happy holidays!

FCC ID: PD9AX210D2 Wi-Fi 6E AX210

by: Intel Corporation latest update: 2024-05-22 model: AX210D2

Forty Six grants have been issued under this FCC ID from 12/02/2020 to 05/22/2024 (this is one of three hundred and fifteen releases in 2024 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, password defaults, troubleshooting guides, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Users Manual pdf June 30 2022 / August 17 2022
various Users Manual pdf August 09 2022 / August 17 2022
various Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 Users Manual pdf 2.61 MiB August 11 2022 / August 17 2022
various TempConfidential 11 EN Intel WiFi Adapter Information Guide Draft Rev05 Users Manual pdf 3.40 MiB September 06 2023 / March 11 2024 delayed release
various Updated Manual 031521 Users Manual pdf 188.77 KiB March 17 2021 / August 17 2021
various User Manual Users Manual pdf 2.70 MiB November 29 2022
various Internal Photos pdf September 06 2023 / September 13 2023
various Internal Photos Antennas Internal Photos pdf 87.68 KiB June 30 2022 / August 17 2022
various 6 GHz Antenna External Photos pdf 127.36 KiB January 20 2021 / August 17 2021 delayed release
various External Photos pdf January 20 2021 / August 17 2021 delayed release
various ID Label/Location Info pdf January 20 2021 / February 18 2021
various Labels and Locations ID Label/Location Info pdf 758.20 KiB November 29 2022
various 220915-09.TR02-FCC MPE WLAN UNII4 AX210D2W Rev01 RF Exposure Info pdf 375.01 KiB September 06 2023 / September 13 2023
various 220915-09.TR04-FCC RSE WLAN UNII4 AX210D2W Rev01 Test Report pdf 468.27 KiB September 06 2023 / September 13 2023
various Attestation Statements pdf September 06 2023 / September 13 2023
various Attestation Statements pdf September 06 2023 / September 13 2023
various Test Report pdf September 06 2023 / September 13 2023
various FCC Confidentiality Letter Cover Letter(s) pdf 183.00 KiB September 06 2023 / September 13 2023
various FCC Modular Approval Letter Cover Letter(s) pdf 1.04 MiB September 06 2023 / September 13 2023
various Premissive Change Letter Cover Letter(s) pdf 964.78 KiB September 06 2023 / September 13 2023
various TempConfidential 220915-09.TR04-FCC RSE WLAN UNII4 AX210D2W Rev01 Photographs Test Setup Photos pdf 442.40 KiB September 06 2023 / March 11 2024 delayed release
various Modular Letter Cover Letter(s) pdf 240.19 KiB November 29 2022
various RF Exposure SAR RF Exposure Info pdf 1.01 MiB November 29 2022
various RF Exposure SAR Calibration RF Exposure Info pdf 2.42 MiB November 29 2022
various Test Report Antenna Data Test Report pdf 362.18 KiB November 29 2022
various Test Report Antenna SkyCross Test Report pdf 718.04 KiB November 29 2022
various Test Setup Photos SAR Test Setup Photos pdf 604.55 KiB November 29 2022
various 210209-01.TR05 - FCC, UNII4 RF, AX210D2W - Photographs Test Setup Photos pdf 921.70 KiB June 30 2022 / August 17 2022
various 210209-01.TR05 - FCC, UNII4 RF, AX210D2W Part1 Test Report pdf 4.48 MiB June 30 2022 / August 17 2022
various 210209-01.TR05 - FCC, UNII4 RF, AX210D2W Part2 Test Report pdf 4.61 MiB June 30 2022 / August 17 2022
various 210209-01.TR08 FCC UNII-4 SAR AX210D2W Rev02 RF Exposure Info pdf 1.00 MiB June 30 2022 / August 17 2022
various 210209-01.TR08 FCC UNII-4 SAR AX210D2W Rev02 Annex E RF Exposure Info pdf 1.62 MiB June 30 2022 / August 17 2022
various 210209-01.TR08 FCC UNII-4 SAR AX210D2W Rev02 Annex F Test Setup Photos pdf 608.57 KiB June 30 2022 / August 17 2022
various FCC - C2PC letter AX210D2W Rev01 Cover Letter(s) pdf 233.68 KiB June 30 2022 / August 17 2022
various Passive-Scan-Attestation-AX210D2W Rev01 Attestation Statements pdf 148.00 KiB June 30 2022 / August 17 2022
various Software-Security-Letter AX210D2W Attestation Statements pdf 910.84 KiB June 30 2022 / August 17 2022
various Confidentiality Letter Cover Letter(s) pdf 541.16 KiB October 22 2021
various Description Antenna WNC Operational Description pdf October 22 2021 confidential
various Modular Approval Letter Cover Letter(s) pdf 790.83 KiB October 22 2021
various Passive Scan Attestation Attestation Statements pdf 162.95 KiB October 22 2021
various RF Exposure SAR Report RF Exposure Info pdf 1.47 MiB October 22 2021
various RF Exposure SAR Report Calibrations RF Exposure Info pdf 4.11 MiB October 22 2021
various Software Security Letter SDR Software/Security Inf pdf October 22 2021 confidential
various Test Report CBP Test Report pdf 1.76 MiB October 22 2021
various Description Antenna Galtronics Operational Description pdf October 22 2021 confidential
various Test Report CBP Rev 02 Test Report pdf 1.69 MiB October 22 2021
various Description Antenna WNC Aux Operational Description pdf October 08 2021 confidential
various Description Antenna WNC Main Operational Description pdf October 08 2021 confidential
various Description Antenna WNC Rev 01 Operational Description pdf October 21 2021 confidential
various Software Security Letter Cover Letter(s) pdf 288.19 KiB October 08 2021 / October 21 2021
various Test Report pdf October 08 2021 / October 21 2021
various Test Report CBP Rev 01 Test Report pdf 1.75 MiB October 21 2021
various Test Setup Photos CBP Test Setup Photos pdf 317.20 KiB October 08 2021 / April 19 2022 delayed release
various Description Antenna Wieson Dipole Operational Description pdf October 07 2021 confidential
various RF Exposure MPE RF Exposure Info pdf 529.99 KiB October 07 2021
various Test Report CBP Appendix A Test Report pdf 81.65 KiB October 07 2021
various Test Report RSE Test Report pdf 449.93 KiB October 07 2021
various Test Setup Photos RSE Test Setup Photos pdf 188.49 KiB October 07 2021 / April 02 2022 delayed release
various Description Antenna Venus Aux Operational Description pdf September 29 2021 confidential
various Description Antenna Venus Main Operational Description pdf September 29 2021 confidential
various Test Setup Photos SAR 6XD Test Setup Photos pdf 510.31 KiB September 23 2021 / March 22 2022 delayed release
various Description Antenna AWAN Operational Description pdf August 05 2021 confidential
various RF Exposure SAR Calibration 6XD RF Exposure Info pdf 3.30 MiB August 05 2021
various RF Exposure SAR Report 6XD RF Exposure Info pdf 2.67 MiB August 05 2021
various Cofidentiality Letter Cover Letter(s) pdf 405.54 KiB June 07 2021
various Description Antenna HongBo Monopole Operational Description pdf June 07 2021 confidential
various Permissive Change Letter Cover Letter(s) pdf 338.15 KiB June 07 2021
various Test Report Radiated Spurious Emissions Test Report pdf 542.69 KiB June 07 2021
various RF Exposure MPE Report RF Exposure Info pdf 445.90 KiB May 28 2021
various Test Setup Photos Radiated Emissions Test Setup Photos pdf 188.43 KiB May 28 2021 / November 24 2021 delayed release
various Decscription Antenna Wieson Dipole Operational Description pdf May 28 2021 confidential
various Decscription Antenna SkyCross Operational Description pdf March 29 2021 confidential
various Description Antenna SkyCross Operational Description pdf March 29 2021 confidential
various Decscription Antenna Operational Description pdf March 23 2021 confidential
various Description Hardware Operational Description pdf March 23 2021 confidential
various RF Exposure Info pdf April 09 2021 / March 13 2021
various RF Exposure Info pdf April 09 2021 / March 13 2021
various Test Setup Photos pdf April 09 2021 / September 09 2021
various Attestation Statements pdf March 11 2021
various RF Exposure SAR Report Calibration RF Exposure Info pdf 2.52 MiB March 05 2021
various Test Report pdf January 20 2021 / February 18 2021
various 6 GHz RFC Part 1 Revised Test Report pdf 3.80 MiB February 18 2021
various Test Report pdf January 20 2021 / February 18 2021
various 6 GHz RFC Part 2 Revised Test Report pdf 5.38 MiB February 18 2021
various Test Report pdf January 20 2021 / February 18 2021
various 6 GHz RFC Part 3 Revised Test Report pdf 1.01 MiB February 18 2021
various AX210D2W 1216 Scheamtics Schematics pdf January 20 2021 confidential
various Typhoon Peak 2 HW Spec Rev0 92 Operational Description pdf January 20 2021 confidential
various Attestation Letter KDB 987594 Attestation Statements pdf 63.40 KiB January 20 2021 / February 18 2021
various Block Diagram Revised Block Diagram pdf January 20 2021 confidential
various Cover Letter Cover Letter(s) pdf 24.26 KiB January 20 2021 / February 18 2021
various Intel WiFi Adapter Information Guide 011421 Users Manual pdf January 20 2021 / August 17 2021 delayed release
various Location of 996369 Info Users Manual pdf January 20 2021 / August 17 2021 delayed release
various Test Photos Test Setup Photos pdf 625.04 KiB January 20 2021 / August 17 2021 delayed release
various Passive Active Scan Letter Attestation Statements pdf 139.54 KiB January 20 2021 / February 18 2021
various RF Exposure Part 1 RF Exposure Info pdf 2.67 MiB January 20 2021 / February 18 2021
various RF Expousre Part 2 RF Exposure Info pdf 4.32 MiB January 20 2021 / February 18 2021
various RFC Test Photos Test Setup Photos pdf 568.60 KiB January 20 2021 / August 17 2021 delayed release
various RSE Test Photos Rev 2 Test Setup Photos pdf 883.82 KiB January 20 2021 / August 17 2021 delayed release
various RSE test Report Rev 2 Test Report pdf 1.36 MiB January 20 2021 / February 18 2021
various Users Manual Revised 021021 Users Manual pdf February 12 2021 / August 17 2021 delayed release
various Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 Users Manual pdf 2.61 MiB August 11 2022 / August 17 2022
various TempConfidential 11 EN Intel WiFi Adapter Information Guide Draft Rev05 Users Manual pdf 3.40 MiB September 06 2023 / March 11 2024 delayed release
various Updated Manual 031521 Users Manual pdf 188.77 KiB March 17 2021 / August 17 2021
various User Manual Users Manual pdf 2.70 MiB November 29 2022
various Internal Photos pdf September 06 2023 / September 13 2023
various Internal Photos Antennas Internal Photos pdf 87.68 KiB June 30 2022 / August 17 2022
various 6 GHz Antenna External Photos pdf 127.36 KiB January 20 2021 / August 17 2021 delayed release
various External Photos pdf January 20 2021 / August 17 2021 delayed release
various ID Label/Location Info pdf January 20 2021 / February 18 2021
various Labels and Locations ID Label/Location Info pdf 758.20 KiB November 29 2022
various 220915-09.TR02-FCC MPE WLAN UNII4 AX210D2W Rev01 RF Exposure Info pdf 375.01 KiB September 06 2023 / September 13 2023
various 220915-09.TR04-FCC RSE WLAN UNII4 AX210D2W Rev01 Test Report pdf 468.27 KiB September 06 2023 / September 13 2023
various Attestation Statements pdf September 06 2023 / September 13 2023
various Attestation Statements pdf September 06 2023 / September 13 2023
various Test Report pdf September 06 2023 / September 13 2023
various FCC Confidentiality Letter Cover Letter(s) pdf 183.00 KiB September 06 2023 / September 13 2023
various FCC Modular Approval Letter Cover Letter(s) pdf 1.04 MiB September 06 2023 / September 13 2023
various Premissive Change Letter Cover Letter(s) pdf 964.78 KiB September 06 2023 / September 13 2023
various TempConfidential 220915-09.TR04-FCC RSE WLAN UNII4 AX210D2W Rev01 Photographs Test Setup Photos pdf 442.40 KiB September 06 2023 / March 11 2024 delayed release
various Modular Letter Cover Letter(s) pdf 240.19 KiB November 29 2022
various RF Exposure SAR RF Exposure Info pdf 1.01 MiB November 29 2022
various RF Exposure SAR Calibration RF Exposure Info pdf 2.42 MiB November 29 2022
various Test Report Antenna Data Test Report pdf 362.18 KiB November 29 2022
various Test Report Antenna SkyCross Test Report pdf 718.04 KiB November 29 2022
various Test Setup Photos SAR Test Setup Photos pdf 604.55 KiB November 29 2022
various 210209-01.TR05 - FCC, UNII4 RF, AX210D2W - Photographs Test Setup Photos pdf 921.70 KiB June 30 2022 / August 17 2022
various 210209-01.TR05 - FCC, UNII4 RF, AX210D2W Part1 Test Report pdf 4.48 MiB June 30 2022 / August 17 2022
various 210209-01.TR05 - FCC, UNII4 RF, AX210D2W Part2 Test Report pdf 4.61 MiB June 30 2022 / August 17 2022
various 210209-01.TR08 FCC UNII-4 SAR AX210D2W Rev02 RF Exposure Info pdf 1.00 MiB June 30 2022 / August 17 2022
various 210209-01.TR08 FCC UNII-4 SAR AX210D2W Rev02 Annex E RF Exposure Info pdf 1.62 MiB June 30 2022 / August 17 2022
various 210209-01.TR08 FCC UNII-4 SAR AX210D2W Rev02 Annex F Test Setup Photos pdf 608.57 KiB June 30 2022 / August 17 2022
various FCC - C2PC letter AX210D2W Rev01 Cover Letter(s) pdf 233.68 KiB June 30 2022 / August 17 2022
various Passive-Scan-Attestation-AX210D2W Rev01 Attestation Statements pdf 148.00 KiB June 30 2022 / August 17 2022
various Software-Security-Letter AX210D2W Attestation Statements pdf 910.84 KiB June 30 2022 / August 17 2022
various Confidentiality Letter Cover Letter(s) pdf 541.16 KiB October 22 2021
various Modular Approval Letter Cover Letter(s) pdf 790.83 KiB October 22 2021
various Passive Scan Attestation Attestation Statements pdf 162.95 KiB October 22 2021
various RF Exposure SAR Report RF Exposure Info pdf 1.47 MiB October 22 2021
various RF Exposure SAR Report Calibrations RF Exposure Info pdf 4.11 MiB October 22 2021
various Test Report CBP Test Report pdf 1.76 MiB October 22 2021
various Test Report CBP Rev 02 Test Report pdf 1.69 MiB October 22 2021
various Software Security Letter Cover Letter(s) pdf 288.19 KiB October 08 2021 / October 21 2021
various Test Report CBP Rev 01 Test Report pdf 1.75 MiB October 21 2021
various Test Setup Photos CBP Test Setup Photos pdf 317.20 KiB October 08 2021 / April 19 2022 delayed release
various RF Exposure MPE RF Exposure Info pdf 529.99 KiB October 07 2021
various Test Report CBP Appendix A Test Report pdf 81.65 KiB October 07 2021
various Test Report RSE Test Report pdf 449.93 KiB October 07 2021
various Test Setup Photos RSE Test Setup Photos pdf 188.49 KiB October 07 2021 / April 02 2022 delayed release
various Test Setup Photos SAR 6XD Test Setup Photos pdf 510.31 KiB September 23 2021 / March 22 2022 delayed release
various RF Exposure SAR Calibration 6XD RF Exposure Info pdf 3.30 MiB August 05 2021
various RF Exposure SAR Report 6XD RF Exposure Info pdf 2.67 MiB August 05 2021
various Cofidentiality Letter Cover Letter(s) pdf 405.54 KiB June 07 2021
various Permissive Change Letter Cover Letter(s) pdf 338.15 KiB June 07 2021
various Test Report Radiated Spurious Emissions Test Report pdf 542.69 KiB June 07 2021
various RF Exposure MPE Report RF Exposure Info pdf 445.90 KiB May 28 2021
various Test Setup Photos Radiated Emissions Test Setup Photos pdf 188.43 KiB May 28 2021 / November 24 2021 delayed release
various RF Exposure Info pdf April 09 2021 / March 13 2021
various RF Exposure Info pdf April 09 2021 / March 13 2021
various Test Setup Photos pdf April 09 2021 / September 09 2021
various Attestation Statements pdf March 11 2021
various RF Exposure SAR Report Calibration RF Exposure Info pdf 2.52 MiB March 05 2021
various 6 GHz RFC Part 1 Revised Test Report pdf 3.80 MiB February 18 2021
various 6 GHz RFC Part 2 Revised Test Report pdf 5.38 MiB February 18 2021
various 6 GHz RFC Part 3 Revised Test Report pdf 1.01 MiB February 18 2021
various Attestation Letter KDB 987594 Attestation Statements pdf 63.40 KiB January 20 2021 / February 18 2021
various Cover Letter Cover Letter(s) pdf 24.26 KiB January 20 2021 / February 18 2021
various Test Photos Test Setup Photos pdf 625.04 KiB January 20 2021 / August 17 2021 delayed release
various Passive Active Scan Letter Attestation Statements pdf 139.54 KiB January 20 2021 / February 18 2021
various RF Exposure Part 1 RF Exposure Info pdf 2.67 MiB January 20 2021 / February 18 2021
various RF Expousre Part 2 RF Exposure Info pdf 4.32 MiB January 20 2021 / February 18 2021
various RFC Test Photos Test Setup Photos pdf 568.60 KiB January 20 2021 / August 17 2021 delayed release
various RSE Test Photos Rev 2 Test Setup Photos pdf 883.82 KiB January 20 2021 / August 17 2021 delayed release
various RSE test Report Rev 2 Test Report pdf 1.36 MiB January 20 2021 / February 18 2021

frequency equipment class purpose
1 2024-05-22 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client Original Equipment
2 2023-09-13 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
3 2022-11-29 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
4 2022-08-17 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
5 2021-10-22 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
6 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
7 2021-10-21 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
8 2021-10-07 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
9 2021-10-04 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
10 2021-09-27 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
11 2021-08-05 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
12 2021-06-07 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2422 ~ 2462 DTS - Digital Transmission System
15 2021-05-28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2422 ~ 2462 DTS - Digital Transmission System
18 2021-04-30 2422 ~ 2462 DTS - Digital Transmission System
19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
21 2021-03-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2422 ~ 2462 DTS - Digital Transmission System
23 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
24 2021-03-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
26 2422 ~ 2462 DTS - Digital Transmission System
27 2021-03-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
28 2422 ~ 2462 DTS - Digital Transmission System
29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
30 2021-03-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 2422 ~ 2462 DTS - Digital Transmission System
32 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
33 2021-03-05 2422 ~ 2462 DTS - Digital Transmission System
34 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2021-03-04 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
37 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 2422 ~ 2462 DTS - Digital Transmission System
39 2021-03-02 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
40 2422 ~ 2462 DTS - Digital Transmission System
41 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
42 2021-02-18 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Original Equipment
43 2020-12-02 2422 ~ 2462 DTS - Digital Transmission System
44 JBP - Part 15 Class B Computing Device Peripheral
45 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
46 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2024-05-22
various 2023-09-13
various 2022-11-29
various 2022-08-17
various 2021-10-22
various 2021-10-21
various 2021-10-07
various 2021-10-04
various 2021-09-27
various 2021-08-05
various 2021-06-07
various 2021-05-28
various 2021-04-30
various 2021-03-29
various 2021-03-23
various 2021-03-13
various 2021-03-11
various 2021-03-05
various 2021-03-04
various 2021-03-02
various 2021-02-18
various 2020-12-02
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0033159344
various 0008035131
various Physical Address 425 rue de Goa Le Cargo B6
various 100 Center Point Circle Suite 200
various 425 rue de Goa
various 100 Center Point Circle
various Antibes, N/A
various Antibes, N/A 06600
various Columbia, South Carolina 29210
various Columbia, SC
various France
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various h******@ACBcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code AX210D2
app s Person at the applicant's address to receive grant or for contact
various Name B**** L******
various S******** C**** H********
various Title Regulatory Engineer
various Product Regulations Engineer
various Telephone Number 04930********
various 803-3********
various Fax Number 04930********
various 803-2********
various E-mail b******@intel.com
various s******@intel.com
app s Technical Contact
various Firm Name Intel Corporation
various Intel Mobile Communications
various Name B******** C****** L********
various B****** L******
various S**** C******** H****
various S**** H****
various S****** H******
various Physical Address 425 rue de Goa
various 100 Center Point Circle
various 100 Center Point Circle Suite 200
various Antibes, 06600
various Columbia, 29212
various Columbia, South Carolina 29210
various Columbia, 29210
various France
various United States
various Telephone Number 04930********
various 80321********
various 80331********
various 803-3********
various E-mail b******@intel.com
various s******@intel.com
app s Non Technical Contact
various Firm Name Intel Corporation
various Name B******** L********
various G******** C******
various Physical Address 425 rue de Goa
various Antibes, 06600
various France
various Telephone Number 04930********
various +3349********
various E-mail b******@intel.com
various g******@intel.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)11/18/2024
various03/11/2024
various04/20/2022
various04/19/2022
various04/02/2022
various03/22/2022
various02/01/2022
various12/04/2021
various11/24/2021
various10/27/2021
various09/25/2021
various09/19/2021
various09/09/2021
various09/07/2021
various09/01/2021
various08/31/2021
various08/29/2021
various08/17/2021
various05/31/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment Class6CD - 15E 6 GHz Low Power Dual Client
variousNII - Unlicensed National Information Infrastructure TX
various6XD - 15E 6 GHz Low Power Indoor Client
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wi-Fi 6E AX210
variousIntel Wi-Fi 6E AX210
variousIntel WiFi 6E AX210
variousIntel Wi-Fi 6 AX210
variousIntel WiFi 6E AX210 Module
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forOriginal Equipment
variousClass II permissive change or modification of presently authorized equipment
variousClass II Permissive Change
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is EIRP. The first four rows reported above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80, 160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna: Intel WRF reference antenna (4.30 to 5.59 dBi).
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This C2PC establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.49 W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.21 W/kg and 1.39 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDB PC with WNC BA42-00704A and BA42-00705A antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.57 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QDB PC with Galtronics 02112140-07479 and 02112140-07480 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDC PC with WNC BA42-00704A and BA42-00705A antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application.(Antenna type: Dipole Antenna / 6XD Grant) Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.23 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XDB PC with WNC BA42-00698A and BA42-006699A antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.30 W/kg and 1.50 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QDB PC with Galtronics 02112140-07491 and 02112140-07492 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 0.25 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P48E PC with AWAN AXP8Y-100005 and XP8Y-100006 and WNC 81EABG15.G24 and 81EABG15.G25 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.38W/kg respectively. Addition of a new antenna, antenna type is different with the original application. (Antenna type: HongBo Monopole Antenna 260-25083 tested at 27mm.) Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.38W/kg respectively. Addition of a new antenna, antenna type is different with the original application. (Antenna type: HongBo Monopole Antenna 260-25083 tested at 27mm.) Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.38W/kg respectively. Addition of a new antenna, antenna type is different with the original application. (Antenna type: HongBo Monopole Antenna 260-25083 tested at 27mm.) Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application. (Antenna type: Dipole Antenna, ARY121-0009-002-H0)
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application. (Antenna type: Dipole Antenna, ARY121-0009-002-H0)
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition an new antenna, antenna type is different with the original application. (Antenna type: Dipole Antenna, ARY121-0009-002-H0)
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 0.74W/kg respectively. This change establishes portable category SAR conditions for the Dell model P48E PC with WNC 81EABG15.G24 and 81EABG15.G25 and AWAN AXP8Y-100005 and AXP8Y-100006 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.74W/kg respectively. This change establishes portable category SAR conditions for the Dell model P48E PC with WNC 81EABG15.G24 and 81EABG15.G25 and AWAN AXP8Y-100005 and AXP8Y-100006 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.38W/kg and 0.74W/kg respectively. This change establishes portable category SAR conditions for the Dell model P48E PC with WNC 81EABG15.G24 and 81EABG15.G25 and AWAN AXP8Y-100005 and AXP8Y-100006 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 0.63 W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type as original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.26W/kg and 0.63W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type as original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 0.63W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type as original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 1.49 W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.49 W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.49 W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QDB PC with Galtronics 02112140-07491 and 02112140-07492 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.30W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QDB PC with Galtronics 02112140-07491 and 02112140-07492 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950QDB PC with Galtronics 02112140-07491 and 02112140-07492 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 1.47 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QDB PC with Galtronics 02112140-07479 and 02112140-07480 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.39W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QDB PC with Galtronics 02112140-07479 and 02112140-07480 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.47W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930QDB PC with Galtronics 02112140-07479 and 02112140-07480 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDB PC with WNC 81XBLB15.G07 and 81XBLB15.G08 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDB PC with WNC 81XBLB15.G07 and 81XBLB15.G08 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDB PC with WNC 81XBLB15.G07 and 81XBLB15.G08 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XDB PC with WNC 81XBLB15.G05 and 81XBLB15.G06 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XDB PC with WNC 81XBLB15.G05 and 81XBLB15.G06 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.33 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP930XDB PC with WNC 81XBLB15.G05 and 81XBLB15.G06 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58 W/kg and 1.21 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDC PC with WNC 81XBLB15.G07 and 81XBLB15.G08 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31 W/kg and 1.21 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDC PC with WNC 81XBLB15.G07 and 81XBLB15.G08 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.21 W/kg respectively. This change establishes portable category SAR conditions for the Samsung model NP950XDC PC with WNC 81XBLB15.G07 and 81XBLB15.G08 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32 W/kg and 0.64 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 17mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various KCTL INC
various TUV Rheinland Nederland B.V.
various Name N****** A****
various S******** L******
various R**** v********
various Telephone Number 00334********
various +82-3********
various 00334********
various 31-08********
various Fax Number 00334********
various 31-59********
various E-mail n******@intel.com
various s******@kctl.co.kr
various r******@nl.tuv.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC EP MO 5955 7115 0.011
1 2 15E CC EP MO 5965 7085 0.024
1 3 15E CC EP MO 5985 7025 0.046
1 4 15E CC EP MO 6025 6985 0.089
1 5 15E CC EP MO 5955 6415 0.537
1 6 15E CC EP MO 5965 6405 0.69
1 7 15E CC EP MO 5985 6385 0.71
1 8 15E CC EP MO 6025 6345 0.349
1 9 15E CC EP MO 6535 6855 0.563
1 1 15E CC EP MO 6565 6845 0.715
1 11 15E CC EP MO 6625 6785 0.722
1 12 15E CC EP MO 6665 6665 0.304
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.159
2 2 15E CC MO 5190 5230 0.219
2 3 15E CC MO 5210 5210 0.076
2 4 15E CC MO 5250 5250 0.063
2 5 15E CC MO ND 5260 5320 0.162
2 6 15E CC MO ND 5270 5310 0.151
2 7 15E CC MO ND 5290 5290 0.072
2 8 15E CC MO ND 5500 5700 0.243
2 9 15E CC MO ND 5710 5710 0.181
2 1 15E CC MO ND 5720 5720 0.123
2 11 15E CC MO ND 5530 5690 0.217
2 12 15E CC MO 5745 5825 0.248
2 13 15E CC MO 5755 5795 0.257
2 14 15E CC MO 5775 5775 0.176
2 15 15E CC MO 5845 5885 0.317
2 16 15E CC MO 5835 5875 0.7
2 17 15E CC MO 5855 5855 0.618
2 18 15E CC MO 5815 5815 0.278
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.159
3 2 15E CC MO 5190 5230 0.219
3 3 15E CC MO 5210 5210 0.076
3 4 15E CC MO 5250 5250 0.063
3 5 15E CC MO ND 5260 5320 0.162
3 6 15E CC MO ND 5270 5310 0.151
3 7 15E CC MO ND 5290 5290 0.072
3 8 15E CC MO ND 5500 5700 0.243
3 9 15E CC MO ND 5710 5710 0.181
3 1 15E CC MO ND 5720 5720 0.123
3 11 15E CC MO ND 5530 5690 0.217
3 12 15E CC MO 5745 5825 0.248
3 13 15E CC MO 5755 5795 0.257
3 14 15E CC MO 5775 5775 0.176
3 15 15E CC MO 5845 5885 0.317
3 16 15E CC MO 5835 5875 0.7
3 17 15E CC MO 5855 5855 0.618
3 18 15E CC MO 5815 5815 0.278
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.159
4 2 15E CC MO 5190 5230 0.219
4 3 15E CC MO 5210 5210 0.076
4 4 15E CC MO 5250 5250 0.063
4 5 15E CC MO ND 5260 5320 0.162
4 6 15E CC MO ND 5270 5310 0.151
4 7 15E CC MO ND 5290 5290 0.072
4 8 15E CC MO ND 5500 5700 0.243
4 9 15E CC MO ND 5710 5710 0.181
4 1 15E CC MO ND 5720 5720 0.123
4 11 15E CC MO ND 5530 5690 0.217
4 12 15E CC MO 5745 5825 0.248
4 13 15E CC MO 5755 5795 0.257
4 14 15E CC MO 5775 5775 0.176
4 15 15E CC MO 5845 5885 0.317
4 16 15E CC MO 5835 5875 0.7
4 17 15E CC MO 5855 5855 0.618
4 18 15E CC MO 5815 5815 0.278
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5955 7115 0.003
5 2 15E CC MO 5965 7085 0.007
5 3 15E CC MO 5985 7025 0.013
5 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5955 7115 0.003
6 2 15E CC MO 5965 7085 0.007
6 3 15E CC MO 5985 7025 0.013
6 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5955 7115 0.003
7 2 15E CC MO 5965 7085 0.007
7 3 15E CC MO 5985 7025 0.013
7 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5955 7115 0.003
8 2 15E CC MO 5965 7085 0.007
8 3 15E CC MO 5985 7025 0.013
8 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5955 7115 0.003
9 2 15E CC MO 5965 7085 0.007
9 3 15E CC MO 5985 7025 0.013
9 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5955 7115 0.003
10 2 15E CC MO 5965 7085 0.007
10 3 15E CC MO 5985 7025 0.013
10 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5955 7115 0.003
11 2 15E CC MO 5965 7085 0.007
11 3 15E CC MO 5985 7025 0.013
11 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.159
12 2 15E CC MO 5190 5230 0.219
12 3 15E CC MO 5210 5210 0.076
12 4 15E CC MO 5250 5250 0.063
12 5 15E CC MO ND 5260 5320 0.162
12 6 15E CC MO ND 5270 5310 0.151
12 7 15E CC MO ND 5290 5290 0.072
12 8 15E CC MO ND 5500 5700 0.243
12 9 15E CC MO ND 5710 5710 0.181
12 1 15E CC MO ND 5720 5720 0.123
12 11 15E CC MO ND 5530 5690 0.217
12 12 15E CC MO 5745 5825 0.248
12 13 15E CC MO 5755 5795 0.257
12 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.009
14 2 15C CC MO 2412 2472 0.787
14 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC MO 5180 5240 0.159
15 2 15E CC MO 5190 5230 0.219
15 3 15E CC MO 5210 5210 0.076
15 4 15E CC MO 5250 5250 0.063
15 5 15E CC MO ND 5260 5320 0.162
15 6 15E CC MO ND 5270 5310 0.151
15 7 15E CC MO ND 5290 5290 0.072
15 8 15E CC MO ND 5500 5700 0.243
15 9 15E CC MO ND 5710 5710 0.181
15 1 15E CC MO ND 5720 5720 0.123
15 11 15E CC MO ND 5530 5690 0.217
15 12 15E CC MO 5745 5825 0.248
15 13 15E CC MO 5755 5795 0.257
15 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.009
17 2 15C CC MO 2412 2472 0.787
17 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.009
18 2 15C CC MO 2412 2472 0.787
18 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.159
20 2 15E CC MO 5190 5230 0.219
20 3 15E CC MO 5210 5210 0.076
20 4 15E CC MO 5250 5250 0.063
20 5 15E CC MO ND 5260 5320 0.162
20 6 15E CC MO ND 5270 5310 0.151
20 7 15E CC MO ND 5290 5290 0.072
20 8 15E CC MO ND 5500 5700 0.243
20 9 15E CC MO ND 5710 5710 0.181
20 1 15E CC MO ND 5720 5720 0.123
20 11 15E CC MO ND 5530 5690 0.217
20 12 15E CC MO 5745 5825 0.248
20 13 15E CC MO 5755 5795 0.257
20 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.009
22 2 15C CC MO 2412 2472 0.787
22 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.159
23 2 15E CC MO 5190 5230 0.219
23 3 15E CC MO 5210 5210 0.076
23 4 15E CC MO 5250 5250 0.063
23 5 15E CC MO ND 5260 5320 0.162
23 6 15E CC MO ND 5270 5310 0.151
23 7 15E CC MO ND 5290 5290 0.072
23 8 15E CC MO ND 5500 5700 0.243
23 9 15E CC MO ND 5710 5710 0.181
23 1 15E CC MO ND 5720 5720 0.123
23 11 15E CC MO ND 5530 5690 0.217
23 12 15E CC MO 5745 5825 0.248
23 13 15E CC MO 5755 5795 0.257
23 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E CC MO 5180 5240 0.159
25 2 15E CC MO 5190 5230 0.219
25 3 15E CC MO 5210 5210 0.076
25 4 15E CC MO 5250 5250 0.063
25 5 15E CC MO ND 5260 5320 0.162
25 6 15E CC MO ND 5270 5310 0.151
25 7 15E CC MO ND 5290 5290 0.072
25 8 15E CC MO ND 5500 5700 0.243
25 9 15E CC MO ND 5710 5710 0.181
25 1 15E CC MO ND 5720 5720 0.123
25 11 15E CC MO ND 5530 5690 0.217
25 12 15E CC MO 5745 5825 0.248
25 13 15E CC MO 5755 5795 0.257
25 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402 2480 0.009
26 2 15C CC MO 2412 2472 0.787
26 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402 2480 0.009
28 2 15C CC MO 2412 2472 0.787
28 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5180 5240 0.159
29 2 15E CC MO 5190 5230 0.219
29 3 15E CC MO 5210 5210 0.076
29 4 15E CC MO 5250 5250 0.063
29 5 15E CC MO ND 5260 5320 0.162
29 6 15E CC MO ND 5270 5310 0.151
29 7 15E CC MO ND 5290 5290 0.072
29 8 15E CC MO ND 5500 5700 0.243
29 9 15E CC MO ND 5710 5710 0.181
29 1 15E CC MO ND 5720 5720 0.123
29 11 15E CC MO ND 5530 5690 0.217
29 12 15E CC MO 5745 5825 0.248
29 13 15E CC MO 5755 5795 0.257
29 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402 2480 0.009
31 2 15C CC MO 2412 2472 0.787
31 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E CC MO 5180 5240 0.159
32 2 15E CC MO 5190 5230 0.219
32 3 15E CC MO 5210 5210 0.076
32 4 15E CC MO 5250 5250 0.063
32 5 15E CC MO ND 5260 5320 0.162
32 6 15E CC MO ND 5270 5310 0.151
32 7 15E CC MO ND 5290 5290 0.072
32 8 15E CC MO ND 5500 5700 0.243
32 9 15E CC MO ND 5710 5710 0.181
32 1 15E CC MO ND 5720 5720 0.123
32 11 15E CC MO ND 5530 5690 0.217
32 12 15E CC MO 5745 5825 0.248
32 13 15E CC MO 5755 5795 0.257
32 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402 2480 0.009
33 2 15C CC MO 2412 2472 0.787
33 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC MO 5180 5240 0.159
34 2 15E CC MO 5190 5230 0.219
34 3 15E CC MO 5210 5210 0.076
34 4 15E CC MO 5250 5250 0.063
34 5 15E CC MO ND 5260 5320 0.162
34 6 15E CC MO ND 5270 5310 0.151
34 7 15E CC MO ND 5290 5290 0.072
34 8 15E CC MO ND 5500 5700 0.243
34 9 15E CC MO ND 5710 5710 0.181
34 1 15E CC MO ND 5720 5720 0.123
34 11 15E CC MO ND 5530 5690 0.217
34 12 15E CC MO 5745 5825 0.248
34 13 15E CC MO 5755 5795 0.257
34 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC MO 5180 5240 0.159
36 2 15E CC MO 5190 5230 0.219
36 3 15E CC MO 5210 5210 0.076
36 4 15E CC MO 5250 5250 0.063
36 5 15E CC MO ND 5260 5320 0.162
36 6 15E CC MO ND 5270 5310 0.151
36 7 15E CC MO ND 5290 5290 0.072
36 8 15E CC MO ND 5500 5700 0.243
36 9 15E CC MO ND 5710 5710 0.181
36 1 15E CC MO ND 5720 5720 0.123
36 11 15E CC MO ND 5530 5690 0.217
36 12 15E CC MO 5745 5825 0.248
36 13 15E CC MO 5755 5795 0.257
36 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.009
38 2 15C CC MO 2412 2472 0.787
38 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.159
39 2 15E CC MO 5190 5230 0.219
39 3 15E CC MO 5210 5210 0.076
39 4 15E CC MO 5250 5250 0.063
39 5 15E CC MO ND 5260 5320 0.162
39 6 15E CC MO ND 5270 5310 0.151
39 7 15E CC MO ND 5290 5290 0.072
39 8 15E CC MO ND 5500 5700 0.243
39 9 15E CC MO ND 5710 5710 0.181
39 1 15E CC MO ND 5720 5720 0.123
39 11 15E CC MO ND 5530 5690 0.217
39 12 15E CC MO 5745 5825 0.248
39 13 15E CC MO 5755 5795 0.257
39 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402 2480 0.009
40 2 15C CC MO 2412 2472 0.787
40 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0130000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15E CC MO 5955 7115 0.003
42 2 15E CC MO 5965 7085 0.007
42 3 15E CC MO 5985 7025 0.013
42 4 15E CC MO 6025 6985 0.025
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402 2480 0.009
43 2 15C CC MO 2412 2472 0.787
43 3 15C CC MO 2422 2462 0.601
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E CC MO 5180 5240 0.159
45 2 15E CC MO 5190 5230 0.219
45 3 15E CC MO 5210 5210 0.076
45 4 15E CC MO 5250 5250 0.063
45 5 15E CC MO ND 5260 5320 0.162
45 6 15E CC MO ND 5270 5310 0.151
45 7 15E CC MO ND 5290 5290 0.072
45 8 15E CC MO ND 5500 5700 0.243
45 9 15E CC MO ND 5710 5710 0.181
45 1 15E CC MO ND 5720 5720 0.123
45 11 15E CC MO ND 5530 5690 0.217
45 12 15E CC MO 5745 5825 0.248
45 13 15E CC MO 5755 5795 0.257
45 14 15E CC MO 5775 5775 0.176
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0130000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC