FCC ID: PKRISGMD2000 Wireless Module

MD2000 MD2000 Users manual / Integration Guide Version:1.7 May 17, 2021 Legal Disclaimer This document and the information contained in this document (the Information) is provided to you by Inseego Corp. for informational purposes only. Copyright Notice: Restricted Proprietary Information Copyright Inseego Corp. 2020 The information contained in this document is the exclusive property of Inseego Corp. All rights reserved. Unauthorized reproduction of this manual in any form without the expressed written approval of Inseego Corp. is strictly prohibited. This manual may not, in whole or in part, be copied, reproduced, translated, or reduced to any electronic or magnetic storage medium without the written consent of a duly authorized officer of Inseego Corp. The information contained in this document is subject to change without notice and should not be construed as a commitment by Inseego Corp. unless such commitment is expressly given in a covering document. Inseego Corp. makes no warranties, either expressed or implied, regarding this document, its merchantability, or its fitness, for any particular purpose. Printed and produced in United States of America. Regulatory Compliance This section summarizes the responsibilities and actions required of manufacturers and integrators who incorporate OEM versions of the Inseego Corp. MD2000 module device into their products. In certain situations and applications, these products will require additional FCC or other regulatory approvals prior to sale or operation. Appropriate instructions, documentation and labels are required for all products. For more information concerning regulatory requirements, please contact Inseego Corp. FCC CERTIFICATION Inseego Corp. certifies that the MD2000 Radio Module FCC ID: PKRISGMD2000 complies with the RF requirements applicable to broadband PCS equipment operating under the authority of 47 CFR Part 22, Part 24, and Part 27 of the FCC Rules and Regulations. This certification is contingent upon installation, operation and use of the MD2000 module device and its host product in accordance with all instructions provided to both the OEM and end user. When installed and operated in a manner consistent with the instructions provided, the MD2000 module device meets the maximum permissible exposure

(MPE) limits for general population / uncontrolled exposure at defined in Section 1.1310 of the FCC Rules and Regulations. The MD2000 modem device is designed for use in a variety of host units, "enabling" the host platform to perform wireless data communications. However, there are certain criteria relative to integrating the modem into a host platform such as a PC, laptop, hand-held, monitor and control unit, etc. that must be considered to ensure continued compliance with FCC compliance requirements. Important Information for Integrators This section provides guidance for using the MD2000 in host devices through the FCC Permissive Change process. When utilizing the permissive change process, Inseego Corp., the grantee, is responsible for all integrations and must be consulted on all regulatory matters involving the MD2000. The MD2000 module device is granted with FCC modular approval for mobile1 applications, and may be installed as a standalone2 transmitter in final products meeting the following conditions. If the following conditions are followed, it may be used in final products without additional FCC certification. Otherwise, additional FCC approvals must be obtained. The transmitter antenna connected to the MD2000 module device must be installed to provide at least 20cm separation from the human body at all times. The MD2000 module device and transmitter antenna must not be co-located with any other transmitter or antenna within a host device. A label containing the FCC ID must be permanently affixed to the exterior of the host device into which the MD2000 module device is installed. The label may also be under a panel or battery pack if it is readily accessible and cannot be separated from the host device itself. The label must contain a statement similar to the following;

Contains FCC ID: PKRISGMD2000 If any of these conditions are not met, then additional information should be sought from the FCC or an FCC qualified test laboratory. If the MD2000 module device is intended for use in a portable device, the OEM integrator is responsible for approval to satisfy FCC SAR requirements. Refer to FCC OET Bulletin 65 Supplement C for information about FCC RF exposure compliance requirements for mobile and portable devices. The system user manuals and other documentation must clearly indicate operating conditions that must be observed to ensure compliance with FCC RF exposure guidelines and also include appropriate caution and warning statements and information. The host device containing the MD2000 module device may also require compliance to FCC Part 15 Subpart B Unintentional Radiators. FCC NOTICE TO USERS Inseego Corp. has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the device. See 47 CFR Sec. 15.21. The device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If the FCC ID of the module is not visible when installed in the host platform, then a permanently attached or marked label must be displayed on the host unit referring to the module. The label should contain wording such as:

Contains FCC ID: XXXXXXXXX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. ISED CERTIFICATION Innovation, Science and Economic Development Notice (ISED Canada IC: 3229A-MD2000 ISED RSS-Gen Notice This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. 2. This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

Lappareil ne doit pas produire de brouillage. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre 1. 2. le fonctionnement. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-

channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. ISED Canada ICES-003 Compliance CAN ICES-3 (B)/NMB-3(B) A label containing the ISED Certification number must be permanently affixed to the exterior of the host device into which the MD2000 module device is installed. The label may also be under a panel or battery pack if it is readily accessible and cannot be separated from the host device itself. The label must contain a statement similar to the following; Contains IC: 3229A-MD2000 When integrating into a host the transmitter for this device shall be installed at a minimum distance of 20cm from the end user. All Rf exposure requirements shall also be satisfied at the host level. Integration Antenna Gain To ensure continued compliance when integrating this module into host a host device, the maximum antenna gain shall be as listed in table 1. Higher gain antennae shall not be used without reduction/reevaluation of output power at the host level. Table 1 Important Safety Information The following information applies to the devices described in this manual. Always observe all standard and accepted safety precautions and guidelines when handling any electrical device. Save this manual: it contains important safety information and operating instructions. Do not expose the MD2000 product to open flames. Ensure that liquids do not spill onto the devices. Do not attempt to disassemble the product: Doing so will void the warranty. This product does not contain consumer-serviceable components. The MD2000 module device may not be used in an environment where radio frequency equipment is prohibited or restricted in its use. This includes aircrafts, airports, hospitals, and other sensitive electronic areas. Do not operate RF devices in an environment that may be susceptible to radio interference resulting in danger, specifically;

Areas where prohibited by the law. Follow any special rules and regulations and obey all signs and notices. Always turn off the host device when instructed to do so, or when you suspect that it may cause interference or danger. Where explosive atmospheres may be present. Do not operate your modem in any area where a potentially explosive atmosphere may exist. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Be aware of and comply with all signs and instructions. Users are advised not to operate the modem while they are at a refueling point or service station. Users are reminded to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. Potential locations can include gas stations, below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Near Medical and life support equipment. Do not operate your modem in any area where medical equipment, or life support equipment may be located, or near any equipment that may be susceptible to any form of radio interference. In such areas, the host communications device must be turned off. The modem may transmit signals that could interfere with this equipment. On an aircraft, either on the ground or airborne. In addition to FAA requirements, many airline regulations state that you must suspend wireless operations before boarding an airplane. Please ensure that the host device is turned off prior to boarding an aircraft in order to comply with these regulations. The modem can transmit signals that could interfere with various on-

board systems and controls. While operating a vehicle The driver or operator of any vehicle should not operate a wireless data device. Doing so will detract from the driver or operator's control and operation of that vehicle. In some countries, operating such communication devices while in control of a vehicle is an offense. Disclaimer The information and instructions contained within this publication comply with all FCC, GCF, PTCRB, IMEI and other applicable codes that are in effect at the time of publication. Inseego Corp. disclaims all responsibility for any act or omissions, or for breach of law, code or regulation, including local or state codes, performed by a third party. Inseego Corp. strongly recommends that all installations, hookups, transmissions, etc., be performed by persons who are experienced in the fields of radio frequency technologies. Inseego Corp. acknowledges that the installation, setup and transmission guidelines contained within this publication are guidelines, and that each installation may have variables outside of the guidelines contained herein. Said variables must be taken into consideration when installing or using the product, and Inseego Corp. shall not be responsible for installations or transmissions that fall outside of the parameters set forth in this publication. Inseego Corp. shall not be liable for consequential or incidental damages, injury to any person or property, anticipated or lost profits, loss of time, or other losses incurred by Customer or any third party in connection with the installation of the Products or Customer's failure to comply with the information and instructions contained herein. Product Overview This document provides a high-level description of the circuits and their operation that could be used to interface to external device for connectivity:

3G WCDMA for Global Networks. Wi-Fi 2.5 GHz, 5GHz Networks Global Navigation Satellite System GNSS 4G LTE Networks for North American and Global Networks 5G Sub 6 New Radio (NR) Access Technology for North American and Global Networks 1 Interface Overview Below are MD2000 Hardware interface ports to external devices. 1.1 Power Input (30pin connector) MD2000 input power provided thru 30pin connector 1.2 Interfaces to external devices (56pin connector) 1.3 Interfaces MD2000 has 3 types of external interfaces for connection to other devices. Power supply via 30pin connector 56pin connector to support UIM card 1.4 SIM Card supports UIM card interfaces. Support dual voltage operation 1.5 RF Board to Board Connections Interface The RF connectors below are U.FL Connector Note: Bands and Frequencies of operation guaranteed by design and cannot be altered by the end-user.

MD2000 Label and Placement Location 1.0 Product Label:

2.0 Label Location/Placement:

LABEL 9710 Scranton Road Suite 200, San Diego CA 92121, USA Toll Free: 888.888.9231 Main 858.812.3400 Inseego Corp. www.inseego.com

Inseego Corp. 9710 Scranton Road, Suite 200, San Diego, California, United States 92121 Tel: 858-812-3400 ; Fax: 858-812-3406 Federal Communications Commission Office of Engineering and Technology Laboratory Division Date: May 17, 2021 7435 Oakland Mills Rd. Columbia, MD 21046 SUBJECT: Application for Class II Permissive Change for FCC ID: PKRISGMD2000 This is to request a Class II Permissive Change for FCC ID: PKRISGMD2000, original granted on 02/18/2021) The software changes filed under this application are:

(1) Enable operation for Sub-6 bands n7, n38.

(2) Enable ENDC operation of 4A-n41A, 5A-n7A, 5A-n38A, 7A-n5A, 12A-n7A, 12A-n38A, 48C-n66A, 66A-n7A, Except listing above, others remain identical to original granted. Software security and hardware remains 71A-n38A. identical to original. Sincerely, Hadid Jones

Inseego Corp. 9710 Scranton Road, Suite 200, San Diego, California, United States 92121 Tel: 858-812-3400 ; Fax: 858-812-3406 Date: May 19, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: PKRISGMD2000 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Hadid Jones Hadid.jones@inseego.com

Date: September 09, 2020 To whom it may concern, Power of Attorney Please be notified that I, Hadid Jones, have designated Jones Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jones Tsai in Sporton International Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the product of as following:

FCC ID: PKRISGMD2000 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Sincerely yours, Name: Hadid Jones Title: Regulatory Engineering Manager 9710 Scranton Road Suite 200, San Diego CA 92121, USA Toll Free: 888.888.9231 Main 858.812.3400 Inseego Corp. www.inseego.com 10/12/2020

Inseego Corp. 9710 Scranton Road, Suite 200, San Diego, California, United States 92121 Tel: 858-812-3400 ; Fax: 858-812-3406 Federal Communications Commission Office of Engineering and Technology Laboratory Division Date: October 20, 2020 7435 Oakland Mills Rd. Columbia, MD 21046 SUBJECT: Application for Class II Permissive Change for FCC ID: PKRISGMD2000 This is to request a Class II Permissive Change for FCC ID: PKRISGMD2000, original granted on 10/16/2020) The software change filed under this application is:

(1) Enable LTE Carrier Aggregation operation for band 5B, 38C, 41C, 66B, 66C, and 48C.

(2) Enable 5G NR band n5, n41, and n71 operation. Except listing above, others remain identical to original granted. Software security remains identical to original. Hardware remains identical to original. Sincerely, Hadid Jones Hadid.jones@inseego.com

Inseego Corp. 9710 Scranton Road, Suite 200, San Diego, California, United States 92121 Tel: 858-812-3400 ; Fax: 858-812-3406 Date: October 20, 2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: PKRISGMD2000 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Test Setup Photos Best Regards, ______________________ Hadid Jones Hadid.jones@inseego.com

Sporton International Inc. No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Date: October 05, 2020 Power of Attorney To whom it may concern, I hereby authorize Hadid Jones to sign all engineering attestations, cover letters and any other correspondence regarding the FCC/ISED submittal deliverables for the product bearing:

FCC ID: PKRISGMD2000 IC: 3229A-MD2000 Sincerely yours, Name: Roman Olmos Title: Regulatory Engineer 9710 Scranton Road Suite 200, San Diego CA 92121, USA Toll Free: 888.888.9231 Main 858.812.3400 Inseego Corp. www.inseego.com

Inseego Corp. 9710 Scranton Road, Suite 200, San Diego, California, United States 92121 Tel: 858-812-3400 ; Fax: 858-812-3406 Date: October 15, 2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: PKRISGMD2000 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Schematic Diagram Block Diagram Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________ Hadid Jones Hadid.jones@inseego.com

Inseego Corp. 9710 Scranton Road, Suite 200, San Diego, California, United States 92121 Tel: 858-812-3400 ; Fax: 858-812-3406 Date: October 5, 2020 Module Approval Checklist FCC ID: PKRISGMD2000 Item Requirements EUT 1. The radio elements must have the radio frequency The module is equipped with its own shielding case. 2. The module must have buffered modulation/data The module has buffer modulation / data inputs. 3. The module must contain power supply regulation The module has its own power supply regulation. 4. The module must contain a permanently attached The module contains a unique antenna connector. circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly inputs to ensure that the device will comply with Part 15 requirements with any type of input signal on the module antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) 5. The module must demonstrate compliance in a The module was tested on evaluation board, and its not stand-alone configuration inside of another device during testing 6. The module must be labeled with its permanently The module transmitter will be labeled with its own FCC ID, affixed FCC ID label, or use an electronic display and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The module must comply with all specific rules The module approved transmitter complies with all applicable applicable to the transmitter, including all the rules and the integration manual contains any specific conditions provided in the integration instructions by requirements addressed to the integrator and/or to the 8. The module must comply with RF exposure The modular transmitter complies with RF exposure the grantee requirements end-user of the final end-product. requirement. ______________________ Hadid Jones hadid.jones@inseego.com Date 10/12/2020

Date: October 6, 2020 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: PKRISGMD2000 Attestation for FCC Part 15B Suppliers Declaration of Conformity Please be notified that we, the undersigned, Inseego Corp. declares that the product, which bears the above FCC ID is compliant with the FCC Part 15B requirements for SDoC. The SDoC procedure shall be carried out prior to marketing the device in the US. Sincerely, Hadid Jones Regulatory Engineering Manager Inseego Corp. 9710 Scranton Road Suite 200, San Diego CA 92121, USA Toll Free: 888.888.9231 Main 858.812.3400 www.inseego.com