User Guide Product notice Software terms This guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions of Windows. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality. Go to http://www.microsoft.com for details. To access the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions. By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Copyright 2015 Hewlett-Packard Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Celeron, Centrino, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: January 2015 Document Part Number: 806666-001 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). iii iv Safety warning notice Processor configuration setting (select models only) IMPORTANT: Select computer models are configured with an Intel Pentium N35xx series or a Celeron N28xx/N29xx series processor and a Windows operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select models only) Table of contents 1 Starting right ................................................................................................................................................ 1 Visit the HP Apps Store .......................................................................................................................................... 1 Best practices ......................................................................................................................................................... 1 More HP resources ................................................................................................................................................. 2 2 Getting to know your computer ...................................................................................................................... 4 Locating hardware ................................................................................................................................................. 4 Locating software .................................................................................................................................................. 4 Right side ............................................................................................................................................................... 5 Left side ................................................................................................................................................................. 6 Display ................................................................................................................................................................... 7 Changing your notebook to an entertainment stand ......................................................................... 9 Changing your notebook to a tablet ................................................................................................. 10 Top ....................................................................................................................................................................... 11 TouchPad ........................................................................................................................................... 11 Lights ................................................................................................................................................. 12 Keys ................................................................................................................................................... 13 Using the action keys ........................................................................................................................ 13 Bottom ................................................................................................................................................................. 15 Labels ................................................................................................................................................................... 15 3 Connecting to a network .............................................................................................................................. 17 Connecting to a wireless network ....................................................................................................................... 17 Using the wireless controls ............................................................................................................... 17 Wireless button ............................................................................................................... 17 Operating system controls ............................................................................................. 18 Connecting to a WLAN ....................................................................................................................... 18 Using HP Mobile Broadband (select models only) ............................................................................ 19 Using HP DataPass (select models only) .......................................................................................... 19 Inserting and removing a SIM card (select models only) ................................................................. 19 Using Bluetooth wireless devices (select models only) ................................................................... 20 Connecting to a wired networkLAN (select models only) ............................................................................... 20 Sharing data and drives and accessing software ............................................................................................... 21 4 Enjoying entertainment features .................................................................................................................. 22 Using a webcam ................................................................................................................................................... 22 vii Using audio .......................................................................................................................................................... 22 Accessing audio control panel .......................................................................................................... 22 Connecting speakers ......................................................................................................................... 22 Connecting headphones .................................................................................................................... 22 Connecting a microphone ................................................................................................................. 23 Connecting headsets ......................................................................................................................... 23 Using video .......................................................................................................................................................... 23 Connecting video devices using an HDMI cable (select models only) .............................................. 23 Setting up HDMI audio .................................................................................................... 24 Discovering and connecting to Miracast-compatible wireless displays (select models only) ........ 24 Discovering and connecting to Intel WiDi certified displays (select Intel models only) .................. 25 5 Navigating the screen .................................................................................................................................. 26 Using the TouchPad and touch screen gestures ................................................................................................. 26 Tap ..................................................................................................................................................... 26 Two-finger scroll ............................................................................................................................... 26 Two-finger pinch zoom ..................................................................................................................... 27 Two-finger click ................................................................................................................................. 27 Rotating (select models only) ........................................................................................................... 28 One-finger slide (touch screen only) ................................................................................................ 28 Using the keyboard and optional mouse ............................................................................................................ 28 6 Managing power .......................................................................................................................................... 30 Initiating and exiting Sleep and Hibernation ...................................................................................................... 30 Manually initiating and exiting Sleep ................................................................................................ 31 Manually initiating and exiting Hibernation (select models only) ................................................... 31 Setting password protection on wakeup (exiting Sleep or Hibernation) ......................................... 31 Using the power meter and power settings ........................................................................................................ 32 Running on battery power ................................................................................................................................... 32 Factory-sealed battery ..................................................................................................................... 32 Finding battery information .............................................................................................................. 32 Conserving battery power ................................................................................................................. 33 Identifying low battery levels ........................................................................................................... 33 Resolving a low battery level ............................................................................................................ 33 Resolving a low battery level when external power is available .................................. 33 Resolving a low battery level when no power source is available ................................ 34 Resolving a low battery level when the computer cannot exit Hibernation ................. 34 Running on AC power ........................................................................................................................................... 34 Troubleshooting power problems .................................................................................................... 35 Shutting down (turning off) the computer ......................................................................................................... 35 viii 7 Maintaining your computer .......................................................................................................................... 37 Improving performance ....................................................................................................................................... 37 Using Disk Defragmenter .................................................................................................................. 37 Using Disk Cleanup ............................................................................................................................ 37 Using HP 3D DriveGuard (select models only) .................................................................................. 37 Identifying HP 3D DriveGuard status .............................................................................. 38 Updating programs and drivers .......................................................................................................................... 38 Cleaning your computer ...................................................................................................................................... 38 Cleaning procedures ......................................................................................................................... 39 Cleaning the display ........................................................................................................ 39 Cleaning the sides or cover ............................................................................................. 39 Cleaning the TouchPad, keyboard, or mouse (select models only) .............................. 39 Traveling with or shipping your computer .......................................................................................................... 39 8 Securing your computer and information ...................................................................................................... 41 Using passwords .................................................................................................................................................. 41 Setting Windows passwords ............................................................................................................. 41 Setting Setup Utility (BIOS) passwords ............................................................................................ 42 Using Internet security software ......................................................................................................................... 42 Using antivirus software ................................................................................................................... 42 Using firewall software ..................................................................................................................... 43 Installing software updates ................................................................................................................................ 43 Installing critical security updates ...................................................................................................................... 43 Using HP Touchpoint Manager (select models only) .......................................................................................... 43 Securing your wireless network .......................................................................................................................... 44 Backing up your software applications and information ................................................................................... 44 Using an optional security cable lock .................................................................................................................. 44 9 Using Setup Utility (BIOS) ............................................................................................................................. 45 Starting Setup Utility (BIOS) ................................................................................................................................ 45 Updating the BIOS ................................................................................................................................................ 45 Determining the BIOS version ........................................................................................................... 45 Downloading a BIOS update .............................................................................................................. 46 Synchronizing a tablet and keyboard (select models only) ............................................................................... 47 10 Using HP PC Hardware Diagnostics (UEFI) ..................................................................................................... 48 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device .................................................................... 48 11 Backing up, restoring, and recovering ......................................................................................................... 50 Creating recovery media and backups ................................................................................................................ 50 ix Creating HP Recovery media (select models only) ........................................................................... 50 Using Windows tools ........................................................................................................................................... 51 Restore and recovery .......................................................................................................................................... 51 Recovering using HP Recovery Manager .......................................................................................... 52 What you need to know before you get started ............................................................ 52 Using the HP Recovery partition (select models only) .................................................. 53 Using HP Recovery media to recover ............................................................................. 53 Changing the computer boot order ................................................................................ 53 Removing the HP Recovery partition (select models only) ........................................... 54 12 Specifications ........................................................................................................................................... 55 Input power .......................................................................................................................................................... 55 Operating environment ....................................................................................................................................... 55 13 Electrostatic Discharge .............................................................................................................................. 56 14 Accessibility .............................................................................................................................................. 57 Supported assistive technologies ....................................................................................................................... 57 Contacting support .............................................................................................................................................. 57 Index ............................................................................................................................................................. 58 x 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer, fun things to do with your computer, and where to find additional HP resources. Visit the HP Apps Store The HP Apps Store offers a wide choice of popular games, entertainment and music apps, productivity apps, and apps exclusive to HP that you can download to the Start screen. The selection is updated regularly and includes regional content and country-specific offers. Be sure to check the HP Apps Store frequently for new and updated features. IMPORTANT: You must be connected to the Internet to access the HP Apps Store. To view and download an app:
1. 2. From the Start screen, select the Store app. Select HP picks to view all the available apps. NOTE: HP picks is available in select countries only. 3. Select the app you want to download, and then follow the on-screen instructions. When the download is complete, the app appears on the All apps screen. Best practices After you set up and register the computer, we recommend the following steps to get the most out of your smart investment:
Back up your hard drive by creating recovery media. See Backing up, restoring, and recovering on page 50. If you havent already done so, connect to a wired or wireless network. See details in Connecting to a network on page 17. Become familiar with the computer hardware and software. For more information, see Getting to know your computer on page 4 and Enjoying entertainment features on page 22. Update or purchase antivirus software. See Using antivirus software on page 42. Visit the HP Apps Store 1 More HP resources To locate resources that provide product details, how-to information, and more, use this table. Contents Overview of computer setup and features A broad range of how-to information and troubleshooting tips Online chat with an HP technician Support telephone numbers HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including information about proper battery disposal Specific warranty information about this computer Resource Setup Instructions Help and Support To access Help and Support:
From the Start screen, type help, and then from the Search window, select Help and Support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/
wwcontact_us.html. Worldwide support To get support in your language, go to http://welcome.hp.com/country/us/en/
wwcontact_us.html. Safety & Comfort Guide To access this guide:
1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. 2. Select My computer, and then select User guides. or Go to http://www.hp.com/ergo. Regulatory, Safety and Environmental Notices To access this document:
1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. 2. Select My computer, and then select User guides. Limited Warranty*
To access this document:
1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. 2 Chapter 1 Starting right Resource Contents 2. Select My computer, and then select Warranty and services. or Go to http://www.hp.com/go/orderdocuments.
*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/
orderdocuments or write to:
North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. More HP resources 3 2 Getting to know your computer Locating hardware To find out what hardware is installed on your computer:
1. From the Start screen, type control panel, and then select Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select System and Security, select System, and then click Device Manager in the left column. A list displays all the devices installed on your computer. 2. For information about system hardware components and the system BIOS version number, press fn+esc
(select models only). Locating software To find out what software is installed on your computer:
From the Start screen, click the down arrow in the lower-left corner of the screen. or From the Windows desktop, right-click the Start button, and then select Programs and Features. 4 Chapter 2 Getting to know your computer Right side Component
(1)
(2) SIM slot (select models only) Supports a wireless subscriber identity module (SIM) card. The SIM slot is located on the right side of the computer. Description Audio-out (headphone)/Audio-in (microphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this document:
From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. NOTE: When a device is connected to the jack, the computer speakers are disabled. NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-
in (microphone). Returns you to the Start screen from an open app or the Windows desktop. NOTE: Pressing the Windows button again will return you to the previous screen. Connect optional USB devices, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component, or a high-speed High-Definition Multimedia Interface (HDMI) device.
(3) Windows button USB 3.0 ports (2) HDMI port
(4)
(5)
(6) RJ-45 (network) jack/status lights Connects a network cable. White: The network is connected. Amber: Activity is occurring on the network. Right side 5
(7) AC adapter light White: The computer is connected to external power and the battery is fully charged. Blinking white: The computer is disconnected from external power and the battery has reached a low battery level. Amber: The computer is connected to external power and the battery is charging. Off: The battery is not charging.
(8) Power connector Connects an AC adapter. Left side Component
(1) Power button
(2) Security cable slot 6 Chapter 2 Getting to know your computer Description When the computer is off, press the button to turn on the computer. When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button briefly to exit Sleep. When the computer is in Hibernation, press the button briefly to exit Hibernation. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. To learn more about your power settings, see your power options. From the Start screen, type power, select Power and sleep settings, and then select Power and sleep from the list of applications. or From the Windows desktop, right-click the Start button, and then select Power Options. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Component
(3)
(4) USB 2.0 port Memory card reader Description Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Reads optional memory cards that enable you to store, manage, share or access information. To insert a card:
Hold the card label-side up, with connectors facing the slot, insert the card into the slot, and then push in on the card until it is firmly seated. To remove a card:
Press in on the card it until it pops out.
(5) Volume button Controls speaker volume. To decrease speaker volume, press the edge of the button. To increase speaker volume, press the + edge of the button. Blinking white: The hard drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the hard drive. For more information about HP 3D DriveGuard, NOTE:
see Using HP 3D DriveGuard (select models only) on page 37.
(6) Hard drive light Display Display 7 Component Description WLAN antenna(s)* (Includes 1 or 2 antennas depending on the model) Send and receive wireless signals to communicate with wireless local area networks (WLANs). WWAN antennas* (select models only) Send and receive wireless signals to communicate with wireless wide area networks (WWAN).
(1)
(2)
(3)
(4)
(5) Internal microphones Webcam light Webcam
(6) Internal display switch Record sound. On: The webcam is in use. Records video and captures photographs. Some models allow you to video conference and chat online using streaming video. To use the webcam:
From the Start screen, type camera, and then select Camera from the list of applications. Turns off the display and initiates Sleep if the display is closed while the power is on. NOTE: The internal display switch is not visible from the outside of the computer.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this document:
From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. Your computer can function as a classic notebook and, in addition, the display can be rotated so that the computer transforms into an entertainment stand or a tablet. 8 Chapter 2 Getting to know your computer Changing your notebook to an entertainment stand To change your notebook to an entertainment stand, raise the display, and then rotate the display backward to a stand position (about 315 degrees). Display 9 Changing your notebook to a tablet To change your notebook to a tablet, raise the display, and then rotate the display backward until it is flush with the computer bottom (360 degrees). 10 Chapter 2 Getting to know your computer Top TouchPad Component
(1)
(2)
(3) TouchPad zone Left TouchPad button Right TouchPad button Description Reads your finger gestures to move the pointer or activate items on the screen. For more information, see Using the TouchPad and NOTE:
touch screen gestures on page 26. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Top 11 Lights Component Description
(1)
(2) Caps lock light On: Caps lock is on, which switches the keys to all capital letters. Mute light Amber: Computer sound is off. Off: Computer sound is on. 12 Chapter 2 Getting to know your computer Keys Component Description
(1)
(2)
(3)
(4) esc key fn key Windows key Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with the esc key, or on select models, the spacebar. Returns you to the Start screen from an open app or the Windows desktop. NOTE: Pressing the Windows key again will return you to the previous screen. Action keys Execute frequently used system functions. NOTE: On select models, the f5 action key turns the radiance backlight keyboard feature off or on. Using the action keys Depending on the model, your computer may have the function key features as described in this table. An action key performs an assigned function. The icon on each of the action keys illustrates the assigned function for that key. To use an action key function, press and hold the key. CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE: The action key feature is enabled at the factory. You can disable this feature in Setup Utility (BIOS). Refer to Help and Support for additional information. After you have disabled the action key feature, you can still perform each function by pressing the fn key in combination with the appropriate action key. Icon Description Opens Help and Support, which provides tutorials, information about the Windows operating system and your computer, answers to questions, and updates to your computer. Help and Support also provides automated troubleshooting tools and access to support. Top 13 Icon Description Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, repeatedly pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Turns the radiance backlight keyboard (also known as keyboard backlight) feature off or on. NOTE: To conserve battery power, turn off this feature. Mutes or restores speaker sound. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Plays the previous track of an audio CD or the previous section of a DVD or a BD. Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD. Plays the next track of an audio CD or the next section of a DVD or a BD. Turns the airplane mode and wireless feature on or off. NOTE: The airplane mode key is also referred to as the wireless button. NOTE: A wireless network must be set up before a wireless connection is possible. 14 Chapter 2 Getting to know your computer Bottom Component
(1) Speakers Description Produce sound. Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the removable service door, or on the back of the display. Service labelProvides important information to identify your computer. When contacting support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. Component
(1)
(2) Serial number Product number Bottom 15 Component
(3)
(4) Warranty period Model number (select models only) Microsoft Certificate of Authenticity label (select models only prior to Windows 8)Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. HP platforms with Windows 8 or Windows 8.x preinstalled do not have the physical label. Instead a Digital Product Key is electronically installed. NOTE: The Digital Product Key is automatically recognized and activated by Microsoft operating systems when a Windows 8 or Windows 8.x operating system is reinstalled using HP-approved recovery methods. Regulatory label(s)Provide(s) regulatory information about the computer. Wireless certification label(s)Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. 16 Chapter 2 Getting to know your computer 3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Your computer may be equipped with one or more of the following wireless devices:
WLAN deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. HP Mobile Broadband ModuleGives you wireless connectivity over a wireless wide area network
(WWAN), a much larger area. Mobile network operators install base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. For more information about wireless technology, the Internet, and networking, see the information and website links provided in Help and Support. From the Start screen, type help, and then select Help and Support. Using the wireless controls You can control the wireless devices in your computer using one or more of these features:
Wireless button or wireless key (also called the airplane mode key) (referred to in this chapter as the wireless button) Operating system controls Wireless button The computer has a wireless button, one or more wireless devices, and, on select models, one or two wireless lights. All the wireless devices on your computer are enabled at the factory. If your computer has a wireless light, the wireless light is on (white) when your computer is on. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is white, at least one wireless device is on. If the wireless light is off, all wireless devices are off. NOTE: On some models, the wireless light is amber when all wireless devices are off. Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off all the wireless devices simultaneously. Connecting to a wireless network 17 Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls:
1. From the Start screen, type control panel, and then select Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select Network and Internet, and then select Network and Sharing Center. 2. For more information, see the information provided in Help and Support. From the Start screen, type help, and then select Help and Support. Connecting to a WLAN NOTE: When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service. To connect to a WLAN, follow these steps:
1. Be sure that the WLAN device is on. On select models, if the device is on, the wireless light is white. If the wireless light is off, press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. 3. 4. 5. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the display to reveal the charms. Select Settings, and then click the network status icon. Select your WLAN from the list. Click Connect. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and then click Next to complete the connection. NOTE:
If no WLANs are listed, you may be out of range of a wireless router or access point. NOTE:
If you do not see the WLAN you want to connect to, from the Windows desktop, right-click the network status icon, and then select Open Network and Sharing Center. Click Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. Follow the on-screen instructions to complete the connection. 6. After the connection is made, place the mouse pointer over the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. 18 Chapter 3 Connecting to a network Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use WWANs to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider
(called a mobile network operator), which in most cases is a cellular phone network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage. When used with a mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send email, or connect to your corporate network whether you are on the road or outside the range of Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service.The serial number is printed on a label located on the bottom of your computer. Some mobile network operators require the use of a subscriber identity module (SIM) card. A SIM card contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM card that is preinstalled in the battery bay or in a SIM slot. If the SIM card is not preinstalled, it may be included with the HP Mobile Broadband documents provided with your computer, or the mobile network operator may provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband documents included with your computer. Using HP DataPass (select models only) HP DataPass provides access to Mobile Broadband with no annual contracts, no credit card, and no overage fees. With HP DataPass, you simply turn on the device, register, and connect. HP DataPass includes a monthly data package with purchase of the device. For more information, go to http://www.hp.com/go/hpdatapass. Inserting and removing a SIM card (select models only) CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM card. To insert a SIM card, follow these steps:
1. 2. 3. 4. Shut down the computer. Close the display. Disconnect all external devices connected to the computer. Unplug the power cord from the AC outlet. Connecting to a wireless network 19 5. Insert the SIM card into the SIM slot located on the right side of the computer, and then gently push the SIM card into the slot until it is firmly seated. NOTE: The SIM card in your computer may look slightly different from the illustration in this section. Reconnect external power. Reconnect external devices. Turn on the computer. 6. 7. 8. To remove a SIM card, press in on the SIM card, and then remove it from the slot. Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:
Computers (desktop, notebook) Phones (cellular, cordless, smartphone) Imaging devices (printer, camera) Audio devices (headset, speakers) Mouse External keyboard Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help. Connecting to a wired networkLAN (select models only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office. Connecting to a LAN requires an 8-pin, RJ-45 (network) cable and a network jack on the computer. To connect the network cable, follow these steps:
1. Plug the network cable into the network jack (1) on the computer. 20 Chapter 3 Connecting to a network 2. Plug the other end of the network cable into a network wall jack (2) or router. If the network cable contains noise suppression circuitry (3), which prevents interference from NOTE:
TV and radio reception, orient the circuitry end of the cable toward the computer. Sharing data and drives and accessing software When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Computers connected to the network can exchange software and data with each other. For more information about sharing files, folders, or drives, see the information provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared. Sharing data and drives and accessing software 21 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, or TV, or speakers and headphones. Using a webcam Your computer has an integrated webcam that records video and captures photographs. Some models may allow you to video conference and chat online using streaming video. To start the webcam or 3D camera, from the Start screen, type camera, and then select Camera from the list of applications. Using audio B&O Play audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a clear sound. You can experience B&O Play through the computers internal speakers, through external speakers connected to a USB port, or through audio headphones connected to the headphone jack. Accessing audio control panel Use B&O Play Audio Control Panel to view and manually control audio and bass settings. 1. From the Start screen, type Control Panel, select Control Panel, select Hardware and Sound, and then select B&O Play Control Panel.
- or -
From the Windows desktop, right-click the Start button, and then select Control Panel. Select Hardware and Sound, and then select B&O Play Control Panel. 2. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out
(headphone) jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HDMI audio on page 24. Before connecting speakers, lower the volume setting. Connecting headphones WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document, from the Start screen, type support, and then select the HP Support Assistant app. You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in
(microphone) combo jack on your computer. 22 Chapter 4 Enjoying entertainment features To connect wireless headphones to your computer, follow the device manufacturer's instructions. Connecting a microphone To record audio, connect a microphone to the microphone jack on the computer. For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. Connecting headsets WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document, from the Start screen, type support, and then select the HP Support Assistant app. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-
out (headphone)/audio-in (microphone) jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your video features, refer to Help and Support. Connecting video devices using an HDMI cable (select models only) NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions:
1. Connect one end of the HDMI cable to the HDMI port on the computer. Using video 23 2. 3. Connect the other end of the cable to the high-definition TV or monitor. Press f4 to alternate the computer screen image between 4 display states:
PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE:
For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. On the Playback tab, select the name of the digital output device. Click Set Default, and then click OK. 2. 3. To return the audio stream to the computer speakers:
1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. On the Playback tab, click Speakers. Click Set Default, and then click OK. 2. 3. Discovering and connecting to Miracast-compatible wireless displays (select models only) To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow the steps below. 24 Chapter 4 Enjoying entertainment features To open Miracast:
Point to the upper-right or lower-right corner of the Start screen to display the charms, click Devices, click Project, and then follow the on-screen instructions. or On select computer models, from the Start screen, click the HP Quick Access to Miracast icon, and then follow the on-screen instructions. NOTE: To learn what type of display you have (Miracast-compatible or Intel WiDi), refer to the documentation that came with your TV or secondary display device. Discovering and connecting to Intel WiDi certified displays (select Intel models only) Use Intel WiDi to wirelessly project individual files such as photos, music, or videos, or to duplicate your entire computer screen to a TV or a secondary display device. Intel WiDi, a premium Miracast solution, makes it easy and seamless to pair your secondary display device;
provides for full-screen duplication; and improves speed, quality, and scaling. Intel WiDi Media Share (select models only) enables easy multitasking and provides tools to select and flick individual media files to your secondary display device. To connect to Intel WiDi certified displays:
Point to the upper-right or lower-right corner of the Start screen to display the charms, click Devices, click Project, and then follow the onscreen instructions. To open Intel WiDi from the Start screen:
Type Intel WiDi and then click Intel Widi. To open Intel WiDi Media Share from the Start screen:
Type Intel WiDi Media Share and then click Intel WiDi Media Share. Using video 25 5 Navigating the screen To quickly return to the Start screen, press the Windows key on a keyboard or the Windows button on the right side of the computer. You can navigate the computer screen in the following ways:
Touch gestures Keyboard and optional mouse (purchased separately) NOTE: An external USB mouse (purchased separately) can be connected to a USB ports on the computer. Using the TouchPad and touch screen gestures The TouchPad helps you navigate the computer screen and control the pointer using simple touch gestures. To navigate the touchscreen, you can use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse. You can also customize gestures and view demonstrations of how they work. From the Start screen, type control panel, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. NOTE: Most of the gestures shown here can be used on either the TouchPad or touchscreen. TouchPad gestures are not supported in all apps. Tap Use the tap/double-tap gesture to select or open an item on the screen. Point to an item on the screen, and then tap one finger on the TouchPad zone select it. Double-tap an item to open it. Two-finger scroll Use the two-finger scroll gesture to move up, down, or sideways on a page or image. Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. 26 Chapter 5 Navigating the screen Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers together. Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers apart. Two-finger click Use the two-finger click gesture to open the menu for an object on the screen. NOTE: The two-finger click performs the same function as right-clicking with the mouse. Place two fingers on the TouchPad zone and press down to open the options menu for the selected object. Using the TouchPad and touch screen gestures 27 Rotating (select models only) Rotating allows you to turn items such as photos. Place two separated fingers on the TouchPad zone. Move both fingers in an arching motion while maintaining uniform separation. A clockwise arching motion initiates a right rotation and a counter-
clockwise motion initiates a left rotation. NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate may not be functional for all apps. One-finger slide (touch screen only) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. To drag, press and hold an object, and then drag the object to move it. Using the keyboard and optional mouse The keyboard and mouse allow you to type, select items, scroll and to perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions. 28 Chapter 5 Navigating the screen on a keyboard or the Windows button TIP: The Windows key on the right side of the computer allow you to quickly return to the Start screen from an open app or the Windows desktop. Press the button or key again to return to the previous screen. NOTE: Depending on the country or region, your keyboard may have different keys and keyboard functions than those discussed in this section. Using the keyboard and optional mouse 29 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Initiating and exiting Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state is automatically initiated after a period of inactivity. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Manually initiating and exiting Sleep on page 31. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Manually initiating and exiting Hibernation
(select models only) on page 31. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate the Sleep state while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Sleep state or in the Hibernation state. 30 Chapter 6 Managing power Manually initiating and exiting Sleep You can initiate Sleep in any of the following ways:
Close the display. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the screen to reveal the charms. Click Settings, click the Power icon, and then click Sleep. You can exit Sleep in any of the following ways:
Briefly press the power button. If the computer is closed, raise the display. Press a key on the keyboard. When the computer exits Sleep, the power lights turn on and your work returns to the screen. NOTE:
before your work returns to the screen. If you have set a password to be required on exiting Sleep, you must enter your Windows password Manually initiating and exiting Hibernation (select models only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. From the Start screen, type power options, and then select Power options. or From the Windows desktop, right-click the Start button, and then click Power Options. In the left pane, click Choose what the power button does. Click Change Settings that are currently unavailable. In the When I press the power button area, select Hibernate. Click Save changes. 2. 3. 4. 5. To exit Hibernation:
Briefly press the power button. When the computer exits Hibernation, the power lights turn on and your work returns to the screen. NOTE:
password before your work returns to the screen. If you have set a password to be required on exiting Hibernation, you must enter your Windows Setting password protection on wakeup (exiting Sleep or Hibernation) To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:
1. From the Start screen, type power options, and then select Power options. or From the Windows desktop, right-click the Start button, and then click Power Options. In the left pane, click Require a password on wakeup. Click Change Settings that are currently unavailable. 2. 3. Initiating and exiting Sleep and Hibernation 31 4. Click Require a password (recommended). NOTE:
If you need to create a user account password or change your current user account password, click Create or change your user account password, and then follow the on-screen instructions. If you do not need to create or change a user account password, go to step 5. 5. Click Save changes. Using the power meter and power settings The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. To view the percentage of remaining battery charge and the current power plan, place the mouse pointer over the power meter icon. To use Power Options, click the power meter icon and select an item from the list. From the Start screen, you can also type power options, and then select Power Options. Different power meter icons indicate whether the computer is running on battery or external power. Placing the mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level. Running on battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is off and unplugged from external power, the battery in the computer slowly discharges. The computer will display a message when the battery reaches a low or critical battery level. Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors. Factory-sealed battery To monitor the status of the battery, or if the battery is no longer holding a charge, run Battery Check in the HP Support Assistant app. 1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. Select Battery and performance. If Battery Check indicates that your battery should be replaced, contact support. 2. The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Finding battery information To access battery information:
1. From the Start screen, type support, and then select the HP Support Assistant app. or 32 Chapter 6 Managing power From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. Select Battery and Performance. 2. HP Support Assistant provides the following tools and information about the battery:
Battery Check Information about battery types, specifications, life cycles, and capacity Conserving battery power To conserve battery power and maximize battery life:
Lower the brightness of the display. Select the Power saver setting in Power Options. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low or critical battery level, the following behavior occurs:
The battery light (select models only) indicates a low or critical battery level. or The power meter icon on the Windows desktop shows a low or critical battery notification. NOTE:
settings on page 32. For additional information about the power meter, see Using the power meter and power The computer takes the following actions for a critical battery level:
If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state, and then shuts down and loses any unsaved information. If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation. Resolving a low battery level Resolving a low battery level when external power is available Connect one of the following to the computer and to external power:
AC adapter Optional docking or expansion device Optional power adapter purchased as an accessory from HP Running on battery power 33 Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation 1. 2. Connect the AC adapter to the computer and to external power. Exit Hibernation by pressing the power button. Running on AC power For information about connecting to AC power, refer to the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to AC power with an approved AC adapter or an optional docking/expansion device. WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. Connect the computer to AC power under any of the following conditions:
WARNING! Do not charge the computer battery while you are aboard aircraft. When charging or calibrating a battery When installing or modifying system software When writing information to a disc (select models only) When running Disk Defragmenter on computers with internal hard drives When performing a backup or recovery When you connect the computer to AC power:
The battery begins to charge. The screen brightness increases. The power meter icon on the Windows desktop changes appearance. When you disconnect AC power:
The computer switches to battery power. The screen brightness automatically decreases to save battery life. The power meter icon on the Windows desktop changes appearance. 34 Chapter 6 Managing power Troubleshooting power problems Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power:
The computer does not turn on. The display does not turn on. The power lights do not turn on. To test the AC adapter:
1. 2. 3. Shut down the computer. Connect the AC adapter to the computer, and then plug it into an AC outlet. Turn on the computer. If the power lights turn on, the AC adapter is working properly. If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to be sure that the connections are secure. If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced. Contact support for information about obtaining a replacement AC power adapter. Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions:
When you need to access components inside the computer When you are connecting an external hardware device that does not connect to a USB or video port When the computer will be unused and disconnected from external power for an extended period Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command. NOTE:
pressing the power button. If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly 1. 2. 3. Save your work and close all open programs. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the screen to reveal the charms. Click Settings, click the Power icon, and then click Shut down. or Right-click the Start button in the lower-left corner of the screen, select Shut down or sign out, and then select Shut down. Shutting down (turning off) the computer 35 If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:
Press ctrl+alt+delete, click the Power icon, and then select Shut Down. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power. 36 Chapter 6 Managing power 7 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup. Using Disk Defragmenter HP recommends using Disk Defragmenter to defragment your hard drive at least once a month. NOTE:
It is not necessary to run Disk Defragmenter on solid-state drives. To run Disk Defragmenter:
1. 2. Connect the computer to AC power. From the Start screen, type defragment, and then select Defragment and optimize your drives. Follow the on-screen instructions. 3. For additional information, access the Disk Defragmenter software Help. Using Disk Cleanup Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently. To run Disk Cleanup:
1. From the Start screen, type disk, and then select one of the following:
Free up disk space on this PC Uninstall apps to free up disk space Free up disk space by deleting uncessary files 2. Follow the on-screen instructions. Using HP 3D DriveGuard (select models only) HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of the following conditions:
You drop the computer. You move the computer with the display closed while the computer is running on battery power. A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation. Improving performance 37 NOTE: Because solid state drives (SSDs) lack moving parts, HP 3D DriveGuard is unnecessary. NOTE: A hard drive in a primary hard drive bay or a secondary hard drive bay is protected by HP 3D DriveGuard. A hard drive installed in an optional docking device or connected to a USB port is not protected by HP 3D DriveGuard. For more information, see the HP 3D DriveGuard software Help. Identifying HP 3D DriveGuard status The hard drive light on the computer changes color to show that the drive is parked. To determine whether the drive is currently protected or whether it is parked, view the icon on the Windows desktop in the notification area, at the far right of the taskbar, or in the Mobility Center. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues and bring new features and options to your computer. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notifications when updates become available. If you would like to update your programs and drivers, follow these instructions:
1. From the Start screen, type support, and then select the HP Support Assistant app.
-or-
From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. Click Updates and tune-ups, and then click Check for HP updates now. Follow the on-screen instructions. 2. 3. Cleaning your computer Use the following products to safely clean your computer:
Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, disposable wipes, which come in a variety of brands) Alcohol-free glass-cleaning fluid Solution of water and mild soap Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Static-free cloth wipes CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches. 38 Chapter 7 Maintaining your computer Cleaning procedures Follow the procedures in this section to safely clean your computer. WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is on. 1. 2. 3. CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on any computer surface. Liquids dripped on the surface can permanently damage internal components. Turn off the computer. Disconnect AC power. Disconnect all powered external devices. Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that a display is dry before you close the computer. Cleaning the sides or cover To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously, or use an acceptable disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris. Cleaning the TouchPad, keyboard, or mouse (select models only) WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys. To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe. To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of compressed air with a straw extension. Traveling with or shipping your computer If you have to travel with or ship your computer, follow these tips to keep your equipment safe. Prepare the computer for traveling or shipping:
Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards. Turn off and then disconnect all external devices. Shut down the computer. Take along a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. Traveling with or shipping your computer 39 CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline. If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a wireless device in your computer, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:
Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 40 Chapter 7 Maintaining your computer 8 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. IMPORTANT: Some security features listed in this chapter may not be available on your computer. Using passwords A password is a group of characters that you choose to secure your computer information and to protect online transactions. Several types of passwords can be set. For example, when you set up your computer for the first time, you were asked to create a user password to secure your computer. Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on your computer. You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows security feature. To create and save passwords, use the following tips:
To reduce the risk of being locked out of the computer, record each password and store it in a secure place away from the computer. Do not store passwords in a file on the computer. When creating passwords, follow requirements set by the program. Change your passwords at least every 3 months. An ideal password is long and has letters, punctuation, symbols, and numbers. Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords:
From the Start screen, type support, and then select the HP Support Assistant app.
-or-
From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. Setting Windows passwords Password User password Administrator password Function Protects access to a Windows user account. Protects administrator-level access to computer contents. NOTE: This password cannot be used to access Setup Utility
(BIOS) contents. Using passwords 41 Setting Setup Utility (BIOS) passwords Password Administrator password Power-on password Function Must be entered each time you access Setup Utility (BIOS). If you forget your administrator password, you cannot access Setup Utility (BIOS). Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):
CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE:
steps. If your tablet has a keyboard base, connect the tablet to the keyboard base before beginning these 1. Start Setup Utility (BIOS):
Computers or tablets with keyboards:
Turn on or restart the computer, quickly press esc, and then press f10. Tablets without keyboards:
1. Turn on or restart the tablet, and then quickly hold down the volume down button.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button. Tap f10. 2. Select Security, and then follow the on-screen instructions. 2. Your changes take effect when the computer restarts. Using Internet security software When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats. To help protect your computer, Internet security software that includes antivirus and firewall features may be preinstalled on your computer as a trial offer. To provide ongoing protection against newly discovered viruses and other security risks, security software must be kept up to date. It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer. Using antivirus software Computer viruses can disable programs, utilities, or the operating system, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. 42 Chapter 8 Securing your computer and information An antivirus program may be preinstalled on your computer. It is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer. For more information about computer viruses, from the Start screen, type support, and then select the HP Support Assistant app. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be software you install on your computer and/or network, or it can be a combination of both hardware and software. There are two types of firewalls to consider:
Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. For more information, see Updating programs and drivers on page 38. Installing critical security updates CAUTION: Microsoft sends out alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. You can install these updates manually or automatically. To view or change the settings:
1. From the Start screen, type control panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select System and Security, select Windows Update, select Change settings, and then follow the on-
screen instructions. 2. Using HP Touchpoint Manager (select models only) HP Touchpoint Manager is a cloud-based IT solution that enables businesses to effectively manage and secure their company assets. HP Touchpoint Manager helps protect devices against malware and other attacks, monitors device health, and enables customers to reduce time spent solving end-user device and security issues. Customers can quickly download and install the software, which is highly cost effective relative to traditional in-house solutions. Installing software updates 43 Securing your wireless network When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. Backing up your software applications and information Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure. For more information, see Backing up, restoring, and recovering on page 50. Using an optional security cable lock A security cable lock, which is purchased separately, is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Security cable locks are only one of several methods that should be employed as part of a complete security solution to help maximize theft protection. The security cable slot on your computer may look slightly different from the illustration in this section. For the location of the security cable slot on your computer, see Getting to know your computer on page 4. 1. 2. 3. Loop the security cable lock around a secured object. Insert the key (1) into the security cable lock (2). Insert the security cable lock into the security cable slot on the computer (3), and then lock the security cable lock with the key. 4. Remove the key and keep it in a safe place. 44 Chapter 8 Securing your computer and information 9 Using Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory. Starting Setup Utility (BIOS) CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE:
steps in this chapter. If your tablet has a keyboard base, connect the tablet to the keyboard base before beginning the Computers or tablets with keyboards:
Turn on or restart the computer, quickly press esc, and then press f10. Tablets without keyboards:
1. Turn on or restart the tablet, and then quickly hold down the volume down button.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button. Tap f10. 2. Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than the one currently installed on the computer, you need to know the version of the system BIOS that is installed. BIOS version information (also known as ROM date and System BIOS) can be revealed from the Start screen by typing support, selecting the HP Support Assistant app, selecting My computer, and then selecting System information, or by using Setup Utility (BIOS). 1. 2. 3. Start Setup Utility (BIOS) (see Starting Setup Utility (BIOS) on page 45). Select Main, and then make note of your BIOS version. Select Exit, select Exit Discarding Changes, and then follow the on-screen instructions. Starting Setup Utility (BIOS) 45 Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. NOTE:
software updates, especially system BIOS updates. If your computer is connected to a network, consult the network administrator before installing any 1. 2. 3. 4. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop. Click Updates and tune-ups, and then click Check for HP updates now. Follow the on-screen instructions. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. If the update is more recent than your BIOS, make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. Follow the on-screen instructions to download your selection to the hard drive. If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. b. BIOS installation procedures vary. Follow any instructions that appear on the screen after the download is complete. If no instructions appear, follow these steps:
1. From the Start screen, type file, and then select File Explorer. or From the Windows desktop, right-click the Start button, and then select File Explorer. Click your hard drive designation. The hard drive designation is typically Local Disk (C:). Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the update. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. Complete the installation by following the on-screen instructions. 2. 3. 4. 5. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. 46 Chapter 9 Using Setup Utility (BIOS) Synchronizing a tablet and keyboard (select models only) When you attach a tablet to the keyboard and restart the computer, the BIOS checks to see if the Embedded Controller firmware on the keyboard needs to be synchronized. If so, BIOS will start the synchronization. If the synchronization is interrupted, a notification screen displays for 10 seconds before the tablet restarts and attempts to synchronize again. NOTE: The Embedded Controller firmware will synchronize ONLY if the tablet or keyboard battery is more than 50% charged, or if your tablet is connected to AC power. Synchronizing a tablet and keyboard (select models only) 47 10 Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) utility that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. NOTE: To start the Setup Utility, your computer must be In notebook mode and you must use the keyboard attached to your notebook. The on-screen keyboard, which displays in tablet mode, cannot access the Setup Utility. To start HP PC Hardware Diagnostics (UEFI):
1. Start Setup Utility:
Computers or tablets with keyboards:
Turn on or restart the computer, quickly press esc. Tablets without keyboards:
Turn on or restart the tablet, and then quickly hold down the volume down button.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button. 2. Press or tap f2. The BIOS searches 3 places for the diagnostic tools, in the following order:
a. Connected USB drive NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 48. b. c. Hard drive BIOS 3. When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic test you want to run, and then follow the on-screen instructions. NOTE:
If you need to stop a diagnostic test, press or tap esc. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device NOTE:
Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English only. There are two options to download HP PC Hardware Diagnostics to a USB device:
Option 1: HP PC Diagnostics homepage Provides access to the latest UEFI version 1. 2. Go to http://hp.com/go/techcenter/pcdiags. Click the UEFI Download link, and then select Run. 48 Chapter 10 Using HP PC Hardware Diagnostics (UEFI) Option 2: Support and Drivers pagesProvide downloads for a specific product for earlier and later versions 1. 2. 3. Go to http://www.hp.com. Point to Support, located at the top of the page, and then click Download Drivers. In the text box, enter the product name, and then click Go. or Click Find Now to let HP automatically detect your product. Select your computer model, and then select your operating system. In the Diagnostic section, click HP UEFI Support Environment. or Click Download, and then select Run. 4. 5. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 49 11 Backing up, restoring, and recovering This chapter provides information about the following processes. The information in the chapter is standard procedure for most models. Creating recovery media and backups Restoring and recovering your system For additional information, refer to Help and Support. From the Start screen, type help, and then select the Help and Support. IMPORTANT:
tablet battery must have at least 70% battery power remaining before starting the recovery process. If you will be using F11 startup recovery or USB media recovery to recover your system, the Creating recovery media and backups The following methods of creating recovery media and backups are available on select models only. Choose the available method according to your computer model. Use HP Recovery Manager after you successfully set up the computer to create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For information on creating recovery media, see Creating HP Recovery media (select models only) on page 50. For information on the recovery options that are available using the recovery media, see Recovering using HP Recovery Manager on page 52. Use Windows tools to create system restore points and create backups of personal information. For more information, see Using Windows tools on page 51. NOTE:
If storage is 32 GB or less, Microsoft System Restore is disabled by default. Creating HP Recovery media (select models only) If your computer does not list a Create recovery media option, you can obtain recovery media IMPORTANT:
for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. HP Recovery Manager is a software program that allows you to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and the software programs installed at the factory and then configures the settings for the programs. HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive. Only one set of recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. HP Recovery Manager examines the computer and determines the required storage capacity for the media that will be required. 50 Chapter 11 Backing up, restoring, and recovering To create recovery discs, your computer must have an optical drive with DVD writer capability, and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CDRW, DVDRW, double-layer DVDRW, or BD-RE (rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high-quality blank USB flash drive. If your computer does not include an integrated optical drive with DVD writer capability, but you would like to create DVD recovery media, you can use an external optical drive (purchased separately) to create recovery discs, or you can obtain recovery discs for your computer from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. If you use an external optical drive, it must be connected directly to a USB port on the computer; the drive cannot be connected to a USB port on an external device, such as a USB hub. Be sure that the computer is connected to AC power before you begin creating the recovery media. The creation process can take an hour or more. Do not interrupt the creation process. If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue, and the remaining discs will be burned. To create HP Recovery media:
IMPORTANT:
beginning these steps (select models only). For tablets with a detachable keyboard, connect the keyboard to the keyboard dock before 1. From the Start screen, type recovery, and then select HP Recovery Manager. Select Create recovery media, and then follow the on-screen instructions. 2. If you ever need to recover the system, see Recovering using HP Recovery Manager on page 52. Using Windows tools You can create system restore points and create backups of personal information using Windows tools. If storage is 32 GB or less, Microsoft System Restore is disabled by default. For more information NOTE:
and steps, see Help and Support. From the Start screen, type help, and then select Help and Support. Restore and recovery There are several options for recovering your system. Choose the method that best matches your situation and level of expertise:
IMPORTANT: Not all methods are available on all models. Windows offers several options for restoring from backup, refreshing the computer, and resetting the computer to its original state. For more information see Help and Support. From the Start screen, type help, and then select Help and Support. If you need to correct a problem with a preinstalled application or driver, use the Reinstall drivers and/
or applications option of HP Recovery Manager to reinstall the individual application or driver. Using Windows tools 51 From the Start screen, type recovery, select HP Recovery Manager, select Reinstall drivers and/or applications, and then follow the on-screen instructions. On select models, if you want to reset your computer using a minimized image, you can choose the HP Minimized Image Recovery option from the HP Recovery partition or HP Recovery media. Minimized Image Recovery installs only drivers and hardware-enabling applications. Other applications included in the image continue to be available for installation through the Reinstall drivers and/or applications option in HP Recovery Manager. For more information, see Recovering using HP Recovery Manager on page 52. If you want to recover the Windows partition to original factory content, you can choose the System Recovery option from the HP Recovery partition (select models only) or use the HP Recovery media. For more information, see Recovering using HP Recovery Manager on page 52. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 50. On select models, if you want to recover the computer's original factory partition and content , or if you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media. For more information, see Recovering using HP Recovery Manager on page 52. On select models, if you want to remove the recovery partition to reclaim hard drive space, HP Recovery Manager offers the Remove Recovery Partition option. For more information, see Removing the HP Recovery partition (select models only) on page 54. Recovering using HP Recovery Manager HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you either created or that you obtained from support, or by using the HP Recovery partition (select models only). If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 50. What you need to know before you get started HP Recovery Manager recovers only software that was installed at the factory. For software not provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer. IMPORTANT: Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues. HP Recovery media must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 50. To use the Factory Reset option (select models only), you must use HP Recovery media. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 50. If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you want to retain. Using HP Recovery media, you can choose from one of the following recovery options:
NOTE: Only the options available for your computer display when you start the recovery process. 52 Chapter 11 Backing up, restoring, and recovering System RecoveryReinstalls the original operating system, and then configures the settings for the programs that were installed at the factory. Minimized Image Recovery (select models only)Reinstalls the operating system and all hardware-
related drivers and software, but not other software applications. Factory ResetRestores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory. The HP Recovery partition (select models only) allows System Recovery and Minimized Image Recovery
(select models only). Using the HP Recovery partition (select models only) The HP Recovery partition allows you to perform a system recovery or minimized image recovery (select models only) without the need for recovery discs or a recovery USB flash drive. This type of recovery can be used only if the hard drive is still working. To start HP Recovery Manager from the HP Recovery partition:
IMPORTANT:
beginning these steps (select models only). For tablets with a detachable keyboard, connect the keyboard to the keyboard dock before 1. 2. 3. From the Start screen, type recovery, select Recovery Manager, and then select HP Recovery Environment.
- or-
Press f11 while the computer boots, or press and hold f11 as you press the power button. Select Troubleshoot from the boot options menu. Select Recovery Manager, and then follow the on-screen instructions. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. 1. 2. If possible, back up all personal files. Insert the HP Recovery media, and then restart the computer. NOTE:
boot order. See Changing the computer boot order on page 53. If the computer does not automatically restart in HP Recovery Manager, change the computer 3. Follow the on-screen instructions. Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection for an optical drive or a USB flash drive. To change the boot order:
IMPORTANT:
beginning these steps (select models only). For tablets with a detachable keyboard, connect the keyboard to the keyboard dock before Restore and recovery 53 1. 2. Insert the HP Recovery media. Start Computer Setup:
For computers or tablets with keyboards attached:
Turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options. For computers or tablets without keyboards attached:
Turn on or restart the computer, quickly press the volume down button, and then tap f9 for boot options.
- or -
Turn on or restart the computer, quickly press the Windows button, and then tap f9 for boot options. 3. 4. Select the optical drive or USB flash drive from which you want to boot. Follow the on-screen instructions. Removing the HP Recovery partition (select models only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you can no longer use the Windows Refresh option or the Windows option to remove everything and reinstall Windows. In addition, you will not be able to perform System Recovery or Minimized Image Recovery from the HP Recovery partition. So before you remove the Recovery partition, create HP Recovery media; see Creating HP Recovery media (select models only) on page 50. Follow these steps to remove the HP Recovery partition:
1. From the Start screen, type recovery, and then select HP Recovery Manager. Select Remove Recovery Partition, and then follow the on-screen instructions. 2. 54 Chapter 11 Backing up, restoring, and recovering 12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source that is supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. Operating voltage and current varies by platform. Input power Rating Operating voltage and current DC plug of external HP power supply 19.5 V dc @ 2.31 A 45 W 19.5 V dc @ 3.33 A 65 W NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The computer operating voltage and current can be found on the system regulatory label. Operating environment Factor Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Metric U.S. 5C to 35C
-20C to 60C 10% to 90%
5% to 95%
41F to 95F
-4F to 140F 10% to 90%
5% to 95%
Operating Nonoperating
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft Input power 55 13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:
If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface. If you remove a component, place it in an electrostatic-safe container. 56 Chapter 13 Electrostatic Discharge 14 Accessibility HP designs, produces, and markets products and services that can be used by everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive devices. Supported assistive technologies HP products support a wide variety of operating system assistive technologies and can be configured to work with additional assistive technologies. Use the Search feature on your device to locate more information about assistive features. NOTE:
support for that product. For additional information about a particular assistive technology product, contact customer Contacting support We are constantly refining the accessibility of our products and services and welcome feedback from users. If you have an issue with a product or would like to tell us about accessibility features that have helped you, please contact us at (888) 259-5707, Monday through Friday, 6 A.M. to 9 P.M. Mountain Time. If you are deaf or hard-of-hearing and use TRS/VRS/WebCapTel, contact us if you require technical support or have accessibility questions by calling (877) 656-7058, Monday through Friday, 6:00 a.m. to 9:00 p.m. Mountain Time. Supported assistive technologies 57 Index A AC adapter 6 AC adapter, testing 35 accessibility 57 action keys 13 identifying 13 airplane mode key 14 antivirus software, using 42 audio control panel, accessing 22 audio, using 22 audio-out (headphone)/audio-in
(microphone) jack, identifying 5 B backing up software and information 44 backups 50 battery conserving power 33 discharging 33 factory-sealed 32 finding information 32 low battery levels 33 resolving low battery level 33, 34 battery information, finding 32 battery power 32 best practices 1 BIOS determining version 45 downloading an update 46 starting the Setup Utility 45 updating 45 Bluetooth device 17, 20 Bluetooth label 16 boot order changing 53 bottom 16 buttons left TouchPad 11 power 6 right TouchPad 11 caring for your computer 38 cleaning your computer 38 components bottom 15 display 7 left side 6 right side 5 top 11 connecting to a WLAN 18 connector, power 6 corporate WLAN connection 18 critical battery level 33 critical security updates, installing 43 D Disk Cleanup software 37 Disk Defragmenter software 37 E electrostatic discharge 56 esc key, identifying 13 external AC power, using 34 F firewall software 43 fn key, identifying 13 H hard drive HP 3D DriveGuard 37 hard drive light 7 HDMI port connecting 23 identifying 5 HDMI, configuring audio 24 headphones, connecting 22 headsets, connecting 23 Hibernation exiting 31 initiated during critical battery level 33 initiating 31 C caps lock light, identifying 12 high-definition devices, connecting 23, 24 58 Index HP 3D DriveGuard 37 using 37 HP Apps Store, visiting 1 HP DataPass 19 HP Mobile Broadband 19 HP Mobile Broadband, disabled 19 HP PC Hardware Diagnostics (UEFI) downloading 48 HP Recovery Manager correcting boot problems 53 starting 53 HP Recovery media creating 50 recovery 53 HP Recovery partition recovery 53 removing 54 HP resources 2 HP Touchpoint Manager 43 I initiating Sleep and Hibernation 30 input power 55 installing critical security updates 43 optional security cable lock 44 Intel WiDi certified displays, connecting 25 internal display switch, identifying 8 internal microphones, identifying 8 Internet security software, using 42 J jacks audio-out (headphone)/audio-in
(microphone) 5 network 5 RJ-45 (network) 5 K keys action 13 airplane mode 14 esc 13 fn 13 Windows 13 L labels Bluetooth 16 Microsoft Certificate of Authenticity 16 regulatory 16 serial number 15 service 15 wireless certification 16 WLAN 16 lights AC adapter 6 caps lock 12 hard drive 7 mute 12 RJ-45 (network) status 5 locating information hardware 4 software 4 low battery level 33 M maintenance Disk Cleanup 37 Disk Defragmenter 37 updating programs and drivers 38 memory card reader, identifying 7 memory card, identifying 7 microphone, connecting 23 minimized image recovery 53 minimized image, creating 52 Miracast 24 mouse, external setting preferences 26 mute light, identifying 12 N network jack, identifying 5 O one-finger slide touch screen gesture 28 operating environment 55 original system recovery 52 P passwords Setup Utility (BIOS) 42 Windows 41 ports HDMI 5, 23 Miracast 24 USB 2.0 7 USB 3.0 5 power AC 34 battery 32 power button, identifying 6 power connector, identifying 6 power meter, using 32 power settings, using 32 product name and number, computer 15 public WLAN connection 18 R recover options 51 recovery discs 51, 53 HP Recovery Manager 52 media 53 starting 53 supported discs 51 system 52 USB flash drive 53 using HP Recovery media 51 recovery media creating 50 creating using HP Recovery Manager 51 recovery partition removing 54 regulatory information regulatory label 16 wireless certification labels 16 RJ-45 (network) jack, identifying 5 RJ-45 (network) status lights, identifying 5 rotating TouchPad gesture 28 S security cable lock, installing 44 security cable slot, identifying 6 serial number 15 serial number, computer 15 service labels, locating 15 setting password protection on wakeup 31 Setup Utility (BIOS) passwords 42 shipping the computer 39 shutdown 35 SIM card inserting 19 SIM slot, identifying 5 Sleep exiting 31 initiating 31 Sleep and Hibernation initiating 30 slots memory card reader 7 security cable 6 SIM 5 software Disk Cleanup 37 Disk Defragmenter 37 software updates, installing 43 speakers connecting 22 identifying 15 supported discs, recovery 51 system recovery 52 system restore point creating 51 system restore point, creating 50 T tap TouchPad and touch screen gesture 26 testing an AC adapter 35 touch screen gesture, one-finger slide 28 TouchPad buttons 11 using 26 TouchPad and touch screen gestures tap 26 two-finger click 27 two-finger pinch/zoom 27 two-finger scroll 26 TouchPad gestures rotating 28 TouchPad zone, identifying 11 traveling with the computer 16, 39 Index 59 turning off the computer 35 two-finger click TouchPad and touch screen gesture 27 two-finger pinch/zoom TouchPad and touch screen gesture 27 two-finger scroll TouchPad and touch screen gesture 26 U unresponsive system 35 updating programs and drivers 38 USB 2.0 port, identifying 7 USB 3.0 ports, identifying 5 using external AC power 34 using passwords 41 using the TouchPad 26 V video 23 volume button, identifying 7 W webcam identifying 8 using 22 webcam light, identifying 8 Windows system restore point 50, 51 Windows key, identifying 13 Windows passwords 41 Windows tools using 51 Wireless Assistant software 17 wireless button 17 wireless certification label 16 wireless controls button 17 operating system 17 Wireless Assistant software 17 wireless light 17 wireless network (WLAN) connecting 18 corporate WLAN connection 18 functional range 18 public WLAN connection 18 wireless network, securing 44 WLAN antennas, identifying 8 WLAN device 16 WLAN label 16 WWAN antennas, identifying 8 WWAN device 19 60 Index Regulatory, Safety and Environmental Notices User Guide Copyright 20082011 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. ENERGY STAR is a registered mark owned by the U.S. government. Java is a trademark of Sun Microsystems. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Third Edition: August 2011 First Edition: February 2011 Document Part Number: 653267-003 Table of contents 1 Regulatory notices .......................................................................................................................................... 1 Federal Communications Commission notice ...................................................................................... 2 Modifications ........................................................................................................................ 2 Cables .................................................................................................................................. 2 Declaration of Conformity for products marked with the FCC logo (United States only) ..... 3 Products with wireless LAN devices or HP Mobile Broadband Modules ............................. 3 Brazil notice .......................................................................................................................................... 4 Canada notices .................................................................................................................................... 4 Avis Canadien ...................................................................................................................................... 4 European Union Regulatory notices ..................................................................................................... 4 Products with HP Mobile Broadband Modules .................................................................... 5 Ergonomics notice ............................................................................................................... 6 Germany ............................................................................................................. 6 Japan notices ....................................................................................................................................... 7 Wireless LAN 802.11b devices ............................................................................................ 7 Wireless LAN 802.11g devices ............................................................................................ 7 Bluetooth devices ................................................................................................................ 7 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................... 8 South Korea notice ............................................................................................................................... 8 Mexico notice ....................................................................................................................................... 8 Singapore wireless notice .................................................................................................................... 8 Thailand WWAN wireless notice .......................................................................................................... 9 Taiwan notices ..................................................................................................................................... 9 Wireless LAN 802.11a devices ............................................................................................ 9 Wireless LAN 802.11b devices ............................................................................................ 9 Airline travel notice ............................................................................................................................... 9 User-replaceable battery notices ........................................................................................................ 10 ENERGY STAR compliance .............................................................................................................. 10 Laser compliance ............................................................................................................................... 11 Modem notices ................................................................................................................................... 11 Telecommunications device approvals .............................................................................. 11 U.S. modem statements .................................................................................................... 12 iii U.S. modem declarations .................................................................................................. 13 Canada modem statements ............................................................................................... 15 Japan modem statements ................................................................................................. 15 New Zealand modem statements ...................................................................................... 15 Voice support .................................................................................................... 16 Power cord notice ............................................................................................................................... 16 Japan power cord notice .................................................................................................... 16 DC plug of external HP power supply ................................................................................ 17 Macrovision Corporation notice .......................................................................................................... 17 2 Safety notices ................................................................................................................................................ 18 Heat-related safety warning notice ..................................................................................................... 18 Potential safety conditions notice ....................................................................................................... 18 User-replaceable battery notices ........................................................................................................ 18 Headset and earphone volume level notice ....................................................................................... 19 Power cord notices ............................................................................................................................. 19 Cleaning the keyboard ....................................................................................................................... 19 Travel notice ....................................................................................................................................... 19 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 19 3 Environmental notices ................................................................................................................................. 20 Electronic hardware and battery recycling ......................................................................................... 20 Disposal of waste equipment by users in private households in the European Union ....................... 20 Chemical substances ......................................................................................................................... 21 China material content declarations ................................................................................................... 21 Japan material content declaration .................................................................................................... 23 Mexico Sustainable Energy Use Law ................................................................................................. 24 Turkey EEE regulation ....................................................................................................................... 24 Ukraine Restriction of Hazardous Substances ................................................................................... 24 Perchlorate materialspecial handling may apply ............................................................................ 24 Index ................................................................................................................................................................... 25 iv 1 Regulatory notices This guide provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device such as a wireless LAN (WLAN) network device, choose the procedure below that corresponds to the operating system running on your computer. For Windows XP Professional and Windows XP Home, follow these steps:
1. 2. Select Start > My Computer. If the left pane, select View System Information > Hardware tab > Device Manager. For Windows Vista, follow these steps:
1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. For later Windows operating systems, such as Windows 7, follow these steps:
Select Start > Control Panel > System and Security > Device Manager. For non-Windows operating systems, follow the instructions provided by your operating system to identify a hardware device such as a wireless LAN (WLAN) network device. Regulatory markings for your country or region may be located on the bottom of the product, either under the battery, under a user-removable door (or some other user-accessible location), or on the wireless or modem module. To view the FCC IDs for any radio modules in your notebook (Bluetooth, WLAN, or WWAN), follow these steps:
1. 2. 3. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. Select the System Configuration menu. The FCC IDs are displayed at the bottom of the screen. 1 CAUTION: Devices not for sale or use in the United States may not have an FCC ID. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 2 Chapter 1 Regulatory notices Declaration of Conformity for products marked with the FCC logo
(United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 12 inches: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides. To access the user guides, select Start > Help and Support > User Guides. During normal operation of notebook computers with displays greater than 12 inches: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides. To access the user guides, select Start > Help and Support > User Guides. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. Federal Communications Commission notice 3 Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union Regulatory notices Products bearing the CE marking comply with the following EU Directives:
Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Ecodesign Directive 2009/125/EC where applicable CE compliance of this product is valid if powered with the correct CE-marked AC adapter provided by HP. If this product has wired and/or wireless telecommunications functionality, it also complies with the essential requirements of EU Directive R&TTE Directive 1999/5/EC. Compliance with these directives implies conformity to applicable harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following Web site: www.hp.eu/certificates (type the product number in the search box). The compliance is indicated by one of the following conformity markings placed on the product:
4 Chapter 1 Regulatory notices For non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth, within power class below 10 mW. For EU non-harmonized telecommunications products (if applicable, a 4-digit notified body number is inserted between CE and ! (the exclamation mark). Please refer to the regulatory label provided on the product. The telecommunications functionality of this product may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. The telephone connector (not available for all products) is intended for connection to analog telephone networks. NOTE: For products with wireless LAN devices, some countries may have specific obligations or special requirements about the operation of wireless LAN networks such as indoor use only or restrictions of the channels available. Be sure that the country settings of the wireless network are correct. In France, certain restrictions apply for the 2.4-GHz wireless LAN operation of this product. This product may be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to 13). For outdoor use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 7) may be used. For the latest requirements, see http://www.arcep.fr. The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY. Products with HP Mobile Broadband Modules THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The HP Mobile Broadband Module in your notebook is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. European Union Regulatory notices 5 The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.
*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. This equipment incorporates a radio transmitting device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Ergonomics notice Germany Mobile computers bearing the "GS" approval mark meet the ergonomic requirements and are suitable only for short-time use of VDU tasks. When a mobile computer is used for display work tasks where the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000:2008 This device is intended for use at visual display workplaces in compliance with BildscharbV, only with external keyboard and adequate external monitor. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur which result in reduced readability. Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG
(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000:2008 Das Gert ist fr die Benutzung am Bildschirmarbeitsplatz gem BildscharbV nur mit externer Tastatur und geeignetem Monitor vorgesehen. 6 Chapter 1 Regulatory notices Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. Japan notices Wireless LAN 802.11b devices Wireless LAN 802.11g devices Bluetooth devices Japan notices 7 Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. South Korea notice Mexico notice La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) este equipo puede que no cause interferencia y (2) este equipo debe aceptar cualquier interferencia, incluyendo interferencia que pueda ser causada por la operacin no deseada. Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. 8 Chapter 1 Regulatory notices Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. Taiwan notices Wireless LAN 802.11a devices Wireless LAN 802.11b devices Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Thailand WWAN wireless notice 9 User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general in household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. ENERGY STAR compliance As an ENERGY STAR Partner, Hewlett-Packard Company has followed the EPAs enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR logo are ENERGY STAR qualified per the applicable ENERGY STAR guidelines for energy efficiency. The following logo appears on all ENERGY STAR-qualified computers:
The ENERGY STAR program for computers was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way that products achieve this goal is by using the Microsoft Windows power management feature to reduce power consumption when the product is not in use. The power management feature allows the computer to initiate a low-power or Sleep mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:
Turn off the display after 15 minutes Initiate Sleep after 30 minutes The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. 10 Chapter 1 Regulatory notices Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:
Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:
Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. Laser compliance 11 U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. 12 Chapter 1 Regulatory notices U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:
Modem notices 13 14 Chapter 1 Regulatory notices Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:
New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:
a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. Modem notices 15 c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice 16 Chapter 1 Regulatory notices DC plug of external HP power supply NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The computer operating voltage and current can be found on the system regulatory label. Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Macrovision Corporation notice 17 2 Safety notices Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer: crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. User-replaceable battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. 18 Chapter 2 Safety notices Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2. If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1. Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. Headset and earphone volume level notice 19 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users in private households in the European Union This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service. 20 Chapter 3 Environmental notices Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. China material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Part Name Battery Cables Camera Chassis/Other Flash memory card reader Toxic and Hazardous Substances and Elements Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent Chromium
(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers
(PBDE) X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O Chemical substances 21 Toxic and Hazardous Substances and Elements Part Name Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display
(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent Chromium
(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers
(PBDE) X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment and its amendments. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. 22 Chapter 3 Environmental notices Japan material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. Japan material content declaration 23 Mexico Sustainable Energy Use Law This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). Turkey EEE regulation In Conformity with the EEE regulation EEE Ynetmeliine Uygundur Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
, 3 2008 1057. Perchlorate materialspecial handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. 24 Chapter 3 Environmental notices Index A airline travel notice 9 B battery notice 10, 18, 24 battery recycling 20 Brazil notice 4 C cable grounding notice 19 Canada modem statement 15 Canada notices 4 Canadian French notices 4 China Material Content Declarations 21 D DC plug of external HP power supply notice 17 Declaration of Conformity 3 disposal notices battery 24 battery, user replacement 10 equipment 20 E electronic hardware and battery recycling 20 ENERGY STAR compliance 10 environmental notices 20 equipment disposal notice 20 ergonomics notice 6 European Union notices 4 F Federal Communications Commission cables 2 modifications 2 notice 2 G GS Notice 6 H hardware device, identifying 1 headset and earphone volume level notice 19 J Japan material content declaration 23 Japan modem statement 15 Japan notice 7 Japan power cord notice 16 K keyboard notice 19 L laser safety notice 11 M Macrovision Corporation notice Mexico Sustainable Energy Use 17 Law 24 Mexico wireless notice 8 modem notices 11 modem statements Canada 15 Japan 15 New Zealand 15 U.S. 12 modifications, Federal Communications Commission 2 notices airline travel 9 battery 10, 24 battery, user replacement 18 Brazil 4 Canada 4 Canadian French 4 DC plug of external HP power supply 17 environmental 20 equipment disposal 20 ergonomics 6 European Union 4 Federal Communications Commission 2 headset and earphone volume level 19 Japan 7 Japan power cord 16 keyboard 19 laser safety 11 Macrovision Corporation 17 Mexico 8 modem 11 perchlorate material 24 power cords 16, 19 Singapore 8 South Korea 8 Taiwan 9 Thailand WWAN wireless notice 9 travel 19 Ukraine restriction of hazardous substances 24 N New Zealand modem statement 15 P power cord notice 16, 19 Index 25 R recycling, electronic hardware and battery 20 S Singapore wireless notice 8 South Korea notice 8 T Taiwan notice 9 Thailand WWAN wireless notice travel notice 19 TV tuner, cable grounding notice 9 19 U U.S. modem statement 12 Ukraine restriction of hazardous substances notice 24 V voice support 16 volume level notice, headset and earphone 19 W wireless LAN devices 3 26 Index Informations sur les rglementations, la scurit et les conditions d'utilisation Manuel de l'utilisateur Copyright 2012 Hewlett-Packard Development Company, L.P. Bluetooth est une marque dtenue par son propritaire et utilise sous licence par Hewlett-Packard Company. ENERGY STAR est une marque dpose du gouvernement des tats-Unis. Java est une marque dpose de Sun Microsystems. Microsoft, Windows et Windows Vista sont des marques dposes de Microsoft Corporation aux tats-Unis. Les informations contenues dans ce document peuvent tre modifies sans pravis. Les garanties relatives aux produits et aux services HP sont dcrites dans les dclarations de garantie limite expresse qui les accompagnent. Aucun lment du prsent document ne peut tre interprt comme constituant une garantie supplmentaire. HP ne saurait tre tenu pour responsable des erreurs ou omissions de nature technique ou rdactionnelle qui pourraient subsister dans le prsent document. Troisime dition : septembre 2012 Deuxime dition : juillet 2012 Premire dition : mars 2012 Rfrence du document : 689409-053 propos de ce manuel Ce manuel fournit des informations sur les rglementations, la scurit et les conditions d'utilisation en conformit avec les rglementations amricaines, canadiennes et internationales en matire d'ordinateurs portables, d'ordinateurs de bureau, de clients lgers et de stations de travail personnelles. AVERTISSEMENT ! Le non-respect des instructions expose l'utilisateur des risques potentiellement trs graves. ATTENTION : Le non-respect des instructions prsente des risques, tant pour le matriel que pour les informations qu'il contient. REMARQUE : Le texte ainsi dfini fournit des informations importantes supplmentaires. iii iv propos de ce manuel Sommaire 1 Avis de rglementation sur les ordinateurs portables ................................................................................ 1 Rglementation FCC ............................................................................................................................ 3 Modifications ........................................................................................................................ 3 Cbles .................................................................................................................................. 3 Dclaration de conformit des produits portant le logo FCC (tats-Unis uniquement) ....... 4 Produits avec appareils sans fil LAN ou modules HP Mobile Broadband ........................... 4 Avis pour le Brsil ................................................................................................................................. 5 Avis pour le Canada ............................................................................................................................. 5 Avis pour l'Union europenne .............................................................................................................. 6 Dclaration de conformit .................................................................................................... 6 Produits quips de modules sans fil (EMF) ....................................................... 7 Dclaration relative au rseau tlphonique europen (modem/fax) ................. 7 Avis sur l'ergonomie ............................................................................................ 8 Allemagne (texte en franais) ............................................................. 8 Allemagne (texte en allemand) ........................................................... 8 Avis pour le Japon ................................................................................................................................ 9 Priphriques LAN, priphriques WAN et marques de certification pour les priphriques Bluetooth ..................................................................................................... 10 Avis pour la Core du Sud ................................................................................................................. 10 Avis pour le Mexique .......................................................................................................................... 10 Avis sur les appareils sans fil pour Singapour .................................................................................... 11 Avis sur les appareils sans fil WWAN pour la Thalande ................................................................... 11 Avis pour Tawan ................................................................................................................................ 11 Priphriques WLAN 802.11a ........................................................................................... 11 Priphriques WLAN 802.11b ........................................................................................... 12 Avis sur les utilisations en vol ............................................................................................................. 12 Avis sur les batteries remplaables par l'utilisateur ............................................................................ 12 Conformit ENERGY STAR ............................................................................................................ 12 Conformit du laser ............................................................................................................................ 13 Avis sur les modems .......................................................................................................................... 14 Homologations des priphriques de tlcommunication ................................................. 14 Avis sur les modems pour les tats-Unis .......................................................................... 14 v Dclarations sur les modems pour les tats-Unis ............................................................. 16 Avis sur les modems pour le Canada ................................................................................ 17 Avis sur les modems pour le Japon ................................................................................... 17 Avis sur les modems pour la Nouvelle-Zlande ................................................................ 17 Support vocal .................................................................................................... 18 Avis sur les cordons d'alimentation .................................................................................................... 18 Avis sur les cordons d'alimentation pour le Japon ............................................................. 18 Prise CC de la source d'alimentation externe HP .............................................................. 18 Avis de Macrovision Corporation ........................................................................................................ 19 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles ...................................................................................................................................................... 20 Avis sur les modems .......................................................................................................................... 20 Homologations des priphriques de tlcommunication ................................................. 20 Avis sur les modems pour les tats-Unis .......................................................................... 21 Avis sur les modems pour le Canada ................................................................................ 22 Avis sur les modems pour le Japon ................................................................................... 22 Avis sur les modems pour la Nouvelle-Zlande ................................................................ 22 Assistance vocale ............................................................................................. 23 Avis de compatibilit lectromagntique ............................................................................................ 23 Avis de la FCC ................................................................................................................... 24 Modifications ..................................................................................................... 24 Cbles ............................................................................................................... 24 Dclaration de conformit pour les produits portant le logo FCC (tats-Unis uniquement) ...................................................................................................... 25 Produits quips de priphriques LAN sans fil ............................................... 25 Dclaration sur les tlcommunications pour l'Australie ................................................... 25 Avis pour le Brsil .............................................................................................................. 26 Avis pour le Canada .......................................................................................................... 26 Avis pour l'Union europenne ............................................................................................ 26 Dclaration de conformit ................................................................................. 26 Produits quips de modules sans fil ............................................... 27 Dclaration relative au rseau tlphonique europen (modem/
fax) .................................................................................................... 28 Avis sur l'ergonomie ......................................................................... 28 Avis pour le Japon ............................................................................................................. 28 Marques de certification des priphriques WLAN et Bluetooth ....................... 29 Avis pour la Core du Sud ................................................................................................. 29 Avis pour le Mexique ......................................................................................................... 30 Avis pour Tawan ............................................................................................................... 30 vi 3 Avis de scurit pour les ordinateurs portables ....................................................................................... 31 Notice d'avertissement relative la chaleur ....................................................................................... 31 Avis sur les risques lis la scurit .................................................................................................. 31 Avis sur les batteries remplaables par l'utilisateur ............................................................................ 32 Avis sur le niveau du volume du casque et des couteurs ................................................................ 32 Avis sur les cordons d'alimentation .................................................................................................... 33 Nettoyage du clavier ........................................................................................................................... 33 Avis sur les dplacements .................................................................................................................. 33 Avis de scurit pour la Chine ............................................................................................................ 34 Chine : avis sur l'altitude .................................................................................................... 34 Chine : avis sur une utilisation dans des conditions tropicales .......................................... 34 Norvge et Sude : notice de mise la terre des cbles pour les produits quips d'un tuner TV ... 34 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles ...................................................................................................................................................... 35 Informations importantes relatives la scurit ................................................................................. 35 Conditions d'installation ...................................................................................................................... 36 Avis sur le remplacement de la batterie ............................................................................................. 36 Avis sur le volume des casques et des couteurs ............................................................................. 37 Informations de scurit relatives au laser ......................................................................................... 37 Exigences relatives au bloc d'alimentation et au cordon d'alimentation ............................................. 37 Exigences relatives la mise la terre des alimentations de classe 1 ............................. 37 Danemark .......................................................................................................... 38 Finlande ............................................................................................................ 38 Norvge ............................................................................................................. 38 Sude ................................................................................................................ 38 Exigences relatives l'alimentation ................................................................................... 38 Pour une utilisation en Norvge ........................................................................ 38 Cordons d'alimentation requis ........................................................................................... 39 Spcifications du cordon d'alimentation pour le Japon ...................................................... 39 Risque de pincement .......................................................................................................................... 39 Avis de scurit pour la Chine ............................................................................................................ 40 Chine : avis sur l'altitude .................................................................................................... 40 Chine : avis sur une utilisation dans des conditions tropicales .......................................... 40 Avis d'acoustique pour l'Allemagne .................................................................................................... 41 5 Avis sur les conditions d'utilisation pour les ordinateurs portables ...................................................... 42 Recyclage du matriel lectronique et de la batterie ......................................................................... 42 Mise au rebut des quipements par les utilisateurs ........................................................................... 42 Substances chimiques ....................................................................................................................... 42 Avis sur l'environnement pour la Chine .............................................................................................. 43 vii Avis sur la restriction des substances dangereuses pour la Chine (RoHS) ....................................... 43 Dclaration de contenu de l'quipement pour le Japon ..................................................................... 46 Loi du Mexique sur l'utilisation durable de l'nergie ........................................................................... 46 Rglementation EEE de la Turquie .................................................................................................... 46 Restriction d'utilisation de substances dangereuses pour l'Ukraine ................................................... 46 Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire ................... 46 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles .......................................................................................................................................... 47 Recyclage du matriel lectronique et des batteries .......................................................................... 47 Mise au rebut des quipements par les utilisateurs ........................................................................... 47 Conformit ENERGY STAR (certains modles) .............................................................................. 47 Substances chimiques ....................................................................................................................... 49 Avis sur le mercure ............................................................................................................................. 49 Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire ................... 49 Avis sur la restriction des substances dangereuses pour la Chine (RoHS) ....................................... 49 The Table of Toxic and Hazardous Substances/Elements and their Content ................... 50 Dclarations IT ECO .......................................................................................................................... 51 Avis sur la restriction des substances dangereuses pour le Japon (RoHS) ....................................... 52 Ley para el Aprovechamiento Sustentable de la Energa de Mxico (loi du Mexique sur l'utilisation durable de l'nergie) ......................................................................................................... 52 Rglementation EEE de la Turquie .................................................................................................... 52
(restriction d'utilisation de substances dangereuses pour l'Ukraine) .............................................................................................................. 53 Index ................................................................................................................................................................... 54 viii 1 Avis de rglementation sur les ordinateurs portables Ce chapitre fournit des avis de rglementation spcifiques des pays et des rgions concernant les produits filaires et sans fil, ainsi que des informations de conformit concernant l'ordinateur. Certains de ces avis peuvent ne pas s'appliquer votre produit. Un ou plusieurs priphriques sans fil intgrs peuvent tre installs. Dans certains environnements, l'utilisation d'appareils sans fil peut tre limite. Ces restrictions peuvent s'appliquer dans les avions, dans les hpitaux, proximit d'explosifs, dans des lieux dangereux, etc. Si vous n'tes pas sr des rgles qui s'appliquent ce produit, demandez si vous pouvez l'utiliser avant de le mettre sous tension. Pour identifier un priphrique matriel, tel qu'un priphrique rseau LAN sans fil (WLAN), choisissez la procdure ci-dessous qui correspond au systme d'exploitation excut sur votre ordinateur. Sous Windows Vista, procdez comme suit :
1. Slectionnez Dmarrer > Ordinateur > Proprits systme. 2. Dans le volet gauche, cliquez sur Gestionnaire de priphriques. Sous Windows 7, procdez comme suit :
Slectionnez Dmarrer > Panneau de configuration > Systme et scurit > Gestionnaire de priphriques. Sous Windows 8, procdez comme suit :
1. Dans l'cran d'accueil, tapez c, puis slectionnez Panneau de configuration. 2. Slectionnez Systme et scurit, puis slectionnez Gestionnaire de priphriques dans la zone Systme. La liste de tous les priphriques installs sur votre ordinateur s'affiche. Pour les systmes d'exploitation non Windows, suivez les instructions fournies par votre systme d'exploitation pour identifier un priphrique matriel tel qu'un priphrique rseau LAN sans fil
(WLAN). Des tiquettes de rglementation spcifiques votre pays ou rgion peuvent tre apposes sous le produit : sous la batterie, sous une trappe accessible par l'utilisateur (ou tout autre emplacement accessible par l'utilisateur), sur le module sans fil ou sur le modem. 1 Sous Windows 7, pour consulter le numro d'identification FCC d'un module radio de votre ordinateur portable (par exemple, Bluetooth, WLAN ou WWAN), procdez comme suit :
1. 2. 3. Allumez ou redmarrez l'ordinateur puis appuyez sur echap lorsque le message Press the ESC key for Startup Menu (Pour accder au menu de dmarrage, appuyez sur la touche echap) s'affiche en bas de l'cran. Appuyez sur f10 pour accder au BIOS. Slectionnez le menu System Configuration (Configuration du systme). Sous Windows 8, procdez comme suit :
1. Mettez l'ordinateur sous tension ou redmarrez-le, puis appuyez sur la touche echap lorsque le message Press the ESC key for Startup Menu (Pour accder au menu de dmarrage, appuyez sur la touche echap) apparat en bas de l'cran. 2. Appuyez sur f10 pour accder Computer Setup. Les identifiants FCC sont affichs en bas de l'cran. ATTENTION : Les appareils qui ne sont pas destins la vente ou une utilisation aux tats-Unis ne possdent peut-tre pas d'identifiants FCC. 2 Chapitre 1 Avis de rglementation sur les ordinateurs portables Rglementation FCC Le prsent quipement a t test et dclar conforme aux limites d'un appareil numrique de Classe B, telles que dfinies dans l'article 15 des rglementations FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences prjudiciables dans un environnement rsidentiel. Le prsent quipement gnre, utilise et peut mettre une nergie de radiofrquence et, s'il n'est pas install et utilis conformment aux instructions, peut entraner des interfrences prjudiciables pour les radiocommunications. Cependant, tout risque d'interfrences ne peut tre totalement exclu dans certains environnements spcifiques. Si ce matriel devait provoquer des interfrences avec une radio ou un tlviseur, ce qu'il est facile de dceler en teignant puis en rallumant ce matriel, il est alors vivement conseill l'utilisateur d'essayer de supprimer ces interfrences en prenant une ou plusieurs des mesures suivantes :
Rorienter ou repositionner l'antenne de rception. loigner le matriel informatique du rcepteur. Brancher le matriel informatique sur la prise d'un circuit autre que celui sur lequel est branch le rcepteur. Demander conseil un revendeur ou un technicien de radio ou de tlvision expriment. Modifications La FCC stipule que l'utilisateur doit tre inform que toute modification opre sur l'appareil, n'ayant pas t expressment approuve par HP, peut entraner l'annulation des droits d'exploitation du produit dont bnficie l'utilisateur. Cbles Pour tre conformes la rglementation de la FCC, les connexions d'entre de l'appareil doivent tre tablies avec des cbles blinds munis d'embouts de connecteurs RFI/EMI mtalliques. Rglementation FCC 3 Dclaration de conformit des produits portant le logo FCC (tats-Unis uniquement) Cet appareil est conforme l'article 15 des rglementations FCC. Son utilisation est soumise aux deux conditions suivantes :
1. Cet appareil ne doit pas provoquer d'interfrences nuisibles. 2. Cet appareil doit accepter toutes interfrences reues, notamment des interfrences pouvant provoquer un fonctionnement non voulu. Si vous souhaitez poser des questions sur le produit qui ne sont pas en rapport avec cette dclaration, crivez l'adresse suivante :
Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000, tats-Unis Pour toute question concernant cette dclaration FCC, crivez-nous l'adresse suivante :
Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000, tats-Unis ou appelez HP au (281) 514-3333. Pour identifier le produit, reportez-vous au numro de rfrence, de srie ou de modle inscrit sur le produit. Produits avec appareils sans fil LAN ou modules HP Mobile Broadband Cet appareil ne doit pas tre situ proximit d'une autre antenne ou d'un metteur, ni fonctionner en mme temps. AVERTISSEMENT ! Exposition aux rayonnements de frquence radio La puissance de sortie mise par cet appareil est nettement infrieure aux limites d'exposition aux frquences radio dictes par le FCC. Toutefois, l'appareil doit tre utilis de sorte que les possibilits de contact humain soient rduites au maximum pendant le fonctionnement normal des tablettes et des ordinateurs portables. Pendant le fonctionnement normal de tablettes et d'ordinateurs portables dont les crans sont infrieurs ou gaux 30,5 cm (12 pouces) : pour viter de dpasser les limites d'expositions aux frquences radio dictes dans la rglementation FCC, il est prfrable de ne pas s'approcher plus de 2,5 cm (1 pouce) de l'antenne. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. Pendant le fonctionnement normal d'ordinateurs portables dont les crans sont suprieurs 30,5 cm
(12 pouces) : Pour viter tout risque de dpassement des limites d'exposition aux frquences radio dictes par la FCC, les antennes ne doivent pas se trouver moins de 20 cm (8 pouces) de l'utilisateur, y compris lorsque l'cran de l'ordinateur est ferm. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. 4 Chapitre 1 Avis de rglementation sur les ordinateurs portables ATTENTION : Lorsque vous utilisez un rseau local sans fil IEEE 802.11a, abstenez-vous d'utiliser ce matriel l'extrieur. En effet, il fonctionne dans la plage de frquences allant de 5,15 5,25 GHz. La FCC exige que ce matriel soit utilis l'intrieur pour la plage de frquences comprise entre 5,15 et 5,25 GHz, afin de rduire les risques d'interfrence avec les systmes de satellites du service mobile du canal commun. Un radar puissance leve est allou comme premier utilisateur des bandes de frquence allant de 5,25 5,35 GHz et de 5,65 5,85 GHz. Ces stations radar peuvent entraner des interfrences avec cet appareil et/ou l'endommager. Avis pour le Brsil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Avis pour le Canada Cet appareil numrique de Classe B respecte toutes les exigences des rglementations canadiennes sur les quipements pouvant causer des interfrences. Si ce priphrique est quip de fonctions WLAN ou Bluetooth, il est conforme aux normes RSS exemptes de licence dictes par Industry Canada. Son fonctionnement est soumis deux conditions : (1) ce priphrique ne doit pas gnrer d'interfrence et (2) ce priphrique doit supporter toutes les interfrences reues, y compris les interfrences qui pourraient entraner un mauvais fonctionnement. AVERTISSEMENT ! Exposition aux radiations de frquence radio : la puissance de rayonnement de cet appareil est infrieure aux limites d'exposition aux radiations mises par les frquences radio dictes par Industrie Canada. Toutefois, l'appareil doit tre utilis de sorte que les possibilits de contact humain soient rduites au maximum pendant son fonctionnement normal. Pendant le fonctionnement normal de tablettes et d'ordinateurs portables dont les crans sont infrieurs ou gaux 30,5 cm (12 pouces) : pour viter de dpasser les limites d'exposition aux frquences radio dictes par Industrie Canada, il est prfrable de ne pas s'approcher plus de 2,5 cm (1 pouce) de l'antenne. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. Pendant le fonctionnement normal d'ordinateurs portables dont les crans sont suprieurs 30,5 cm
(12 pouces) : pour viter tout risque de dpassement des limites d'exposition aux frquences radio dictes par Industrie Canada, les antennes ne doivent pas se trouver moins de 20 cm (8 pouces) de l'utilisateur, y compris lorsque l'cran de l'ordinateur est ferm. Pour identifier l'emplacement des antennes sans fil, reportez-vous aux manuels de l'utilisateur qui accompagnent votre ordinateur. ATTENTION : Lorsque vous utilisez un rseau local sans fil IEEE 802.11a, abstenez-vous d'utiliser ce matriel l'extrieur. En effet, il fonctionne dans la plage de frquences allant de 5,15 5,25 GHz. Industrie Canada exige que ce matriel soit utilis l'intrieur pour la plage de frquences comprise entre 5,15 et 5,25 GHz, afin de rduire les risques d'interfrence avec les systmes de satellites du service mobile du canal commun. Un radar puissance leve est allou comme premier utilisateur des bandes de frquence allant de 5,25 5,35 GHz et de 5,65 5,85 GHz. Ces stations radar peuvent entraner des interfrences avec cet appareil et/ou l'endommager. Les antennes de ce priphrique ne sont pas remplaables. Toute tentative d'accs par l'utilisateur endommagera l'ordinateur. Avis pour le Brsil 5 Avis pour l'Union europenne Dclaration de conformit Les produits portant la marque CE sont conformes une ou plusieurs directives de l'UE suivantes, le cas chant :
Directive relative la basse tension 2006/95/CE Directive EMC 2004/108/CE Directive Ecodesign 2009/125/CE Directive R&TTE 1999/5/CE Directive RoHS 2011/65/CE La conformit CE de ce produit est uniquement valable si ce dernier est aliment par un adaptateur secteur estampill CE (le cas chant) et un cordon d'alimentation fournis par HP. Reportez-vous la section Cordons d'alimentation requis la page 39. La conformit ces directives implique la conformit aux normes europennes harmonises applicables (normes europennes) qui sont prsentes dans la dclaration de conformit de l'UE dicte par HP pour ce produit ou cette gamme de produits et disponibles soit dans la documentation du produit soit sur le site Web suivant : www.hp.eu/certificates (effectuez une recherche partir du nom de modle du produit ou de son numro de produit, accessible sur l'tiquette de conformit). La conformit est reprsente par la marque de conformit CE ci-aprs. Pour certains produits de tlcommunications, le numro 4 chiffres d'un organisme de certification peut tre ajout en suffixe. Reportez-vous l'tiquette de conformit appose sur le produit. La fonctionnalit de tlcommunications de ce produit peut tre utilise dans les pays de l'Union europenne et de l'AELE suivants : Allemagne, Autriche, Belgique, Bulgarie, Chypre, Danemark, Espagne, Estonie, Finlande, France, Grce, Hongrie, Irlande, Islande, Lettonie, Liechtenstein, Lituanie, Luxembourg, Malte, Norvge, Pays-Bas, Pologne, Portugal, Rpublique tchque, Roumanie, Royaume-Uni, Slovaquie, Slovnie, Sude et Suisse. Pour toute question portant sur les rglementations, contactez Hewlett-Packard GmbH, Dept./MS cette adresse : HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, ALLEMAGNE. 6 Chapitre 1 Avis de rglementation sur les ordinateurs portables Produits quips de modules sans fil (EMF) CET APPAREIL EST CONFORME AUX NORMES INTERNATIONALES EN MATIRE D'EXPOSITION AUX RAYONNEMENTS DE FRQUENCE RADIO. Le module sans fil intgr votre ordinateur portable est un metteur et rcepteur radio. Cet appareil est conu pour ne pas dpasser les limites d'exposition aux frquences radio dfinies par des directives internationales (ICNIRP). Ces limites sont dfinies dans le cadre de directives qui tablissent les niveaux autoriss de rayonnements de frquence radio pour l'ensemble de la population. Ces directives, dictes par des organismes scientifiques indpendants, s'appuient sur une valuation rgulire et minutieuse de diffrentes tudes scientifiques. Cet appareil est galement conforme aux directives R&TTE europennes relatives la protection de la sant et de la scurit des personnes. La norme d'exposition dfinie pour les appareils mobiles utilise une unit de mesure appele SAR
(Specific Absorption Rate, taux d'absorption spcifique).* Ce taux a t obtenu via des tests au cours desquels les appareils ont effectu des transmissions au niveau de puissance certifi le plus lev, dans toutes les bandes de frquence. Le taux SAR rel de l'appareil en cours de fonctionnement peut tre bien infrieur la valeur maximale dfinie, dans la mesure o il fonctionne diffrents niveaux de puissance et utilise uniquement la puissance requise pour atteindre le rseau. Install dans l'ordinateur portable, cet appareil est conforme aux directives en matire d'exposition aux frquences radio lorsque les antennes se trouvent une distance minimale du corps. Pour transmettre des donnes ou des messages, l'appareil doit disposer d'une connexion de qualit au rseau. Dans certains cas, les transmissions de donnes ou de messages peuvent tre retardes jusqu' ce qu'une connexion soit disponible. Veillez respecter la distance conseille jusqu' la fin de la transmission.
*Les directives internationales autres que celles de la FCC indiquent que la limite SAR pour les appareils mobiles utiliss par le grand public est de 2 watts/kilogramme (W/kg), calcul sur une moyenne de 10 grammes de masse tissulaire. Ces directives incluent une marge de scurit importante pour une protection accrue du grand public et pour tenir compte des variations dans les mesures. Les valeurs SAR peuvent varier selon les exigences locales en matire de reporting et selon la bande du rseau. Cet quipement intgre un appareil de transmission et rception radiolectrique. Lors d'une utilisation standard, l'observation d'une distance de sparation de 20 cm permet aux niveaux d'exposition des frquences radio de respecter la conformit des normes australiennes et no-zlandaises. Dclaration relative au rseau tlphonique europen (modem/fax) Le produit ci-joint est conforme aux spcifications de la directive 1999/5/CE (annexe II) sur les quipements hertziens et quipements terminaux de tlcommunications et porte en consquence la marque CE. Cependant, des diffrences existant entre les rseaux tlphoniques publics commuts
(RTPC) nationaux prsents dans les diffrents pays/rgions, cette homologation en elle-mme ne garantit pas la russite de toutes les oprations sur tous les points de terminaison du RTPC. En cas de problme, prenez contact avec le fournisseur auprs duquel vous vous tes procur votre quipement. L'quipement a t conu pour fonctionner avec les rseaux DTMF analogiques. Cet quipement peut connatre des difficults d'interconnexion sur les rseaux RTPC prenant uniquement en charge la composition impulsions. Contactez votre oprateur rseau pour bnficier d'une aide supplmentaire. Avis pour l'Union europenne 7 Avis sur l'ergonomie Allemagne (texte en franais) Lorsqu'un ordinateur portable est utilis sur une station de travail professionnelle dans le cadre d'un travail sur cran de visualisation o la directive 90/270/CEE relative aux crans de visualisation est applicable, un clavier externe adapt est recommand. Selon l'application et le travail ralis, un moniteur externe adapt peut galement tre ncessaire pour obtenir des conditions de travail comparables celles d'une station de travail. Rf : EK1-ITB 2000 (certification GS volontaire) Les ordinateurs portables portant la marque d'homologation GS sont conformes aux exigences en matire d'ergonomie. Sans clavier externe, ils sont uniquement adapts aux tches ponctuelles sur cran de visualisation. Une utilisation mobile dans de mauvaises conditions de luminosit (par exemple, lumire directe du soleil) peut occasionner des reflets et donc rduire la lisibilit. Allemagne (texte en allemand) Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG
(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Rf : EK1-ITB 2000 (freiwillige GS Zertifizierung) Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. 8 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis pour le Japon Avis pour le Japon 9 Priphriques LAN, priphriques WAN et marques de certification pour les priphriques Bluetooth This product contains certified radio equipment. Avis pour la Core du Sud Avis pour le Mexique Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Si su producto se brinda con accesorios inalmbricos como un teclado o un mouse y necesita identificar el modelo del accesorio, consulte la etiqueta incluida en ese accesorio. 10 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis sur les appareils sans fil pour Singapour Mettez hors tension les priphriques WWAN lorsque vous tes bord d'avions. L'utilisation de ces appareils bord d'avions est illgale, peut tre dangereuse pour le fonctionnement de l'avion et risque de perturber le rseau de tlphonie mobile. Le non-respect de cette instruction peut entraner la suspension ou le refus de services cellulaires au contrevenant, ou des actions juridiques, ou les deux. Les utilisateurs doivent limiter l'emploi d'quipement radio dans des dpts de carburant, usines chimiques et l o des explosions sont en cours. Comme pour les autres quipements mobiles de transmission par frquences radiolectriques, il est recommand aux utilisateurs, pour le bon fonctionnement de leur quipement et pour la scurit du personnel, de ne pas trop approcher les antennes du corps humain au cours du fonctionnement de l'quipement. Ce priphrique a t conu pour tre conforme aux exigences applicables pour l'exposition aux ondes radio, en fonction de normes scientifiques qui comprennent des plages destines assurer la scurit de tout le monde, quel que soit l'ge et l'tat de sant. Ces rgles d'exposition aux ondes radio utilisent une unit de mesure appele taux d'absorption spcifique (SAR - Specific Absorption Rate). Les tests relatifs aux taux d'absorption sont mens l'aide de mthodes standardises, le tlphone transmettant son niveau de certifi le plus lev dans toutes les bandes de frquences utilises. Les informations de donnes SAR se basent sur les normes EN50360 et EN50361 de CENELEC, qui utilisent la limite de 2 watts par kilogramme, sur une moyenne de 10 grammes de tissu. Avis sur les appareils sans fil WWAN pour la Thalande Cet quipement de tlcommunications est conforme aux rglementations de la NTC. Avis pour Tawan Priphriques WLAN 802.11a Avis sur les appareils sans fil pour Singapour 11 Priphriques WLAN 802.11b Avis sur les utilisations en vol L'utilisation d'quipement lectronique bord d'un avion commercial est laisse la discrtion de la compagnie arienne. Avis sur les batteries remplaables par l'utilisateur Lorsqu'une batterie atteint la fin de sa vie utile, ne la jetez pas avec les dchets mnagers ordinaires. Appliquez les lois et rglementations locales en matire de mise au rebut des batteries d'ordinateur. HP encourage ses clients recycler les quipements lectroniques usags, les cartouches d'impression HP d'origine et les batteries rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site Web HP l'adresse http://www.hp.com/recycle. Pour des informations sur le retrait d'une batterie remplaable par l'utilisateur, reportez-vous au manuel de l'utilisateur livr avec le produit. Conformit ENERGY STAR En tant que partenaire ENERGY STAR, HP a suivi le processus avanc de qualification et de certification des produits de l'EPA pour s'assurer que les produits portant le logo ENERGY STAR respectaient les rglementations ENERGY STAR en matire de rendement lectrique. Le logo suivant apparat sur tous les ordinateurs respectant les spcifications ENERGY STAR :
Le programme ENERGY STAR pour les ordinateurs a t cr par l'EPA pour encourager l'efficacit nergtique et rduire la pollution atmosphrique grce l'utilisation d'quipements meilleur 12 Chapitre 1 Avis de rglementation sur les ordinateurs portables rendement lectrique chez soi, au bureau et dans les usines. Une manire d'atteindre cet objectif consiste utiliser la fonction de gestion de l'alimentation de Microsoft Windows pour rduire la consommation d'nergie lorsque le produit n'est pas utilis. Cette fonction permet la mise en mode veille de l'ordinateur aprs une priode d'inactivit de l'utilisateur. Lorsque vous utilisez cette fonction avec un moniteur conforme au programme ENERGY STAR, les fonctions de gestion de l'alimentation du moniteur sont galement prises en charge. Pour profiter de ces conomies d'nergie potentielles, la fonction de gestion de l'alimentation est prconfigure comme suit lorsque le systme fonctionne sur secteur :
Dsactivation de l'cran aprs 10 minutes Mise en veille aprs 20 minutes Le mode veille est dsactiv par une simple pression sur le bouton d'alimentation/de veille. Lorsque la fonction Wake On LAN d'veil par appel rseau est active, le mode veille peut galement tre dsactiv en rponse un signal du rseau. Vous trouverez des informations complmentaires sur les conomies nergtiques et financires ralisables avec la fonction de gestion de l'alimentation sur le site Web du programme ENERGY STAR de l'U.S. Environmental Protection Agency (EPA), cette adresse http://www.energystar.gov/
powermanagement. Vous trouverez galement des informations sur le programme ENERGY STAR et ses avantages pour l'environnement sur le site Web ENERGY STAR de l'U.S. Environmental Protection Agency (EPA), cette adresse http://www.energystar.gov. Conformit du laser AVERTISSEMENT ! L'utilisation de mthodes de contrle ou de rglage ou de procdures, autres que celles indiques dans ce document ou dans le manuel d'installation d'appareils rayon laser, peut exposer l'utilisateur des radiations dangereuses. Pour rduire le risque d'exposition un rayonnement dangereux :
N'essayez pas d'ouvrir le botier du module. Il ne contient pas de pice rparable par l'utilisateur. N'utilisez pas de commandes, n'excutez aucun rglage ni aucune procdure au priphrique laser autre que ceux qui figurent dans le manuel d'installation du produit laser. Seul un mainteneur agr est autoris rparer l'unit. Ce produit peut tre fourni avec un priphrique de stockage optique (par exemple, un lecteur de CD ou DVD) et/ou un metteur-rcepteur fibre optique. Chacun de ces appareils qui contient un laser est class comme produit laser de classe 1 conformment la norme CEI/EN 60825-1 et rpond aux critres de scurit de cette norme. Chaque produit laser est conforme aux paragraphes 21 CFR 1040.10 et 1040.11 des rglementations FDA des tats-Unis ou est conforme ces rglementations l'exception des dviations relatives l'avis sur le laser No. 50, en date du 24 juin 2007. Conformit du laser 13 Avis sur les modems AVERTISSEMENT ! Pour rduire le risque d'incendie, d'lectrocution et de blessures pendant l'utilisation de cet appareil, suivez systmatiquement les rgles de scurit de base suivantes :
N'utilisez pas l'appareil proximit d'eau, par exemple prs d'une baignoire, d'un lavabo, d'un vier ou d'une piscine, ou encore dans une cave humide. vitez d'utiliser l'appareil pendant un orage. Il existe en effet un risque d'lectrocution d la foudre. N'utilisez jamais cet appareil pour signaler une fuite de gaz, si vous vous trouvez proximit de la fuite. Dbranchez systmatiquement le cble du modem avant d'ouvrir l'enceinte de l'appareil ou de toucher un cble modem non isol, une prise jack ou un composant interne. Si cet appareil n'a pas t fourni avec un cordon tlphonique, n'utilisez qu'un cordon tlphonique No. 26 AWG ou suprieur. Ne branchez pas un cble de modem ou de tlphone dans la prise rseau (RJ-45). GARDEZ CES INSTRUCTIONS Homologations des priphriques de tlcommunication Le priphrique de tlcommunication de votre ordinateur est homologu pour une connexion au rseau tlphonique des pays et rgions dont le certificat d'homologation apparat sur l'tiquette du produit appose sur la base de l'ordinateur ou sur le modem. Pour vrifier que ce matriel est configur pour le pays ou la rgion o il se trouve, reportez-vous au manuel d'utilisation qui l'accompagne. Si vous slectionnez un pays ou une rgion autre que celui ou celle dans lequel se trouve le modem, il risque de violer les lois de tlcommunication du pays ou de la rgion. De plus, votre modem risque de ne pas fonctionner correctement si vous ne slectionnez pas le bon pays ou la bonne rgion. Si, lorsque vous slectionnez un pays ou une rgion, un message indique que ce pays ou cette rgion n'est pas compatible, c'est que le modem n'a pas t agr dans ce pays ou cette rgion et ne doit donc pas tre utilis. Avis sur les modems pour les tats-Unis Cet quipement est conforme l'article 68 des rglementations FCC et aux conditions adoptes par l'ACTA. Une tiquette appose sur la face infrieure de l'ordinateur ou sur le modem comporte, entre autres informations, un identificateur de produit au format amricain : AAAEQ##TXXXX. Fournissez ces informations la compagnie tlphonique si elle vous le demande. Homologation applicable prise USOC = RJ11C. Les prises utilises pour connecter cet quipement aux cbles lectriques des lieux et au rseau tlphonique doivent tre conformes l'article 68 des rglementations FCC et aux conditions approuves par l'ACTA. Un cordon tlphonique et une prise modulaire conformes FCC sont livrs avec cet quipement. Il est conu pour tre branch sur une prise modulable galement conforme. Pour des dtails, reportez-vous aux instructions d'installation. Le REN permet de dterminer le nombre de priphriques pouvant tre raccords sur une ligne tlphonique. Si un nombre excessif d'appareils est prsent sur la ligne tlphonique, ceux-ci risquent de ne pas rpondre un appel entrant. Dans la plupart des cas (mais pas toujours), la somme des REN des priphriques raccords sur une ligne ne doit pas dpasser cinq (5). Pour tre sr du nombre d'appareils pouvant tre connects une mme ligne (dtermin par le numro REN), contactez la compagnie de tlphone locale. Pour les produits agrs aprs le 23 juillet 2001, le REN 14 Chapitre 1 Avis de rglementation sur les ordinateurs portables fait partie de l'identificateur du produit qui est au format amricain : AAAEQ##TXXXX. Les chiffres reprsents par le signe ## constituent le REN sans virgule (par exemple, 03 reprsente un REN de 0,3). Pour les produits antrieurs cette date, le REN est affich sparment sur l'tiquette. Si cet quipement HP dtriore le rseau tlphonique, la compagnie de tlphone vous avisera par avance qu'une interruption de service peut tre requise. Si la compagnie de tlphone ne peut pas vous aviser par avance, vous serez inform ds que possible. Vous serez galement inform de vos droits de rclamation auprs de la FCC si vous le jugez ncessaire. La compagnie de tlphone peut apporter des modifications ses quipements, oprations ou procdures pouvant affecter le bon fonctionnement de votre matriel. Si cela se produit, la compagnie de tlphone vous informera par avance pour vous permettre d'apporter les modifications requises afin d'assurer un service tlphonique sans interruption. Si vous rencontrez des problmes avec cet quipement, contactez le support technique. S'il dtriore le rseau tlphonique, la compagnie tlphonique peut vous demander de le dconnecter jusqu'
ce que le problme soit rsolu. Les seules rparations que vous pouvez effectuer sont celles qui sont prsentes dans la section Rsolution des problmes du manuel de l'utilisateur, si ce dernier est fourni. Le raccord des lignes partages est soumis aux tarifs en vigueur dans votre pays. Pour plus d'informations, contactez les commissions d'utilit publique, la commission de service public ou les commissions d'entreprise. Si votre domicile est quip d'un dispositif d'alarme spcial connect la ligne tlphonique, vrifiez que l'installation de cet quipement HP ne dsactive pas ce dispositif. Si vous avez des questions sur ce qui peut dsactiver le dispositif d'alarme, consultez votre compagnie de tlphone ou un installateur qualifi. La loi de 1991 sur la protection des usagers du tlphone interdit l'utilisation d'un ordinateur ou de tout autre dispositif lectronique, y compris les tlcopieurs, pour l'envoi d'un message, moins que ne soit inscrit clairement sur ce message (dans la marge, le haut ou le bas de chaque page ou sur la premire page) la date et l'heure de l'envoi ainsi que l'identit de la socit expditrice, de l'entit ou du particulier, ainsi que le numro de tlphone de la machine expditrice, de l'entit ou du particulier. Le numro de tlphone ne doit pas tre un numro commenant par 900 ni un numro dont le cot dpasse celui d'un appel local ou longue distance. Pour programmer ces informations dans votre tlcopieur, reportez-vous aux instructions relatives au logiciel d'envoi de tlcopies. Avis sur les modems 15 Dclarations sur les modems pour les tats-Unis Reportez-vous aux dclarations du fabricant du modem ci-aprs pour le modem install dans votre ordinateur :
16 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis sur les modems pour le Canada Cet quipement est conforme aux spcifications techniques d'Industrie Canada applicables. Le REN indique le nombre maximal d'appareils pouvant tre connects une interface tlphonique. La terminaison d'une interface peut consister en une combinaison d'appareils quelconque condition que la somme des REN de ces dispositifs ne dpasse pas 5. Le REN de ce terminal de communication est 1. Avis sur les modems pour le Japon Si la marque de certification japonaise ne figure pas sur la base de l'ordinateur, reportez-vous la certification ci-dessous. La marque de certification japonaise pour le modem fax/donnes V.92 56K figure ci-dessous :
Avis sur les modems pour la Nouvelle-Zlande L'octroi d'un Telepermit pour n'importe quel terminal de tlcommunication indique uniquement que Telecom certifie que l'quipement est bien conforme aux exigences minimales de connexion son rseau. Il ne constitue aucunement une prise de responsabilit quant au produit par Telecom, et n'apporte aucune sorte de garantie. Plus particulirement, il n'apporte aucune garantie que l'quipement fonctionnera correctement et en tous points avec un autre quipement Telepermit d'une marque ou d'un modle diffrent, et n'implique pas qu'un produit est compatible avec l'ensemble des services du rseau Telecom. Quelles que soient les conditions d'utilisation, ce matriel ne peut fonctionner correctement aux vitesses suprieures celles pour lesquelles il a t conu. Telecom dcline toute responsabilit si des difficults devaient apparatre dans de telles circonstances. Si cet quipement est dot de la composition impulsions, Telecom ne garantit pas la prise en charge par la ligne de la composition impulsions. L'utilisation de la numrotation par impulsions, sur une ligne partage par plusieurs dispositifs, peut provoquer un dclenchement de la sonnerie ou des parasites et galement une rponse errone. *Si ce type de problme se produit, l'utilisateur ne doit pas contacter les services techniques de Telecom Nouvelle-Zlande. Certains paramtres ncessaires pour une conformit avec les exigences Telepermit de Telecom dpendent du matriel (PC) associ cet appareil. Le matriel associ doit tre configur de manire fonctionner dans les limites prescrites pour tre conforme aux spcifications Telecom :
a. Seules 10 tentatives d'appel maximum peuvent tre effectues au mme numro dans un intervalle de 30 minutes, pour n'importe quelle initialisation manuelle d'appel. b. Un intervalle minimum de 30 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. Avis sur les modems 17 c. d. Lorsque des appels automatiques sont effectus divers numros, un intervalle minimum de 5 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. Le matriel doit tre configur de telle manire que les appels soient traits dans un dlai de 3 30 secondes partir de la rception de la sonnerie (il doit donc tre configur entre 2 et 10 secondes). Support vocal Toutes les personnes qui utilisent cet appareil pour enregistrer des conversations tlphoniques doivent se soumettre la lgislation de la Nouvelle-Zlande. Celle-ci exige qu'au moins une des deux parties participant la conversation doit tre au courant de l'enregistrement. En outre, les principes relatifs la nature des informations personnelles recueillies, aux objectifs de leur collecte, leur utilisation et la divulgation de ces informations des tiers, principes rpertoris dans la loi sur la protection de la vie prive de 1993, doivent tre respects. Ce matriel ne doit pas tre configur de manire passer des appels automatiques au numro d'urgence (111) mis en place par Telecom. Avis sur les cordons d'alimentation Si votre ordinateur ne vous a pas t livr avec un cordon d'alimentation ou un accessoire d'alimentation secteur compatible avec votre ordinateur, vous devrez acheter un cordon d'alimentation homologu pour votre pays ou votre rgion. Le cordon d'alimentation doit tre test et garanti pour le produit, pour la tension et le type de courant inscrits sur l'tiquette des valeurs nominales lectriques du produit. Les valeurs nominales de tension et d'intensit du cordon doivent tre suprieures celles indiques sur l'ordinateur. En outre, le diamtre du cordon doit tre au minimum de 0,75 mm/18 AWG et sa longueur doit tre comprise entre 1,5 m (5 pieds) et 2 m (6.5 pieds). Si vous avez des questions sur le type de cordon d'alimentation utiliser, contactez votre fournisseur de service agr. Branchez le cordon d'alimentation de sorte qu'il ne puisse pas tre pitin ou coinc par des objets. Accordez une attention particulire la fiche, la prise secteur et l'endroit o le cordon sort du botier du portable. Avis sur les cordons d'alimentation pour le Japon Prise CC de la source d'alimentation externe HP 18 Chapitre 1 Avis de rglementation sur les ordinateurs portables Avis de Macrovision Corporation Ce produit intgre une technologie de protection des droits d'auteur qui est protge par des revendications de procd de certains brevets amricains et d'autres droits sur la proprit intellectuelle de Macrovision Corporation et d'autres bnficiaires de droits. L'utilisation de cette technologie de protection des droits d'auteur doit tre autorise par Macrovision Corporation et a pour but de permettre un visionnage domestique et d'autres utilisations limites uniquement, sauf autorisation de Macrovision Corporation. L'ingnierie inverse et le dsassemblage sont interdits. Avis de Macrovision Corporation 19 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis sur les modems AVERTISSEMENT ! Pour rduire le risque d'incendie, d'lectrocution et de blessures pendant l'utilisation de cet appareil, suivez systmatiquement les rgles de scurit de base suivantes :
N'utilisez pas l'appareil proximit d'eau, par exemple prs d'une baignoire, d'un lavabo, d'un vier ou d'une piscine, ou encore dans une cave humide. vitez d'utiliser l'appareil pendant un orage. Il existe en effet un risque d'lectrocution d la foudre. N'utilisez jamais cet appareil, pour signaler une fuite de gaz, si vous vous trouvez proximit de la fuite. Dbranchez systmatiquement le cble du modem avant d'ouvrir l'enceinte de l'appareil ou de toucher un cble modem non isol, une prise jack ou un composant interne. Si cet appareil n'a pas t fourni avec un cordon tlphonique, n'utilisez qu'un cordon tlphonique No. 26 AWG ou suprieur. Ne branchez jamais un cordon de modem ou de tlphone dans la prise RJ-45 (rseau Ethernet). GARDEZ CES INSTRUCTIONS Homologations des priphriques de tlcommunication Le priphrique de tlcommunication de votre ordinateur est homologu pour une connexion au rseau tlphonique des pays et rgions dont le certificat d'homologation apparat sur l'tiquette du produit appose sur la base de l'ordinateur ou sur le modem. Pour vrifier que ce matriel est configur pour le pays ou la rgion o il se trouve, reportez-vous au manuel d'utilisation qui l'accompagne. Si vous slectionnez un pays ou une rgion autre que celui ou celle dans lequel se trouve le modem, il risque de violer les lois de tlcommunication du pays ou de la rgion. De plus, votre modem risque de ne pas fonctionner correctement si vous ne slectionnez pas le bon pays ou la bonne rgion. Si, lorsque vous slectionnez un pays ou une rgion, un message indique que ce pays ou cette rgion n'est pas support, c'est que le modem n'a pas t agr dans ce pays ou cette rgion et ne doit donc pas tre utilis. 20 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis sur les modems pour les tats-Unis Cet quipement est conforme l'article 68 des rglementations FCC et aux conditions adoptes par l'ACTA. Une tiquette appose sur la face infrieure de l'ordinateur ou sur le modem comporte, entre autres informations, un identificateur de produit au format US: AAAEQ##TXXXX. Fournissez ces informations la compagnie tlphonique si elle vous le demande. Homologation applicable prise USOC = RJ11C. Les prises utilises pour connecter cet quipement aux cbles lectriques des lieux et au rseau tlphonique doivent tre conformes l'article 68 des rglementations FCC et aux conditions approuves par l'ACTA. Un cordon tlphonique et une prise modulaire conformes FCC sont livrs avec cet quipement. Il est conu pour tre branch sur une prise modulable galement conforme. Pour des dtails, reportez-vous aux instructions d'installation. Le REN permet de dterminer le nombre de priphriques pouvant tre raccords sur une ligne tlphonique. Si un nombre excessif d'appareils est prsent sur la ligne tlphonique, ceux-ci risquent de ne pas rpondre un appel entrant. Dans la plupart des cas (mais pas toujours), la somme des REN des priphriques raccords sur une ligne ne doit pas dpasser cinq (5). Pour tre sr du nombre d'appareils pouvant tre connects une mme ligne (dtermin par le numro REN), contactez la compagnie de tlphone locale. Pour les produits agrs aprs le 23 juillet 2001, le REN fait partie de l'identificateur du produit qui est au format amricain : AAAEQ##TXXXX. Les chiffres reprsents par le signe ## constituent le REN sans virgule (par exemple, 03 reprsente un REN de 0,3). Pour les produits antrieurs cette date, le REN est affich sparment sur l'tiquette. Si cet quipement HP dtriore le rseau tlphonique, la compagnie de tlphone vous avisera par avance qu'une interruption de service peut tre requise. Si la compagnie de tlphone ne peut pas vous aviser par avance, vous serez inform ds que possible. Vous serez galement inform de vos droits de rclamation auprs de la FCC si vous le jugez ncessaire. La compagnie de tlphone peut apporter des modifications ses quipements, oprations ou procdures pouvant affecter le bon fonctionnement de votre matriel. Si cela se produit, la compagnie de tlphone vous informera par avance pour vous permettre d'apporter les modifications requises afin d'assurer un service tlphonique sans interruption. Si vous rencontrez des problmes avec cet quipement, contactez le support technique. S'il dtriore le rseau tlphonique, la compagnie tlphonique peut vous demander de le dconnecter jusqu'
ce que le problme soit rsolu. Les seules rparations que vous pouvez effectuer sont celles qui sont prsentes dans la section Rsolution des problmes du manuel de l'utilisateur, si ce dernier est fourni. Le raccord des lignes partages est soumis aux tarifs en vigueur dans votre pays. Pour plus d'informations, contactez les commissions d'utilit publique, la commission de service public ou les commissions d'entreprise. Si votre domicile est quip d'un dispositif d'alarme spcial connect la ligne tlphonique, vrifiez que l'installation de cet quipement HP ne dsactive pas ce dispositif. Si vous avez des questions sur ce qui peut dsactiver le dispositif d'alarme, consultez votre compagnie de tlphone ou un installateur qualifi. La loi de 1991 sur la protection des usagers du tlphone interdit l'utilisation d'un ordinateur ou de tout autre dispositif lectronique, y compris les tlcopieurs, pour l'envoi d'un message, moins que ne soit inscrit clairement sur ce message (dans la marge, le haut ou le bas de chaque page ou sur la premire page) la date et l'heure de l'envoi ainsi que l'identit de la socit expditrice, de l'entit ou du particulier, ainsi que le numro de tlphone de la machine expditrice, de l'entit ou du particulier. Le numro de tlphone ne doit pas tre un numro commenant par 900 ni un numro dont le cot dpasse celui d'un appel local ou longue distance. Avis sur les modems 21 Pour programmer ces informations dans votre tlcopieur, reportez-vous aux instructions relatives au logiciel d'envoi de tlcopies. Avis sur les modems pour le Canada Cet quipement est conforme aux normes techniques Industrie Canada applicables. Le REN donne une indication sur le nombre maximum de priphriques qu'il est possible de relier une interface tlphonique. La terminaison d'une interface peut consister en une combinaison de priphriques quelconque condition que la somme des REN de ces dispositifs ne dpasse pas 5. Le REN de ce terminal de communication est 1. Avis sur les modems pour le Japon Si la marque de certification japonaise ne figure pas sur la base de l'ordinateur, reportez-vous la certification ci-dessous. Au Japon, la marque de certification pour le modem LSI Corporation PCI-SV92EX Soft est la suivante :
Avis sur les modems pour la Nouvelle-Zlande L'octroi d'un Telepermit pour n'importe quel terminal de tlcommunication indique uniquement que Telecom certifie que l'quipement est bien conforme aux exigences minimales de connexion son rseau. Il ne constitue aucunement une prise de responsabilit quant au produit par Telecom, et n'apporte aucune sorte de garantie. Plus particulirement, il n'apporte aucune garantie que l'quipement fonctionnera correctement et en tous points avec un autre quipement Telepermit d'une marque ou d'un modle diffrent, et n'implique pas qu'un produit est compatible avec l'ensemble des services du rseau Telecom. Quelles que soient les conditions d'utilisation, ce matriel ne peut fonctionner correctement aux vitesses suprieures celles pour lesquelles il a t conu. Telecom dcline toute responsabilit si des difficults devaient apparatre dans de telles circonstances. Si cet quipement est dot de la composition impulsions, Telecom ne garantit pas la prise en charge par la ligne de la composition impulsions. L'utilisation de la numrotation par impulsions, sur une ligne partage par plusieurs dispositifs, peut provoquer un dclenchement de la sonnerie ou des parasites et galement une rponse errone. Si ce type de problme se produit, l'utilisateur ne doit pas contacter les services techniques de Telecom Nouvelle-Zlande. 22 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Certains paramtres ncessaires pour une conformit avec les exigences Telepermit de Telecom dpendent du matriel (PC) associ cet appareil. Le matriel associ doit tre configur de manire fonctionner dans les limites prescrites pour tre conforme aux spcifications Telecom :
a. Seules 10 tentatives d'appel maximum peuvent tre effectues au mme numro dans un intervalle de 30 minutes, pour n'importe quelle initialisation manuelle d'appel. b. Un intervalle minimum de 30 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. c. d. Lorsque des appels automatiques sont effectus divers numros, un intervalle minimum de 5 secondes doit s'couler entre la fin d'une tentative d'appel et le dbut de la suivante. Le matriel doit tre configur de telle manire que les appels soient traits dans un dlai de 3 30 secondes partir de la rception de la sonnerie (il doit donc tre configur entre 2 et 10 secondes). Assistance vocale Toutes les personnes qui utilisent cet appareil pour enregistrer des conversations tlphoniques doivent se soumettre la lgislation de la Nouvelle-Zlande. Celle-ci exige qu'au moins une des deux parties participant la conversation doit tre au courant de l'enregistrement. En outre, les principes relatifs la nature des informations personnelles recueillies, aux objectifs de leur collecte, leur utilisation et la divulgation de ces informations des tiers, principes rpertoris dans la loi sur la protection de la vie prive de 1993, doivent tre respects. Ce matriel ne doit pas tre configur de manire passer des appels automatiques au numro d'urgence (111) mis en place par Telecom. Avis de compatibilit lectromagntique Ce manuel prsente les avis de rglementation relatifs aux fonctions avec et sans fil des diffrents pays et rgions, ainsi que des informations de conformit de l'ordinateur. Certains de ces avis ne s'appliquent peut-tre pas votre produit. Un ou plusieurs priphriques sans fil intgrs peuvent tre installs. Dans certains environnements, l'utilisation d'appareils sans fil peut tre limite. Ces restrictions peuvent s'appliquer dans les avions, dans les hpitaux, prs d'explosifs, dans des lieux dangereux, etc. Si vous n'tes pas sr des rgles qui s'appliquent ce produit, demandez si vous pouvez l'utiliser avant de le mettre sous tension. Avis de compatibilit lectromagntique 23 Avis de la FCC Cet quipement a t test et trouv conforme aux limitations relatives aux appareils numriques de classe B, en accord avec l'article 15 des rgles de la FCC. Ces limitations sont conues pour offrir une protection raisonnable contre les interfrences dans une installation rsidentielle. Cet quipement produit, utilise et peut mettre de l'nergie sous forme de radiofrquences. S'il n'est pas utilis conformment aux instructions, il peut produire des interfrences nuisibles aux communications radio. Cependant, il n'existe aucune garantie assurant qu'il n'y aura pas d'interfrence dans une installation particulire. Si l'utilisateur constate des interfrences lors de la rception d'missions de radio ou de tlvision (il suffit pour le vrifier d'allumer et d'teindre successivement l'appareil), il devra prendre l'une ou plusieurs des mesures suivantes pour les liminer savoir :
Rorienter ou repositionner l'antenne de rception. Accrotre la distance entre le matriel et le rcepteur. Brancher le matriel informatique une prise d'un circuit autre que celui auquel est branch le rcepteur. Demander conseil un revendeur ou un technicien de radio ou de tlvision expriment. Modifications La FCC requiert que l'utilisateur soit averti que toute modification de cet quipement non approuve expressment pas la socit Hewlett-Packard pourrait annuler le droit de l'utilisateur d'utiliser l'quipement. Cbles Les cbles branchs cet quipement doivent tre blinds et comporter des protections de connecteur mtalliques de type RFI/EMI pour tre conformes aux directives et rglementations de la FCC. 24 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Dclaration de conformit pour les produits portant le logo FCC (tats-Unis uniquement) Ce matriel est conforme l'alina 15 de la rglementation de la FCC. Son fonctionnement est sous rserve des deux conditions suivantes :
1. Cet quipement ne doit pas causer d'interfrences nuisibles et 2. Cet quipement doit accepter toute interfrence reue, y compris les interfrences capables de causer un mauvais fonctionnement. Si vous avez des questions au sujet de votre produit, crivez-nous l'adresse :
Hewlett-Packard Company P.O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Si vous avez des questions au sujet de la dclaration FCC, crivez-nous l'adresse :
Hewlett-Packard Company P.O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Ou appelez-nous au (281) 514-3333. Pour identifier ce produit, communiquez la rfrence ou le numro de srie ou de modle figurant sur le produit. Produits quips de priphriques LAN sans fil Ce produit peut tre quip d'un priphrique de rseau local sans fil. Ce priphrique ne doit pas tre situ au mme endroit ou fonctionner en mme temps qu'une autre antenne ou un autre metteur. AVERTISSEMENT ! Exposition des missions de radiofrquence La puissance de sortie mise par ce priphrique est infrieure aux limites de la FCC sur l'exposition des missions de radiofrquence. Nanmoins, le priphrique doit tre utilis de faon ce que les risques de contact physique soient rduits pendant le fonctionnement normal de l'appareil. Pendant le fonctionnement normal : Pour viter de dpasser les limites d'expositions aux frquences radio dictes dans la rglementation FCC, il est prfrable de ne pas s'approcher plus de 20 cm
(8 pouces) de l'antenne. Pour identifier l'emplacement des antennes sans fil, reportez-vous la documentation qui accompagne l'ordinateur. ATTENTION : Si vous utilisez un rseau local sans fil IEEE 802.11a, l'appareil ne doit tre utilis qu' l'intrieur d'un btiment, car il fonctionne dans une bande de frquences allant de 5,15 5,25 GHz. Il s'agit d'une rglementation de la FCC visant rduire le risque d'interfrences nuisibles aux systmes mobiles par satellite utilisant les mmes canaux. Les bandes de frquences allant de 5,25 5,35 GHz et de 5,65 5,85 GHz sont rserves aux stations radars trs puissantes. Celles-ci peuvent causer des interfrences et/ou endommager l'appareil. Dclaration sur les tlcommunications pour l'Australie The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of ACA Technical Standard TS008. AVERTISSEMENT ! Modems without integral RJ-11 that are shipped with this computer must be installed only in devices displaying the A-tick. Avis de compatibilit lectromagntique 25 Avis pour le Brsil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. ATTENTION : A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Avis pour le Canada Cet appareil numrique de classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. Si cet appareil dispose d'une fonctionnalit WLAN ou Bluetooth, il est conforme aux normes RSS pour les appareil exempts de licence d'Industrie Canada. Son fonctionnement est sous rserve des deux conditions suivantes : (1) cet appareil ne doit pas provoquer d'interfrences et
(2) cet appareil doit tolrer toute interfrence, notamment les interfrences pouvant engendrer un mauvais fonctionnement de l'appareil. AVERTISSEMENT ! Exposition aux radiations de frquence radio La puissance de rayonnement de cet appareil est infrieure aux limites d'exposition aux radiations mises par les frquences radio dictes par Industrie Canada. Toutefois, l'appareil doit tre utilis de sorte que les possibilits de contact humain soient rduites au maximum pendant son fonctionnement normal. Pendant le fonctionnement normal : Pour viter de dpasser les limites d'exposition aux frquences radio dictes par Industrie Canada, il est prfrable de ne pas s'approcher plus de 20 cm
(8 pouces) des antennes. Pour identifier l'emplacement des antennes sans fil, reportez-vous la documentation qui accompagne l'ordinateur. ATTENTION : En cas d'utilisation d'un rseau LAN IEEE 802.11a, ce produit doit uniquement tre utilis l'intrieur d'un btiment, en raison de son fonctionnement sur la plage de frquence de 5,15 5,25 GHz. Industrie Canada exige que ce produit soit utilis l'intrieur d'un btiment pour la plage de frquence allant de 5,15 5,25 GHz afin de rduire le risque d'interfrences prjudiciables pour les systmes de satellites mobiles utilisant le mme canal. Les plages de 5,25 5,35 GHz et de 5,65 5,85 GHz sont alloues prioritairement aux radars haute puissance. Ces stations radar peuvent provoquer des interfrences avec cet appareil ou l'endommager. L'antenne de cet appareil ne se remplace pas. Toute tentative de modification par l'utilisateur peut endommager l'ordinateur. Avis pour l'Union europenne Dclaration de conformit Les produits portant la marque CE sont conformes une ou plusieurs directives de l'UE suivantes, le cas chant :
Directive relative la basse tension 2006/95/CE Directive EMC 2004/108/CE Directive Ecodesign 2009/125/CE Directive R&TTE 1999/5/CE Directive RoHS 2011/65/CE 26 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles La conformit CE de ce produit n'est valide que s'il est aliment par un adaptateur secteur estampill CE (le cas chant) et un cordon d'alimentation fournis par HP. Reportez-vous la section Cordons d'alimentation requis la page 39. La conformit ces directives implique la conformit aux normes europennes harmonises applicables (normes europennes) qui sont prsentes dans la dclaration de conformit de l'UE dicte par HP pour ce produit ou cette gamme de produits et disponibles soit dans la documentation du produit soit sur le site Web suivant : www.hp.eu/certificates (effectuez une recherche partir du nom de modle du produit ou de son numro de produit, accessible sur l'tiquette de conformit). La conformit est reprsente par la marque de conformit CE ci-aprs. Pour certains produits de tlcommunications, le numro 4 chiffres d'un organisme de certification peut tre ajout en suffixe. Reportez-vous l'tiquette de conformit appose sur le produit. La fonctionnalit de tlcommunications de ce produit peut tre utilise dans les pays de l'Union europenne et de l'AELE suivants : Allemagne, Autriche, Belgique, Bulgarie, Chypre, Danemark, Espagne, Estonie, Finlande, France, Grce, Hongrie, Irlande, Islande, Lettonie, Liechtenstein, Lituanie, Luxembourg, Malte, Norvge, Pays-Bas, Pologne, Portugal, Rpublique tchque, Roumanie, Royaume-Uni, Slovaquie, Slovnie, Sude et Suisse. Pour toute question portant sur les rglementations, envoyez un courrier : Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Allemagne. Produits quips de modules sans fil CET APPAREIL EST CONFORME AUX NORMES INTERNATIONALES EN MATIRE D'EXPOSITION AUX RAYONNEMENTS DE FRQUENCE RADIO. Le module sans fil intgr votre ordinateur est un metteur et rcepteur radio. Cet appareil est conu pour ne pas dpasser les limites d'exposition aux frquences radio dfinies par des directives internationales (ICNIRP). Ces limites sont dfinies dans le cadre de directives qui tablissent les niveaux autoriss de rayonnements de frquence radio pour l'ensemble de la population. Ces directives, dictes par des organismes scientifiques indpendants, s'appuient sur une valuation rgulire et minutieuse de diffrentes tudes scientifiques. Cet appareil est galement conforme aux directives R&TTE europennes relatives la protection de la sant et de la scurit des personnes. La norme d'exposition dfinie pour les appareils mobiles utilise une unit de mesure appele SAR
(Specific Absorption Rate, taux d'absorption spcifique).* Ce taux a t obtenu via des tests au cours desquels les appareils ont effectu des transmissions au niveau de puissance certifi le plus lev, dans toutes les bandes de frquence. Le taux SAR rel de l'appareil en cours de fonctionnement peut tre bien infrieur la valeur maximale dfinie, dans la mesure o il fonctionne diffrents niveaux de puissance et utilise uniquement la puissance requise pour atteindre le rseau. Install dans l'ordinateur, cet appareil est conforme aux directives en matire d'exposition aux frquences radio lorsque les antennes se trouvent une distance minimale du corps. Pour transmettre des donnes ou des messages, l'appareil doit disposer d'une connexion de qualit au rseau. Dans certains cas, les transmissions de donnes ou de messages peuvent tre retardes jusqu' ce qu'une connexion soit disponible. Veillez respecter la distance conseille jusqu' la fin de la transmission. Avis de compatibilit lectromagntique 27
*Les directives internationales autres que celles de la FCC indiquent que la limite SAR pour les appareils mobiles utiliss par le grand public est de 2 watts/kilogramme (W/kg), calcul sur une moyenne de 10 grammes de masse tissulaire. Ces directives incluent une marge de scurit importante pour une protection accrue du grand public et pour tenir compte des variations dans les mesures. Les valeurs SAR peuvent varier selon les exigences locales en matire de reporting et selon la bande du rseau. Cet quipement intgre un appareil de transmission et rception radiolectrique. Lors d'une utilisation standard, l'observation d'une distance de sparation de 20 cm permet aux niveaux d'exposition des frquences radio de respecter la conformit des normes australiennes et no-zlandaises. Dclaration relative au rseau tlphonique europen (modem/fax) Le produit ci-joint est conforme aux spcifications de la directive 1999/5/CE (annexe II) sur les quipements hertziens et quipements terminaux de tlcommunications et porte en consquence la marque CE. Cependant, des diffrences existant entre les rseaux tlphoniques publics commuts
(RTPC) nationaux prsents dans les diffrents pays/rgions, cette homologation en elle-mme ne garantit pas la russite de toutes les oprations sur tous les points de terminaison du RTPC. En cas de problme, prenez contact avec le fournisseur auprs duquel vous vous tes procur votre quipement. L'quipement a t conu pour fonctionner avec les rseaux DTMF analogiques. Cet quipement peut connatre des difficults d'interconnexion sur les rseaux RTPC prenant uniquement en charge la composition impulsions. Contactez votre oprateur rseau pour bnficier d'une aide supplmentaire. Avis sur l'ergonomie Allemagne (texte en franais) Un systme informatique compos de produits de marque HP est conforme aux exigences allemandes en matire d'ergonomie si tous les produits utiliss portent la marque d'homologation GS , par exemple l'ordinateur de bureau, le clavier, la souris et le moniteur. Allemagne (texte en allemand) Ein aus HP Produkten bestehendes Computersystem erfllt die anwendbaren ergonomischen Anforderungen, wenn alle verwendeten Komponenten das GS Zeichen tragen, wie z. B. Business Desktop PC, Tastatur, PC-Maus und Bildschirm. Avis pour le Japon B VCCI-B 28 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Marques de certification des priphriques WLAN et Bluetooth If this device contains radio equipment, it is certified radio equipment. Avis pour la Core du Sud Avis de compatibilit lectromagntique 29 Avis pour le Mexique Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Si su producto se brinda con accesorios inalmbricos como un teclado o un mouse y necesita identificar el modelo del accesorio, consulte la etiqueta incluida en ese accesorio. Avis pour Tawan 30 Chapitre 2 Avis de rglementation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles 3 Avis de scurit pour les ordinateurs portables AVERTISSEMENT ! Pour rduire les risques de blessures graves, lisez le manuel Scurit et ergonomie du poste de travail. Il dcrit l'installation du poste de travail, la posture ainsi que les conditions de scurit et de travail appropries pour les utilisateurs, et fournit des informations importantes sur la scurit lectrique et mcanique. Vous trouverez ce manuel sur le Web l'adresse http://www.hp.com/ergo, ainsi que sur le CD de documentation qui accompagne le produit. Notice d'avertissement relative la chaleur AVERTISSEMENT ! Pour viter tout risque de blessure associe la chaleur ou de surchauffe de l'ordinateur, ne placez pas ce dernier sur vos genoux et n'obstruez pas ses ouvertures d'aration. Utilisez toujours l'ordinateur sur une surface plane et rigide. La ventilation ne doit pas tre entrave par des lments rigides, tels qu'une imprimante, ni par des lments souples, tels que des coussins, du tissu ou un tapis pais. De mme, l'adaptateur secteur ne doit rester en contact ni avec la peau ni avec un lment souple, tel que des coussins, un vtement ou un tapis lorsque l'ordinateur est en cours de fonctionnement. L'ordinateur et l'adaptateur secteur sont conformes aux limites de temprature de surface accessible l'utilisateur, dfinies par la norme internationale sur la scurit du matriel informatique (CEI/EN 60950). Avis sur les risques lis la scurit Si vous observez l'une des situations suivantes (ou avez d'autres inquitudes en matire de scurit), n'utilisez pas l'ordinateur : bruit de crpitement, de sifflement ou de claquement ou forte odeur/fume en provenance de l'ordinateur. La survenue de l'une de ces situations est normale en cas de dfaillance d'un composant lectronique interne de manire neutralise et contrle. Cependant, ces situations peuvent galement indiquer un risque de scurit. Ne partez pas du principe qu'il s'agit d'une dfaillance neutralise. Mettez l'ordinateur hors tension, dconnectez-le de sa source d'alimentation, puis contactez le support technique. Notice d'avertissement relative la chaleur 31 Avis sur les batteries remplaables par l'utilisateur AVERTISSEMENT !
batterie d'un type incorrect. liminez les batteries usages en respectant les instructions. Il existe un risque d'explosion en cas de remplacement de la batterie par une AVERTISSEMENT ! Pour rduire le risque d'incendie ou de brlures, abstenez-vous de dmonter, d'craser, de perforer, de jeter dans l'eau ou dans le feu une batterie, ou encore de court-circuiter ses connecteurs externes. AVERTISSEMENT ! Ne laissez pas les batteries la porte des enfants. AVERTISSEMENT ! Pour limiter les risques lis la scurit, n'utilisez que la batterie fournie avec l'ordinateur, une batterie de remplacement fournie par HP ou une batterie compatible achete comme accessoire auprs de HP. Avis sur le niveau du volume du casque et des couteurs AVERTISSEMENT ! L'coute prolonge de musique un volume lev peut endommager votre acuit auditive. Pour rduire le risque de diminution de l'acuit auditive, baissez le volume un niveau modr et agrable et minimisez le temps d'coute des volumes levs. Pour votre scurit, rinitialisez toujours le volume avant d'utiliser un casque ou des couteurs. Le volume sonore de certains de ces appareils peut tre plus lev que d'autres, mme si le rglage est identique. Toute modification des paramtres audio ou d'galisation par dfaut peut entraner une augmentation du volume et doit tre effectue avec prcaution. Pour votre scurit, utilisez uniquement des casques ou des couteurs respectant les limites dfinies par la norme EN 50332-2. Si l'ordinateur comporte un casque ou des couteurs, cette combinaison respecte la norme EN 50332-1. 32 Chapitre 3 Avis de scurit pour les ordinateurs portables Avis sur les cordons d'alimentation AVERTISSEMENT ! Pour rduire les risques d'lectrocution ou de dtrioration du matriel :
Branchez le cordon d'alimentation sur une prise secteur facilement accessible. Coupez l'alimentation de l'ordinateur en dbranchant le cordon d'alimentation de la prise secteur
(plutt que de l'ordinateur). Si l'ordinateur portable est fourni avec une fiche tripolaire, branchez le cordon sur une prise lectrique tripolaire relie la terre. Ne dsactivez pas la broche de mise la terre du cordon d'alimentation en utilisant, par exemple, un adaptateur bipolaire. La broche de mise la terre constitue un lment de scurit essentiel. AVERTISSEMENT ! Pour limiter les problmes de scurit potentiels, n'utilisez avec cet ordinateur que l'adaptateur secteur fourni avec l'ordinateur, un adaptateur secteur de remplacement fourni par HP ou un adaptateur secteur achet comme accessoire auprs de HP. Nettoyage du clavier AVERTISSEMENT ! Pour rduire les risques d'lectrocution ou de dtrioration des composants internes, n'utilisez pas d'aspirateur pour nettoyer le clavier. Un aspirateur peut dposer de la poussire sur la surface du clavier. Nettoyez rgulirement le clavier pour viter que les touches ne deviennent collantes et pour liminer la poussire, les peluches et les particules qui risquent de se loger sous les touches. Utilisez une bombe dpoussirante air comprim avec embout directionnel permettant d'insuffler de l'air sous le clavier et autour des touches pour retirer les particules. Avis sur les dplacements AVERTISSEMENT ! Afin de rduire le risque de choc lectrique, d'incendie ou de dtrioration du matriel, n'essayez pas d'alimenter l'ordinateur au moyen d'un kit de conversion de tension destin aux quipements mnagers. Avis sur les cordons d'alimentation 33 Avis de scurit pour la Chine Chine : avis sur l'altitude Avis sur l'altitude pour les produits dont l'utilisation n'est pas certifie au-del de 5 000 m d'altitude 2000m ou 2000 Chine : avis sur une utilisation dans des conditions tropicales Avis pour les produits dont l'utilisation n'est pas certifie dans des conditions tropicales Norvge et Sude : notice de mise la terre des cbles pour les produits quips d'un tuner TV ATTENTION : Pour limiter les risques lis la scurit, utilisez un isolant voltaque lors de la connexion un systme de distribution par cble. 34 Chapitre 3 Avis de scurit pour les ordinateurs portables 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Informations importantes relatives la scurit AVERTISSEMENT ! Pour rduire les risques de blessures graves, lisez le manuel Scurit et ergonomie du poste de travail. Il dcrit l'installation du poste de travail, la posture ainsi que les conditions de scurit et de travail appropries pour les utilisateurs, et fournit des informations importantes sur la scurit lectrique et mcanique. Vous trouverez ce manuel sur le Web l'adresse http://www.hp.com/ergo, ainsi que sur le CD de documentation qui accompagne le produit. Afin d'viter tout risque de choc lectrique ou de dommages votre quipement :
Ne dsactivez pas la prise de mise la terre du cordon d'alimentation. La prise de mise la terre constitue un lment de scurit essentiel. Branchez le cordon d'alimentation sur une prise mise la terre facilement accessible. Coupez l'alimentation du client lger en dbranchant le cordon d'alimentation de la prise secteur. L'ordinateur peut tre trs lourd ; assurez-vous d'adopter une position ergonomique adquate lors de sa manipulation. Installez l'ordinateur proximit d'une prise secteur. Le cordon d'alimentation secteur constitue le principal dispositif de dconnexion secteur de votre ordinateur et doit donc tre facilement accessible. Pour votre scurit, le cordon d'alimentation fourni avec votre ordinateur est quip d'une broche de mise la terre. Utilisez toujours le cordon d'alimentation avec une prise murale correctement relie la terre, afin de rduire les risques d'lectrocution. Pour rduire les risques de choc lectrique en provenance du rseau tlphonique, branchez votre ordinateur dans une prise secteur avant de le connecter une ligne tlphonique. Par ailleurs, dconnectez votre ligne tlphonique avant de dbrancher votre ordinateur de la prise secteur. Dbranchez le cordon du modem du rseau tlphonique avant d'installer ou d'enlever le capot de votre ordinateur. N'utilisez pas l'ordinateur lorsque le capot est enlev. Pour plus de scurit, dbranchez toujours l'ordinateur de sa source d'alimentation, de tout systme de tlcommunications (comme les lignes tlphoniques), des rseaux et des modems avant d'excuter toute opration de maintenance. Si vous ne respectez pas ces consignes, vous risquez de vous blesser ou de causer des dommages matriels. Le modem et l'alimentation de ce produit renferment des niveaux de tension dangereux. Informations importantes relatives la scurit 35 ATTENTION : Si votre ordinateur est quip d'un commutateur de slection de tension destin aux systmes fonctionnant sous 115 ou 230 V, ce commutateur a t prdfini sur la tension en vigueur dans le pays/rgion o il a t vendu initialement. Mettre le commutateur sur la mauvaise position peut endommager l'ordinateur et annuler toute garantie implicite. Ce produit n'a pas t valu pour une connexion un systme d'alimentation informatique (un systme de distribution de courant alternatif sans connexion directe la terre, selon la norme CEI/EN 60950). Conditions d'installation Consultez les instructions d'installation avant de brancher cet quipement l'alimentation. AVERTISSEMENT ! L'quipement doit tre pourvu d'un raccordement la terre protecteur secteur appropri. Cet ordinateur peut contenir des pices sous tension et amovibles. Dbranchez le cordon d'alimentation avant de retirer le botier. Remettez le botier bien en place avant de remettre l'ordinateur sous tension. Avis sur le remplacement de la batterie AVERTISSEMENT ! Le produit peut contenir une pile ou un module de batterie interne alcalin, au dioxyde de lithium manganse ou au pentoxyde de vanadium. Il y a danger d'incendie et de brlures s'il n'est pas manipul correctement. Pour rduire les risques de blessure :
N'essayez pas de recharger la batterie. vitez de la soumettre des tempratures suprieures 60 C (140 F). N'essayez pas de dmonter, d'craser, de percer la batterie, ni de court-circuiter ses bornes ou de la jeter dans le feu ou l'eau. Il existe un risque d'explosion en cas de remplacement de la batterie par une batterie d'un type incorrect. liminez les batteries usages en respectant les instructions. Remplacez uniquement par une batterie HP prvue pour ce produit. Pour plus d'informations sur le retrait d'une batterie, reportez-vous la documentation de l'ordinateur. Les piles, modules de batterie et accumulateurs ne doivent pas tre jets avec les ordures mnagres. Pour permettre leur recyclage ou leur mise au rebut, veuillez utiliser les systmes de collecte publique ou renvoyez-les HP, un partenaire HP agr ou leurs agents. Taiwan EPA demande aux fabricants ou aux importateurs de piles, conformment l'Article 15 de la loi relative la mise au rebut (Waste Disposal Act), d'indiquer les mentions de rcupration des piles usages dans des points de vente, brochures ou publicits. Contactez une entreprise de recyclage qualifie pour la mise au rebut approprie de la pile. 36 Chapitre 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis sur le volume des casques et des couteurs AVERTISSEMENT ! L'coute prolonge de musique un volume lev peut endommager votre acuit auditive. Pour rduire le risque de diminution de l'acuit auditive, baissez le volume un niveau modr et agrable et minimisez le temps d'coute des volumes levs. Pour votre scurit, rinitialisez toujours le volume avant d'utiliser un casque ou des couteurs. Le volume sonore de certains de ces appareils peut tre plus lev que d'autres, mme si le rglage est identique. Toute modification des paramtres audio ou d'galisation par dfaut peut entraner une augmentation du volume et doit tre effectue avec prcaution. Si l'ordinateur est quip d'un casque d'coute ou d'couteurs et qu'il porte le sigle GS , cette combinaison est en conformit avec la norme EN 50332-1. Pour votre propre scurit, les casques d'coute ou les couteurs utiliss avec ces produits doivent tre en conformit avec les limitations des casques de la norme EN 50332-2. Informations de scurit relatives au laser Pour les produits quips d'units optiques ou d'metteurs fibre optique. Ce produit peut tre quip d'un priphrique de stockage optique (c'est--dire un lecteur CD ou DVD) et/ou d'un metteur-rcepteur fibre optique. Ces lments comportent des lasers classs dans la catgorie des produits laser de classe 1, conformment la norme IEC/EN 60825-1, et sont conformes ses exigences. Chacun de ces produits laser est conforme aux rgulations 21 CFR 1040.10 et 1040.11 de la US FDA ou est conforme ces normes l'exception des diffrences conformment la notice des lasers No. 50, du 24 Juin 2007. AVERTISSEMENT ! L'utilisation de mthodes de contrle ou de rglage ou de procdures, autres que celles indiques dans ce document ou dans le manuel d'installation des appareils rayon laser, peut exposer l'utilisateur des radiations dangereuses. Pour rduire le risque d'exposition un rayonnement dangereux :
N'essayez pas d'ouvrir le botier du module. Il ne contient pas de pice rparable par l'utilisateur. N'effectuez pas de commandes, de rglages ou d'oprations sur l'appareil laser, autres que ceux indiqus dans le prsent manuel. Seuls les techniciens agrs HP sont autoriss rparer l'unit. Exigences relatives au bloc d'alimentation et au cordon d'alimentation Exigences relatives la mise la terre des alimentations de classe 1 Pour tre protg contre les courants de dfaut, l'quipement doit tre raccord une borne de terre. Branchez le cordon d'alimentation sur une prise secteur disposant d'une mise la terre raccorde la terre. Les cordons d'alimentation de remplacement ne fournissent pas une protection adquate contre les dfauts. Utilisez exclusivement le cordon d'alimentation fourni avec ce produit ou un cordon de remplacement agr par Hewlett-Packard. Avis sur le volume des casques et des couteurs 37 Danemark For tilslutning af de vrige ledere, se medflgende installationsvejledning. Finlande Laite on liitettv suojamaadoituskoskettimilla varustettuun pistorasiaan. Norvge Apparatet m kun tilkoples jordet stikkontakt. Sude Apparaten skall anslutas till jordat uttag, nr den ansluts till ett ntverk. Exigences relatives l'alimentation Les alimentations sur certains produits sont quipes de commutateurs de tension externes. La fonction de slection de tension sur le produit autorise son fonctionnement sous toute tension comprise entre 100-127 ou 200-240 volts secteur. Les alimentations sur les produits dpourvus de commutateurs de tension externes sont quipes de circuits internes qui dtectent la tension d'entre et basculent automatiquement sur la tension approprie. Pour des raisons de scurit, n'utilisez que l'adaptateur secteur fourni avec l'quipement ou un adaptateur de remplacement autoris par Hewlett-Packard. Les rfrences de remplacement sont disponibles l'adresse http://www.hp.com/cgi-bin/hpsupport/index.pl. Pour une utilisation en Norvge Ce produit est galement conu pour un systme lectrique informatique avec tension phase-phase de 230 V. 38 Chapitre 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Cordons d'alimentation requis Le cordon d'alimentation fourni avec le produit est conforme aux rglementations en vigueur dans le pays o le matriel a t achet l'origine. N'utilisez que le cordon d'alimentation fourni avec l'quipement ou un cordon d'alimentation de remplacement de Hewlett-Packard ou d'une source HP agre. Les rfrences de remplacement sont disponibles l'adresse http://www.hp.com/cgi-bin/
hpsupport/index.pl. Les cordons d'alimentation destins tre utiliss dans d'autres pays doivent respecter les normes du pays o vous utilisez le produit. Pour plus d'informations sur les exigences de cordon d'alimentation, contactez votre revendeur, votre mainteneur ou votre fournisseur de services agr HP. AVERTISSEMENT ! N'utilisez pas de cordons d'alimentation d'autres produits. Un mauvais cordon d'alimentation peut entraner un risque de dcharge lectrique ou d'incendie. Les exigences prsentes ci-aprs s'appliquent tous les pays. 1. 2. Le cordon d'alimentation doit tre homologu par une agence accrdite, responsable de l'valuation dans le pays o le cordon sera install. La longueur du cordon doit tre comprise entre 1,8 m (6 pieds) and 3,6 m (12 pieds). Pour un cordon d'alimentation de 2 m (6,56 pieds) ou moins, le diamtre du cordon doit tre d'au minimum 0,75 mm2 ou 18 AWG. Si le cordon d'alimentation dpasse 2 m (6,56 pieds), le diamtre du cordon doit tre d'au minimum 1 mm2 ou 16 AWG. Le cordon d'alimentation doit tre branch un endroit dgag o il ne risque pas d'tre pitin ou coinc par des objets. Accordez une attention particulire la fiche, la prise murale et l'endroit o le cordon sort du botier de l'appareil. AVERTISSEMENT ! N'utilisez pas ce produit avec un cordon d'alimentation endommag. Si le cordon d'alimentation est endommag de quelque manire que ce soit, remplacez-le immdiatement. Un cordon endommag peut entraner des risques de blessure. Spcifications du cordon d'alimentation pour le Japon Pour une utilisation au Japon, utilisez uniquement le cordon d'alimentation fourni avec l'appareil. ATTENTION : N'utilisez pas le cordon d'alimentation fourni avec ce produit pour alimenter d'autres appareils. Risque de pincement AVERTISSEMENT ! Observez les zones risque de pincement. N'approchez pas vos doigts des pices se refermant. Risque de pincement 39 Avis de scurit pour la Chine Chine : avis sur l'altitude Avis sur l'altitude pour les produits dont l'utilisation n'est pas certifie au-del de 5 000 m d'altitude 2000m ou 2000 Chine : avis sur une utilisation dans des conditions tropicales Avis pour les produits dont l'utilisation n'est pas certifie dans des conditions tropicales 40 Chapitre 4 Avis de scurit pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Avis d'acoustique pour l'Allemagne Le niveau de pression acoustique (LpA) est nettement en dessous de 70 dB(A) (position oprateur, fonctionnement normal, selon ISO 7779). Les donnes d'mission de bruit acoustique sont disponibles dans les dclarations IT ECO relatives au produit, l'adresse : http://www.hp.com/go/ted Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO 7779) Die Schallemissionswerte der Produkte knnen in den produktbezogenen IT ECO Declarations auf folgender Internet Adresse gefunden werden: http://www.hp.com/go/ted Avis d'acoustique pour l'Allemagne 41 5 Avis sur les conditions d'utilisation pour les ordinateurs portables Ce chapitre prsente des avis relatifs l'environnement des diffrents pays ou rgions et des informations de conformit. Certains de ces avis ne s'appliquent peut-tre pas votre produit. Recyclage du matriel lectronique et de la batterie HP encourage ses clients recycler l'quipement lectronique usag, les cartouches d'impression HP d'origine et les batteries rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site Web HP : http://www.hp.com/recycle. Mise au rebut des quipements par les utilisateurs Ce symbole indique que vous ne devez pas jeter votre produit avec les dchets mnagers. Il est de votre responsabilit de protger la sant et l'environnement et d'liminer votre quipement en le remettant une dchetterie effectuant le recyclage des quipements lectriques et lectroniques. Pour plus d'informations, prenez contact avec votre service d'limination des ordures mnagres ou ouvrez la page http://www.hp.com/recycle. Substances chimiques HP s'engage fournir ses clients des informations sur les substances chimiques contenues dans ses produits conformment aux dispositions lgales telles que REACH (rglement CE numro 1907/2006 du Parlement europen et du Conseil). Un rapport d'informations sur la conformit des substances chimiques de ce produit est disponible l'adresse : http://www.hp.com/go/reach. 42 Chapitre 5 Avis sur les conditions d'utilisation pour les ordinateurs portables Avis sur l'environnement pour la Chine http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/chinasepa.html http://www.hp.com.cn/hardwarerecycle
( http://www. sepa.gov.cn) Avis sur la restriction des substances dangereuses pour la Chine (RoHS) Tableau des substances/composants toxiques et dangereux et leur contenu conformment aux mthodes de gestion du contrle de la pollution par les produits d'informations lectroniques de Chine Substances et composants toxiques et dangereux Nom de la pice Plomb
(Pb) Mercure
(Hg) Cadmium
(Cd) Batterie Cbles Camra Chssis/Autre Lecteur de carte mmoire flash Lecteur de disquette Disque dur Casque Cartes PCA d'entre/
sortie Clavier cran LCD X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O Chrome hexavalent
(Cr(VI)) Diphnyles polybroms (PBB) thers diphnyles polybroms
(PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Avis sur l'environnement pour la Chine 43 Substances et composants toxiques et dangereux Nom de la pice Support (CD/DVD/
disquette) Mmoire Carte mre, processeur, dissipateurs thermiques Souris Unit de disque optique Priphrique d'amarrage en option Adaptateur d'alimentation Source d'alimentation Tlcommande Lecteur de carte Smart Card/Java Haut-parleurs externes Tuner TV Unit mmoire flash USB Concentrateur USB Webcam Rcepteur sans fil Cartes sans fil Plomb
(Pb) Mercure
(Hg) Cadmium
(Cd) O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Chrome hexavalent
(Cr(VI)) Diphnyles polybroms (PBB) thers diphnyles polybroms
(PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O : Indique que la quantit de substance toxique ou dangereuse contenue dans tous les matriaux homognes de cette pice se situe en dessous de la limite fixe par la norme SJ/T11363-2006. X : Indique que cette substance toxique ou dangereuse contenue dans au moins un matriel homogne utilis dans ce composant est au-dessus de la limite dans SJ/T11363-2006. Tous les lments du tableau accompagns d'un X sont conformes la directive europenne 2002/95/EC du 27 janvier 2003, dite RoHS (Restriction d'utilisation de substances dangereuses pour l'environnement relative aux dchets d'quipements lectriques et lectroniques) et ses amendements. REMARQUE : La dure d'utilisation cologique en anne, en rfrence, a t dtermine sur la base de conditions normales d'utilisation du produit, telles que la temprature et l'humidit. 44 Chapitre 5 Avis sur les conditions d'utilisation pour les ordinateurs portables
/
I/O PCA
(LCD) CD/DVD/
/Java USB USB
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB) (PBDE) X X X X X X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T11363-2006 X SJ/T11363-2006 X RoHS 2003 1 27 2002/95/EC
:
Avis sur la restriction des substances dangereuses pour la Chine (RoHS) 45 Dclaration de contenu de l'quipement pour le Japon Une norme japonaise, dfinie par la spcification JIS C 0950, 2008, oblige les fabricants fournir des dclarations de contenu de matriel pour certaines catgories de produits lectroniques proposes la vente aprs le 1 juillet 2006. Pour afficher la dclaration de matriel JIS C 0950 de ce produit, rendez-vous sur le site Web HP : http://www.hp.com/go/jisc0950. Loi du Mexique sur l'utilisation durable de l'nergie Ce produit a t tiquet conformment la loi du Mexique sur l'utilisation durable de l'nergie exigeant la divulgation de la consommation nergtique en utilisation normale (mode inactif) et en mode veille. Votre produit correspond l'une des nombreuses configurations de cette famille de modle ; la consommation nergtique du mode inactif de votre configuration spcifique peut tre diffrente des informations figurant sur l'tiquette. La consommation nergtique relle de votre produit peut tre suprieure ou infrieure la valeur signale sur l'tiquette de l'nergie du produit au Mexique en raison de facteurs tels que la configuration (composants et modules choisis) et de l'utilisation (tches ralises, logiciels installs et excuts, etc.). Rglementation EEE de la Turquie En conformit avec la rglementation EEE EEE Ynetmeliine Uygundur Restriction d'utilisation de substances dangereuses pour l'Ukraine L'quipement est conforme aux exigences relatives aux rglementations techniques, approuves par la rsolution du Cabinet des ministres de l'Ukraine date du 3 dcembre 2008 1057, en termes de restrictions quant l'utilisation de certaines substances dangereuses dans les quipements lectroniques et lectriques.
, 3 2008 1057. Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire Voir http://www.dtsc.ca.gov/hazardouswaste/perchlorate. La batterie de l'horloge en temps rel ou la pile bouton de ce produit est susceptible de contenir du perchlorate et peut ncessiter une manipulation particulire lors de son recyclage ou de sa mise au rebut en Californie. 46 Chapitre 5 Avis sur les conditions d'utilisation pour les ordinateurs portables 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Recyclage du matriel lectronique et des batteries Hewlett-Packard encourage ses clients recycler le matriel lectronique usag, les cartouches d'impression de marque HP et les batteries rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site http://www.hp.com/recycle. Pour obtenir des informations concernant le recyclage du produit au Japon, reportez-vous http://www.hp.com/jp/hardwarerecycle/. Mise au rebut des quipements par les utilisateurs Ce symbole indique que vous ne devez pas jeter votre produit avec les dchets mnagers. Il est de votre responsabilit de protger la sant et l'environnement et d'liminer votre quipement en le remettant une dchetterie effectuant le recyclage des quipements lectriques et lectroniques. Pour plus d'informations, prenez contact avec votre service d'limination des ordures mnagres ou ouvrez la page http://www.hp.com/recycle. Conformit ENERGY STAR (certains modles) REMARQUE : Cette section s'applique uniquement aux produits portant le logo Energy Star. En tant que partenaire ENERGY STAR, Hewlett-Packard Company a suivi pour le produit le processus de qualification et de certification renforc labor de l'agence amricaine pour la protection de l'environnement afin de s'assurer que les produits portant le logo ENERGY STAR sont agrs ENERGY STAR conformment aux lignes directrices d'ENERGY STAR en matire d'utilisation efficace de l'nergie. Le logo suivant est prsent sur tous les ordinateurs qualifis ENERGY STAR. Recyclage du matriel lectronique et des batteries 47 Le programme ENERGY STAR pour ordinateurs a t cr par l'EPA pour promouvoir l'conomie d'nergie et rduire la pollution de l'air grce des quipements plus conergtiques au sein des maisons, bureaux et usines. Une des faons de rendre les produits plus efficaces sur le plan nergtique consiste rduire la consommation lorsqu'elle n'est pas gre par la fonction Gestion de l'alimentation de Microsoft Windows. La fonction de gestion de l'alimentation permet la mise en veille de l'ordinateur aprs une priode d'inactivit de l'utilisateur. Lorsqu'elle est utilise avec un moniteur ENERGY STAR, cette fonction prend galement en charge les fonctions similaires de gestion de l'alimentation du moniteur externe. Afin de bnficier de cette conomie d'nergie, la fonction de gestion de l'alimentation a t prdfinie pour une mise en veille de l'ordinateur et du moniteur aprs une certaine priode d'inactivit :
Ordinateur Moniteur/cran intgr Ordinateurs de bureau et postes de travail Aprs 30 minutes Aprs 15 minutes Clients lgers et ordinateurs de bureau Sans objet Aprs 15 minutes Il suffit que l'utilisateur se serve d'un des priphriques d'entre de l'ordinateur (ex. : souris, clavier, etc.) pour que l'ordinateur et l'cran quittent le mode veille et se rallument. Lorsque la fonction Wake On LAN d'veil par appel rseau est active, il est galement possible de rallumer l'ordinateur l'aide d'un signal rseau. Pour plus d'informations sur le potentiel d'conomie nergtique et financire de la fonction Gestion de l'alimentation, reportez-vous au site Web consacr la gestion de l'alimentation ENERGY STAR de l'EPA : http://www.energystar.gov/powermanagement. Pour plus d'informations sur le programme ENERGY STAR et ses bienfaits sur l'environnement, reportez-vous au site Web ENERGY STAR de l'EPA : http://www.energystar.gov. ATTENTION : L'utilisation de la fonction d'conomie d'nergie du moniteur avec des moniteurs qui ne sont pas qualifis ENERGY STAR peut entraner une distorsion de l'image en cas de fermeture automatique pour conomie d'nergie. REMARQUE : ENERGY STAR n'est pas pris en charge sur les ordinateurs de bureau et les postes de travail configurs avec certaines versions de Linux ou FreeDOS. En cas de restauration du systme d'exploitation, vous devrez galement redfinir les paramtres ENERGY STAR (le cas chant) une fois la restauration effectue. Sous Windows 7, pour contrler les paramtres d'alimentation par dfaut de votre ordinateur de bureau ou station de travail, slectionnez Dmarrer > Panneau de configuration, puis tapez Options d'alimentation dans la fentre de recherche. 48 Chapitre 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Sous Windows 8, pour contrler les paramtres d'alimentation par dfaut de votre ordinateur de bureau ou station de travail, tapez alimentation dans l'cran d'accueil, slectionnez Paramtres, puis slectionnez Options d'alimentation dans la liste des applications. Substances chimiques HP s'engage fournir ses clients des informations sur les substances chimiques contenues dans ses produits, conformment aux normes juridiques en vigueur telles que le rglement concernant l'enregistrement, l'valuation et l'autorisation des substances chimiques, ainsi que les restrictions applicables ces substances (REACH, rglement CE N 1907/2006 du Parlement europen et du Conseil). Des informations sur les substances chimiques contenues dans ce produit sont disponibles l'adresse http://www.hp.com/go/reach. Avis sur le mercure Ce produit HP peut contenir les matriaux suivants qui requirent un traitement spcial la fin de leur cycle de vie :
Le mercure contenu dans la lampe fluorescente de l'cran cristaux liquides (LCD) Il se peut que l'limination du mercure soit rglemente en raison de considrations environnementales. Pour obtenir des informations sur l'limination et le traitement de cette substance, veuillez contacter les autorits locales concernes ou l'Electronic Industries Alliance (EIA)
(http://www.eiae.org). Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire La batterie de l'horloge en temps rel est susceptible de contenir du perchlorate et peut ncessiter une manipulation particulire lors de son recyclage ou de sa mise au rebut en Californie. Reportez-
vous au site http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. Avis sur la restriction des substances dangereuses pour la Chine (RoHS) Substances chimiques 49
I/O PCAs
O: SJ/T11363-2006
X: SJ/T11363-2006
XRoHS 20031272002/95/EC
The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products 50 Chapitre 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles Tableau 6-1 Toxic and Hazardous Substances and Elements Part Name Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent Chromium
(Cr(VI)) Polybromi-
nated biphenyls
(PBB) Polybromi-
nated diphenyl ethers (PBDE) Motherboard, processor and heat sink X Memory I/O PCAs Power supply Keyboard Mouse Chassis/Other Fans Internal/External Media Reading Devices External Control Devices Cable Hard Disk Drive Display X X X X X X X X X X X X O O O O O O O O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. REMARQUE : The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. Dclarations IT ECO Ordinateurs de bureau et clients lgers http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?
jumpid=reg_R1002_USEN Stations de travail http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Dclarations IT ECO 51 Avis sur la restriction des substances dangereuses pour le Japon (RoHS) 2008 JISC0950 2006 7 http://www.hp.com/go/jisc0950 A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Ley para el Aprovechamiento Sustentable de la Energa de Mxico (loi du Mexique sur l'utilisation durable de l'nergie) Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal
(modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). REMARQUE : Esta ley no es aplicable a los workstations. This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). REMARQUE : Workstations are not labeled because the law is not applicable to the workstation product category. Rglementation EEE de la Turquie Trkiye Cumhuriyeti: EEE Ynetmeliine Uygundur 52 Chapitre 6 Avis sur les conditions d'utilisation pour les ordinateurs de bureau, clients lgers et stations de travail personnelles
(restriction d'utilisation de substances dangereuses pour l'Ukraine)
, 3 2008 1057. The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
(restriction d'utilisation de substances dangereuses pour l'Ukraine) 53 Index A avis utilisation en vol 12 voyage 33 avis sur la mise au rebut des quipements 42 avis, ordinateurs de bureau, clients lgers et stations de travail avis sur la scurit des lasers 13 avis sur le niveau du volume, FCC (Federal Communications casque et couteurs 32 avis sur les appareils sans fil WWAN de Thalande 11 batterie 12, 46 batterie, remplacement par l'utilisateur 32 Brsil 5 Canada 5 clavier 33 cordon d'alimentation pour le Japon 18 cordons d'alimentation 18, 33 Core du Sud 10 environnement 42 ergonomie 8, 28 Japon 9 Macrovision Corporation 19 matriau compos de perchlorate 46 Mexique 10 mise au rebut des quipements 42 modem 14 niveau du volume du casque et des couteurs 32 restriction d'utilisation de Commission) 24 avis, ordinateurs portables FCC (Federal Communications Commission) 3 avis, restriction d'utilisation de substances dangereuses pour la Chine 43, 49 avis, restriction d'utilisation de substances dangereuses pour le Japon 52 avis de certification GS 8, 28 avis de restriction d'utilisation de substances dangereuses pour l'Ukraine 46 avis pour l'Union europenne 6, 26 avis pour la Core du Sud 10 avis pour le Brsil 5 avis pour le Canada 5 avis pour le Japon 9 avis pour Macrovision Corporation 19 substances dangereuses pour l'Ukraine 46 avis relatif au clavier 33 avis relatif aux appareils sans fil restriction d'utilisation de pour le Mexique 10 substances dangereuses pour la Chine 43, 49 avis sur l'altitude 34, 40 avis sur l'environnement pour la restriction d'utilisation de Chine 43 substances dangereuses pour le Japon 52 avis sur l'ergonomie 8, 28 avis sur la mise au rebut scurit des lasers 13 Singapour 11 Tawan 11 Union europenne 6, 26 batterie 46 batterie, remplacement par l'utilisateur 12 quipement 42 avis sur le niveau du volume du casque et des couteurs 32 avis sur les appareils sans fil pour Singapour 11 avis sur les appareils sans fil WWAN de Thalande 11 avis sur les conditions d'utilisation 42 avis sur les cordons d'alimentation 18, 33 avis sur les cordons d'alimentation pour le Japon 18 avis sur les dplacements 33 avis sur les modems 14 Canada 17 Japon 17 Nouvelle-Zlande 17 systme amricain 14 avis sur les modems pour la Nouvelle-Zlande 17 avis sur les modems pour le avis sur les modems pour le Canada 17 Japon 17 avis sur les modems pour les tats-Unis 14 avis sur les utilisations en vol 12 avis sur une utilisation dans des conditions tropicales 34, 40 avis tawanais 11 B batterie, avis 12, 32, 46 54 Index C conformit ENERGY STAR 12 D dclaration de conformit ordinateurs portables 4 dclaration de contenu de l'quipement pour le Japon 46 F FCC (Federal Communications Commission) avis sur les ordinateurs de bureau, clients lgers et stations de travail 24 avis sur les ordinateurs portables 3 cble des ordinateurs de bureau, clients lgers et stations de travail 24 cbles pour ordinateurs portables 3 modifications apportes aux ordinateurs portables 3 modifications des ordinateurs de bureau, clients lgers et stations de travail 24 L loi du Mexique sur l'utilisation durable de l'nergie 46 M matriel lectronique et de la batterie, recyclage 42 modifications, ordinateurs de bureau, clients lgers, stations de travail FCC (Federal Communications Commission) 24 N notice de mise la terre des cbles 34 notices restriction d'utilisation de substances dangereuses pour l'Ukraine 53 O ordinateurs portables, modifications FCC (Federal Communications Commission) 3 P priphrique matriel, identification 1 priphriques de rseau local sans fil 25 priphriques LAN sans fil 26 priphriques WLAN 4 R recyclage de la batterie 42 recyclage du matriel lectronique et de la batterie 42 restriction d'utilisation de substances dangereuses pour l'Ukraine 53 S support vocal 18 T tuner TV, notice de mise la terre des cbles 34 Index 55