icon, when MIFI connect to network, the icon is on, otherwise, it is grey USIM card status. If MIFI work without USIM card. The USIM card icon change to Reboot key. It is used to reboot the device Log out key. It is used to log out Web page 4 LM43 User Manual From dashboard page, you can also know 4G status, status, WAN Info, LAN Info, uplink/downlink and Device Info. You can see the dashboard page as figure 322. Figure 3-2-1 Icon Figure 3-2-2 Dashboard Page 3.3 4G 3.3.1 Setting Connection Mode: bridge and router, default mode is bridge Connection Type: Auto and manual, default type is auto 5 LM43 User Manual Figure 3-3-1-1 Setting 3.3.2 APN Settings Figure 3-3-2-1 APN Settings The default APN type is IPV4 and APN is NULL, if you want to configure the LTE APN, you should choose the manual mode, and then you can configure the APN settings From this page, you can see the USIM card status and PIN status. 3.3.3 PIN Management 6 LM43 User Manual Figure 3-3-3-1 PIN Management The default PIN status is disabled; you can input the correct PIN to enable the PIN function. The maximum PIN attempts are 3; otherwise you must enter PUK to reset the PIN code. The USIM will be invalid after the unsuccessful attempts for 10 times. PIN Management: Enter the correct PIN to enable or disable the PIN function, PIN code should be 4 to 8 digits;
On this page, you can see WAN Status, LAN Status, 4G Status and Software Status. 3.4 Status Figure 3-4-1 Status 3.4.1 WAN Status From the WAN Status, WAN IP Address, WAN Primary DNS and WAN Secondary 7 DNS information can be displayed LM43 User Manual Figure 3-4-1-1 WAN Status 3.4.2 LAN Status From this page, you can see the LAN Status such as IP, local net mask, DHCP server and MAC address. Figure 3-4-2-1 WiFi LAN Status 3.4.3 4G Status Clicking on the 4G Status, you can see the LTE information such as Connection Status, USIM Status, IMEI, IMSI, RSSI, and SINR. 8 LM43 User Manual Figure 3-4-3-1 LTE Status I 3.4.4 Software Status Software version and the DTB version can be displayed. Figure 3-4-4-1 Software 3.5 LAN The setting menu consists of two main menus named LAN Settings and Device List. 9 LM43 User Manual Figure 3-5-1 Settings 3.5.1 LAN Settings Clicking on the LAN Settings tab will take you to the LAN Settings header page. On this page, all settings for the internal LAN setup. 10 LM43 User Manual Figure 3-5-1-1 LAN Settings IP Address Enter the IP address of your router (factory default:
192.168.0.1). Subnet Mask An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. DHCP Enable or Disable the DHCP server. If you disable the Server, Client cannot get valid IP address from MIFI automatically. But you can configure the address of your PC manually to connect MIFI Start IP Address Specify an IP address for the DHCP server to start with when assigning IP address. The default start address is 192.168.0.10. End IP Address Specify an IP address for the DHCP Server to end with when assigning IP address. The default end address is 192.168.0.100. Lease Time The Lease Time is the amount of time a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time in minutes and the user will be "leased" this dynamic IP address. After the time is up, the user will be assigned a new dynamic IP address automatically. Static IP IP/MAC binding function, the system will assign a fixed IP address to the MAC according to the rules. Note:
1. If you change the IP Address of LAN, you must use the new IP address to login to the MIFI router. 11 LM43 User Manual 2. If the new LAN IP address you set is not in the same subnet, the IP address pool of the DHCP server will change at the same time, while the Virtual Server and DMZ Host will not take effect until they are reconfigured. You can see the users information, include hostname, MAC address, IP address and connection type. 3.5.2 Device List Figure 3-5-2-1 Device List 3.6 System On this page you can set System Menu: Password, backup&restore, firmware software upgrade. 12 LM43 User Manual 3.6.1 Password The default password is admin, you can enter 1~32 characters for 2 times as your new password. Then you would logout automatically and you should login to the system by the new password. Figure 3-6-1 Password 3.6.2 Backup & Restore Clicking the Export button, the current settings will be saved as a data file to the local PC. You can import the device configuration from the files that you saved. You can restore and reboot the device. Figure 3-6-2-1 Backup & Restore 3.8.3 Firmware Upgrade On this page, you can upgrade the current Router version from the local PC. 13 Please wait until the whole upgrade complete, and then the device will reboot automatically LM43 User Manual Figure 3-6-3-1 Firmware Upgrade 4. important information 4.1 End Product Labeling This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 centimeter may be maintained between the antenna and users. The final end product must be labeled in visible area with the following:
Contains FCC ID: PKRNVWSM4401. 4.2 This device is intended only for OEM integrators under the following conditions:
The SM4401 may transmit simultaneously with other collocated radio transmitters within a host device, provided the following conditions are met:
1. Each collocated radio transmitter has been certified by FCC for mobile application. 2. At least 20 cm separation distance between the antennas of the collocated transmitters and the users body must be maintained at all times. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions cannot be met (for example co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. As long as a condition above is met, further transmitter test will not be required. However, the OEM integrator is still 14 LM43 User Manual responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.) 4.3 Manual Information to the End user The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. 4.4 Antenna Restriction The antenna is designed with unique type RF connector and no consideration of replacement. For mobile and fixed operating configurations the antenna gain, including cable loss, the device, module SM4401 must not exceed the following gain values per bands for B2 1850-1910 MHz , 6.95 dBi gain for B4 1710-1755 MHz, 5.37 dBi gain for B13 777-787 MHz , 11.15 dBi gain 15