submitted / available | |||||||
---|---|---|---|---|---|---|---|
Users Manual | December 27 2022 / July 05 2023 | delayed release | |||||
Users Manual | July 07 2022 / August 24 2022 | ||||||
|
Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 | Users Manual | 2.61 MiB | August 11 2022 / August 24 2022 | |||
|
TempConfidential 11 EN Intel WiFi Adapter Information Guide Draft Rev05 | Users Manual | 3.40 MiB | September 07 2023 / April 16 2024 | delayed release | ||
|
UM Generic Safety and Compliance Notice | Users Manual | 5.00 MiB | April 18 2022 / October 16 2022 | delayed release | ||
|
UM RN | Users Manual | 1.43 MiB | April 17 2022 / October 16 2022 | delayed release | ||
|
UM UG | Users Manual | 4.47 MiB | April 17 2022 / October 16 2022 | delayed release | ||
|
User Manual | Users Manual | 1.57 MiB | April 13 2023 / October 11 2023 | delayed release | ||
|
User Manual Regulatory | Users Manual | 1.68 MiB | September 15 2022 / March 25 2023 | delayed release | ||
Internal Photos | September 07 2023 / October 19 2023 | ||||||
|
Internal Photos Antennas | Internal Photos | 87.68 KiB | July 07 2022 / August 24 2022 | |||
|
TP00137A internal photo | Internal Photos | 331.73 KiB | April 17 2022 / October 16 2022 | delayed release | ||
ID Label/Location Info | April 13 2023 | ||||||
|
Labels and Locations | ID Label/Location Info | 71.57 KiB | February 08 2023 | |||
|
TP00137A FCC E-Label Info AX201D2W | ID Label/Location Info | 609.48 KiB | April 17 2022 / April 19 2022 | |||
|
220915-10.TR02-FCC MPE WLAN UNII4 AX201D2W Rev01 | RF Exposure Info | 375.14 KiB | September 07 2023 / October 19 2023 | |||
|
220915-10.TR05-FCC RSE WLAN UNII4 AX201D2W Rev01 | Test Report | 472.13 KiB | September 07 2023 / October 19 2023 | |||
|
220915-10.TR05-FCC RSE WLAN UNII4 AX201D2W Rev01 Photographs | Test Setup Photos | 532.67 KiB | September 07 2023 / October 19 2023 | |||
Attestation Statements | September 07 2023 / October 19 2023 | ||||||
Attestation Statements | September 07 2023 / October 19 2023 | ||||||
Test Report | September 20 2023 / October 19 2023 | ||||||
Test Report | October 02 2023 / October 19 2023 | ||||||
|
Dipole Antenna report ARY121-0009-002-H0 20231011 Rev04 | Test Report | 2.43 MiB | October 12 2023 / October 19 2023 | |||
Test Report | September 07 2023 / October 19 2023 | ||||||
|
FCC Confidentiality Letter | Cover Letter(s) | 277.91 KiB | September 07 2023 / October 19 2023 | |||
|
FCC Modular Approval Letter | Cover Letter(s) | 1.04 MiB | September 07 2023 / October 19 2023 | |||
|
Premissive Change Letter | Cover Letter(s) | 1.01 MiB | September 07 2023 / October 19 2023 | |||
Attestation Statements | April 13 2023 | ||||||
Attestation Statements | April 13 2023 | ||||||
|
FCC Agent for Service of Process Intel - BL-RP July 24 2023 | Attestation Statements | 83.76 KiB | October 02 2023 / April 13 2023 | |||
Cover Letter(s) | April 13 2023 | ||||||
Cover Letter(s) | April 13 2023 | ||||||
RF Exposure Info | April 13 2023 | ||||||
|
RF Exposure SAR Report TR01 | RF Exposure Info | 985.50 KiB | April 13 2023 | |||
Test Report | April 13 2023 | ||||||
Test Report | April 13 2023 | ||||||
|
Test Setup Photos Antenna Data Hong Bo TB | Test Setup Photos | 2.33 MiB | April 13 2023 / October 11 2023 | delayed release | ||
|
Test Setup Photos Hong Bo Antenna | Test Setup Photos | 2.45 MiB | April 13 2023 / October 11 2023 | delayed release | ||
|
Test Setup Photos SAR TR01 | Test Setup Photos | 659.27 KiB | April 13 2023 / October 11 2023 | delayed release | ||
|
Attestation Letter Agent Letter for Service Rev 02 | Attestation Statements | 132.60 KiB | March 08 2023 / February 08 2023 | |||
Operational Description Antenna Schema | Operational Description | February 08 2023 | confidential | ||||
|
RF Exposure MPE Report AWAN | RF Exposure Info | 327.59 KiB | February 08 2023 | |||
|
RF Exposure MPE Report Hong Bo | RF Exposure Info | 327.45 KiB | February 08 2023 | |||
|
Test Report Antenna Data Awan | Test Report | 1.40 MiB | February 08 2023 | |||
|
Test Report Antenna Data Hong Bo | Test Report | 2.24 MiB | February 08 2023 | |||
|
Test Report RSE TR05 | Test Report | 533.91 KiB | February 08 2023 | |||
|
Test Setup Photos RSE TR05 | Test Setup Photos | 394.87 KiB | February 08 2023 | |||
RF Exposure Info | December 27 2022 / January 06 2023 | ||||||
Test Setup Photos | December 27 2022 / July 05 2023 | delayed release | |||||
RF Exposure Info | December 27 2022 / January 06 2023 | ||||||
|
220817-01.TR02-FCC-IC WLAN G-Sensor Dell P33T AX201D2W. Rev.01 | Test Report | 319.97 KiB | December 20 2022 / January 06 2023 | |||
Cover Letter(s) | November 22 2022 / January 06 2023 | ||||||
Description G-Sensor | Operational Description | November 22 2022 | confidential | ||||
Cover Letter(s) | November 22 2022 / January 06 2023 | ||||||
Test Report | November 22 2022 / January 06 2023 | ||||||
Test Report | November 22 2022 / January 06 2023 | ||||||
Test Report | November 22 2022 / January 06 2023 | ||||||
Test Setup Photos | November 22 2022 / July 05 2023 | delayed release | |||||
Test Setup Photos | November 22 2022 / July 05 2023 | delayed release | |||||
|
RF Exposure SAR Report | RF Exposure Info | 1.42 MiB | September 15 2022 / September 26 2022 | |||
|
Test Setup Photos Antenna Data | Test Setup Photos | 2.64 MiB | November 22 2022 / July 05 2023 | delayed release | ||
|
Test Setup Photos SAR | Test Setup Photos | 562.51 KiB | December 20 2022 | |||
Test Report | December 27 2022 / January 06 2023 | ||||||
Test Report | December 27 2022 / January 06 2023 | ||||||
Attestation Statements | November 22 2022 / January 06 2023 | ||||||
RF Exposure Info | May 16 2022 / May 19 2022 | ||||||
Test Report | November 22 2022 / January 06 2023 | ||||||
|
Modular Letter | Cover Letter(s) | 288.07 KiB | December 20 2022 | |||
|
RF Exposure SAR | RF Exposure Info | 1.05 MiB | December 20 2022 | |||
|
RF Exposure SAR Calibrations | RF Exposure Info | 2.69 MiB | December 20 2022 | |||
|
Test Report Antenna Data | Test Report | 362.18 KiB | December 20 2022 | |||
|
Test Report Antenna StarCross | Test Report | 718.04 KiB | December 20 2022 | |||
|
DPCSA Declaration | Cover Letter(s) | 165.91 KiB | September 15 2022 / September 26 2022 | |||
Description Antenna Dynamic Power Control | Operational Description | September 15 2022 | confidential | ||||
|
Premissive Change letter Rev 03 | Cover Letter(s) | 284.51 KiB | October 10 2022 / September 26 2022 | |||
|
RF Exposure SAR Calibration | RF Exposure Info | 3.94 MiB | September 15 2022 / September 26 2022 | |||
|
Test Report TAS Compliance | Test Report | 439.38 KiB | September 15 2022 / September 26 2022 | |||
|
210209-01.TR34 - FCC, UNII4 RF, AX201D2W Rev01 - Photographs | Test Setup Photos | 869.66 KiB | July 07 2022 / August 24 2022 | |||
|
210209-01.TR34 - FCC, UNII4 RF, AX201D2W Rev01 Part1 | Test Report | 4.21 MiB | July 07 2022 / August 24 2022 | |||
|
210209-01.TR34 - FCC, UNII4 RF, AX201D2W Rev01 Part2 | Test Report | 4.93 MiB | July 07 2022 / August 24 2022 | |||
|
210209-01.TR35 FCC UNII-4 SAR AX201D2W Rev02 | RF Exposure Info | 1.04 MiB | July 07 2022 / August 24 2022 | |||
|
210209-01.TR35 FCC UNII-4 SAR AX201D2W Rev02 Annex E | RF Exposure Info | 1.63 MiB | July 07 2022 / August 24 2022 | |||
|
210209-01.TR35 FCC UNII-4 SAR AX201D2W Rev02 Annex F | Test Setup Photos | 611.40 KiB | July 07 2022 / August 24 2022 | |||
|
FCC - C2PC letter AX201D2W | Cover Letter(s) | 273.55 KiB | July 07 2022 / August 24 2022 | |||
|
Passive-Scan-Attestation-AX201D2W Rev03 | Attestation Statements | 223.12 KiB | July 07 2022 / August 24 2022 | |||
|
Software-Security-Letter AX201D2W | Attestation Statements | 963.47 KiB | July 07 2022 / August 24 2022 | |||
Description Antenna Inpaq NB | Operational Description | June 01 2022 | confidential | ||||
Description Antenna Inpaq TB | Operational Description | June 01 2022 | confidential | ||||
|
FCC Inquiry TN484595 | Cover Letter(s) | 138.32 KiB | June 01 2022 | |||
|
Test Report Smart Switch | Test Report | 316.90 KiB | June 01 2022 | |||
Cover Letter(s) | May 16 2022 / May 19 2022 | ||||||
Description Antenna WNC | Operational Description | May 16 2022 | confidential | ||||
|
AX201D2W FCC SAR | RF Exposure Info | 1.55 MiB | April 17 2022 / April 19 2022 | |||
|
AX201D2W FCC SAR A | RF Exposure Info | 806.80 KiB | April 17 2022 / April 19 2022 | |||
|
AX201D2W FCC SAR B | RF Exposure Info | 482.89 KiB | April 17 2022 / April 19 2022 | |||
|
AX201D2W FCC SAR C 1 | RF Exposure Info | 3.19 MiB | April 17 2022 / April 19 2022 | |||
|
AX201D2W FCC SAR C 2 | RF Exposure Info | 5.58 MiB | April 17 2022 / April 19 2022 | |||
|
AX201D2W Tsup | Test Setup Photos | 378.24 KiB | April 17 2022 / October 16 2022 | delayed release | ||
|
FCC C2PC letter AX201D2W Rev01 | Cover Letter(s) | 249.82 KiB | April 17 2022 / April 19 2022 | |||
|
FCC Confidentiality Request Rev01 | Cover Letter(s) | 601.24 KiB | April 17 2022 / April 19 2022 | |||
|
FCC Modular-Letter | Cover Letter(s) | 664.29 KiB | April 17 2022 / April 19 2022 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-10-19 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2023-04-13 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 2023-02-08 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
7 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
8 | 2023-01-06 | 2422 ~ 2462 | DTS - Digital Transmission System | |
9 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
10 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
11 | 2022-12-20 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | |
12 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | ||
13 | 2022-09-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
14 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
15 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
16 | 2022-08-24 | 5855 ~ 5855 | NII - Unlicensed National Information Infrastructure TX | |
17 | 2022-06-01 | 2422 ~ 2462 | DTS - Digital Transmission System | |
18 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
19 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
20 | 2022-05-19 | 2422 ~ 2462 | DTS - Digital Transmission System | |
21 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
22 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
23 | 2022-04-19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
24 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
25 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
26 | 2022-03-30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
27 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
28 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
29 | 2022-02-03 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
30 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
31 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
32 | 2022-01-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
33 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
34 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
35 | 2022-01-21 | 2422 ~ 2462 | DTS - Digital Transmission System | |
36 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
37 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
38 | 2021-12-03 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
39 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change | |
40 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
41 | 2021-10-13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
42 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
43 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
44 | 2021-10-11 | 2422 ~ 2462 | DTS - Digital Transmission System | |
45 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
46 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
47 | 2021-08-23 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
48 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
49 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
50 | 2021-07-27 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
51 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
52 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
53 | 2021-07-23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
54 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
55 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
56 | 2021-07-14 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
57 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
58 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
59 | 2021-07-12 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
60 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
61 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
62 | 2021-06-24 | 2422 ~ 2462 | DTS - Digital Transmission System | |
63 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
64 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
65 | 2021-05-17 | 2422 ~ 2462 | DTS - Digital Transmission System | |
66 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
67 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
68 | 2021-04-23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
69 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
70 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
71 | 2021-03-03 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
72 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
73 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
74 | 2021-02-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
75 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
76 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
77 | 2021-02-24 | 2422 ~ 2462 | DTS - Digital Transmission System | |
78 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
79 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
80 | 2021-02-23 | 2422 ~ 2462 | DTS - Digital Transmission System | |
81 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
82 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
83 | 2021-02-18 | 2422 ~ 2462 | DTS - Digital Transmission System | |
84 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
85 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
86 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
87 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
88 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
89 | 2021-02-01 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
90 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
91 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
92 | 2021-01-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
93 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
94 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
95 | 2020-12-21 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
96 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
97 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
98 | 2020-12-18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
99 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
100 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
101 | 2020-12-15 | 2422 ~ 2462 | DTS - Digital Transmission System | |
102 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
103 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
104 | 2020-12-07 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
105 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
106 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
107 | 2020-12-04 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
108 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
109 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
110 | 2020-12-02 | 2422 ~ 2462 | DTS - Digital Transmission System | |
111 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
112 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
113 | 2020-11-24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
114 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
115 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
116 | 2020-11-23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
117 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
118 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
119 | 2020-11-20 | 2422 ~ 2462 | DTS - Digital Transmission System | |
120 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
121 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
122 | 2020-11-19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
123 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
124 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
125 | 2020-11-18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
126 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
127 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
128 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
129 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
130 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
131 | 2020-11-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
132 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
133 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
134 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
135 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
136 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
137 | 2020-11-16 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
138 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
139 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
140 | 2020-09-24 | 2422 ~ 2462 | DTS - Digital Transmission System | |
141 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
142 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
143 | 2020-09-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
144 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
145 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
146 | 2020-09-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
147 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
148 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
149 | 2020-08-27 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
150 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
151 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
152 | 2020-08-26 | 2422 ~ 2462 | DTS - Digital Transmission System | |
153 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
154 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
155 | 2020-08-06 | 2422 ~ 2462 | DTS - Digital Transmission System | |
156 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
157 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
158 | 2020-06-30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
159 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
160 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
161 | 2020-06-18 | 2422 ~ 2462 | DTS - Digital Transmission System | |
162 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
163 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
164 | 2020-06-09 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
165 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
166 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
167 | 2020-06-02 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
168 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
169 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
170 | 2020-06-01 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
171 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
172 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
173 | 2020-05-29 | 2422 ~ 2462 | DTS - Digital Transmission System | |
174 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
175 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
176 | 2020-05-14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
177 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
178 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
179 | 2020-05-13 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
180 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
181 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
182 | 2020-05-12 | 2422 ~ 2462 | DTS - Digital Transmission System | |
183 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
184 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
185 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
186 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
187 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
188 | 2020-05-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
189 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
190 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
191 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
192 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
193 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
194 | 2020-05-04 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
195 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
196 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
197 | 2020-04-21 | 2422 ~ 2462 | DTS - Digital Transmission System | |
198 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
199 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
200 | 2020-04-07 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
201 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
202 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
203 | 2020-03-26 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
204 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
205 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
206 | 2020-03-04 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
207 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
208 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
209 | 2020-03-02 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
210 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
211 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
212 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
213 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
214 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
215 | 2020-02-28 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
216 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
217 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
218 | 2020-02-06 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
219 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
220 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
221 | 2020-01-23 | 2422 ~ 2462 | DTS - Digital Transmission System | |
222 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
223 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
224 | 2020-01-14 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
225 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
226 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
227 | 2019-11-07 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
228 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
229 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
230 | 2019-11-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
231 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
232 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
233 | 2019-11-01 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
234 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
235 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
236 | 2019-10-30 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
237 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
238 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
239 | 2019-08-26 | 2422 ~ 2462 | DTS - Digital Transmission System | |
240 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
241 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
242 | 2019-08-16 | 2422 ~ 2462 | DTS - Digital Transmission System | |
243 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
244 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
245 | 2019-06-28 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
246 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
247 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
248 | 2019-06-11 | 5720 ~ 5720 | NII - Unlicensed National Information Infrastructure TX | |
249 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
250 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
251 | 2019-06-07 | 2412 ~ 2472 | DTS - Digital Transmission System | |
252 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
253 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
254 | 2018-11-20 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
255 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
256 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
257 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2023-10-19
|
|||||
2023-04-13
|
||||||
2023-02-08
|
||||||
2023-01-06
|
||||||
2022-12-20
|
||||||
2022-09-26
|
||||||
2022-08-24
|
||||||
2022-06-01
|
||||||
2022-05-19
|
||||||
2022-04-19
|
||||||
2022-03-30
|
||||||
2022-02-03
|
||||||
2022-01-25
|
||||||
2022-01-21
|
||||||
2021-12-03
|
||||||
2021-10-13
|
||||||
2021-10-11
|
||||||
2021-08-23
|
||||||
2021-07-27
|
||||||
2021-07-23
|
||||||
2021-07-14
|
||||||
2021-07-12
|
||||||
2021-06-24
|
||||||
2021-05-17
|
||||||
2021-04-23
|
||||||
2021-03-03
|
||||||
2021-02-26
|
||||||
2021-02-24
|
||||||
2021-02-23
|
||||||
2021-02-18
|
||||||
2021-02-01
|
||||||
2021-01-25
|
||||||
2020-12-21
|
||||||
2020-12-18
|
||||||
2020-12-15
|
||||||
2020-12-07
|
||||||
2020-12-04
|
||||||
2020-12-02
|
||||||
2020-11-24
|
||||||
2020-11-23
|
||||||
2020-11-20
|
||||||
2020-11-19
|
||||||
2020-11-18
|
||||||
2020-11-17
|
||||||
2020-11-16
|
||||||
2020-09-24
|
||||||
2020-09-17
|
||||||
2020-09-15
|
||||||
2020-08-27
|
||||||
2020-08-26
|
||||||
2020-08-06
|
||||||
2020-06-30
|
||||||
2020-06-18
|
||||||
2020-06-09
|
||||||
2020-06-02
|
||||||
2020-06-01
|
||||||
2020-05-29
|
||||||
2020-05-14
|
||||||
2020-05-13
|
||||||
2020-05-12
|
||||||
2020-05-06
|
||||||
2020-05-04
|
||||||
2020-04-21
|
||||||
2020-04-07
|
||||||
2020-03-26
|
||||||
2020-03-04
|
||||||
2020-03-02
|
||||||
2020-02-28
|
||||||
2020-02-06
|
||||||
2020-01-23
|
||||||
2020-01-14
|
||||||
2019-11-07
|
||||||
2019-11-06
|
||||||
2019-11-01
|
||||||
2019-10-30
|
||||||
2019-08-26
|
||||||
2019-08-16
|
||||||
2019-06-28
|
||||||
2019-06-11
|
||||||
2019-06-07
|
||||||
2018-11-20
|
||||||
Applicant's complete, legal business name |
Intel Corporation
|
|||||
FCC Registration Number (FRN) |
0033159344
|
|||||
0008035131
|
||||||
Physical Address |
425 rue de Goa Le Cargo B6
|
|||||
100 Center Point Circle Suite 200
|
||||||
425 rue de Goa
|
||||||
100 Center Point Circle
|
||||||
Antibes, N/A
|
||||||
Columbia, South Carolina 29210
|
||||||
Columbia, SC
|
||||||
Columbia
|
||||||
Columbia, 29210
|
||||||
France
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
h******@acbcert.com
|
|||||
K******@sporton-usa.com
|
||||||
h******@ACBcert.com
|
||||||
h******@atcbcert.com
|
||||||
H******@acbcert.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
PD9
|
|||||
Equipment Product Code |
AX201D2
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
B******** L********
|
|||||
S****** C******** H********
|
||||||
Title |
Regulatory Engineer
|
|||||
Product Regulations Engineer
|
||||||
Telephone Number |
04930********
|
|||||
803-3********
|
||||||
Fax Number |
04930********
|
|||||
803-2********
|
||||||
b******@intel.com
|
||||||
s******@intel.com
|
||||||
Technical Contact | ||||||
Firm Name |
Intel Corporation
|
|||||
Intel Mobile Communications
|
||||||
Dekra Testing
|
||||||
RF Exposure Lab
|
||||||
RF Expsoure Lab
|
||||||
Name |
B******** L********
|
|||||
S******** C****** H********
|
||||||
S**** H******
|
||||||
S**** H******
|
||||||
F****** Y****
|
||||||
J**** M******
|
||||||
j**** M****
|
||||||
s**** H****
|
||||||
Physical Address |
425 rue de Goa
|
|||||
100 Center Point Circle
|
||||||
100 Center Point Circle Suite 200
|
||||||
100 center Point Circle
|
||||||
No. 5-22 Ruishukeng, Linkou Dist.
|
||||||
No. 5-22, Ruishukeng, Linkou Dist.
|
||||||
802 N. Twin Oaks Valley Road, Suite 105
|
||||||
Antibes, 06600
|
||||||
Columbia, 29212
|
||||||
Columbia, 29210
|
||||||
Columbia, South Carolina 29210
|
||||||
New Taipei City, 24451
|
||||||
San Marcos, 92069
|
||||||
San Marcos, California 92069
|
||||||
San Marcos, Virginia 92069
|
||||||
San Marcos, South Carolina 92069
|
||||||
Columbia, Virginia 29210
|
||||||
France
|
||||||
United States
|
||||||
Taiwan
|
||||||
Telephone Number |
04930********
|
|||||
80321********
|
||||||
80331********
|
||||||
88628******** Extension:
|
||||||
76047********
|
||||||
+7604********
|
||||||
+1760********
|
||||||
+1803********
|
||||||
b******@intel.com
|
||||||
s******@intel.com
|
||||||
f******@dekra.com
|
||||||
i******@rfexposurelab.com
|
||||||
s******@Intel.com
|
||||||
S******@intel.com
|
||||||
Non Technical Contact | ||||||
Firm Name |
Intel Corporation
|
|||||
Name |
B**** L********
|
|||||
G****** C******
|
||||||
b******** L******
|
||||||
Physical Address |
425 rue de Goa
|
|||||
Antibes, 06600
|
||||||
France
|
||||||
Telephone Number |
04930********
|
|||||
+3349********
|
||||||
b******@intel.com
|
||||||
g******@intel.com
|
||||||
B******@intel.com
|
||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/16/2024 | |||||
10/11/2023 | ||||||
07/05/2023 | ||||||
03/25/2023 | ||||||
11/15/2022 | ||||||
10/16/2022 | ||||||
09/26/2022 | ||||||
08/02/2022 | ||||||
07/23/2022 | ||||||
07/20/2022 | ||||||
06/01/2022 | ||||||
04/11/2022 | ||||||
04/09/2022 | ||||||
02/19/2022 | ||||||
01/23/2022 | ||||||
01/18/2022 | ||||||
01/10/2022 | ||||||
01/08/2022 | ||||||
12/12/2021 | ||||||
11/13/2021 | ||||||
10/20/2021 | ||||||
08/30/2021 | ||||||
08/25/2021 | ||||||
08/23/2021 | ||||||
08/22/2021 | ||||||
08/17/2021 | ||||||
07/31/2021 | ||||||
07/24/2021 | ||||||
06/19/2021 | ||||||
06/16/2021 | ||||||
06/13/2021 | ||||||
06/05/2021 | ||||||
06/02/2021 | ||||||
05/31/2021 | ||||||
05/23/2021 | ||||||
05/22/2021 | ||||||
05/19/2021 | ||||||
05/18/2021 | ||||||
05/17/2021 | ||||||
05/16/2021 | ||||||
05/15/2021 | ||||||
03/16/2021 | ||||||
03/14/2021 | ||||||
02/23/2021 | ||||||
02/22/2021 | ||||||
02/02/2021 | ||||||
12/27/2020 | ||||||
12/15/2020 | ||||||
12/06/2020 | ||||||
11/29/2020 | ||||||
11/28/2020 | ||||||
11/25/2020 | ||||||
11/10/2020 | ||||||
11/09/2020 | ||||||
11/08/2020 | ||||||
11/02/2020 | ||||||
10/31/2020 | ||||||
10/18/2020 | ||||||
10/04/2020 | ||||||
09/22/2020 | ||||||
08/31/2020 | ||||||
08/26/2020 | ||||||
08/29/2020 | ||||||
08/04/2020 | ||||||
07/21/2020 | ||||||
07/12/2020 | ||||||
05/05/2020 | ||||||
05/04/2020 | ||||||
04/28/2020 | ||||||
04/29/2020 | ||||||
04/27/2020 | ||||||
02/22/2020 | ||||||
02/11/2020 | ||||||
12/25/2019 | ||||||
12/08/2019 | ||||||
12/04/2019 | ||||||
05/19/2019 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | NII - Unlicensed National Information Infrastructure TX | |||||
DTS - Digital Transmission System | ||||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6 AX201 | |||||
Intel Wireless AX201 | ||||||
Intel Wireless AX-201 | ||||||
Intel Wireless - AX201 | ||||||
Intel Wireless -AX201 | ||||||
Intel WiFi 6 AX201 | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | |||||
No | ||||||
Modular Equipment Type | Single Modular Approval | |||||
Limited Single Modular Approval | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Class II permissive change or modification of presently authorized equipment | ||||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0). | |||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to add a new antenna for a monopole type (AWAN DQ60AYF0006 and HongBo DQ602377800 ) and Loop type (AWAN DQ60AYF0006 and HongBo DQ602377800). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is to add a new antenna for a monopole type (AWAN DQ60AYF0006 and 2 HongBo DQ602377800 ) and Loop type (AWAN DQ60AYF0006 and HongBo DQ602377800). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including 3 simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to add a new antenna for a monopole type (AWAN DQ60AYF0006 and HongBo DQ602377800 ) and Loop type (AWAN DQ60AYF0006 and HongBo DQ602377800). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P33T convertible PC with Hong-BO 260-24347 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.37W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.98W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSC-I006R PC with WNC 6036B0324301 and 6036B0324101 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSC-I006R PC with WNC 6036B0324301 and 6036B0324101 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the HP model HSC-I006R PC with WNC 6036B0324301 and 6036B0324101 antennas. TAS feature is enabled. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.32W/kg respectively. This device has been previously approved on 06/08/2020 as HP model HSN-C05C. No Hardware changes have been made. Only ISH driver will be enabled to support the virtual sensor for dynamic SAR Control as previously discussed with the FCC as shown in the KDB provided with this filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.32W/kg respectively. This device has been previously approved on 06/08/2020 as HP model HSN-C05C. No Hardware changes have been made. Only ISH driver will be enabled to support the virtual sensor for dynamic SAR Control as previously discussed with the FCC as shown in the KDB provided with this filing. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.32W/kg respectively. This device has been previously approved on 06/08/2020 as HP model HSN-C05C. No Hardware changes have been made. Only ISH driver will be enabled to support the virtual sensor for dynamic SAR Control as previously discussed with the FCC as shown in the KDB provided with this filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.01W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP554XED, NP550XEZ PC with WNC BA42-00750A and BA42-00751A antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.01W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP554XED, NP550XEZ PC with WNC BA42-00750A and BA42-00751A antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.01W/kg respectively. This change establishes portable category SAR conditions for the Samsung models NP554XED, NP550XEZ PC with WNC BA42-00750A and BA42-00751A antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.19W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.14W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.19W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00137A PC with AVX 025.901X3.0001 and 025.901X4.0001 and AWAN 025.901WZ.0001 and 025.901X0.0001 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00128B PC with Amphenol TKE378-16-000-R and TKE379-16-000-R and JYT 10-NA0014601 and 10-NA0014701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00128B PC with Amphenol TKE378-16-000-R and TKE379-16-000-R and JYT 10-NA0014601 and 10-NA0014701 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00128B PC with Amphenol TKE378-16-000-R and TKE379-16-000-R and JYT 10-NA0014601 and 10-NA0014701 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and1.59W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE525QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas. Antenna is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE525QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas. Antenna is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE525QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas. Antenna is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.1.02W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE520QEA PC with Galtronics BA42-00743A and 8BA42-00743B antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.01W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP550XED PC with WNC BA42-00750A and BA42-00751A antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.01W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP550XED PC with WNC BA42-00750A and BA42-00751A antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.01W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP550XED PC with WNC BA42-00750A and BA42-00751A antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 0.97W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP750BCJ PC with 81.ELA15.G15 and 81.ELA15.G16 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 0.97W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP750BCJ PC with 81.ELA15.G15 and 81.ELA15.G16 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.97W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP750BCJ PC with 81.ELA15.G15 and 81.ELA15.G16 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C156 PC with INPAQ WA-P-LE-02-036 and WA-P-LE-02-035 and High-Tek DC33002KW00 and DC33002KW10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C156 PC with INPAQ WA-P-LE-02-036 and WA-P-LE-02-035 and High-Tek DC33002KW00 and DC33002KW10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C156 PC with INPAQ WA-P-LE-02-036 and WA-P-LE-02-035 and High-Tek DC33002KW00 and DC33002KW10 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions with time averaging SAR (TAS) algorithm for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, Hong Bo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions with time averaging SAR (TAS) algorithm for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, Hong Bo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions with time averaging SAR (TAS) algorithm for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, Hong Bo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA-MA1TM PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA-MA1TM PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA-MA1TM PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.45W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the HP model HSC-I001R PC with AWAN AUP6Y-100102 and AUP5Y-100006 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the HP model HSC-I001R PC with AWAN AUP6Y-100102 and AUP5Y-100006 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the HP model HSC-I001R PC with AWAN AUP6Y-100102 and AUP5Y-100006 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.52W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00128A PC with JYT NA00053 and NA00054 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.39W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.39W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.91W/kg and 1.39W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE345XDA PC with Galtronics 02112140-07483 and 02112140-07484 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.141W/kg and 1.545W/kg respectively. This change establishes portable category SAR conditions for the Intel model CMCN1CC PC with WGT EGCANWIPB01+A-03 (Tx1) and EGCANWIPB02+A-03 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.621W/kg and 1.545W/kg respectively. This change establishes portable category SAR conditions for the Intel model CMCN1CC PC with WGT EGCANWIPB01+A-03 (Tx1) and EGCANWIPB02+A-03 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.049W/kg and 1.545W/kg respectively. This change establishes portable category SAR conditions for the Intel model CMCN1CC PC with WGT EGCANWIPB01+A-03 (Tx1) and EGCANWIPB02+A-03 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.22W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with INPAQ DQ60PLBLB45 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.22W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with INPAQ DQ60PLBLB45 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.22W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with INPAQ DQ60PLBLB45 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE340XDA PC with Galtronics 002112140-07484 and 02112140-07483 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE340XDA PC with Galtronics 002112140-07484 and 02112140-07483 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE340XDA PC with Galtronics 002112140-07484 and 02112140-07483 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.31W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LB-02-867 (Tx1) and WA-P-LB-02-868 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.31W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LB-02-867 (Tx1) and WA-P-LB-02-868 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.31W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LB-02-867 (Tx1) and WA-P-LB-02-868 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00127A PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.33W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00127A PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.35W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00127A PC with AWAN 025.901S1.0041 and 025.901S1.0051 and WNC 025.901S1.0001 and 025.901S1.0011 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.19W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C12C PC with WNC 81ELA415.G13 and 81ELA415.G18 Main and Aux and HB 330-24000 Main and Aux antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.19W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C12C PC with WNC 81ELA415.G13 and 81ELA415.G18 Main and Aux and HB 330-24000 Main and Aux antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.19W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C12C PC with WNC 81ELA415.G13 and 81ELA415.G18 Main and Aux and HB 330-24000 Main and Aux antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model T04H PC with HB DC33002GR2L and DC33002GR2L and WNC 81ELAW15.G51 and 81ELAW15.G51 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model T04H PC with HB DC33002GR2L and DC33002GR2L and WNC 81ELAW15.G51 and 81ELAW15.G51 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model T04H PC with HB DC33002GR2L and DC33002GR2L and WNC 81ELAW15.G51 and 81ELAW15.G51 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP730QDA PC with ICT BA42-00677A (Tx1) and BA42-00678A (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter mustnot transmit simultaneously with any other antenna or transmitter, except in accordance with FCCmultitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP730QDA PC with ICT BA42-00677A (Tx1) and BA42-00678A (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W151 PC with WNC 81EABD15.G39 and 81EABD15.G40 and HTK 0ACAR020018N and ACAR020019N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W151 PC with WNC 81EABD15.G39 and 81EABD15.G40 and HTK 0ACAR020018N and ACAR020019N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.82W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP730QDA PC with ICT BA42-00677A (Tx1) and BA42-00678A (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-W151 PC with WNC 81EABD15.G39 and 81EABD15.G40 and HTK 0ACAR020018N and ACAR020019N antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13ITL6 PC with Inpaq WA-F-LB-02-242 (Tx1) and WA-F-LB-02-241(Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad X1 Yoga Gen 6, model TP00128A with Amphenol TKC111-16-010-C (Tx1) and TKC112-16-010-C (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad X1 Yoga Gen 6, model TP00128A with Amphenol TKC111-16-010-C (Tx1) and TKC112-16-010-C (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad X1 Yoga Gen 6, model TP00128A with Amphenol TKC111-16-010-C (Tx1) and TKC112-16-010-C (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad x12, model TP00118A with High Tek 025.901QK.0001 (Tx1) and 025.901QJ.0001(Tx2) antennas and WNC 025.901QE.0001 (Tx1) and 025.901QD.0001( Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad x12, model TP00118A with High Tek 025.901QK.0001 (Tx1) and 025.901QJ.0001(Tx2) antennas and WNC 025.901QE.0001 (Tx1) and 025.901QD.0001( Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.59W/kg respectively. This change establishes portable category SAR conditions for the Lenovo ThinkPad x12, model TP00118A with High Tek 025.901QK.0001 (Tx1) and 025.901QJ.0001(Tx2) antennas and WNC 025.901QE.0001 (Tx1) and 025.901QD.0001( Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.30W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Dell model P136G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the Dell model P135G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the Dell model P135G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.44W/kg respectively. This change establishes portable category SAR conditions for the Dell model P135G PC (Aluminum and Carbon Fiber Enclosures) with SPEED F-0G-FH-6119-003-00 (Tx1 and Tx2) antennas, HongBo 260-24329 (Tx1 and Tx2) antennas, WNC 81ELAW15.G08 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P134G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P134G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.45W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P134G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P133G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P133G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.34W/kg respectively. This change establishes portable category SAR conditions for the Dell model P133G PC with SPEED F-0G-FH-6118-003-00 (Tx1 and Tx2) antennas, HongBo 260-24326 (Tx1 and Tx2) antennas, WNC 81ELAW15.G03 (Tx1 and Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P33T, with antenna AWAN part no AYP6Y-200021 (Tx1 and Tx2), HongBo part no 260-24347 (Tx1 and Tx2) and Speedwire part no F-0G-FH-6128-002-00 (Tx1 and Tx2). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.56W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE530QDA/XE531QDA PC with WNC 81XBLA15.G06 (Tx1) and 81XBLA15.G07 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.56W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE530QDA/XE531QDA PC with WNC 81XBLA15.G06 (Tx1) and 81XBLA15.G07 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.56W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE530QDA/XE531QDA PC with WNC 81XBLA15.G06 (Tx1) and 81XBLA15.G07 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.43W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P110F, with antenna Speedwire part no F-0G-FH-6120-003-00 (Tx1 and Tx2) and WNC part no 81ELAW15.G13 (Tx1 and Tx2). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.43W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P110F, with antenna Speedwire part no F-0G-FH-6120-003-00 (Tx1 and Tx2) and WNC part no 81ELAW15.G13 (Tx1 and Tx2). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.43W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P110F, with antenna Speedwire part no F-0G-FH-6120-003-00 (Tx1 and Tx2) and WNC part no 81ELAW15.G13 (Tx1 and Tx2). Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q252 PC with AWAN AYP6Y-200019 (Tx1) and (Tx2), AWAN AYP6Y-200018 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-122 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-121 (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I32C PC with AWAN AUP6Y-100090 (Tx1) and AUP6Y-100091 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I32C PC with AWAN AUP6Y-100090 (Tx1) and AUP6Y-100091 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.57W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q252 PC with AWAN AYP6Y-200019 (Tx1) and (Tx2), AWAN AYP6Y-200018 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-122 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-121 (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q252 PC with AWAN AYP6Y-200019 (Tx1) and (Tx2), AWAN AYP6Y-200018 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-122 (Tx1) and (Tx2), Inpaq WA-P-LBLB-02-121 (Tx1) and (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I32C PC with AWAN AUP6Y-100090 (Tx1) and AUP6Y-100091 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C10C-4 PC with AWAN AUP6Y-100016 (Tx1) and WAAUP6Y- 100017 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C10C-4 PC with AWAN AUP6Y-100016 (Tx1) and WAAUP6Y- 100017 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, HongBo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.91W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C10C-4 PC with AWAN AUP6Y-100016 (Tx1) and WAAUP6Y- 100017 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, HongBo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.43W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I41C-4 PC with AWAN AUP6Y-100071 (Tx1) and AUP6Y-100072 (Tx2) antennas, HongBo 260-27442 (Tx1) and 260-27441 (Tx2), WNC 81EABD15.G06 (Tx1) and 81EABD15.G05 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C10C PC with Inpaq WA-P-LB-02-711 (Tx1) & WA-P-LB-02-712 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C10C PC with Inpaq WA-P-LB-02-711 (Tx1) & WA-P-LB-02-712 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C10C PC with Inpaq WA-P-LB-02-711 (Tx1) & WA-P-LB-02-712 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.84W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.97W/kg and 1.42W/kg respectively. This change establishes portable category SAR conditions for the Dell model P123G PC with SPEED F.0G.FS-6094-005-00 (Tx1 & Tx2) antennas and WNC 81EABC15.G32(Tx1 & Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.10W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad Slim9 14ITL5 PC with Luxshare DC33001NN00 (Tx1/Tx2) antennas, Speed DC33001NP00 (Tx1/Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.10W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad Slim9 14ITL5 PC with Luxshare DC33001NN00 (Tx1/Tx2) antennas, Speed DC33001NP00 (Tx1/Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.10W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad Slim9 14ITL5 PC with Luxshare DC33001NN00 (Tx1/Tx2) antennas, Speed DC33001NP00 (Tx1/Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with Inpaq DQ60PLBLB45 (Tx1/Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with Inpaq DQ60PLBLB45 (Tx1/Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.27W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q250 PC with Inpaq DQ60PLBLB45 (Tx1/Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.23W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C152 PC with WNC DC33002DM00 (Tx1) and DC33002DM10 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C152 PC with WNC DC33002DM00 (Tx1) and DC33002DM10 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-C152 PC with WNC DC33002DM00 (Tx1) and DC33002DM10 (Tx2) antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga 9 14ITL5 with Speed DC33001NT00 (Tx1 and Tx2) antennas, ICT DC33001NV00 (Tx1 and Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga 9 14ITL5 with Speed DC33001NT00 (Tx1 and Tx2) antennas, ICT DC33001NV00 (Tx1 and Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga 9 14ITL5 with Speed DC33001NT00 (Tx1 and Tx2) antennas, ICT DC33001NV00 (Tx1 and Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q248 PC with WNC 81EABB15.GAX (Tx1 and Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13IML05 PC with Inpaq WA-F-LB-03-123 (Tx1) & WA-F-LB-03-122 (Tx2) antennas, Innowave RX-WIFI-MAIN-T6.1(Tx1) & RX-WIFI-AUX-T09.1 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13IML05 PC with Inpaq WA-F-LB-03-123 (Tx1) & WA-F-LB-03-122 (Tx2) antennas, Innowave RX-WIFI-MAIN-T6.1(Tx1) & RX-WIFI-AUX-T09.1 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Yoga Duet 7 13IML05 PC with Inpaq WA-F-LB-03-123 (Tx1) & WA-F-LB-03-122 (Tx2) antennas, Innowave RX-WIFI-MAIN-T6.1(Tx1) & RX-WIFI-AUX-T09.1 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92F PC with WNC 81ELAS15.G39 (Tx1) and 81ELAS15.G40 (Tx2) antennas and HongBo 260-27353(Tx1) and 260-27354 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92F PC with WNC 81ELAS15.G39 (Tx1) and 81ELAS15.G40 (Tx2) antennas and HongBo 260-27353(Tx1) and 260-27354 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92F PC with WNC 81ELAS15.G39 (Tx1) and 81ELAS15.G40 (Tx2) antennas and HongBo 260-27353(Tx1) and 260-27354 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 0.80W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C05C-4 PC with AWAN AUP6Y-100016 and AUP6Y-100017 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C05C PC with Inpaq WA-P-LB-02-711 and WA-PLB- 02-712 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C05C PC with Inpaq WA-P-LB-02-711 and WA-PLB- 02-712 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C05C PC with Inpaq WA-P-LB-02-711 and WA-PLB- 02-712 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I36C-4 PC with WNC 81EABB15.G44 and 81EABB15.G43 and AWAN AUP6Y-100036 and AUP6Y-100035 and HongBo 260-27376 and 260-27375 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I36C-4 PC with WNC 81EABB15.G44 and 81EABB15.G43 and AWAN AUP6Y-100036 and AUP6Y-100035 and HongBo 260-27376 and 260-27375 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-I36C-4 PC with WNC 81EABB15.G44 and 81EABB15.G43 and AWAN AUP6Y-100036 and AUP6Y-100035 and HongBo 260-27376 and 260-27375 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C06C (touch sku) PC with WNC 81ELA415.G18 (Tx1/ Tx2) antennas and HP model HSN-C06C (non-touch sku) PC with WNC 81ELA415.G13 (Tx1/Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C06C (touch sku) PC with WNC 81ELA415.G18 (Tx1/ Tx2) antennas and HP model HSN-C06C (non-touch sku) PC with WNC 81ELA415.G13 (Tx1/Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the HP model HSN-C06C (touch sku) PC with WNC 81ELA415.G18 (Tx1/ Tx2) antennas and HP model HSN-C06C (non-touch sku) PC with WNC 81ELA415.G13 (Tx1/Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) & (Tx2) antennas and HongBo DC33002CQ1L (Tx1) & (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) & (Tx2) antennas and HongBo DC33002CQ1L (Tx1) & (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Dell model P95F PC with Ethertronics DC33002CL3L (Tx1) & (Tx2) antennas and HongBo DC33002CQ1L (Tx1) & (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.16W/kg respectively. This change establishes portable category SAR conditions for the Dell model P97F PC with WNC 025.901NF.0011 (Tx1) and 025.901NG.0011 (Tx2) antennas and HongBo 260-27406(Tx1) and 260-27407 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.16W/kg respectively. This change establishes portable category SAR conditions for the Dell model P97F PC with WNC 025.901NF.0011 (Tx1) and 025.901NG.0011 (Tx2) antennas and HongBo 260-27406(Tx1) and 260-27407 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.89W/kg and 1.53W/kg respectively. This change establishes portable category SAR conditions for the Dell model P94F PC with Ethertronics DC33002CL3L (Tx1) and (Tx2) antennas and HongBo DC33002CQ1L (Tx1) and (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.16W/kg respectively. This change establishes portable category SAR conditions for the Dell model P97F PC with WNC 025.901NF.0011 (Tx1) and 025.901NG.0011 (Tx2) antennas and HongBo 260-27406(Tx1) and 260-27407 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.34W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P131G, with antenna HongBo part no 260-24300 (Tx1 and Tx2), Speedwire part no F-0G-FH-6107-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G09 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.34W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P131G, with antenna HongBo part no 260-24300 (Tx1 and Tx2), Speedwire part no F-0G-FH-6107-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G09 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.91W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Dell model P125G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.23W/kg and 1.34W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P131G, with antenna HongBo part no 260-24300 (Tx1 and Tx2), Speedwire part no F-0G-FH-6107-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G09 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P34S, with antenna HongBo part no 260-24297 (Tx1 and Tx2), Speedwire part no F-0G-FH-6106-001-00 (Tx1 and Tx2) and WNC part no 81ELAS15.G03 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.95W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP850XCJ PC with WNC 81.ELA15.G03 and 81.ELA15.G04 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.82W/kg and 0.95W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP850XCJ PC with WNC 81.ELA15.G03 and 81.ELA15.G04 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 0.95W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP850XCJ PC with WNC 81.ELA15.G03 and 81.ELA15.G04 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P91F, with antenna HongBo part no 260-24311 (Tx1) and 260-24312 (Tx2), HongBo part no 260-24287 (Tx1) and 260-24288 (Tx2), Speedwire part no F.0G.FH-6101-006-00 (Tx1) and F.0G.FH-6101-005-00 (Tx2), Speedwire part no F.0G.FH-6101-002-00 (Tx1) and F.0G-FH-6101-001-00 (Tx2), WNC part no 81ELAS15.G67 (Tx1) and 81ELAS15.G68 (Tx2) and WNC part no 81ELAS15.G02 (Tx1) and 81ELAS15.G01 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P91F, with antenna HongBo part no 260-24311 (Tx1) and 260-24312 (Tx2), HongBo part no 260-24287 (Tx1) and 260-24288 (Tx2), Speedwire part no F.0G.FH-6101-006-00 (Tx1) and F.0G.FH-6101-005-00 (Tx2), Speedwire part no F.0G.FH-6101-002-00 (Tx1) and F.0G-FH-6101-001-00 (Tx2), WNC part no 81ELAS15.G67 (Tx1) and 81ELAS15.G68 (Tx2) and WNC part no 81ELAS15.G02 (Tx1) and 81ELAS15.G01 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P91F, with antenna HongBo part no 260-24311 (Tx1) and 260-24312 (Tx2), HongBo part no 260-24287 (Tx1) and 260-24288 (Tx2), Speedwire part no F.0G.FH-6101-006-00 (Tx1) and F.0G.FH-6101-005-00 (Tx2), Speedwire part no F.0G.FH-6101-002-00 (Tx1) and F.0G-FH-6101-001-00 (Tx2), WNC part no 81ELAS15.G67 (Tx1) and 81ELAS15.G68 (Tx2) and WNC part no 81ELAS15.G02 (Tx1) and 81ELAS15.G01 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P124G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P124G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.33W/kg respectively. This change establishes portable category SAR conditions for the Dell model P124G PC with WNC 025.901MY.0001 (Tx1) and 025.901N7.0001 (Tx2) antennas and HongBo 025.901my.0011(Tx1) and 025.901N7.0011 (Tx2) antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00107B PC with Auden 025.901FT.0011 - Tx1 and 025.901LJ.0011 - Tx2 antennas, WNC 025.901FR.0001 - Tx1 and 025.901LI.0001 - Tx2 antennas and WNC 025.901FT.0001 - Tx1 and 025.901LJ.0001 - Tx2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00107B PC with Auden 025.901FT.0011 - Tx1 and 025.901LJ.0011 - Tx2 antennas, WNC 025.901FR.0001 - Tx1 and 025.901LI.0001 - Tx2 antennas and WNC 025.901FT.0001 - Tx1 and 025.901LJ.0001 - Tx2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.48W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00107B PC with Auden 025.901FT.0011 - Tx1 and 025.901LJ.0011 - Tx2 antennas, WNC 025.901FR.0001 - Tx1 and 025.901LI.0001 - Tx2 antennas and WNC 025.901FT.0001 - Tx1 and 025.901LJ.0001 - Tx2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP730QCJ PC with Luxshare BA42-00677A and BA42-00678A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q237 PC with Inpaq DQ60PLBLB33 Tx1/Tx2 and DQ60PLBLB34 Tx1/Tx2 antennas. Hightek DQ60ACQD061 Tx1/Tx2 and DQ60ACQD062 Tx1/Tx2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q237 PC with Inpaq DQ60PLBLB33 Tx1/Tx2 and DQ60PLBLB34 Tx1/Tx2 antennas. Hightek DQ60ACQD061 Tx1/Tx2 and DQ60ACQD062 Tx1/Tx2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP730QCJ PC with Luxshare BA42-00677A and BA42-00678A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP730QCJ PC with Luxshare BA42-00677A and BA42-00678A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the HP model TPN-Q237 PC with Inpaq DQ60PLBLB33 Tx1/Tx2 and DQ60PLBLB34 Tx1/Tx2 antennas. Hightek DQ60ACQD061 Tx1/Tx2 and DQ60ACQD062 Tx1/Tx2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This change is to provide updated labeling exhibits for this filing. Due to the module very small size (12x16mm overall) in order to put the labeling on the device itself it is so small (<4pt) it is not legible without magnification. For this reason the FCC ID information is placed into the User Guide information. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117G PC (black cover and white cover) with WNC 81ELAS15.G30 and 81ELAS15.G29 antennas, Speedwire F.0G.FH-6100-002-00 and F.0G.FH-6100-001-00 antennas and HongBo 260-24285 and 260-24286 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117G PC (black cover and white cover) with WNC 81ELAS15.G30 and 81ELAS15.G29 antennas, Speedwire F.0G.FH-6100-002-00 and F.0G.FH-6100-001-00 antennas and HongBo 260-24285 and 260-24286 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with CC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.60W/kg respectively. This change establishes portable category SAR conditions for the Dell model P117G PC (black cover and white cover) with WNC 81ELAS15.G30 and 81ELAS15.G29 antennas, Speedwire F.0G.FH-6100-002-00 and F.0G.FH-6100-001-00 antennas and HongBo 260-24285 and 260-24286 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00110B PC with AMP LXA432-16-000-C and LXA433-16-000-C antennas and Speedwire F.0G.ZV-0008-007-00 and F.0G.ZV-0008-008-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00110B PC with AMP LXA432-16-000-C and LXA433-16-000-C antennas and Speedwire F.0G.ZV-0008-007-00 and F.0G.ZV-0008-008-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and1.45W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model TP00110B PC with AMP LXA432-16-000-C and LXA433-16-000-C antennas and Speedwire F.0G.ZV-0008-007-00 and F.0G.ZV-0008-008-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.24W/kg and1.55W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE930QCA PC with Galtronics 02112140-07031 and 02112140-07032 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE930QCA PC with Galtronics 02112140-07031 and 02112140-07032 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.55W/kg respectively. This change establishes portable category SAR conditions for the Samsung model XE930QCA PC with Galtronics 02112140-07031 and 02112140-07032 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and1.29W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.29W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.29W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.25W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and1.25W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.25W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XCJ PC with WNC 81.XBLA15.G03 and 81.XBLA15.G03 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.20W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.36W/kg and1.45W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QCG PC with WNC 81.ELA15.G19 and 81.ELA15.G20 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.60W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S940-14IIL, with antenna WNC part no 025.901KU.0001 (Tx1) and 025.901KV.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.60W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S940-14IIL, with antenna WNC part no 025.901KU.0001 (Tx1) and 025.901KV.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.84W/kg and1.60W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S940-14IIL, with antenna WNC part no 025.901KU.0001 (Tx1) and 025.901KV.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 0.96W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.96W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.96W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P115G, with antenna HongBo part no 260-24281 (Tx1) and 260-24282 (Tx2) and WNC part no 81ELAR15.G07 (Tx1) and 81EAA915.G11 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.32W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-14IIL, with antenna Awan part no AML6Y-200008 (Tx1 and Tx2) and Speedwire part no F-0G-JV-0093-000-00 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.32W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-14IIL, with antenna Awan part no AML6Y-200008 (Tx1 and Tx2) and Speedwire part no F-0G-JV-0093-000-00 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.32W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-14IIL, with antenna Awan part no AML6Y-200008 (Tx1 and Tx2) and Speedwire part no F-0G-JV-0093-000-00 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.37W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.37W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and1.37W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 0.98W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.98W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar ntenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 0.98W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
Intel Corporation S.A.S.
|
|||||
SPORTON International Inc.
|
||||||
KCTL INC
|
||||||
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
||||||
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
||||||
Name |
N****** A******
|
|||||
A******** C****
|
||||||
S**** L****
|
||||||
E**** L********
|
||||||
M****** L********
|
||||||
Telephone Number |
00334********
|
|||||
+886-******** Extension:
|
||||||
+82-3********
|
||||||
+886-********
|
||||||
00334********
|
||||||
+886-******** Extension:
|
||||||
Fax Number |
+886-********
|
|||||
00334********
|
||||||
+886-********
|
||||||
n******@intel.com
|
||||||
a******@sporton.com.tw
|
||||||
s******@kctl.co.kr
|
||||||
e******@tw.bureauveritas.com
|
||||||
m******@dekra.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
1 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
1 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
1 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
1 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
1 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
1 | 11 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
1 | 12 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
1 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
1 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
1 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
1 | 16 | 15E | CC MO | 5845 | 5885 | 0.322 | |||||||||||||||||||||||||||||||||||
1 | 17 | 15E | CC MO | 5835 | 5875 | 0.692 | |||||||||||||||||||||||||||||||||||
1 | 18 | 15E | CC MO | 5855 | 5855 | 0.422 | |||||||||||||||||||||||||||||||||||
1 | 19 | 15E | CC MO | 5815 | 5815 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
4 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
4 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
4 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
4 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
4 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
4 | 11 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
4 | 12 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
4 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
4 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
4 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
4 | 16 | 15E | CC MO | 5845 | 5885 | 0.322 | |||||||||||||||||||||||||||||||||||
4 | 17 | 15E | CC MO | 5835 | 5875 | 0.692 | |||||||||||||||||||||||||||||||||||
4 | 18 | 15E | CC MO | 5855 | 5855 | 0.422 | |||||||||||||||||||||||||||||||||||
4 | 19 | 15E | CC MO | 5815 | 5815 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
7 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
7 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
7 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
7 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
7 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
10 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
10 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
10 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
10 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
10 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
10 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
10 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
10 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
10 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
10 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
10 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
11 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
11 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
11 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
11 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
11 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
11 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
11 | 11 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
11 | 12 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
11 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
11 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
11 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
11 | 16 | 15E | CC MO | 5845 | 5885 | 0.322 | |||||||||||||||||||||||||||||||||||
11 | 17 | 15E | CC MO | 5835 | 5875 | 0.692 | |||||||||||||||||||||||||||||||||||
11 | 18 | 15E | CC MO | 5855 | 5855 | 0.422 | |||||||||||||||||||||||||||||||||||
11 | 19 | 15E | CC MO | 5815 | 5815 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
12 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
12 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
12 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
12 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
12 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
12 | 11 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
12 | 12 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
12 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
12 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
12 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
12 | 16 | 15E | CC MO | 5845 | 5885 | 0.322 | |||||||||||||||||||||||||||||||||||
12 | 17 | 15E | CC MO | 5835 | 5875 | 0.692 | |||||||||||||||||||||||||||||||||||
12 | 18 | 15E | CC MO | 5855 | 5855 | 0.422 | |||||||||||||||||||||||||||||||||||
12 | 19 | 15E | CC MO | 5815 | 5815 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
15 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
15 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
15 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
15 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
15 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
15 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
15 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
15 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
15 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
15 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
15 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
15 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
16 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
16 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
16 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
16 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
16 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
16 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
16 | 1 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
16 | 11 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
16 | 12 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
16 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
16 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
16 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
16 | 16 | 15E | CC MO | 5845 | 5885 | 0.322 | |||||||||||||||||||||||||||||||||||
16 | 17 | 15E | CC MO | 5835 | 5875 | 0.692 | |||||||||||||||||||||||||||||||||||
16 | 18 | 15E | CC MO | 5855 | 5855 | 0.422 | |||||||||||||||||||||||||||||||||||
16 | 19 | 15E | CC MO | 5815 | 5815 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
19 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
19 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
19 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
19 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
19 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
19 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
19 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
19 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
19 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
19 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
19 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
19 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
19 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
19 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
21 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
21 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
21 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
21 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
21 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
21 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
21 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
21 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
21 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
21 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
21 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
21 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
21 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
21 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
24 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
24 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
24 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
24 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
24 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
24 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
24 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
24 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
24 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
24 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
24 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
24 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
24 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
24 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
25 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
25 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
26 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
26 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
26 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
26 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
26 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
26 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
26 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
26 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
26 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
26 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
26 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
28 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
28 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
29 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
29 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
29 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
29 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
29 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
29 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
29 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
29 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
29 | 1 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
29 | 11 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
29 | 12 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
29 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
29 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
29 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
31 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
31 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
32 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
33 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
33 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
33 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
33 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
33 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
33 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
33 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
33 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
33 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
33 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
33 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
33 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
33 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
33 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
33 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
34 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
34 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
34 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
35 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
35 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
35 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
36 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
37 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
37 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
37 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
37 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
37 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
37 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
37 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
37 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
37 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
37 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
37 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
37 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
37 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
37 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
37 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
38 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
38 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
38 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
39 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
39 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
39 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
39 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
39 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
39 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
39 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
39 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
39 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
39 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
39 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
39 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
39 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
39 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
39 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
40 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
41 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
42 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
42 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
42 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
42 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
42 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
42 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
42 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
42 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
42 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
42 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
42 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
42 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
42 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
42 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
42 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
43 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
43 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
43 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
44 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
44 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
44 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
45 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
46 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
46 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
46 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
46 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
46 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
46 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
46 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
46 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
46 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
46 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
46 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
46 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
46 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
46 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
46 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
47 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
47 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
47 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
47 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
47 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
47 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
47 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
47 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
47 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
47 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
47 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
47 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
47 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
47 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
47 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
48 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
49 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
49 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
49 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
50 | 1 | 15E | CC MO | 5180 | 5230 | 0.145 | |||||||||||||||||||||||||||||||||||
50 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
50 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
50 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
50 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
50 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
50 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
50 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
50 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
50 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
50 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
50 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
50 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
50 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
50 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
51 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
52 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
52 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
52 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
53 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
54 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
54 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
54 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
54 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
54 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
54 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
54 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
54 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
54 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
54 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
54 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
54 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
54 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
54 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
54 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
55 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
55 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
55 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
56 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
56 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
56 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
56 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
56 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
56 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
56 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
56 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
56 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
56 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
56 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
56 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
56 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
56 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
56 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
57 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
58 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
58 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
58 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
59 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
60 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
60 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
60 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
61 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
61 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
61 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
61 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
61 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
61 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
61 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
61 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
61 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
61 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
61 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
61 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
61 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
61 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
61 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
62 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
62 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
62 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
63 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
64 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
64 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
64 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
64 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
64 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
64 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
64 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
64 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
64 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
64 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
64 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
64 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
64 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
64 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
64 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
65 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
65 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
65 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
66 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
66 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
66 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
66 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
66 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
66 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
66 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
66 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
66 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
66 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
66 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
66 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
66 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
66 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
66 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
67 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
68 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
69 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
69 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
69 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
69 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
69 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
69 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
69 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
69 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
69 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
69 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
69 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
69 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
69 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
69 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
69 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
70 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
70 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
70 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
71 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
71 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
71 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
71 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
71 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
71 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
71 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
71 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
71 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
71 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
71 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
71 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
71 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
71 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
71 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
72 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
72 | 2 | 15C | CC MO | 2412 | 2462 | 0.955 | |||||||||||||||||||||||||||||||||||
72 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
73 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
74 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
75 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
75 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
75 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
75 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
75 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
75 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
75 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
75 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
75 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
75 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
75 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
75 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
75 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
75 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
75 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
76 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
76 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
76 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
77 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
77 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
77 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
78 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
79 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
79 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
79 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
79 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
79 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
79 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
79 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
79 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
79 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
79 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
79 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
79 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
79 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
79 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
79 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
80 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
80 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
80 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
81 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
81 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
81 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
81 | 4 | 15E | CC ND | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
81 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
81 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
81 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
81 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
81 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
81 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
81 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
81 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
81 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
81 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
81 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
82 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
83 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
83 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
83 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
84 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
85 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
85 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
85 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
85 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
85 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
85 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
85 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
85 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
85 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
85 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
85 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
85 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
85 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
85 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
85 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
86 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
87 | 1 | 15E | CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
87 | 2 | 15E | CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
87 | 3 | 15E | CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
87 | 4 | 15E | CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
87 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
87 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
87 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
87 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
87 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
87 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
87 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
87 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
87 | 13 | 15E | CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
87 | 14 | 15E | CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
87 | 15 | 15E | CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
88 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
88 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
88 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
89 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
89 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
89 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
89 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
89 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
89 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
89 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
89 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
89 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
89 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
89 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
89 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
89 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
89 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
89 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
90 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
91 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
91 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
91 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
92 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
93 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
93 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
93 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
94 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
94 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
94 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
94 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
94 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
94 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
94 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
94 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
94 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
94 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
94 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
94 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
94 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
94 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
94 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
95 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
95 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
95 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
95 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
95 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
95 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
95 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
95 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
95 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
95 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
95 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
95 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
95 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
95 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
95 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
96 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
96 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
96 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
97 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
98 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
98 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
98 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
98 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
98 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
98 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
98 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
98 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
98 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
98 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
98 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
98 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
98 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
98 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
98 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
99 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
100 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
100 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
100 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
101 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
101 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
101 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
102 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
102 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
102 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
102 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
102 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
102 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
102 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
102 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
102 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
102 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
102 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
102 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
102 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
102 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
102 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
103 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
104 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
104 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
104 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
104 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
104 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
104 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
104 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
104 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
104 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
104 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
104 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
104 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
104 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
104 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
104 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
105 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
105 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
105 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
106 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
107 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
108 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
108 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
108 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
109 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
109 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
109 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
109 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
109 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
109 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
109 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
109 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
109 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
109 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
109 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
109 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
109 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
109 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
109 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
110 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
110 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
110 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
111 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
112 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
112 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
112 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
112 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
112 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
112 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
112 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
112 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
112 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
112 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
112 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
112 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
112 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
112 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
112 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
113 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
114 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
114 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
114 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
115 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
115 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
115 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
115 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
115 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
115 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
115 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
115 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
115 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
115 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
115 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
115 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
115 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
115 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
115 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
116 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
117 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
117 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
117 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
117 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
117 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
117 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
117 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
117 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
117 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
117 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
117 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
117 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
117 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
117 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
117 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
118 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
118 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
118 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
119 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
119 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
119 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
120 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
120 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
120 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
120 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
120 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
120 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
120 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
120 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
120 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
120 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
120 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
120 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
120 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
120 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
120 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
121 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
122 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
123 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
123 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
123 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
123 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
123 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
123 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
123 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
123 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
123 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
123 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
123 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
123 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
123 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
123 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
123 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
124 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
124 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
124 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
125 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
125 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
125 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
125 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.84 | |||||||||||||||||||||||||||||||||||
125 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
125 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
125 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.86 | |||||||||||||||||||||||||||||||||||
125 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
125 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
125 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
125 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
125 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
125 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
125 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
125 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
126 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
126 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
126 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
127 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
127 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
127 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
127 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
127 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
127 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
127 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
127 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
127 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
127 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
127 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
127 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
127 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
127 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
127 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
128 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
128 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
128 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
129 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
130 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
131 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
132 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
132 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
132 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
133 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
133 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
133 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
134 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
134 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
134 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
134 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
134 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
134 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
134 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
134 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
134 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
134 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
134 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
134 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
134 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
134 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
134 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
135 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
135 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
135 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
135 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
135 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
135 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
135 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
135 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
135 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
135 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
135 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
135 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
135 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
135 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
135 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
136 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
137 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
138 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
138 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
138 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
138 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
138 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
138 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
138 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
138 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
138 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
138 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
138 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
138 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
138 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
138 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
138 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
139 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
139 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
139 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
140 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
140 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
140 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
141 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
141 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
141 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
141 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
141 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
141 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
141 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
141 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
141 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
141 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
141 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
141 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
141 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
141 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
141 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
142 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
143 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
144 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
144 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
144 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
145 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
145 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
145 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
145 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
145 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
145 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
145 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
145 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
145 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
145 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
145 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
145 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
145 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
145 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
145 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
146 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
147 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
147 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
147 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
148 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
148 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
148 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
148 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
148 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
148 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
148 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
148 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
148 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
148 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
148 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
148 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
148 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
148 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
148 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
149 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
149 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
149 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
149 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
149 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
149 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
149 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
149 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
149 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
149 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
149 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
149 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
149 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
149 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
149 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
150 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
151 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
151 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
151 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
152 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
152 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
152 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
153 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
154 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
154 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
154 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
154 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
154 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
154 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
154 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
154 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
154 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
154 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
154 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
154 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
154 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
154 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
154 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
155 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
155 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
155 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
156 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
157 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
157 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
157 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
157 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
157 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
157 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
157 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
157 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
157 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
157 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
157 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
157 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
157 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
157 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
157 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
158 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
158 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
158 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
158 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
158 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
158 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
158 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
158 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
158 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
158 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
158 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
158 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
158 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
158 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
158 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
159 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
160 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
160 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
160 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
161 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
161 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
161 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
162 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
162 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
162 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
162 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
162 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
162 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
162 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
162 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
162 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
162 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
162 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
162 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
162 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
162 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
162 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
163 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
164 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
164 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
164 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
164 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
164 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
164 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
164 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
164 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
164 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
164 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
164 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
164 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
164 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
164 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
164 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
165 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
166 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
166 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
166 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
167 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
167 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
167 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
167 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
167 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
167 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
167 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
167 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
167 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
167 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
167 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
167 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
167 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
167 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
167 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
168 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
169 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
169 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
169 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
170 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
170 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
170 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
170 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
170 | 5 | 15E | 38 CC MO ND | 5260 | 5310 | 0.145 | |||||||||||||||||||||||||||||||||||
170 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
170 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
170 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
170 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
170 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
170 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
170 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
170 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
170 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
170 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
171 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
171 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
171 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
172 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
173 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
173 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
173 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
174 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
175 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
175 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
175 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
175 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
175 | 5 | 15E | 38 CC MO ND | 5260 | 5310 | 0.145 | |||||||||||||||||||||||||||||||||||
175 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
175 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
175 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
175 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
175 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
175 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
175 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
175 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
175 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
175 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
176 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
177 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
177 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
177 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
177 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
177 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
177 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
177 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
177 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
177 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
177 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
177 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
177 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
177 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
177 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
177 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
178 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
178 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
178 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
179 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
179 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
179 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
179 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
179 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
179 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
179 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
179 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
179 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
179 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
179 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
179 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
179 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
179 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
179 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
180 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
181 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
181 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
181 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
182 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
182 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
182 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
183 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
184 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
184 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
184 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
185 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
186 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
186 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
186 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
186 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
186 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
186 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
186 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
186 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
186 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
186 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
186 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
186 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
186 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
186 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
186 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
187 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
187 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
187 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
187 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
187 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
187 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
187 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
187 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
187 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
187 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
187 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
187 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
187 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
187 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
187 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
188 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
189 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
189 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
189 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
190 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
190 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
190 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
190 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
190 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
190 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
190 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
190 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
190 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
190 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
190 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
190 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
190 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
190 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
190 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
191 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
191 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
191 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
192 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
193 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
193 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
193 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
193 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
193 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
193 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
193 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
193 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
193 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
193 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
193 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
193 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
193 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
193 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
193 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
194 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
195 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
195 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
195 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
196 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
196 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
196 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
196 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
196 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
196 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
196 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
196 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
196 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
196 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
196 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
196 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
196 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
196 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
196 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
197 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
197 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
197 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
198 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
198 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
198 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
198 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
198 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
198 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
198 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
198 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
198 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
198 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
198 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
198 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
198 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
198 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
198 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
199 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
200 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
201 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
201 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
201 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
202 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
202 | 2 | 15E | 38 CC MO | 5180 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
202 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
202 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
202 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
202 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
202 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
202 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
202 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
202 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
202 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
202 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
202 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
202 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
202 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
203 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
203 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
203 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
203 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
203 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
203 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
203 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
203 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
203 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
203 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
203 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
203 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
203 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
203 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
203 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
204 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
205 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
205 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
205 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
206 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
207 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
207 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
207 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
207 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
207 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
207 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
207 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
207 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
207 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
207 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
207 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
207 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
207 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
207 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
207 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
208 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
208 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
208 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
209 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
209 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
209 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
209 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
209 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
209 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
209 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
209 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
209 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
209 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
209 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
209 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
209 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
209 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
209 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
210 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
211 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
211 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
211 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
212 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
212 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
212 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
213 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
214 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
214 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
214 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
214 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
214 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
214 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
214 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
214 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
214 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
214 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
214 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
214 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
214 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
214 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
214 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
215 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
215 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
215 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
215 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
215 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
215 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
215 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
215 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
215 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
215 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
215 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
215 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
215 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
215 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
215 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
216 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
216 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
216 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
217 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
218 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
218 | 2 | 15C | CC MO | 2412 | 2472 | 0.986 | |||||||||||||||||||||||||||||||||||
218 | 3 | 15C | CC MO | 2422 | 2462 | 0.642 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
219 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.133 | |||||||||||||||||||||||||||||||||||
219 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.129 | |||||||||||||||||||||||||||||||||||
219 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.072 | |||||||||||||||||||||||||||||||||||
219 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.036 | |||||||||||||||||||||||||||||||||||
219 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.135 | |||||||||||||||||||||||||||||||||||
219 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.109 | |||||||||||||||||||||||||||||||||||
219 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.062 | |||||||||||||||||||||||||||||||||||
219 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.135 | |||||||||||||||||||||||||||||||||||
219 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.132 | |||||||||||||||||||||||||||||||||||
219 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.103 | |||||||||||||||||||||||||||||||||||
219 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.149 | |||||||||||||||||||||||||||||||||||
219 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.134 | |||||||||||||||||||||||||||||||||||
219 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
219 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.13 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
220 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
221 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
221 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
221 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
222 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
223 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
223 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
223 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
223 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
223 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
223 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
223 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
223 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
223 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
223 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
223 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
223 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
223 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
223 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
223 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
224 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
224 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
224 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
224 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
224 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
224 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
224 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
224 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
224 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
224 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
224 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
224 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
224 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
224 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
224 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
225 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
226 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
226 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
226 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
227 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
227 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
227 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
227 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
227 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
227 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
227 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
227 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
227 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
227 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
227 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
227 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
227 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
227 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
227 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
228 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
229 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
229 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
229 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
230 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
231 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
231 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
231 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
231 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
231 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
231 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
231 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
231 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
231 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
231 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
231 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
231 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
231 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
231 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
231 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
232 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
232 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
232 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
233 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
234 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
234 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
234 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
234 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
234 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
234 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
234 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
234 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
234 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
234 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
234 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
234 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
234 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
234 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
234 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
235 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
235 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
235 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
236 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
237 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
237 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
237 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
237 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
237 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
237 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
237 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
237 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
237 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
237 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
237 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
237 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
237 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
237 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
237 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
238 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
238 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
238 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
239 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
239 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
239 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
240 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
241 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
241 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
241 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
241 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
241 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
241 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
241 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.066 | |||||||||||||||||||||||||||||||||||
241 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
241 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
241 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
241 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
241 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
241 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
241 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
241 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
242 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
242 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
242 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
243 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
243 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
243 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
243 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
243 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
243 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
243 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
243 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
243 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
243 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
243 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
243 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
243 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
243 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
243 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
244 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
245 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
245 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
245 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
245 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
245 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
245 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
245 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
245 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
245 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
245 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
245 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
245 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
245 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
245 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
245 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
246 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
246 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
246 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
247 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
248 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
248 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
248 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
248 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
248 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
248 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
248 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
248 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
248 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
248 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
248 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
248 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
248 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
248 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
248 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
249 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0010000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
250 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
250 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
250 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
251 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
251 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
251 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
252 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0010000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
253 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
253 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
253 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
253 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
253 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
253 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
253 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
253 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
253 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
253 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
253 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
253 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
253 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
253 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
253 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
254 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
255 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.145 | |||||||||||||||||||||||||||||||||||
255 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.13 | |||||||||||||||||||||||||||||||||||
255 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.095 | |||||||||||||||||||||||||||||||||||
255 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.084 | |||||||||||||||||||||||||||||||||||
255 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.145 | |||||||||||||||||||||||||||||||||||
255 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.124 | |||||||||||||||||||||||||||||||||||
255 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.086 | |||||||||||||||||||||||||||||||||||
255 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.141 | |||||||||||||||||||||||||||||||||||
255 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.138 | |||||||||||||||||||||||||||||||||||
255 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.15 | |||||||||||||||||||||||||||||||||||
255 | 11 | 15E | 38 CC MO ND | 5710 | 5710 | 0.149 | |||||||||||||||||||||||||||||||||||
255 | 12 | 15E | 38 CC MO ND | 5720 | 5720 | 0.105 | |||||||||||||||||||||||||||||||||||
255 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.139 | |||||||||||||||||||||||||||||||||||
255 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
255 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.109 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
256 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
256 | 2 | 15C | CC MO | 2412 | 2472 | 0.955 | |||||||||||||||||||||||||||||||||||
256 | 3 | 15C | CC MO | 2422 | 2462 | 0.58 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
257 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0100000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC