Cnct | intelliPLUG Quick Start Guide app.cnct.com Cnct-Quick-Guide_v2-.indd2 2017/4/21 10:25:56 Quick Start Guide Cnct-Quick-Guide_v2-.indd3 2017/4/21 10:25:56 Get To Know Your intelliPLUG Compact Design Actual Size Wi-Fi Enabled Power Button Control Appliances and Devices with App Compatible with Standard Outlet Electrical Ratings AC 120V, 60 Hz 15A 1800 W For general use only Cnct-Quick-Guide_v2-.indd4 2017/4/21 10:25:56 Quick Start Guide 1. Download the Cnct app. Go to http://app.cnct.com to install the free Cnct app for your phone or tablet. Once installed, follow the steps to setup your Cnct account. 2. Ensure your phone (or tablet) and intelliPLUG are connected to the same Wi-Fi network Must be a 2.4 GHz Wi-Fi network 3. Plug in your intelliPLUG. Once plugged in, the power button will begin ashing a blue light; indicating it is ready for setup. From the Cnct app, click the icon in the upper right hand corner, select the intelliPLUG device, enter your Wi-Fi password, and begin setup. Once setup is complete, the blue light will stop ashing and you will be prompted to create a name for your intelliPLUG. If the setup fails, reset the intelliPLUG and go through the setup process again
(see below). How To Reset intelliPLUG When plugged in, press and hold the power button on the side of your intelliPLUG for 4 seconds until the blue light begins ashing. Use the Cnct app to recongure the network settings. Safety Warnings:
Plug directly into electrical outlet
(Do not use an extension cord) For indoor use only Remove intelliPLUG from outlet before cleaning Do not clean with liquid Do not remove ground pin (middle pin) Do not use in wet or damp areas Keep children away from intelliPLUG and outlet Do not exceed the recommended electrical ratings Do not use in precision timing applications where inaccurate timing could be dangerous
(Example: sunlamps, saunas, etc.) Do not use with devices that should not be operated without supervision Cnct-Quick-Guide_v2-.indd5 2017/4/21 10:25:56 Operating conditions:For in door use only Electrical ratings Complete Declar.
(i.e. 1.C.L, etc.) Type 1.B, Operating Model No. Volt. intelliPLUG 120 V, 60Hz Output 15 A 15 A 600 W 500 VA 1/2 hp Load Type Resistive General Use Tungsten Electronic Ballast Horse Power Operating ambient temperature0~40 3. Type of Action:Type of 1.B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps.