| submitted / available | |||||||
|---|---|---|---|---|---|---|---|
|
|
User Manual | Users Manual | 1.56 MiB | February 15 2022 / August 14 2022 | delayed release | ||
|
|
User Manual 1 | Users Manual | 4.84 MiB | December 12 2018 / October 06 2019 | |||
|
|
User Manual 2 | Users Manual | 4.77 MiB | December 12 2018 / October 06 2019 | |||
|
|
User Manual 3 | Users Manual | 1.95 MiB | December 12 2018 / October 06 2019 | |||
|
|
User Manual N5 | Users Manual | 739.62 KiB | August 13 2019 / February 09 2020 | delayed release | ||
|
|
User Manual Regulatory | Users Manual | 3.17 MiB | August 14 2019 / February 10 2020 | delayed release | ||
| Users Manual | March 27 2019 / September 23 2019 | ||||||
|
|
User Manual V5 | Users Manual | 756.48 KiB | August 13 2019 / February 09 2020 | delayed release | ||
|
|
Internal Photos | Internal Photos | 880.03 KiB | February 15 2022 / August 14 2022 | delayed release | ||
|
|
Labels and Locations | Internal Photos | 124.74 KiB | November 03 2019 | |||
|
|
External Photos | External Photos | 62.32 KiB | November 12 2017 / September 06 2018 | |||
|
|
Label and Location | ID Label/Location Info | 63.56 KiB | November 27 2018 | |||
|
|
Labels and Locations | ID Label/Location Info | 104.60 KiB | February 15 2022 | |||
|
|
Confidentiality Letter | Cover Letter(s) | 343.98 KiB | February 15 2022 | |||
| Description Antenna AWAN | Operational Description | February 15 2022 | confidential | ||||
| Description Antenna Hong Bo | Operational Description | February 15 2022 | confidential | ||||
|
|
Modular Approval Letter | Cover Letter(s) | 447.78 KiB | February 15 2022 | |||
|
|
Premissive Change Letter | Cover Letter(s) | 832.87 KiB | February 15 2022 | |||
|
|
RF Exposure SAR Calibration | RF Exposure Info | 4.50 MiB | February 15 2022 | |||
|
|
RF Exposure SAR Report | RF Exposure Info | 1.45 MiB | February 15 2022 | |||
|
|
Software Security Letter | Cover Letter(s) | 237.96 KiB | February 15 2022 | |||
|
|
Test Setup Photos SAR | Test Setup Photos | 618.80 KiB | February 15 2022 / August 14 2022 | delayed release | ||
|
|
Passive Scan Attestation | Attestation Statements | 53.62 KiB | February 15 2022 | |||
|
|
Cofidentiality Letter | Cover Letter(s) | 296.96 KiB | April 01 2021 | |||
| Description Antenna WNC | Operational Description | April 01 2021 | confidential | ||||
|
|
Modular Letter | Cover Letter(s) | 134.14 KiB | April 01 2021 | |||
|
|
Permissive Change Letter | Cover Letter(s) | 738.65 KiB | April 01 2021 | |||
| Description Antenna Speed | Operational Description | March 30 2021 | confidential | ||||
| Descritpion Antenna WNC | Operational Description | May 18 2020 | confidential | ||||
|
|
Authorization Letter | Cover Letter(s) | 501.50 KiB | April 17 2020 / April 20 2020 | |||
| Description Antenna Speedwire | Operational Description | April 17 2020 | confidential | ||||
| Description Antenna Metal | Operational Description | September 03 2019 | confidential | ||||
| Description Antenna Plastic | Operational Description | September 03 2019 | confidential | ||||
| Description Antenna WNC N5 | Operational Description | August 13 2019 | confidential | ||||
| Description Antenna WNC V5 | Operational Description | August 13 2019 | confidential | ||||
| Descritpion Antenna HongBo N5 | Operational Description | August 13 2019 | confidential | ||||
| Descritpion Antenna HongBo V5 | Operational Description | August 13 2019 | confidential | ||||
| Description Antenna Speedwire N5 | Operational Description | August 12 2019 | confidential | ||||
| Descritpion Antenna Speedwire V5 | Operational Description | August 12 2019 | confidential | ||||
| Description Antenna High Tek | Operational Description | July 31 2019 | confidential | ||||
| Description Antenna Yageo | Operational Description | July 31 2019 | confidential | ||||
| Attestation Statements | July 31 2019 | ||||||
| Descritpion Antenna Speedwire | Operational Description | May 08 2019 | confidential | ||||
| Descritpion Antenna Luxshare | Operational Description | March 27 2019 | confidential | ||||
| Description Antenna Inpaq | Operational Description | March 11 2019 | confidential | ||||
| Description Antenna South Star | Operational Description | March 11 2019 | confidential | ||||
| RF Exposure Info | November 03 2019 | ||||||
| RF Exposure Info | November 03 2019 | ||||||
| Test Setup Photos | November 03 2019 / July 09 2019 | ||||||
| Test Setup Photos | November 03 2019 / July 09 2019 | ||||||
| Description Antenna HTK | Operational Description | February 28 2019 | confidential | ||||
| Descritpion Antenna Yageo | Operational Description | February 28 2019 | confidential | ||||
| RF Exposure Info | February 28 2019 | ||||||
| RF Exposure Info | February 28 2019 | ||||||
| Test Setup Photos | February 28 2019 / August 27 2019 | ||||||
| Test Setup Photos | February 28 2019 / August 27 2019 | ||||||
| Descritpion Antenna Awan | Operational Description | February 26 2019 | confidential | ||||
| RF Exposure Info | February 26 2019 | ||||||
| Test Setup Photos | February 26 2019 / August 25 2019 | ||||||
| RF Exposure Info | February 25 2019 | ||||||
| RF Exposure Info | February 25 2019 | ||||||
| Test Setup Photos | February 25 2019 / August 24 2019 | ||||||
| Test Setup Photos | February 25 2019 / August 24 2019 | ||||||
| Descritpion Antenna HTK | Operational Description | December 12 2018 | confidential | ||||
| Test Setup Photos | December 12 2018 / October 06 2019 | ||||||
| Description Antenna Sky Cross | Operational Description | November 27 2018 | confidential | ||||
| RF Exposure Info | |||||||
| Test Setup Photos | / December 05 2019 | ||||||
|
|
Permissive Change Letter Revised | Cover Letter(s) | 192.39 KiB | ||||
|
|
Frequency Attestation | Attestation Statements | 238.39 KiB | ||||
| RF Exposure Info | |||||||
| Test Report | |||||||
| Test Report | |||||||
| Test Report | |||||||
| Test Report | |||||||
| RF Exposure Info | |||||||
| RF Exposure Info | |||||||
| Test Report | November 12 2017 | ||||||
| Test Setup Photos | November 12 2017 / September 06 2018 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 | ||||||
| Test Report | November 12 2017 |
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2022-02-15 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
| 2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 3 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 4 | 2022-02-14 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 5 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 7 | 2021-04-01 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 8 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 9 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 10 | 2021-03-30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 11 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 12 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 13 | 2021-03-29 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 14 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 16 | 2021-03-18 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 19 | 2021-03-17 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 20 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 22 | 2020-06-03 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 24 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 25 | 2020-06-02 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 26 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 27 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 28 | 2020-05-18 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 31 | 2020-04-20 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 32 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 33 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 34 | 2020-03-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 35 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 36 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 37 | 2019-09-03 | 2402 ~ 2480 | DTS - Digital Transmission System | |
| 38 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX | ||
| 39 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 40 | 2019-08-15 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | |
| 41 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 42 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 43 | 2019-08-14 | 5755 ~ 5795 | NII - Unlicensed National Information Infrastructure TX | |
| 44 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 45 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
| 46 | 2019-08-13 | 5260 ~ 5320 | NII - Unlicensed National Information Infrastructure TX | |
| 47 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 48 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 49 | 2019-07-31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
| 50 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 51 | 5260 ~ 5320 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change | |
| 52 | 2019-05-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
| 53 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 54 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 55 | 2019-03-27 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX | |
| 56 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 57 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
| 58 | 2019-03-11 | 5755 ~ 5795 | NII - Unlicensed National Information Infrastructure TX | |
| 59 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
| 60 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 61 | 2019-02-28 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 62 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX | ||
| 63 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 64 | 2019-02-26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 65 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
| 66 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
| 67 | 2019-02-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 68 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 69 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
| 70 | 2019-02-19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 71 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 72 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
| 73 | 2019-02-11 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 74 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 75 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 76 | 2018-12-13 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 77 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 78 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 79 | 2018-11-27 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 80 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 81 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 82 | 2018-11-13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 83 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 84 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 85 | 2018-11-09 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 86 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 87 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 88 | 2018-11-07 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 89 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 90 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 91 | 2018-09-05 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 92 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 93 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 94 | 2018-09-03 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 95 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 96 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 97 | 2018-08-28 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 98 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 99 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 100 | 2018-08-27 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 101 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 102 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 103 | 2018-07-18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
| 104 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 105 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 106 | 2018-06-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
| 107 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 108 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
| 109 | 2018-06-14 | 2422 ~ 2462 | DTS - Digital Transmission System | |
| 110 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 111 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 112 | 2017-12-11 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
| 113 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
| 114 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 115 | 2422 ~ 2462 | DTS - Digital Transmission System |
| Applicant Information | ||||||
|---|---|---|---|---|---|---|
| Effective |
2022-02-15
|
|||||
|
2022-02-14
|
||||||
|
2021-04-01
|
||||||
|
2021-03-30
|
||||||
|
2021-03-29
|
||||||
|
2021-03-18
|
||||||
|
2021-03-17
|
||||||
|
2020-06-03
|
||||||
|
2020-06-02
|
||||||
|
2020-05-18
|
||||||
|
2020-04-20
|
||||||
|
2020-03-26
|
||||||
|
2019-09-03
|
||||||
|
2019-08-15
|
||||||
|
2019-08-14
|
||||||
|
2019-08-13
|
||||||
|
2019-07-31
|
||||||
|
2019-05-15
|
||||||
|
2019-03-27
|
||||||
|
2019-03-11
|
||||||
|
2019-02-28
|
||||||
|
2019-02-26
|
||||||
|
2019-02-25
|
||||||
|
2019-02-19
|
||||||
|
2019-02-11
|
||||||
|
2018-12-13
|
||||||
|
2018-11-27
|
||||||
|
2018-11-13
|
||||||
|
2018-11-09
|
||||||
|
2018-11-07
|
||||||
|
2018-09-05
|
||||||
|
2018-09-03
|
||||||
|
2018-08-28
|
||||||
|
2018-08-27
|
||||||
|
2018-07-18
|
||||||
|
2018-06-15
|
||||||
|
2018-06-14
|
||||||
|
2017-12-11
|
||||||
| Applicant's complete, legal business name |
Intel Corporation
|
|||||
| FCC Registration Number (FRN) |
0008035131
|
|||||
| Physical Address |
100 Center Point Circle Suite 200
|
|||||
|
100 Center Point Circle
|
||||||
|
Columbia, SC
|
||||||
|
Columbia
|
||||||
|
Columbia, 29210
|
||||||
|
United States
|
||||||
| TCB Information | ||||||
| TCB Application Email Address |
h******@acbcert.com
|
|||||
|
h******@ACBcert.com
|
||||||
|
H******@acbcert.com
|
||||||
| TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
| FCC ID | ||||||
| Grantee Code |
PD9
|
|||||
| Equipment Product Code |
9462NG
|
|||||
| Person at the applicant's address to receive grant or for contact | ||||||
| Name |
S**** C**** H****
|
|||||
| Title |
Product Regulations Engineer
|
|||||
| Telephone Number |
803-3********
|
|||||
| Fax Number |
803-2********
|
|||||
|
s******@intel.com
|
||||||
| Technical Contact | ||||||
| Firm Name |
Intel Corporation
|
|||||
|
Intel Corp.
|
||||||
|
RF Exposure Lab
|
||||||
|
RF Expsoure Lab
|
||||||
|
Intel Mobile Communications
|
||||||
| Name |
S******** H****
|
|||||
|
J******** M****
|
||||||
| Physical Address |
100 Center Point Circle Suite 200
|
|||||
|
100 Center Point Circle
|
||||||
|
802 N. Twin Oaks Valley Road, Suite 105
|
||||||
|
Columbia, South Carolina 29210
|
||||||
|
Columbia, 29210
|
||||||
|
San Marcos, 92069
|
||||||
|
San Marcos, California 92069
|
||||||
|
Columbia, Arizona 29210
|
||||||
|
San Marcos, Arizona 92069
|
||||||
|
Columbia, Virginia 29210
|
||||||
|
Columbia, California 29210
|
||||||
|
United States
|
||||||
| Telephone Number |
80331********
|
|||||
|
1-803********
|
||||||
|
76047********
|
||||||
|
+1760********
|
||||||
|
+1803********
|
||||||
|
+1803********
|
||||||
|
+1760********
|
||||||
|
760-4********
|
||||||
|
+1803********
|
||||||
|
80321********
|
||||||
|
s******@intel.com
|
||||||
|
i******@rfexposurelab.com
|
||||||
|
s******@Intel.com
|
||||||
|
S******@intel.com
|
||||||
| Non Technical Contact | ||||||
| n/a | ||||||
| Confidentiality (long or short term) | ||||||
| Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
| Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
| No | ||||||
| If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/14/2022 | |||||
| 08/13/2022 | ||||||
| 09/28/2021 | ||||||
| 09/26/2021 | ||||||
| 09/25/2021 | ||||||
| 09/13/2021 | ||||||
| 11/30/2020 | ||||||
| 11/29/2020 | ||||||
| 11/14/2020 | ||||||
| 10/17/2020 | ||||||
| 09/19/2020 | ||||||
| 03/01/2020 | ||||||
| 02/10/2020 | ||||||
| 02/09/2020 | ||||||
| 02/08/2020 | ||||||
| 01/27/2020 | ||||||
| 11/11/2019 | ||||||
| 09/23/2019 | ||||||
| 09/07/2019 | ||||||
| 08/27/2019 | ||||||
| 08/25/2019 | ||||||
| 08/24/2019 | ||||||
| 08/18/2019 | ||||||
| 08/09/2019 | ||||||
| 06/10/2019 | ||||||
| 05/26/2019 | ||||||
| 05/12/2019 | ||||||
| 05/08/2019 | ||||||
| 05/06/2019 | ||||||
| 03/03/2019 | ||||||
| 02/28/2019 | ||||||
| 02/23/2019 | ||||||
| 12/12/2018 | ||||||
| 12/11/2018 | ||||||
| 06/09/2018 | ||||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| Cognitive Radio & Software Defined Radio, Class, etc | ||||||
| Is this application for software defined/cognitive radio authorization? | No | |||||
| Equipment Class | DTS - Digital Transmission System | |||||
| DSS - Part 15 Spread Spectrum Transmitter | ||||||
| NII - Unlicensed National Information Infrastructure TX | ||||||
| JBP - Part 15 Class B Computing Device Peripheral | ||||||
| Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wireless - AC 9462 | |||||
| Intel Dual Band Wireless - AC 9462 | ||||||
| Intel Dual Band Wireless-AC 9462 | ||||||
| Intel Wireless-AC 9462 | ||||||
| Intel Wireless-AC 9461 | ||||||
| Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
| Modular Equipment Type | Single Modular Approval | |||||
| Does not apply | ||||||
| Purpose / Application is for | Class II Permissive Change | |||||
| Class II permissive change or modification of presently authorized equipment | ||||||
| Original Equipment | ||||||
| Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
| Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Dell model P152G PC with AWAN AYP6Y-100256 and AYP6Y-100257 and Hong-Bo 260-24390 and 260-24391 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | |||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Dell model P152G PC with AWAN AYP6Y-100256 and AYP6Y-100257 and Hong-Bo 260-24390 and 260-24391 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.45W/kg respectively. This change establishes portable category SAR conditions for the Dell model P152G PC with AWAN AYP6Y-100256 and AYP6Y-100257 and Hong-Bo 260-24390 and 260-24391 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.46W/kg respectively. This change establishes portable category SAR conditions for the Dell model P112F PC with AWAN AYP6Y-100258 and AYP6Y-100259 and Hong-Bo 260-24388 and 260-24389 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.46W/kg respectively. This change establishes portable category SAR conditions for the Dell model P112F PC with AWAN AYP6Y-100258 and AYP6Y-100259 and Hong-Bo 260-24388 and 260-24389 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.46W/kg respectively. This change establishes portable category SAR conditions for the Dell model P112F PC with AWAN AYP6Y-100258 and AYP6Y-100259 and Hong-Bo 260-24388 and 260-24389 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.12W/kg respectively. This change establishes portable category SAR conditions for the Dell model P147G PC with WNC 025.901T8.0011 and 025.901T8.0011 and Hong-Bo 260-29075 and 260-29075 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.12W/kg respectively. This change establishes portable category SAR conditions for the Dell model P147G PC with WNC 025.901T8.0011 and 025.901T8.0011 and Hong-Bo 260-29075 and 260-29075 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.12W/kg respectively. This change establishes portable category SAR conditions for the Dell model P147G PC with WNC 025.901T8.0011 and 025.901T8.0011 and Hong-Bo 260-29075 and 260-29075 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 0.52W/kg respectively. This change establishes portable category SAR conditions for the Dell model P143G GEO PC with Speed 025.901T1.0001 and 025.901TI.0001 and WNC 81EABG15.G12 and 81EABG15.G27 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.52W/kg respectively. This change establishes portable category SAR conditions for the Dell model P143G GEO PC with Speed 025.901T1.0001 and 025.901TI.0001 and WNC 81EABG15.G12 and 81EABG15.G27 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 0.52W/kg respectively. This change establishes portable category SAR conditions for the Dell model P143G GEO PC with Speed 025.901T1.0001 and 025.901TI.0001 and WNC 81EABG15.G12 and 81EABG15.G27 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 0.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P143G CRAFT PC with Speed 025.901T0.0001 and 025.901TH.0001 and WNC 81EABG15.G11 and 81EABG15.G26 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P143G CRAFT PC with Speed 025.901T0.0001 and 025.901TH.0001 and WNC 81EABG15.G11 and 81EABG15.G26 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 0.59W/kg respectively. This change establishes portable category SAR conditions for the Dell model P143G CRAFT PC with Speed 025.901T0.0001 and 025.901TH.0001 and WNC 81EABG15.G11 and 81EABG15.G26 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.10W/kg respectively. This change establishes portable category SAR conditions for the Dell model P106F GEO PC with Speed 025.901T3.0011 and 025.901UL.0011 and WNC 81EABG15.G14 and 81EABG15.G30 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.10W/kg respectively. This change establishes portable category SAR conditions for the Dell model P106F GEO PC with Speed 025.901T3.0011 and 025.901UL.0011 and WNC 81EABG15.G14 and 81EABG15.G30 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.10W/kg respectively. This change establishes portable category SAR conditions for the Dell model P106F GEO PC with Speed 025.901T3.0011 and 025.901UL.0011 and WNC 81EABG15.G14 and 81EABG15.G30 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.72W/kg and 0.77W/kg respectively. This change establishes portable category SAR conditions for the Dell model P106F CRAFT PC with Speed 025.901T2.0011 and 025.901UK.0011 and WNC 025.901T2.0001 and 025.901UK.0001 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 0.77W/kg respectively. This change establishes portable category SAR conditions for the Dell model P106F CRAFT PC with Speed 025.901T2.0011 and 025.901UK.0011 and WNC 025.901T2.0001 and 025.901UK.0001 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 0.77W/kg respectively. This change establishes portable category SAR conditions for the Dell model P106F CRAFT PC with Speed 025.901T2.0011 and 025.901UK.0011 and WNC 025.901T2.0001 and 025.901UK.0001 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 0.86W/kg respectively. This change establishes portable category SAR conditions for the Dell P102F PC with WNC Main & Aux Part No. 81EABC15.G22 and SPEED Main & Aux part no. F.0G.FS-6089-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 0.86W/kg respectively. This change establishes portable category SAR conditions for the Dell P102F PC with WNC Main & Aux Part No. 81EABC15.G22 and SPEED Main & Aux part no. F.0G.FS-6089-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 0.86W/kg respectively. This change establishes portable category SAR conditions for the Dell P102F PC with WNC Main & Aux Part No. 81EABC15.G22 and SPEED Main & Aux part no. F.0G.FS-6089-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 0.96W/kg respectively. This change establishes portable category SAR conditions for the Dell P130G PC with WNC Main & Aux Part No. 81EABC15.G20 and SPEED Main & Aux part no. F.0G.FS-6087-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 0.96W/kg respectively. This change establishes portable category SAR conditions for the Dell P130G PC with WNC Main & Aux Part No. 81EABC15.G20 and SPEED Main & Aux part no. F.0G.FS-6087-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 0.96W/kg respectively. This change establishes portable category SAR conditions for the Dell P130G PC with WNC Main & Aux Part No. 81EABC15.G20 and SPEED Main & Aux part no. F.0G.FS-6087-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 0.77W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Thinkbook 14-IML PC with WNC Main & Aux Part No. 81EAA615.G48 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.77W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Thinkbook 14-IML PC with WNC Main & Aux Part No. 81EAA615.G48 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 0.77W/kg respectively. This change establishes portable category SAR conditions for the Lenovo Thinkbook 14-IML PC with WNC Main & Aux Part No. 81EAA615.G48 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.29W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P121G, with antennas Speedwire part no F.0G.FS-6092-003-00 (Tx1 and Tx2) and WNC part no 81EABC15.G26 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.29W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P121G, with antennas Speedwire part no F.0G.FS-6092-003-00 (Tx1 and Tx2) and WNC part no 81EABC15.G26 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.29W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P121G, with antennas Speedwire part no F.0G.FS-6092-003-00 (Tx1 and Tx2) and WNC part no 81EABC15.G26 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.57W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27408 (Tx1) and 260-27409 (Tx2) and WNC part no 025.901ND.0011 (Tx1) and 025.901NE.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.89W/kg and 1.57W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27408 (Tx1) and 260-27409 (Tx2) and WNC part no 025.901ND.0011 (Tx1) and 025.901NE.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.57W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27408 (Tx1) and 260-27409 (Tx2) and WNC part no 025.901ND.0011 (Tx1) and 025.901NE.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.27W/kg and 0.74W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 14-IML, with antennas WNC part no DQ6615G4800 (Tx1 and Tx2) and WNC part no DQ6615G4700 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 0.74W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 14-IML, with antennas WNC part no DQ6615G4800 (Tx1 and Tx2) and WNC part no DQ6615G4700 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.74W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 14-IML, with antennas WNC part no DQ6615G4800 (Tx1 and Tx2) and WNC part no DQ6615G4700 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 0.68W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antennas Speedwire part no 025.901.JA.0001 (Tx1) and 025.901.JB.0001 (Tx2) and WNC part no 025.901JA.0011 (Tx1) and 025.901JB.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 0.68W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antennas Speedwire part no 025.901.JA.0001 (Tx1) and 025.901.JB.0001 (Tx2) and WNC part no 025.901JA.0011 (Tx1) and 025.901JB.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 0.68W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antennas Speedwire part no 025.901.JA.0001 (Tx1) and 025.901.JB.0001 (Tx2) and WNC part no 025.901JA.0011 (Tx1) and 025.901JB.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 0.70W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P116G, with antennas HongBo part no 260-27337 (Tx1) and 260-27338 (Tx2), WNC part no 025.901JU.0001 (Tx1) and 025.901JZ.0001 (Tx2), HongBo part no 260-27339 (Tx1) and 260-27340 (Tx2) and WNC part no 025.901JX.0001 (Tx1) and 025.901K2.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.70W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P116G, with antennas HongBo part no 260-27337 (Tx1) and 260-27338 (Tx2), WNC part no 025.901JU.0001 (Tx1) and 025.901JZ.0001 (Tx2), HongBo part no 260-27339 (Tx1) and 260-27340 (Tx2) and WNC part no 025.901JX.0001 (Tx1) and 025.901K2.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 0.70W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P116G, with antennas HongBo part no 260-27337 (Tx1) and 260-27338 (Tx2), WNC part no 025.901JU.0001 (Tx1) and 025.901JZ.0001 (Tx2), HongBo part no 260-27339 (Tx1) and 260-27340 (Tx2) and WNC part no 025.901JX.0001 (Tx1) and 025.901K2.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 0.78W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P88F, with antennas Speedwire part no F.0G.FS-6082-001-00 (Tx1) and F.0G.FS-6082-001-00 (Tx2), WNC part no 025.901JT.0001 (Tx1) and 025.901JY.0001 (Tx2), Speedwire part no F.0G.FS-6083-001-00 (Tx1) and F.0G.FS-6083-002-00 (Tx2) and WNC part no 025.901K0.0001 (Tx1) and 025.901K1.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.57W/kg and 0.78W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P88F, with antennas Speedwire part no F.0G.FS-6082-001-00 (Tx1) and F.0G.FS-6082-001-00 (Tx2), WNC part no 025.901JT.0001 (Tx1) and 025.901JY.0001 (Tx2), Speedwire part no F.0G.FS-6083-001-00 (Tx1) and F.0G.FS-6083-002-00 (Tx2) and WNC part no 025.901K0.0001 (Tx1) and 025.901K1.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 0.78W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P88F, with antennas Speedwire part no F.0G.FS-6082-001-00 (Tx1) and F.0G.FS-6082-001-00 (Tx2), WNC part no 025.901JT.0001 (Tx1) and 025.901JY.0001 (Tx2), Speedwire part no F.0G.FS-6083-001-00 (Tx1) and F.0G.FS-6083-002-00 (Tx2) and WNC part no 025.901K0.0001 (Tx1) and 025.901K1.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.01W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S530-13IML, with antennas HighTek. part no 0ACCN018004N (Tx1 and Tx2) and Yageo part no ANTA0LC12792WLAN1 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.01W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S530-13IML, with antennas HighTek. part no 0ACCN018004N (Tx1 and Tx2) and Yageo part no ANTA0LC12792WLAN1 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.01W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S530-13IML, with antennas HighTek. part no 0ACCN018004N (Tx1 and Tx2) and Yageo part no ANTA0LC12792WLAN1 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.28W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antennas Speedwire part no F.0G.FS-6076-001-00 (Tx1) and F.0G.FS-6076-002-00 (Tx2) and WNC part no 025.901ID.0001 (Tx1) and 025.901IE.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.28W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antennas Speedwire part no F.0G.FS-6076-001-00 (Tx1) and F.0G.FS-6076-002-00 (Tx2) and WNC part no 025.901ID.0001 (Tx1) and 025.901IE.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.28W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antennas Speedwire part no F.0G.FS-6076-001-00 (Tx1) and F.0G.FS-6076-002-00 (Tx2) and WNC part no 025.901ID.0001 (Tx1) and 025.901IE.0001 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 0.99W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Legion Y540-15IRH, with antennas Luxshare part no DC33001J200 (Tx1) and DC33001J210 (Tx2) and Speedwire part no DC33001J100 (Tx1) and DC33001J110 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.99W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Legion Y540-15IRH, with antennas Luxshare part no DC33001J200 (Tx1) and DC33001J210 (Tx2) and Speedwire part no DC33001J100 (Tx1) and DC33001J110 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 0.99W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Legion Y540-15IRH, with antennas Luxshare part no DC33001J200 (Tx1) and DC33001J210 (Tx2) and Speedwire part no DC33001J100 (Tx1) and DC33001J110 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.26W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-15IWL PC with Inpaq WA-P-LB-02-615 and WAP-LB-03-120 and South Star NOZ-1229-R0A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.26W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-15IWL PC with Inpaq WA-P-LB-02-615 and WAP-LB-03-120 and South Star NOZ-1229-R0A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.26W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-15IWL PC with Inpaq WA-P-LB-02-615 and WAP-LB-03-120 and South Star NOZ-1229-R0A antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 0.96W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-14IWL PC with Yageo ANTA0LC13162WLAN3 and ANTA0LC13162WLAN3 and HiTek 0ACCN018020N and 0ACCN018020N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.89W/kg and 0.96W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-14IWL PC with Yageo ANTA0LC13162WLAN3 and ANTA0LC13162WLAN3 and HiTek 0ACCN018020N and 0ACCN018020N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 0.96W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-14IWL PC with Yageo ANTA0LC13162WLAN3 and ANTA0LC13162WLAN3 and HiTek 0ACCN018020N and 0ACCN018020N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-14IWL PC with Yageo ANTA0LC13101WLAN1 and ANTA0LC13101WLAN2 and AWAN ANP6Y100298 and ANP6Y100299 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-14IWL PC with Yageo ANTA0LC13101WLAN1 and ANTA0LC13101WLAN2 and AWAN ANP6Y100298 and ANP6Y100299 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.32W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-14IWL PC with Yageo ANTA0LC13101WLAN1 and ANTA0LC13101WLAN2 and AWAN ANP6Y100298 and ANP6Y100299 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.25W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92G PC with WNC Main and Aux Part No. 025.901CY.0011 and Hong Bo Part No. 025.901CY.0011 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.25W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92G PC with WNC Main and Aux Part No. 025.901CY.0011 and Hong Bo Part No. 025.901CY.0011 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.25W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92G PC with WNC Main and Aux Part No. 025.901CY.0011 and Hong Bo Part No. 025.901CY.0011 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.23W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S340-15IWL PC with AWAN ANP6Y-100304 and ANP6Y-100305 and Yageo ANTA0LC13121WLAN1 and ANTA0LC13121WLAN2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.23W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S340-15IWL PC with AWAN ANP6Y-100304 and ANP6Y-100305 and Yageo ANTA0LC13121WLAN1 and ANTA0LC13121WLAN2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.23W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad S340-15IWL PC with AWAN ANP6Y-100304 and ANP6Y-100305 and Yageo ANTA0LC13121WLAN1 and ANTA0LC13121WLAN2 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.00W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-15IWL PC with Yageo ANTA0LC13171WLAN1 and ANTA0LC13171WLAN2 and HighTek 0ACCN018022N and 0ACCN018023N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.00W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-15IWL PC with Yageo ANTA0LC13171WLAN1 and ANTA0LC13171WLAN2 and HighTek 0ACCN018022N and 0ACCN018023N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.00W/kg respectively. This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-15IWL PC with Yageo ANTA0LC13171WLAN1 and ANTA0LC13171WLAN2 and HighTek 0ACCN018022N and 0ACCN018023N antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.08W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo IdeaPad S340-14IWL, with antennas Advanced Wireless and Antenna Inc. part no ANP6Y-100300 (Tx1) and ANP6Y-100301 (Tx2) and HighTek part no 0ACCN018026N (Tx1) and 0ACCN018027N (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.08W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo IdeaPad S340-14IWL, with antennas Advanced Wireless and Antenna Inc. part no ANP6Y-100300 (Tx1) and ANP6Y-100301 (Tx2) and HighTek part no 0ACCN018026N (Tx1) and 0ACCN018027N (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.08W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number Lenovo IdeaPad S340-14IWL, with antennas Advanced Wireless and Antenna Inc. part no ANP6Y-100300 (Tx1) and ANP6Y-100301 (Tx2) and HighTek part no 0ACCN018026N (Tx1) and 0ACCN018027N (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.17W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.17W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.17W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.02W/kg respectively. This change establishes portable category SAR conditions for the Dell model P78F PC WNC Main and Aux Part No. 025.901EN.0001 and Speed Part No. F.0G.FS-6065-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.02W/kg respectively. This change establishes portable category SAR conditions for the Dell model P78F PC WNC Main and Aux Part No. 025.901EN.0001 and Speed Part No. F.0G.FS-6065-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.02W/kg respectively. This change establishes portable category SAR conditions for the Dell model P78F PC WNC Main and Aux Part No. 025.901EN.0001 and Speed Part No. F.0G.FS-6065-003-00 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.97W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P77F PC with WNC Main and Aux Part No. 025.901FU.0001 and Hong Bo Part No. 260-27239 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P77F PC with WNC Main and Aux Part No. 025.901FU.0001 and Hong Bo Part No. 260-27239 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P77F PC with WNC Main and Aux Part No. 025.901FU.0001 and Hong Bo Part No. 260-27239 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.30W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92G PC with WNC Main and Aux Part No. 025.901EO.0011 and Hong Bo Part No. 260-27237 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92G PC with WNC Main and Aux Part No. 025.901EO.0011 and Hong Bo Part No. 260-27237 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 0.99W/kg respectively. This change establishes portable category SAR conditions for the Dell model P92G PC with WNC Main and Aux Part No. 025.901EO.0011 and Hong Bo Part No. 260-27237 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.18W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 & 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.18W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 & 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.18W/kg respectively. This change establishes portable category SAR conditions for the Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 & 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 0.77W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P77F, with antennas HongBo part no 025.901CX.0011 (Tx1 and Tx2) and WNC part no 025.901CX.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 0.77W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P77F, with antennas HongBo part no 025.901CX.0011 (Tx1 and Tx2) and WNC part no 025.901CX.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 0.77W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P77F, with antennas HongBo part no 025.901CX.0011 (Tx1 and Tx2) and WNC part no 025.901CX.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 0.83W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell Model Number P93G, with antennas HongBo part no 260-27187 (Tx1 & Tx2) and WNC part no 025.901D4.0011 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 0.83W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell Model Number P93G, with antennas HongBo part no 260-27187 (Tx1 & Tx2) and WNC part no 025.901D4.0011 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 0.83W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell Model Number P93G, with antennas HongBo part no 260-27187 (Tx1 & Tx2) and WNC part no 025.901D4.0011 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 0.82W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P93G, with antennas HongBo part no 260-27186 (Tx1 and Tx2) and WNC part no 025.901D2.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 0.82W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P93G, with antennas HongBo part no 260-27186 (Tx1 and Tx2) and WNC part no 025.901D2.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.82W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number - P93G, with antennas HongBo part no 260-27186 (Tx1 and Tx2) and WNC part no 025.901D2.0001 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This change is to request addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna. Antenna gain is less than original filing, and RF measurements have been evaluated to demonstrate compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna. Antenna gain is less than the original filing, and RF measurements have been evaluated to demonstrate compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is to request Addition of new antenna, antenna type is different with the original application, Antenna type - Dipole Antenna. Antenna gain is less than the original filing, and RF measurements have been evaluated to demonstrate compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 130S-11IGM, with antennas Inpaq part no WA-F-LB-02-150 Tx1 and WA-F-LB-03-091 Tx2 and Southstar part no NDX-NG116-R Tx1 and NDX-NG116-L Tx2. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.47W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 130S-11IGM, with antennas Inpaq part no WA-F-LB-02-150 Tx1 and WA-F-LB-03-091 Tx2 and Southstar part no NDX-NG116-R Tx1 and NDX-NG116-L Tx2. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.50W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 130S-11IGM, with antennas Inpaq part no WA-F-LB-02-150 Tx1 and WA-F-LB-03-091 Tx2 and Southstar part no NDX-NG116-R Tx1 and NDX-NG116-L Tx2. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 130S-14IGM, with antennas Inpaq part no WA-F-LB-02-120 Tx1 and WA-F-LB-03-078 Tx2 and Southstar part no NDX-ND140APL2 Tx1 and Tx2. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 130S-14IGM, with antennas Inpaq part no WA-F-LB-02-120 Tx1 and WA-F-LB-03-078 Tx2 and Southstar part no NDX-ND140APL2 Tx1 and Tx2. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.49W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ideapad 130S-14IGM, with antennas Inpaq part no WA-F-LB-02-120 Tx1 and WA-F-LB-03-078 Tx2 and Southstar part no NDX-ND140APL2 Tx1 and Tx2. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
| Is there an equipment authorization waiver associated with this application? | No | |||||
| If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
| Test Firm Name and Contact Information | ||||||
| Firm Name |
Intel Corporation S.A.S.
|
|||||
| Name |
N******** A****
|
|||||
| Telephone Number |
00334********
|
|||||
|
00334********
|
||||||
| Fax Number |
00334********
|
|||||
|
n******@intel.com
|
||||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 1 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 1 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 3 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 3 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 3 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 3 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 3 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 3 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 3 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 3 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 3 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 3 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 3 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 4 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 4 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 4 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 5 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 5 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 5 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 5 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 5 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 5 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 5 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 5 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 5 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 5 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 5 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 5 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 6 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 7 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 7 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 7 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 7 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 7 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 7 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 7 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 7 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 7 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 7 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 7 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 7 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 8 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 9 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 9 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 9 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 10 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 10 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 10 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 10 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 10 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 10 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 10 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 10 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 10 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 10 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 10 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 10 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 11 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 12 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 12 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 12 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 13 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 13 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 13 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 13 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 13 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 13 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 13 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 13 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 13 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 13 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 13 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 13 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 14 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 14 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 14 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 15 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 16 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 16 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 16 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 17 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 18 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 18 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 18 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 18 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 18 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 18 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 18 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 18 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 18 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 18 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 18 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 18 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 19 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 19 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 19 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 20 | 1 | 15E | CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 20 | 2 | 15E | CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 20 | 3 | 15E | CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 20 | 4 | 15E | CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 20 | 5 | 15E | CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 20 | 6 | 15E | CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 20 | 7 | 15E | CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 20 | 8 | 15E | CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 20 | 9 | 15E | CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 20 | 1 | 15E | CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 20 | 11 | 15E | CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 20 | 12 | 15E | CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 21 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 22 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 22 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 22 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 23 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 24 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 24 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 24 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 24 | 4 | 15E | 38 CC MO ND | 5260 | 5310 | 0.108 | |||||||||||||||||||||||||||||||||||
| 24 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 24 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 24 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 24 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 24 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 24 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 24 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 24 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 25 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 25 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 25 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 25 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 25 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 25 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 25 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 25 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 25 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 25 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 25 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 25 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 26 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 26 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 26 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 27 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 28 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 28 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 28 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 29 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 30 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 30 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 30 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 30 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 30 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 30 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 30 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 30 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 30 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 30 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 30 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 30 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 31 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 31 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 31 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 31 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 31 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 31 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 31 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 31 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 31 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 31 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 31 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 31 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 32 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 32 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 32 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 33 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 34 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 35 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 35 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 35 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 35 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 35 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 35 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 35 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 35 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 35 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 35 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 35 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 35 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 36 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 36 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 36 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 37 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 37 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 37 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 38 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 38 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 38 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 38 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 38 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 38 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 38 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 38 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 38 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 38 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 38 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 38 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 39 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 40 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 40 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 40 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 40 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 40 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 40 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 40 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 40 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 40 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 40 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 40 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 40 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 41 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 42 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 42 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 42 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 43 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 43 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 43 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 43 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 43 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 43 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 43 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 43 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 43 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 43 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 43 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 43 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 44 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 45 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 45 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 45 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 46 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 46 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 46 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 46 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 46 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 46 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 46 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 46 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 46 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 46 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 46 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 46 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 47 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 47 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 47 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 48 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 49 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 50 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 50 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 50 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 51 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 51 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 51 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 51 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 51 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 51 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 51 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 51 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 51 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 51 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 51 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 51 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 52 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 53 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 53 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 53 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 54 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 54 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 54 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 54 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 54 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 54 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 54 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 54 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 54 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 54 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 54 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 54 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 55 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 55 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 55 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 55 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 55 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 55 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 55 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 55 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 55 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 55 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 55 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 55 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 56 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 57 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 57 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 57 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 58 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 58 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 58 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 58 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 58 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 58 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 58 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 58 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 58 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 58 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 58 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 58 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 59 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 59 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 59 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 60 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 61 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 62 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 62 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 62 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 62 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 62 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 62 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 62 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 62 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 62 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 62 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 62 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.132 | |||||||||||||||||||||||||||||||||||
| 62 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 63 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 63 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 63 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 64 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 65 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 65 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 65 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 65 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 65 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 65 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 65 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 65 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 65 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 65 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 65 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 65 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 66 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 66 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 66 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 67 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 68 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 68 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 68 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 69 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 69 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 69 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 69 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 69 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 69 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 69 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 69 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 69 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 69 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 69 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 69 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 70 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 71 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 71 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 71 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 72 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 72 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 72 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 72 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 72 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 72 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 72 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 72 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 72 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 72 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 72 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 72 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 73 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 73 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 73 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 74 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 75 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 75 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 75 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 75 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 75 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 75 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 75 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 75 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 75 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 75 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 75 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 75 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 76 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 76 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 76 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 77 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 78 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 78 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 78 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 78 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 78 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 78 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 78 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 78 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 78 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 78 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 78 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 78 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 79 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 79 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 79 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 80 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 81 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 81 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 81 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 81 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 81 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 81 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 81 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 81 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 81 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 81 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 81 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 81 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 82 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 83 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 83 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 83 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 84 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 84 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 84 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 84 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 84 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 84 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 84 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 84 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 84 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 84 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 84 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 84 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 85 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 85 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 85 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 85 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 85 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 85 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 85 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 85 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 85 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 85 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 85 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 85 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 86 | 1 | 15C | CC MO | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 86 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 86 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 87 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 88 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 88 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 88 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 89 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 90 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 90 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 90 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 90 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 90 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 90 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 90 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 90 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 90 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 90 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 90 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 90 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 91 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 91 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 91 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 91 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 91 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 91 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 91 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 91 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 91 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 91 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 91 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 91 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 92 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 92 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 92 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 93 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 94 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 94 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 94 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 94 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 94 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 94 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 94 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 94 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 94 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 94 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 94 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 94 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 95 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 96 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 96 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 96 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 97 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 97 | 2 | 15E | 38 CO MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 97 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 97 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 97 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 97 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 97 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 97 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 97 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 97 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 97 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 97 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 98 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 99 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 99 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 99 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 100 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 100 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 100 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 101 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 101 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 101 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 101 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 101 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 101 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 101 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 101 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 101 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 101 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 101 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 101 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 102 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 103 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 103 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 103 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 103 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 103 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 103 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 103 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 103 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 103 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 103 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 103 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 103 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 104 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 104 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 104 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 105 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 106 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 107 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 107 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 107 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 107 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 107 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 107 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 107 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 107 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 107 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 107 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 107 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 107 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 108 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 108 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 108 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 109 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
| 109 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 109 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 110 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 111 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 111 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 111 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 111 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 111 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 111 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 111 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 111 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 111 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 111 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 111 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 111 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 112 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 113 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.104 | |||||||||||||||||||||||||||||||||||
| 113 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.04 | |||||||||||||||||||||||||||||||||||
| 113 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.026 | |||||||||||||||||||||||||||||||||||
| 113 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.108 | |||||||||||||||||||||||||||||||||||
| 113 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.049 | |||||||||||||||||||||||||||||||||||
| 113 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.02 | |||||||||||||||||||||||||||||||||||
| 113 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.125 | |||||||||||||||||||||||||||||||||||
| 113 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.136 | |||||||||||||||||||||||||||||||||||
| 113 | 9 | 15E | 38 CC MO ND | 5530 | 5690 | 0.103 | |||||||||||||||||||||||||||||||||||
| 113 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.135 | |||||||||||||||||||||||||||||||||||
| 113 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.135 | |||||||||||||||||||||||||||||||||||
| 113 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.061 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 114 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 115 | 1 | 15C | CC | 2402 | 2480 | 0.01 | |||||||||||||||||||||||||||||||||||
| 115 | 2 | 15C | CC MO | 2412 | 2472 | 0.64 | |||||||||||||||||||||||||||||||||||
| 115 | 3 | 15C | CC MO | 2422 | 2462 | 0.228 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC