all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 |
|
Compliance Insert | Users Manual | 121.31 KiB | ||||
1 2 3 4 5 |
|
QSG | Users Manual | 923.67 KiB | ||||
1 2 3 4 5 |
|
User Manual | Users Manual | 5.50 MiB | ||||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Setup Photos | |||||||
1 2 3 4 5 | Operational Description | |||||||
1 2 3 4 5 | Operational Description | |||||||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | External Photos | |||||||
1 2 3 4 5 | ID Label/Location Info | |||||||
1 2 3 4 5 | Internal Photos | |||||||
1 2 3 4 5 | Attestation Statements | |||||||
1 2 3 4 5 | RF Exposure Info |
1 2 3 4 5 | Compliance Insert | Users Manual | 121.31 KiB |
CN70 RFID, CN70e RFID Mobile Computer Compliance Insert Models 1000CP01F9, 1000CP02F9 Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with Intermec battery pack Model(s) 1000AB01 and 1000AB02 only. See battery instructions. For Power Supply use Intermec Model 9001AE02 or Model 9002AX02. No user-serviceable parts. Charge only with bases 1002UU01, 1002UU03, 1002UU04 or 1002UU05 using 1002UC01 or 1002UD01 adapters. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Radiation Exposure Statement Warning: This equipment complies with International Commission on Non-
Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization
(CENELEC) limits for exposure to radio frequency (RF) radiation. If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide a 1.2 cm (0.5 in.) space between the device and the body. To find RF exposure information, go to www.intermec.com > Products > Computers
(e.g.) > Handheld Computers (e.g.) > CN70 (e.g.) > Manuals tab and scroll down to Regulatory Information. Laser Compliance and Precaution The 1000CP01F9 and 1000CP02F9 are registered with the CDRH as a Class 2 LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630-670 nm. Caution: There are no user serviceable parts inside the 1000CP01F9 and 1000CP02F9. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-670 nm. Note: There are no controls or adjustments provided for routine operation or maintenance of the 1000CP01F9 and 1000CP02F9.
*Insert English LASER label here * Contact the product graphics department for label content. U.S.A. Digital Emissions Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the radio or television receiving antenna. 2. Increase the separation between the computer equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. 4. Consult the dealer or an experienced radio television technician for help. Canadian Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) 802.11a Radio Precaution Statement 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 34 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall comply with the e.i.r.p. limit. The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. For Users in Canada (fr)(Translate to French) Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with Intermec battery pack Model(s) 1000AB01 and 1000AB02 only. See battery instructions. For Power Supply use Intermec Model 9001AE02 or Model 9002AX02. No user-serviceable parts. Charge only with bases 1002UU01, 1002UU03, 1002UU04 or 1002UU05 using 1002UC01 or 1002UD01 adapters. Use of incorrect charger may present a risk of fire or explosion. Battery Recycling Information This product contains or uses a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. 802.11 Radio Precaution Statement Caution: Users are responsible for configuring the channels of operation that comply with their country regulatory standards. A Wireless Network Administrator should review the operating restrictions detailed within the Access Point installation manual. Radiation Exposure Statement Warning: This equipment complies with International Commission on Non-
Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and European Committee for Electrotechnical Standardization
(CENELEC) limits for exposure to radio frequency (RF) radiation. If a body worn accessory is not purchased from Intermec, the accessory must contain no metal and provide a 1.2 cm (0.5 in.) space between the device and the body. Tech Com will assign the appropriate path ):
To find RF exposure information, go to www.intermec.com > Products > Computers
(e.g.) > Handheld Computers (e.g.) > CN70 (e.g.) > Manuals tab and scroll down to Regulatory Information. Laser Compliance and Precaution The 1000CP01F9 and 1000CP02F9 are registered with the CDRH as a Class 2 LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum output of 1 mW at 630-670 nm. Caution: There are no user serviceable parts inside the 1000CP01F9 and 1000CP02F9. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-670 nm. Note: There are no controls or adjustments provided for routine operation or maintenance of the 1000CP01F9 and 1000CP02F9. Digital Emissions Compliance This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) 802.11a Radio Precaution Statement 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 34 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite System (MSS) operations. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall comply with the e.i.r.p. limit. The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
1 2 3 4 5 | QSG | Users Manual | 923.67 KiB |
The CK70 ships with a partially charged battery. You will need a DX1, DX2, or DX4 multidock and a power supply to charge the battery. Das Modell CK70 wird mit einem teilweise geladenen Akkusatz ausgeliefert. Es wird ein DX1, DX2 oder DX4 Multidock und ein Netzteil zum Laden des Akkus bentigt. El modelo CK70 se enva con una batera parcialmente cargada. Necesitar un multi-
acoplador DX1, DX2 DX4 y una fuente de alimentacin para cargarla. Le CK70 est fourni avec une pile partiellement charge. Vous aurez besoin dun multi-
socle DX1, DX2 ou DX4 et dun bloc dalimentation pour charger la pile. CK70 dikirim bersama baterai yang setengah terisi. Anda akan memerlukan dok majemuk DX1, DX2, atau DX4 dan catu daya untuk mengisi baterai. CK70 DX1DX2 DX4 CK70 . DX1, DX2, DX4 - . O CK70 fornecido com uma bateria parcialmente carregada. Para carreg-la, sero necessrias mltiplas bases DX1, DX2 ou DX e uma fonte de alimentao. CK70 .
, DX1, DX2 DX4
. CK70 ksmen arj edilmi bir pil ile gelir. Pili arj etmek iin bir DX1, DX2 veya DX3 oklu yuvaya ve bir g kaynana ihtiyacnz olacak. DX4 CK70 DX1DX2 DX4 Multi-Dock CK70 DX1, DX2 CK70 DX1DX2 DX4 CK70 Mobile Computer 1001CP01, 1001CP01C, 1001CP01F8, 1001CP01F9, 1001CP01S, 1001CP01U, 1001CP01W Where to Find More Information Verweise zu weiteren Informationen Dnde encontrar ms informacin O trouver dautres dtails Tempat Mencari Informasi Lebih Lanjut www.intermec.com In the U.S.A and Canada, call 1.800.755.5505 Onde obter mais informaes Daha Fazla Bilgi Nerede Bulunabilir Caution: See Compliance Insert for use restrictions associated with this product. Vorsicht: Das Konformittsblatt fhrt etwaige Verwendungseinschrnkungen fr dieses Produkt an. Precaucin: Consulte el Inserto de cumplimiento para ver las restricciones de uso asociadas con este producto. Mise en garde: Consultez la Dclaration de conformit pour les restrictions dusage associes ce produit. Hati-hati: Bacalah Sisipan Kepatuhan tentang pembatasan pemakaian yang.
. Cuidado: Consulte as informaes sobre as restries de uso associadas a este produto no encarte sobre conformidade.
. Dikkat: Bu rnle ilgili kullanm kstlamalar iin Uyumluluk Ek Sayfasna bakn. , :
This product is protected by one or more patents. Dieses Produkt ist durch ein oder mehrere Patente geschutzt. Este producto esta protegido por una o varias patentes. Ce produit est protege par un brevet ou plus. Produk ini dilindungi oleh satu atau lebih paten. 1
. Este produto est protegido por uma ou mais patentes. Bu rn bir veya birden fazla patentle korunmaktadr. Electrical rating. Stromversorgung. Cali cacn elctrica. Cote lectrique. Peringkat kelistrikan. Especi caes elctricas. Voltaj bilgileri. : x 4,37 / 4,8 V; 2 / 1,5 A CK70 Mobile Computer Quick Start Guide
*930-236-004*
P/N 930-236-004 Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com 2012 Intermec Technologies Corporation. All rights reserved. Quick Start Guide Mobilcomputer-Kurzanleitung Gua de comienzo rpido para la computadora mvil Guide de dmarrage de lordinateur mobile Panduan Memulai Cepat Komputer Layap Manual de Consulta Rpida do Computador Mvel Hzl Balama Klavuzu CK70 10 9 8 12 11 1 7 5 6 2 4 3 SIM (WAN) microSD
1 2 3 4 5 | User Manual | Users Manual | 5.50 MiB |
70 Series Mobile Computer CK70, CK70NI, CK71, CK71NI, CN70, CN70NI, CN70e, CN70eNI User Manual Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. 2011 - 2012 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. ii 70 Series Mobile Computer User Manual Document Change Record This page records changes to this document. The document was originally released as Revision 001. Version Number Date 005 11/2012 004 003 2/2012 12/2011 002 06/2011 Description of Change Added information to support firmware version 1.50:
CloneNGo application New camera settings SceneEditor application EA30 imager extended reading range Revised information on ScanNGo bar codes. Added information on:
the flashlight feature. the Carrier Selection application. Revised information on:
upgrading the system software and the operating the Intermec Settings menus. system. GPS procedures. ScanNGo bar codes. Revised to add information on non-incendive (NI) versions of the computer, provisioning the computer, the new ScanDiagnostics application, and how to use the 70 Series as a USB mass storage device. Also corrected the cold boot procedure and removed the compass. 70 Series Mobile Computer User Manual iii iv 70 Series Mobile Computer User Manual Contents Contents Before You Begin. xi Safety Information . xi Global Services and Support . xi Warranty Information. xi Web Support . xi Send Feedback. xii Telephone Support . xii Who Should Read This Manual . xii Related Documents . xii Patent Information . xiii 1 About the Computer Features . 1 About the 70 Series Mobile Computers . 2 Whats New in This Release . 4 Overview of 70 Series Features . 5 About the Status LEDs . 6 70 Series Accessories . 8 About Language Provisioning . 10 About the Battery . 10 Charge the Battery . 11 Change the Battery. 11 About Battery Status . 13 About Battery Life and Conservation . 15 About the Keypad . 16 Enter Characters on the QWERTY Keypad . 23 Enter Characters on the Numeric Keypad . 23 Enter Characters on the CK70 and CK71 Keypads . 24 About the Power Button. 25 About the Intermec Dashboard Button . 26 Configure the Screen Backlight . 27 Configure the Screen Brightness . 27 Adjust the Volume . 27 About the Imager . 28 70 Series Mobile Computer User Manual v Contents Use the Imager as a Flashlight. 28 Read Bar Codes . 29 Insert a MicroSD Card. 30 Install a MicroSD Card in a CN70 or CN70e . 30 Install a MicroSD Card in a CK70 or CK71 . 33 Transfer Files To and From Your PC. 35 Use Microsoft ActiveSync to Transfer Files . 36 Use the Computer as a Mass Storage Device . 37 2 About the User Interface and Intermec Applications . 39 About the User Interface. 40 About the Home Screen . 40 Interact with the Screen . 41 Title Bar Status Icons . 42 Align the Screen . 45 About Intermec Applications. 45 Applications Available on the Mobile Computer . 45 Applications You Can Download to the Mobile Computer . 47 3 Use the Phone . 51 About the Phone . 52 Activate the UMTS Phone . 52 Activate the CDMA Phone . 54 Start the Activation Wizard . 56 Turn the Phone On and Off. 56 About Network Carriers . 56 Switch Network Carriers. 57 Add the WWAN Connection . 58 About the Network Connection . 59 vi 70 Series Mobile Computer User Manual Contents Make a Phone Call . 60 Make an Emergency Phone Call . 60 4Use the Camera . 61 About the Color Camera. 62 About the Camera Settings . 62 Configure the Camera . 65 Configure Camera Scenes. 65 Take a Picture . 66 Record a Video. 66 Save Pictures and Videos to a microSD Card. 67 5 Use GPS. 69 About the Integrated GPS on Your Computer . 70 Use the GPSID Installed on the Computer . 70 About the GPS Module Operating Modes . 71 Improve GPS Performance on the Computer . 72 6 Configure the Computer . 73 How to Configure the Computer . 74 Use Intermec Settings on the Computer. 74 Start Intermec Settings . 75 About the Structure of Intermec Settings . 75 Navigate in Intermec Settings . 80 Configure Profile Settings with Intermec Settings . 80 Restore Default Settings to a Menu. 81 Restore Default Settings for All Parameters . 81 Hide Menu Items in Intermec Settings . 81 Use Intermec Settings Remotely with SmartSystems . 82 70 Series Mobile Computer User Manual vii Contents About Network Communications . 82 Configure 802.11a/b/g/n (Wi-Fi) Radio Communications . 83 Configure Ethernet Communications . 83 Configure Bluetooth Communications . 84 About Serial and USB Communications . 88 Create an ISP Connection. 89 Create a VPN Server Connection . 91 About Wireless Security . 92 Choose Between Microsoft and Funk Security . 92 Load a Certificate . 102 7 Manage the Computer . 105 Manage the Computer in Your Network . 106 Manage the Computer Using CloneNGo . 106 Manage the Computer Using SmartSystems. 106 Manage the Computer Using Third-Party Software . 108 Develop and Install Applications . 108 Package Your Application . 108 Choose a Target Location. 108 Install Applications Using SmartSystems Foundation Console. 109 Install Applications Using Microsoft ActiveSync . 109 Install Applications Using a Storage Card . 110 Launch Applications Automatically . 110 Update the System Software . 110 Update Individual or Multiple Computers Using the SmartSystems Console .111 Update Individual Mobile Computers Using a microSD Card . 112 8 Troubleshoot and Maintain the Computer. 113 About the Intermec Dashboard . 114 Troubleshoot Your Mobile Computer . 115 Troubleshoot the Wi-Fi Connection . 115 Troubleshoot 802.1x Security . 116 Check 802.11 Network Status. 117 Troubleshoot Reading Bar Codes. 118 Use ScanDiagnostic to Troubleshoot the Scanner. 120 Troubleshoot Operating the Computer . 120 viii 70 Series Mobile Computer User Manual Contents Call Product Support. 122 Find Your Configuration Number. 122 Find Your Operating System Version . 123 Reset the Computer . 123 Reboot the Computer . 123 Cold Boot the Computer . 123 Clean Boot the Computer . 125 Clean the Computer. 125 ASpecifications and Default Settings . 127 Physical and Environmental Specifications . 128 CN70 Physical Dimensions . 128 CN70e Physical Dimensions . 128 CK70 Physical Dimensions . 128 CK71 Physical Dimensions . 128 Environmental Specifications . 128 Power and Electrical Specifications . 129 70 Series Non-Incendive Computer Specifications . 129 Operating System . 129 Hardware . 130 Back Accessory Interface Pin-outs . 130 Touch Screen Specifications . 130 Standard Communications . 131 Wireless LAN . 131 Regulatory Approvals . 131 Bar Code Symbologies. 132 Imager Reading Distances . 133 Default Configuration. 142 Data Collection Settings. 142 Communications . 145 Device Settings . 146 GPS Settings . 149 Core Messaging Service Settings. 149 Device Monitor Settings . 149 Virtual Wedge Settings . 150 70 Series Mobile Computer User Manual ix Contents BKeypads and Keystrokes . 151 Standard Characters . 152 CN70 Keypads and Keystrokes . 152 CN70e Keypads and Keystrokes . 157 CK70 Keypads and Keystrokes . 161 CK71 Keypads and Keystrokes . 168 C ScanNGo Wi-Fi Configuration Bar Codes. 177 Radio Configuration Bar Codes . 178 2D Configuration Bar Codes. 178 1D Configuration Bar Codes. 179 I Index . 185 x 70 Series Mobile Computer User Manual Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety cautions. This section explains how to identify and understand cautions and notes that are in this document. A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec website at www.intermec.com and click Support >
Returns and Repairs > Warranty. Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs. The code is provided as is with all faults. All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose. Web Support Visit the Intermec website at www.intermec.com to download our current manuals (in PDF). 70 Series Mobile Computer User Manual xi Before You Begin Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product. Send Feedback Your feedback is crucial to the continual improvement of our documentation. To provide feedback about this manual, please contact the Intermec Technical Communications department directly at TechnicalCommunications@intermec.com. Telephone Support In the U.S.A. and Canada, call 1-800-755-5505. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec website, click About Us > Contact Us. Who Should Read This Manual This manual is written for the person who is responsible for installing, configuring, and maintaining the 70 Series Mobile Computer. This manual provides you with information about the features of the 70 Series mobile computer, and how to install, configure, operate, maintain, and troubleshoot it. Before you work with the 70 Series mobile computer, you should be familiar with your network and general networking terms, such as IP address. Related Documents Intermec Settings Command Reference Manual Intermec Developer Library (IDL) Resource Kit Developers Guide This is a list of related Intermec documents. The Intermec website at www.intermec.com contains our documents
(as PDF files) that you can download for free. xii 70 Series Mobile Computer User Manual Before You Begin To download documents 1 Visit the Intermec website at www.intermec.com. 2 Click the Products tab. 3 Using the Products menu, navigate to your product page. For example, to find the CN70 computer product page, click Computers > Handheld Computers > CN70. 4 Click the Manuals tab. If your product does not have its own product page, click Support >
Manuals. Use the Product Category, the Product Family, and Product to find your documentation. Patent Information Product is covered by one or more of the following patents:
4882476; 4894523; 4953113; 4961043; 4970379; 4988852; 5019699;
5021642; 5038024; 5081343; 5095197; 5144119; 5144121; 5182441;
5187355; 5187356; 5195183; 5216233; 5216550; 5195183; 5195183;
5218191; 5227614; 5233172; 5241488; 5243602; 5258606; 5278487;
5288985; 5308966; 5322991; 5331136; 5331580; 5342210; 5349678;
5359185; 5371858; 5373478; 5389770; 5397885; 5410141; 5414251;
5416463; 5442167; 5464972; 5468947; 5468950; 5477044; 5486689;
5488575; 5500516; 5502297; 5504367; 5508599; 5514858; 5530619;
5534684; 5536924; 5539191; 5541419; 5548108; 5550362; 5550364;
5565669; 5567925; 5568645; 5572007; 5576529; 5592512; 5594230;
5598007; 5608578; 5616909; 5619027; 5627360; 5640001; 5657317;
5659431; 5671436; 5672860; 5684290; 5719678; 5729003; 5742041;
5761219; 5764798; 5777308; 5777309; 5777310; 5786583; 5793604;
5798509; 5798513; 5804805; 5805807; 5811776; 5811777; 5818027;
5821523; 5828052; 5831819; 5834753; 5834749; 5837987; 5841121;
5842070; 5844222; 5854478; 5862267; 5869840; 5873070; 5877486;
5878395; 5883492; 5883493; 5886338; 5889386; 5892971; 5895906;
5898162; 5902987; 5902988; 5912452; 5923022; 5936224; 5949056;
5969321; 5969326; 5969328; 5979768; 5986435; 5987192; 5987499;
5992750; 6003775; 6012640; 6016960; 6018597; 6024289; 6034379;
6036093; 6039252; 6064763; 6075340; 6095422; 6097839; 6102289;
6102295; 6109528; 6119941; 6128414; 6138915; 6149061; 6149063;
70 Series Mobile Computer User Manual xiii Before You Begin 6152370; 6155490; 6158661; 6164542; 6164545; 6173893; 6195053;
6234393; 6234395; 6244512; 6249008; 6328214; 6330975; 6345765;
6356949; 6367699; 6375075; 6375076; 6375344; 6431451; 6435411;
6484944; 6488209; 6497368; 6532152; 6538413; 6539422; 6621942;
6641046; 6681994; 6687403; 6688523; 6732930 There may be other U.S. and foreign patents pending. xiv 70 Series Mobile Computer User Manual 1 About the Computer Features This chapter introduces the 70 Series Mobile Computers with Windows Embedded Handheld operating system. Use this chapter to learn about the basic features and functions of each computer, as well as the available accessories for it. 1 Chapter 1 About the Computer Features About the 70 Series Mobile Computers The ergonomically designed Intermec 70 Series Mobile Computers are built on the Microsoft Windows Embedded Handheld operating system. They are lightweight, easy-to-use, and run most software developed for the Windows Embedded platform, including standalone, client-server, and browser-based applications. The 70 Series family of computers consists of four different models:
the CN70, CN70e, CK70 and CK71. The CN70 and CN70e have the same features except that the CN70e offers a larger keypad for data-input intensive applications. The CK70 and CK71 have most of the same features, but the CK71 offers a choice of imager options and does not offer a WWAN radio option (phone). For hazardous environments, Intermec offers non-incendive (NI) models of each 70 Series computer. Throughout this manual, all versions of the mobile computer are referred to as 70 Series unless information is specific to a particular model of computer. In most of the user manual, pictures of the CN70 and CK70 represent the four models of the 70 Series computers. CN70 Front View Cell phone speaker Good read LED Battery status LED On/off button Microphone Notication LED Scan button 2 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features CN70 Back View Imager Camera Speaker port Battery IrDa port CK70 and CK71 Front View Cell phone speaker Notication LED Good read LED Battery status LED On/off button Scan button Microphone 70 Series Mobile Computer User Manual 3 Chapter 1 About the Computer Features CK70 and CK71 Back View Imager Camera Imager Camera Left speaker port IrDA port Left speaker port IrDA port Battery Battery Whats New in This Release This version of the user manual supports firmware version 1.50 and includes information about these new features:
Intermec CloneNGo is a peer-to-peer device management application that ships on every computer and simplifies the process of configuring multiple computers. For more information, see Manage the Computer Using CloneNGo on page 106. Optimized camera settings make it easier to take good pictures. For more information, see About the Camera Settings on page 62 and Configure the Camera on page 65. The SceneEditor application lets you modify or create your own predefined camera scenes.Configure Camera Scenes on page 65. The EA30 imager provides an extended reading range. For more information, see EA30 Typical Reading Distances - Extended Reading Range on page 134. 4 70 Series Mobile Computer User Manual Overview of 70 Series Features Chapter 1 About the Computer Features The 70 Series includes these standard features:
EA30 area imager that can read bar codes and capture images Multi-processor architecture with 512 MB DRAM and 1G Flash CDMA, UMTS, or Flexible Network Radio capability (not available
(CK71 only) Choice of EA30, EX25, or EV12 imagers on CK71) 802.11a/b/g/n and Bluetooth radios GPS radio on CDMA, UMTS, or Flexible Network Radio computers (not available on CK71) 5-megapixel auto-focus color camera Customer-accessible microSD slot for memory cards up to 32 GB Customer-accessible SIM card slot IrDA port with speeds up to 4 Mbps The 70 Series Mobile Computer with an IEEE 802.11a/b/g/n radio installed is Wi-Fi certified for interoperability with other 802.11a/b/g/n wireless LAN devices. 70 Series Mobile Computer User Manual 5 Chapter 1 About the Computer Features About the Status LEDs Use the following illustrations and table to understand the status LEDs on your computer. All six status LEDS are not available on every 70 Series computer. For example, the QWERTY versions of the CN70 and CN70e do not have a Green key status LED. Location of the CN70 Status LEDs Good Read and Ready-to-Work Status LED Notication LED Battery status LED Orange key status LED Shift key status LED Green key status LED 6 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features Location of the CK70 and CK71 Status LEDs Good Read and Ready-to-Work status LED Notication LED Orange key status LED Battery status LED Green key status LED Shift key status LED
(CK70 alphanumeric and CK71 function numeric) Shift key status LED
(CK70 numeric and CK71 alphanumeric) Status LED Descriptions LED Notification Good Read Ready-to-Work Blue Color Amber Green Blinking blue Off Battery Description This LED is user-programmable. The computer successfully decoded a bar code. If you have Intermec Terminal Emulator (ITE), the application is running and connected to the host. If you do not have ITE, you can configure the Ready-to-Work indicator to turn on or off to indicate a healthy state. ITE is running but not connected to the host. The computer is unhealthy. ITE is not installed or not running. The computer is healthy. See About Battery Status on page 13. 70 Series Mobile Computer User Manual 7 Chapter 1 About the Computer Features LED Key Status Shift Color Green Orange Red Description The Green function key is enabled. The Orange function key is enabled. The Shift key is enabled. 70 Series Accessories The 70 Series computer ships with a battery. All other accessories are sold and ordered separately. For help, contact your local Intermec sales representative. 70 Series Accessories Accessory Audio Snap-On Adapter Back Accessory Interface CK70/CK71 Battery CK70/CK71 Magstripe Reader Adapter CN70/CN70e Battery CN70/CN70e Magstripe Reader Snap-On Adapter Desktop Stand DEX/UCS Snap-On Adapter DX1 Desktop Dock with USB connectivity Description Use the audio adapter to connect the computer to a headset. Use the back accessory interface to attach accessories such as the magstripe reader adapter to the CK70 and CK71. This battery provides main power to the CK70 and CK71. Use the magnetic stripe reader to be able to read magnetic cards with the CK70 and CK71 computer. This battery provides main power to the CN70 and CN70e. Use the magnetic stripe reader to be able to read magnetic cards with the CN70 and CN70e computer. Use the desktop stand to hold the 70 Series computer on your desk or a stable surface. Use this adapter to receive and send serial communications through a DEX/UCS connection. Use the desktop dock with the:
Computer cup to charge the battery while it is installed in the computer. Battery cup to charge the battery. 8 70 Series Mobile Computer User Manual Accessory DX2 Dual Dock and DX4 Quad Dock. The DX2 and DX4 are available in charge-only and Ethernet configurations. Ethernet Snap-On Adapter Handstrap Replacement Kit Holster RS-232 Snap-On Adapter Scan Handle Chapter 1 About the Computer Features Description Use these charger bases with the:
Computer cup to charge batteries while they are installed in the computer. Battery cup to charge two batteries. Use the Ethernet adapter to be able to connect the computer to an Ethernet network. You can order and install a replacement handstrap for the CN70, CN70e, and CK70/CK71. Each kit contains 5 handstraps. Use the holster to store the computer when you need your hands free. Use the RS-232 adapter to convert the connector on the bottom of the computer to a serial connector. Use the scan handle to provide better ergonomics to the computer for high-volume scanning applications. Tethered Stylus Replacement Kit You can order and install a replacement USB Snap-On Adapter Vehicle Dock Vehicle Holder Vehicle Power Adapter Vocollect Snap-On Adapter stylus. Use this adapter to convert the bottom connector of the computer to a USB connector. Use the vehicle dock to provide power and hold your computer while you are using it in a vehicle. Use the vehicle holder to hold your computer while you are using it in a vehicle. Use the vehicle power adapter to provide power to the computer from your vehicle. Use this adapter to be able to use the Vocollect voice solution in your warehouse. 70 Series Mobile Computer User Manual 9 Chapter 1 About the Computer Features About Language Provisioning If your 70 Series computer includes language provisioning, you are prompted to select a language provision when the computer starts for the first time. It may take up to 15 minutes to load your language. These languages are available:
Chinese Simplified (CHS) Chinese Traditional (CHT) Spanish (ESN) French (FRA) German (GER) Italian (ITA) Japanese (JPN) Korean (KOR) Russian (RUS) World Wide English (WWE) Make sure you select the correct language before you tap Provision. If you want to change the language provisioning, you need to send your computer to an Intermec Global Repair Center. About the Battery The battery used in this device may present a fire or chemical burn hazard if it is mistreated. Do not disassemble it, heat it above 100 C (212 F) or incinerate it. Dispose of used batteries promptly. Keep away from children. The computers use these rechargeable Lithium-ion battery pack as the main power source:
3.7 V, 4000 mAH (14.8 Wh) battery for the CN70 and CN70e 3.7 V, 5200 mAH (19.2 Wh) battery for the CK70 and CK71 10 70 Series Mobile Computer User Manual Charge the Battery Chapter 1 About the Computer Features You need to fully charge the battery before using your computer for the first time. Use one of the charging accessories listed in the next table to charge the battery. 70 Series Charging Accessories Charging Time Charging Accessory Up to 6 hours Snap-on adapters DX1, DX2, or DX4 dock Up to 6 hours CN70, CN70e, CK70, and CK71 Vehicle Power Adapter Up to 6 hours Change the Battery If your battery power is low, you need to either charge the battery in the computer, or replace it with a charged battery. 1 Save your files and close any open applications. 2 Press the Power button and choose Hibernate from the menu to suspend the computer. 3 Detach the handstrap from the computer. Detach the Handstrap From a CN70 or CN70e 70 Series Mobile Computer User Manual 11 Chapter 1 About the Computer Features Detach the Handstrap From a CK70 or CK71 4 Make sure the computer is in hibernate mode and the screen is off. 5 Remove the battery. On the CN70 or CN70e, push the battery release toward the bottom of the computer until the battery releases and then lift it away from the computer. 12 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features On the CK70 or CK71, push the battery release toward the top of the computer until the battery releases and then lift it away from the computer. 6 Insert the top end of a fully charged battery into the computer, and press down firmly on the bottom of the battery. Make sure that the battery release is fully engaged. About Battery Status Use the battery icon on the Title bar to see the power status of your battery. If you want more detailed information on your battery such as usage time or voltage, use the Intermec Dashboard. For more information on the Dashboard, see About the Intermec Dashboard on page 114. Battery Icon Status Descriptions Battery Icon Status Battery is fully charged. Battery has a high charge. Battery has a medium charge. You should be able to work for several more hours before changing batteries. Battery is low. You need to charge or replace the battery soon. 70 Series Mobile Computer User Manual 13 Chapter 1 About the Computer Features Battery Icon Status Battery is critically low. You need to replace the battery now. Battery is charging. The battery is not installed. You can also use the battery status LED to see the charging status of your battery. Battery status LED Battery Status LED Descriptions LED State Steady green Blinking red Steady red Blinking red-amber Steady amber Off Description The computer is connected to a charger and the battery is more than 95% charged. The battery is very low. The computer will soon go into Suspend mode. Charge or replace the battery. The computer is connected to a charger and the battery is charging. The battery charging system has encountered an error. The battery is not charging. The battery is outside of the allowable charging temperature range. Charging will resume when the battery temperature is back in the acceptable range of 5 C to 35 C (41 F to 95 F). The computer is not on external power and the battery is operating normally. 14 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features About Battery Life and Conservation Batteries that are stored outside the computer for long periods of time slowly discharge. Intermec recommends storing the battery in a charger to maintain battery performance. Battery Conservation Tips When You Want To:
Use the computer and the Low Battery status icon appears or the Battery light comes on. Stop using the computer for 5 minutes or longer. Store the computer for more than a day. Store the battery outside the computer. Do This to Save Battery Power:
Connect the computer to an external power source. Or, save your data and press the Power button and select Hibernate. After the computer turns off, remove the battery and insert a fully charged battery. Make sure that the low battery icon is not on the screen and the Battery LED is not on. Press the Power button and choose Suspend to suspend the computer. If you are storing the computer for a few days, like over the weekend, install a charged battery or connect the computer to a power source. If you are storing the computer for longer, remove and charge the battery, and then store both the battery and computer in a cool location. If you store the battery for several months, recharge the battery to keep it at peak performance. Store the batteries in a charger. 70 Series Mobile Computer User Manual 15 Chapter 1 About the Computer Features About the Keypad The CN70 comes with either a QWERTY keypad or a numeric keypad. The CN70e comes with either a QWERTY numeric keypad, a phone-style numeric keypad (1-2-3 digits across the top), or a calculator-style numeric keypad (7-8-9 digits across the top). The computer has an ambient light sensor that detects low light and turns on the keypad backlight. By default, the keypad backlight is enabled in low light conditions. You can disable the keypad backlight to conserve power. Use Intermec Settings to configure the backlight. For help, see Use Intermec Settings on the Computer on page 74. CN70 QWERTY Keypad
Q W
FDSA
1 2 3 RE T Y U I O P G H J K L 4 7 5 8 6 9 CXZ V B N M Esc sym 0 Space Enter 16 70 Series Mobile Computer User Manual CN70 Numeric Keypad Chapter 1 About the Computer Features 1 4 7 Caps GHI PQRS Esc ABC JKL TUV Space 2 5 8 0 DEF MNO WXYZ 3 6 9 Enter CN70e QWERTY Numeric Keypad 70 Series Mobile Computer User Manual 17 Chapter 1 About the Computer Features CN70e Calculator-Style Numeric Keypad CN70e Numeric Keypad 18 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features The CK70 comes with either a large alpha or an alphanumeric keypad. The CK71 comes with either a numeric function keypad or an alphanumeric keypad. The computer has an ambient light sensor that detects low light and turns on the keypad backlight. By default, the keypad backlight is enabled in low light conditions. You can disable the keypad backlight to conserve power. Use Intermec Settings to configure the backlight. For help, see Use Intermec Settings on the Computer on page 74. CK70 Large Alpha Keypad Esc Send A B End C Enter 1 4 7 F1 D F4 G F7 K
O 2 5 8 0
S
F2 E F5 H F8 L F10 P T W X F3 sym Space 3 6 9 F F6 I F9 M Q J N R
U V Insert Delete
Z Y Ctrl 70 Series Mobile Computer User Manual 19 Chapter 1 About the Computer Features CK70 Alphanumeric Keypad Send Insert 1 4 7 Esc End Delete 3 6 9 Enter 2 5 8 0 Alt F6 F1 F7 F2 F8 F3 F9 F4 F10 F5 F11 A F12 B F18 H F24 M N G F17 F23 S T Ctrl Space F13 C F19 I O U F14 D F20 J P F15 E F21 K Q F16 F F22 L R V W X Y Z 20 70 Series Mobile Computer User Manual CK71 Numeric Function Keypad Chapter 1 About the Computer Features View Insert SysRq Fld-
Fld+
Fld Exit View Page Return Enter Clear PA3 PrvScr B Roll C NxtScr A D G L F Roll 8 9 5 6 3 PA2 I Attn K E H PA1 Delete 7 4 1 2 0 F2 Home F13 M J F1 F14 Reset Esc Space Return Enter N F15 O F16 F3 F4 P F17 Q F18 R F19 S F20 F5 F6 F7 F8 T F21 U F22 V F23 W F24 F9 F10 F11 F12 X Y Z Ctrl Alt 70 Series Mobile Computer User Manual 21 Chapter 1 About the Computer Features CK71 Alphanumeric Keypad Fld Exit View Page Alt Reset Esc PrvScr Insert Fld-
7 4 1 F6 F7 F8 F9 PA1 F1 PA2 F2 PA3 F3 Autolog F4 F10 EEOF F11 F17 F23 F5 Attn A FldMk G Menu F12 B F18 Home H F24 NewLn M N Fld+
Roll Roll 8 5 2 0 Ctrl Space Delete Clear NxtScr Help 9 6 3 Return Enter F13 C F19 Hex I Mode O F14 Dup D F20 J Print P F21 F15 Erase E Keypd K SysRq Q F16 Find F F22 L Remove R S T U V W X
Y Select Z 22 70 Series Mobile Computer User Manual Enter Characters on the QWERTY Keypad Chapter 1 About the Computer Features You need to use the orange modifier key b and the Shift key y to access all characters and functions on the QWERTY keypad. To type a character:
Press the key for that character. To type a character or access a function on the overlay:
Press b and then press the key for the character or function. To only type characters or access functions on the overlay:
Press b twice to lock the orange modifier key to stay on, and then press the keys for the characters or functions. To type a single uppercase letter:
Press y and then the letter key. To type all uppercase letters:
Press y y to turn on Caps Lock, and then press the letter keys. You can still type orange modifier characters by pressing b and then the key for that character. To turn off Caps Lock, press y. Enter Characters on the Numeric Keypad You need to use the orange modifier key b and the green modifier key c to access all characters and functions on the Numeric keypad. To type a character or access a function printed in orange on the overlay:
Press b and then press the key for the character or function. To type a character or access a function printed in green on the overlay:
Press c and then press the key for the character or function. To type letters in the upper right corner of a key:
Press c and then press the key one to three times depending on the position of the letter. 70 Series Mobile Computer User Manual 23 Chapter 1 About the Computer Features For example, in the upper right corner of the 2 key there are the letters ABC:
To type c, press c 2 2 2. To type C, press c 1 and then press c 2 2 2. Note: On the calculator-style keypad, the 2 is replaced by the 8. To only type letters:
Press c c to lock the green modifier key, and then press the key one to four times depending on the position of the letter. While the green modifier key is locked, press 1 to toggle between only uppercase and lowercase letters. To unlock the green modifier key, press c. Note: If uppercase letters are enabled and you unlock the green modifier key, you may need to press c 1 to type lowercase letters. Enter Characters on the CK70 and CK71 Keypads You need to use the orange modifier key b, the green modifier key c, and the Shift or Caps Lock key y to access all characters and functions on the Alpha, Alphanumeric, and Numeric Function keypads. To type a character or access a function printed in orange on the overlay or in the upper left corner of a key:
Press b and then press the key for the character or function. To type a character or access a function printed in green on the overlay:
Press c and then press the key for the character or function. To type a single uppercase letter:
Press y and then the letter key. To type all uppercase letters:
Press y y to turn on Caps Lock, and then press the letter keys. You can still type orange or green modifier characters by pressing b or c and then the key for that character. To turn off Caps Lock, press y. 24 70 Series Mobile Computer User Manual About the Power Button Chapter 1 About the Computer Features When you press the Power button, a dialog box with a list of power options appears. If you do not select a power options setting, the currently selected action (the button outlined in bold) occurs after the timeout. The Intermec Power Options Default Screen Note: The Real Time Clock (RTC) persists through all of the power options as long as it receives power from the Real Time Clock battery. Intermec Power Options Option Hibernate
(battery swap) Description High power saving mode. Use this setting only for swapping the battery. The computer saves the current system state, registry, and file system and then powers off all radios and internal devices. You can wake the computer by pressing the Power button or connecting the computer to external power. 70 Series Mobile Computer User Manual 25 Chapter 1 About the Computer Features Option Suspend Reboot Cancel Screen Off Shutdown Description Medium power saving mode. The computer powers off all radios and internal devices not involved in saving the system state, but the phone stays on to receive calls. This option is the default setting. You can wake the computer by pressing the Power button, pulling the scanner trigger, receiving a call, scheduling an event such as an alarm, or by connecting external power. The computer does not save the current system state, but the registry and file systems are saved. The computer shuts down all running processes and restarts. The Power Options menu is cancelled. Lowest power saving mode. The screen turns off, but the phone, all radios, and internal devices stay on. Tap the screen to turn the screen back on. Very high power saving mode. The computer turns off everything. You must press Power or apply external power to restart the computer. The Intermec Power Options screen is customizable. You can use Intermec Settings to determine which options are available to end users, the timeout until the default choice is selected, the default action if no option is selected, or to disable the Power Options screen. For more information on customizing the screen using Intermec Settings, see Use Intermec Settings on the Computer on page 74 or see the Intermec Settings Command Reference Manual. About the Intermec Dashboard Button If the Ready-to-Work light blinks, your computer may be experiencing a problem. Press the Intermec Dashboard button (m) to launch the Intermec Dashboard application and view troubleshooting and status information. You can press the m button at any time to bring up the Intermec Dashboard. If the computer is not healthy, the current issues are displayed at the top of the screen. If the device is healthy, you can use the Dashboard to view device information. For more information, see About the Intermec Dashboard on page 114. 26 70 Series Mobile Computer User Manual Configure the Screen Backlight Chapter 1 About the Computer Features The display has an ambient light sensor that automatically adjusts the backlight intensity to conserve power and ensure the display is readable. By default, the screen turns off when there is no activity with the computer. Press a key or tap the screen to resume activity. You can configure the screen backlight to turn off. 1 Tap Start > Settings > Power. 2 Tap Advanced on the horizontal scroll bar. 3 Select the screen power off settings for when the computer is on battery power or external power. Configure the Screen Brightness You can configure the screen brightness using Intermec Settings or from the Start menu. 1 Tap Start > Settings > System > Backlight. 2 Adjust the slider to the desired brightness level. 3 Tap OK. Adjust the Volume You can adjust the computer volume for your needs and your environment. The volume includes sounds you hear when you tap the screen or read bar codes with the imager. You can set the volume to off, very low, low, medium, high, very high (default), or vibrate. You can also use the buttons on the right side of the computer to adjust the volume:
The upper button increases the volume. The lower button decreases the volume. 70 Series Mobile Computer User Manual 27 Chapter 1 About the Computer Features You can adjust the volume settings using Intermec Settings or the horizontal scroll menu. 1 Tap the Volume icon at the top of the screen, and then tap the volume icon on the horizontal scroll menu. 2 Use your stylus or the u and d keys to adjust the volume slider to the volume you want, select Vibrate, or select Off. About the Imager The computer ships with an internal imager. You can use the imager as a flashlight or to read bar codes. Note: When the Pictures & Videos application is running, you cannot use the imager. Use the Imager as a Flashlight You can use the EA30 imager as a flashlight. By default, the imager is set to read bar codes. To use the imager as a flashlight, you must remap the Left side lower button. 1 Open Intermec Settings on the mobile computer by tapping Start > Settings > System > Intermec Settings. 2 From the Intermec Settings main menu, tap Device Settings >
Keypad. 3 From the Keypad menu, tap Button Remapping. 4 From the Left side lower button menu, select Flashlight. 5 From the Flashlight timeout drop-down menu, select how long to leave the flashlight on before it automatically turns off. 6 Tap OK. 28 70 Series Mobile Computer User Manual Read Bar Codes Chapter 1 About the Computer Features Depending on the imager model in your computer, you can read 1D and 2D bar code symbologies, composite symbologies, and postal codes. You can also connect the computer to cordless scanners (like the SF51 and SR61) through Bluetooth communications or tethered scanners
(like the SR30 and SR61T) through the RS-232 adapter. For help, see Connect to a Bluetooth Scanner on page 85 and Connect to a Tethered Scanner on page 89, respectively. 1 Enable only the bar code symbologies that you need. 2 Use Intermec Settings to select the predefined imager mode that best suits your environment:
Predefined Mode 1D 1D and 2D Standard 1D and 2D Bright Environment 1D and 2D Reflective Surface For Scanning Only 1D labels.
(Default) All types of bar code labels. In high ambient light, such as outdoors in the sunshine. Glossy labels. Note: You can also select the imager predefined mode in Profile Settings by tapping Start > Profile Settings > Scanning. 3 Point the imager window at the bar code label, and hold the computer steady a few inches from the label. 4 Press the Scan button. The laser pointer and illumination beam or frame appear. 70 Series Mobile Computer User Manual 29 Chapter 1 About the Computer Features Scanning With the EA30 Imager 5 Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the illumination beam or frame covers the bar code you are trying to decode. When the computer successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 6 Release the Scan button. Insert a MicroSD Card You can use a microSD card to increase file storage and install software. The computers support an optional 32 GB maximum capacity microSD card. Note: The computer resets when you open the card access door to insert the microSD card. Make sure you completely close the card access door before you use your computer. Install a MicroSD Card in a CN70 or CN70e You need a Phillips screwdriver to install the microSD card. 1 Press the Power button to turn off the computer. 2 Remove the handstrap and the battery. 30 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features 3 Remove the two Phillips screws and open the card access door. 4 Slide the SIM card door to the left to unlock it and open the door. 70 Series Mobile Computer User Manual 31 Chapter 1 About the Computer Features 5 Slide the microSD card door towards the top of the computer to unlock it and open the door. 6 Slide the microSD card into place. 7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Close the card access door and replace the two screws. 10 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 32 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features 11 Attach the handstrap. 12 Press the Power button. The computer cold boots. Install a MicroSD Card in a CK70 or CK71 You need a Phillips screwdriver to install the microSD card. 1 Press the Power button to turn off the computer. 2 Remove the handstrap. 3 Remove the two screws that attach the interface adapter cover to the back of the computer. 70 Series Mobile Computer User Manual 33 Chapter 1 About the Computer Features 4 Slide the SIM card door to the left to unlock it and open the door. 5 Slide the microSD card door towards the top of the computer to unlock it and open the door. 34 70 Series Mobile Computer User Manual Chapter 1 About the Computer Features 6 Slide the microSD card into place. 7 Close the microSD card door and slide it towards the bottom of the computer to lock it in place. 8 Close the SIM card door and slide it to the right to lock it in place. 9 Replace the interface adapter cover and attach with the two screws removed in Step 2. 10 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 11 Reattach the handstrap. 12 Press the Power button. The computer cold boots. Transfer Files To and From Your PC The 70 Series computer supports these two methods for transferring files to and from your PC:
Using Microsoft ActiveSync or Windows Mobile Device Center. Using the 70 Series computer as a mass storage device. 70 Series Mobile Computer User Manual 35 Chapter 1 About the Computer Features Use Microsoft ActiveSync to Transfer Files You can use Microsoft ActiveSync (Windows XP or earlier) or Windows Mobile Device Center (Windows Vista or Windows 7) to establish a connection between your computer and a PC. After you connect to your PC, you can transfer files, synchronize files, remotely debug, and perform other device management activities. ActiveSync and Windows Mobile Device Center are free applications available from the Microsoft website at www.windowsmobile.com/getstarted. To establish a partnership between your computer and a PC, you need to physically connect your computer to your PC using these accessories:
USB snap-on adapter (Model 1000AA07) USB cable Using these accessories, you can transfer files to and from your PC using ActiveSync. 1 Connect your mobile computer to your desktop PC using the adapter and USB cable. 2 Download ActiveSync from the Microsoft website and install ActiveSync on your PC. 3 Follow the onscreen instructions to establish a partnership. When the partnership is established, the Microsoft ActiveSync screen appears on your PC. 36 70 Series Mobile Computer User Manual Use the Computer as a Mass Storage Device Chapter 1 About the Computer Features You can connect the 70 Series computer as a mass storage device to your desktop PC. When connected as a mass storage device, you can easily copy files to and from the mobile computer. 1 Go to www.datalight.com and download the Reliance Nitro Windows Driver (RNWD). You need to login before you can download the driver. 2 Connect the mobile computer to your desktop PC using a USB cable. 3 On the mobile computer, tap Start > Settings > System > Intermec Settings. 4 From the Intermec Settings Main Menu, tap Device Settings >
USB. 5 From the USB function driver menu, select Mass storage - Flash File Store and tap OK. 6 Copy files to and from your desktop PC to the mobile computer. 70 Series Mobile Computer User Manual 37 Chapter 1 About the Computer Features 38 70 Series Mobile Computer User Manual 2 About the User Interface and Intermec Applications Use this chapter to learn about the Windows Embedded Handheld user interface and how to interact with the screen. You can also use this chapter to learn about the Intermec applications on your computer, as well as additional Intermec applications you can download. 39 Chapter 2 About the User Interface and Intermec Applications About the User Interface The user interface for the Windows Embedded Handheld 6.5 operating system is different from previous versions of Windows Mobile. The interface is touch-friendly and easy to navigate. Use the following sections to understand how to interact with Windows Embedded Handheld 6.5. About the Home Screen When you turn on your mobile computer, the Home screen is the first screen that appears. The Home screen contains three navigation bars:
the Title bar, the horizontal scroll bar, and the Tile bar. The Windows Embedded Handheld 6.5 Home Screen Title bar Horizontal scroll bar Tile bar Use the Title bar icons to view the current status of information such as signal strength and battery power remaining. For more information on the Title bar icons, see Title Bar Status Icons on page 42. A horizontal scroll bar appears when you tap an icon in the Title bar. This horizontal scroll bar makes it easy to access the applications associated with the Tile bar icons. The horizontal scroll bar also contains a magnifier which improves the touch experience by making parts of the screen large enough to tap with your finger. 40 70 Series Mobile Computer User Manual Chapter 2 About the User Interface and Intermec Applications The horizontal scroll bar also replaces tabs within Windows screens and allows for easier navigation. Clock & Alarms Screen With Horizontal Scroll Bar Use the Tile bar to navigate between screens and within applications. The icons available on the Tile bar change depending on the application you are using. Interact with the Screen The Windows Embedded Handheld 6.5 interface supports the use of gestures with the finger or stylus to move around the screen. The table below explains the supported gestures. Description Represents the left click of a mouse. Gesture Tap Double-tap Represents the left double-click of a mouse. Hold Represents the right click of a mouse when you press and hold on the screen and a context menu appears. Initiates scrolling in the direction (horizontal or vertical) the finger or stylus moves across the screen. Press and hold on the screen and then drag in any direction. Flick Pan 70 Series Mobile Computer User Manual 41 Chapter 2 About the User Interface and Intermec Applications Title Bar Status Icons Tappable icons in the Title bar immediately show you the status of your network, your phone, the volume, the battery, and the time. Use the following table to understand what the icons mean. Title Bar Status Icon Descriptions Icon Description You have a new notification. You have a new text message. You have a new email message. You have a new instant message. You missed a call. The speakerphone is on. The phone is roaming. An alarm is set. The microphone is on. An internet call is in progress. A Bluetooth headset is detected. An ActiveSync connection has been established. There is a problem with the ActiveSync synchronization. An ActiveSync synchronization is in progress over USB. A CDMA connection is active. A CDMA connection is available, but not transferring data. 42 70 Series Mobile Computer User Manual Chapter 2 About the User Interface and Intermec Applications Icon Description A UMTS network is available. Connecting to a UMTS network. A UMTS connection is active. A 3G+ network is available. An EDGE network is available. Connecting to an EDGE network. An EDGE connection is active. A GPRS network is available. Connecting to a GPRS network. A GPRS connection is active. An HSDPA network is available. Connecting to an HSDPA network. An HSDPA connection is active. Bluetooth is on. Wi-Fi is on but not connected, and no networks are detected. Wi-Fi is not connected to a network, and other networks are detected. Other wireless networks are detected. Connected to a wireless network. Synchronizing through a Wi-Fi connection. 70 Series Mobile Computer User Manual 43 Chapter 2 About the User Interface and Intermec Applications Icon Description Connected to a wireless network, and other networks are detected. Information about a new wireless network is available. A network connection is active. A network connection is inactive. The phone has maximum signal strength. The phone has no signal. The phone capability is off. The phone has no service. The phone is searching for service. Data is being transferred. A voice call is in progress. A voice call is on hold. There is no SIM card present in the computer. The volume is off and the phone is set to vibrate. The volume is on. The volume is off. The battery has a full charge. The battery has a high charge. The battery has a medium charge. 44 70 Series Mobile Computer User Manual Chapter 2 About the User Interface and Intermec Applications Icon Description The battery has a low charge. The battery has a very low charge. The battery is attached to external power and is charging. No battery is installed in the computer. Call forwarding is on. Voice mail is off. GPS locator is off. GPS locator is on. Align the Screen You may need to align your screen if you tap on one area and it registers in a different part of the screen. Make sure you only use the stylus to complete the alignment process. 1 Tap Start (t) > Settings > System > Screen. 2 Follow the prompts on the screen to complete the alignment process. About Intermec Applications Intermec provides many useful applications to help you configure, troubleshoot, and connect your computer to other devices and networks. You can also download additional applications from the Intermec website to help you use all of the features of your computer. Applications Available on the Mobile Computer Use this table to understand some of the Intermec applications available on your computer. 70 Series Mobile Computer User Manual 45 Chapter 2 About the User Interface and Intermec Applications Intermec Applications Available on the Mobile Computer Icon Application Bluetooth Audio Carrier Selection CloneNGo iGPS Intermec Settings ISpyWiFi Description Use the Bluetooth Audio application to connect to a Bluetooth headset or hands-free device. For more information, see Connect to a Bluetooth Audio Device on page 88. Use the Carrier Selection application to quickly change your network carrier. For more information, see About Network Carriers on page 56. Use CloneNGo to configure basic device settings on multiple client computers from one master computer. For more information, see Manage the Computer Using CloneNGo on page 106. Use the iGPS application to improve the performance of GPS on your computer. For more information, see Improve GPS Performance on the Computer on page 72. iGPS is only available on computers with phone capability. Use Intermec Settings to configure your computer. You can use Intermec Settings to individually configure a computer or you can use it through SmartSystems to configure all of your computers. For more information, see Use Intermec Settings on the Computer on page 74. Use ISpyWiFi to check your 802.11 status and diagnose issues with the connection. For more information, see Check 802.11 Network Status on page 117. Profile Settings Use Profile Settings to easily configure the computer for a specific use. You can choose predefined values for the Camera, Power, and Scanning. Tap the Profile Setting you want to use. You will see a message that changes are saved and a check mark appears next to your choice. For more information on modifying Profile Settings options, see Configure Profile Settings with Intermec Settings on page 80. 46 70 Series Mobile Computer User Manual Chapter 2 About the User Interface and Intermec Applications Icon Application Description ScanDiagnostic Use the ScanDiagnostic application to troubleshoot problems with the internal or external scanner. For more information, see Use ScanDiagnostic to Troubleshoot the Scanner on page 120. Use the SceneEditor application to modify predefined camera scenes or create new scenes. For more information, see Configure Camera Scenes on page 65. Bluetooth, phone) on and off and configure settings for each radio. Use the Wireless Printing application to connect to a Bluetooth printer. For more information, see Connect to a Bluetooth Printer on page 87. Use the Wireless Scanning application to connect to a Bluetooth scanner. For more information, see Connect to a Bluetooth Scanner on page 85. SceneEditor Wireless Printing Wireless Scanning Wireless Center Use the Wireless Center to turn radios (Wi-Fi, Applications You Can Download to the Mobile Computer You can download several Intermec applications from the website that extend the capabilities of your 70 Series computer. All of the applications listed below are available from the Intermec website. Some of the applications require the purchase of a license to run. To find the application you want, go to www.intermec.com > Support >
Downloads and then enter the information to find your 70 Series computer. About eMDI Intermec Enhanced Mobile Document Imaging Application (eMDI) is a professional document capture application that enables you to capture images of full page documents (8.5 x 11 or A4 paper sizes) with the camera. You can transfer the images from your mobile computer to a PC or server. For more information, see the Intermec Enhanced Mobile Document Imaging User Guide. You can download and use eMDI for a 30-day evaluation period. After the evaluation period expires, you will need to purchase a license. 70 Series Mobile Computer User Manual 47 Chapter 2 About the User Interface and Intermec Applications About Features Demo Intermec Features Demo provides a simple way to explore the key features of your mobile computer. You will find applications that demonstrate scanning, document imaging, image capture, printing, and GPS functionality. Many of the applications that are part of Features Demo also have separate full-featured versions that you can download and license for your computer. About Image Capture The Intermec Image Capture application is provided for use on the 70 Series computers with an EA30 imager. Image capture provides a way for users to capture a high quality grayscale image with a mobile computer. Image Capture also allows you to change settings to provide the best image possible for the conditions present. You do not need to license Image Capture. About Intermec Browser Intermec Browser is a locked-down web application for your computer that is compatible with Internet Explorer 6.0. You can configure Intermec Browser for your specific application requirements and design your own web pages. You can download and use Intermec Browser for a 60-day evaluation period. After the evaluation period expires, you will need to purchase a license. About Intermec Connection Manager Intermec Connection Manager is a software application and API interface that provides seamless network roaming for Intermec mobile computers configured with one or more wired or wireless technologies
(Ethernet, 802.11, GPRS, CDMA). Intermec Connection Manager works in the background to automatically establish and maintain connections. You can download and use Intermec Connection Manager for a 60-day evaluation period. the evaluation period expires, you will need to purchase a license. 48 70 Series Mobile Computer User Manual Chapter 2 About the User Interface and Intermec Applications About Intermec Launcher Intermec Launcher is a Microsoft Windows application, designed for Intermec mobile computers, that provides a platform from which other applications may be launched while attempting to provide a locked-down environment. You can configure Intermec Launcher for your specific application requirements. You can download and use Intermec Launcher for a 60-day evaluation period. After the evaluation period expires, you will need to purchase a license. About Intermec Terminal Emulator (ITE) Intermec Terminal Emulator (ITE), part of Intermec Client Pack (ICP), is the next generation of Intermecs popular terminal emulation client designed for enterprise-level data collection. It provides a consistent user interface and a common menu structure to simplify the use and management of applications running on Intermec mobile and wireless computers. ITE is packed with enhancements that improve productivity, reduce errors, and deliver fast return on investment. It supports multiple emulation protocols in a single client and has new features such as session persistence, remote management and configuration, and offers a maintenance plan to keep you up-to-date with the latest releases and upgrades. You can download and use ITE for a 60-day evaluation period. After the evaluation period expires, you will need to purchase a license and maintenance plan. About SmartSystems SmartSystems is an easy-to-use software platform that provides IT Administrators and Integrators a single, integrated portal for hands-free provisioning, deployment, and management of Intermec devices minimizing the effort spent on software upgrades, equipment monitoring, maintenance and troubleshooting. SmartSystems provides a consistent way to manage Intermec devices including mobile computers, RFID readers, printers and bar code scanners, located on-site or remote, to make the most of limited IT resources, and lower the total cost of ownership for Intermec data collection equipment. SmartSystems can be downloaded at no charge from the Intermec website. For more information, visit www.intermec.com/SmartSystems. 70 Series Mobile Computer User Manual 49 Chapter 2 About the User Interface and Intermec Applications 50 70 Series Mobile Computer User Manual 3 Use the Phone You can use the phone feature to make and receive telephone calls, as well as transmit data through cellular wide-area networks (WANs). 51 Chapter 3 Use the Phone About the Phone The 70 Series mobile computer supports two types of cellular technology:
CDMA UMTS Note: Your Flexible Network Radio mobile computer supports both CDMA and UMTS technology. Your Flexible Network Radio does not support Network Information and Time Zone (NITZ) messages to automatically set the system time. Phone features on the computer include a speaker and a microphone. You can also use a Bluetooth headset or hands-free kit. The phone feature is enabled by default on WWAN-equipped mobile computers. After you turn on the phone and activate service with your wireless carrier, you can customize the phone features and network settings. For more information, see the online help on your mobile computer. Activate the UMTS Phone You use a SIM card to activate the UMTS phone on your computer. You can purchase the SIM card from your network provider. 1 Press the Power button to turn off the computer. 52 70 Series Mobile Computer User Manual Chapter 3 Use the Phone 2 On the CN70 or CN70e:
a Push the battery release tab forward until the battery releases, and lift the battery away from the computer. b Remove the two Phillips screws and open the card access door. 3 On the CK70, remove the two screws and lift the card access door away from the computer. 4 Slide the SIM card door to the left to unlock it and open the door. 70 Series Mobile Computer User Manual 53 Chapter 3 Use the Phone 5 Slide the SIM card into the slot in the card access door. 6 Close the SIM card door and slide it to the right to lock it in place. 7 Close the card access door and replace the two screws. 8 Install the battery. Press down firmly on the bottom of the battery, and make sure that the battery release tab is fully engaged. 9 Press the Power button. The computer cold boots. Activate the CDMA Phone To activate the CDMA radio module in your mobile computer, you need to contact your wireless carrier and set up an account for each mobile computer. The following table lists the carriers that Intermec currently supports. If your carrier is not listed in the table, please contact Intermec product support to see if it is now supported. Currently Supported Carriers Country United States Carriers Sprint, Verizon 54 70 Series Mobile Computer User Manual Chapter 3 Use the Phone The carrier requires the Mobile Equipment Identifier (MEID) to start the activation process. You can find the MEID:
on a label located in the upper right corner of the battery compartment. on the outside of the computer shipping box. in the Version Information menu. Tap Start > Settings >
Personal > Phone > Version Information tab. The activation process is slightly different for each CDMA carrier. Your carrier sales contact and an Intermec representative can guide you through the process. After you supply the MEID to your carrier, they will respond with values that you must enter using the Windows Mobile Activation Wizard (if required). Some of the supported carriers do not require you to enter any values. The following table shows the carriers, the correct activation method to use, and the values that you need to activate your phone. Values Required for CDMA Phone Activation Method Activation Wizard Dial *22899 Activation Wizard Activation Values You Need Master Subsidy Lock (MSL) or activation code MDN MEID None. All parameters are automatically transferred wirelessly. After activation, the settings are permanently stored in the CDMA module. Changing the OS loads will not affect any of the settings or activation parameters stored in the WAN modem. Carrier Sprint Verizon 70 Series Mobile Computer User Manual 55 Chapter 3 Use the Phone Start the Activation Wizard Depending on your wireless carrier, you may need to use the Windows Mobile Activation Wizard to activate your phone. 1 Tap Start > Phone, or tap the Phone button on the Tile bar. The phone application starts. 2 Tap Menu > Activation Wizard. Turn the Phone On and Off Before you can start using your phone, you need to enable it. You can use Wireless Center to enable and disable your phone, as well as Bluetooth and Wi-Fi communications. 1 Tap Start > Settings > Connections > Wireless Center. 2 Tap Phone to turn on the Phone 3 (Optional) To configure the phone, tap Menu in the tile bar at the bottom of the screen. 4 Tap OK when you are done configuring the options. 5 Tap OK to close Wireless Center. About Network Carriers Your Flexible Network Radio-enabled CN70, CN70e, or CK70 mobile computer contains a highly configurable WWAN platform. When you switch network carriers, or perform a clean boot, the cellular network connection is automatically configured. 56 70 Series Mobile Computer User Manual Switch Network Carriers Chapter 3 Use the Phone Use the Carrier Selection application to quickly change your WWAN radio network carrier on your Flexible Network Radio-enabled CN70, CN70e, or CK70 mobile computer. 1 Tap Start > Settings > Personal > Carrier Selection. 2 Select a Carrier and tap OK. A dialog box appears asking if you want to switch carriers. 3 Tap Yes to switch carriers. If the update is successful, the Carrier Selection screen appears and displays the updated carrier information. If the update is unsuccessful, a message box appears. Tap Ok to return to the Carrier Selection screen. 70 Series Mobile Computer User Manual 57 Chapter 3 Use the Phone Add the WWAN Connection If you are switching to a CDMA network, or switching from a CDMA network to a UMTS network, you must add the WWAN connection in Intermec Settings. 1 Tap Start > Settings > System > Intermec Settings >
Communications > WWAN Radio. 2 Select Add New WWAN Connection. 3 Enter a Connection Name. In the Phone Number field, enter #777 and tap OK. The Manage WWAN Radio State screen appears. 58 70 Series Mobile Computer User Manual 4 From Active Connection, select your Connection Name and Connect Now and tap OK. Chapter 3 Use the Phone About the Network Connection Note: When you perform a clean boot, the selected carrier will default to generic UMTS. When you perform a clean boot, all user-created network connection entries are deleted, and only the generic UMTS remains. After you perform a clean boot, you can find more information about generic UMTS by tapping Start > Settings > Connections > Connections >
Tasks tab > Manage Existing Connections > Modem tab. 70 Series Mobile Computer User Manual 59 Chapter 3 Use the Phone Make a Phone Call After you activate your UTMS or CDMA phone, you are ready to start making phone calls. Note: Your Flexible Network Radio mobile computer is data only. You cannot make phone calls from the Flexible Network Radio. 1 Press Phone. 2 Tap the keys to enter the telephone number you want to call, and tap Talk. Make an Emergency Phone Call You can use the UMTS phone to make an emergency phone call even if the SIM card is missing. When the SIM card is not installed, the phone will show that you have no service. However, if you dial certain emergency numbers (such as 112, 911, 000, 08, 118, 119, and 999) the call will go through. Note: Your Flexible Network Radio mobile computer is data only. You cannot make phone calls from the Flexible Network Radio. 60 70 Series Mobile Computer User Manual 4 Use the Camera You can use the color camera to take pictures and record videos. 61 Chapter 4 Use the Camera About the Color Camera The camera and flash are located on the back of the computer. You run the Pictures & Videos application to access the camera features. Note: While the Pictures & Videos application is running, you cannot use the imager. In the Pictures & Videos application, you can:
configure camera settings. take, view, and edit pictures. switch between Still (camera) mode and Video mode. record and launch video clips stored on the computer or a microSD card. You can send pictures and video clips to others or save an image as the background on the Home screen. If you download the eMDI application, it uses the camera to capture images. About the Camera Settings You can configure camera settings to meet the needs of your operating environment:
Basic camera settings are available from the main menu of the Pictures & Videos application. Advanced camera settings are available from the Settings menu option from the main menu of the Pictures & Videos application. Basic Camera Settings Setting Mode Description Determines the camera operating mode:
Normal: Takes one picture. Burst: Takes a series of three pictures. Timer: Waits 10 seconds before taking the picture. Resolution Determines the resolution of the image. You can select values Zoom for image resolution or screen resolution. Determines the amount of zoom: from 1x to 4x. 62 70 Series Mobile Computer User Manual Chapter 4 Use the Camera Setting Scenes Settings Torch Flash Focus Focus Distance Description Predefined scenes that optimize the camera settings for a specific environment:
DocCap: Intermec document capture. Check: Capture images of paper checks. Night: Low light conditions. Cloudy: Cloudy or overcast conditions. Daylight: Bright sun. Van Interior: Dimly lit vehicle interior. Warehouse: Warehouse environment. Office Store: Office or store environment. Manual: Manually configure a specific set of camera settings. Auto: The camera automatically configures the settings. Advanced camera settings that you can configure. See the next table, Advanced Camera Settings. The state of the camera flash depending on the lighting conditions: on, off, or automatic. The state of the camera flash when you take a picture: on, off, or automatic. Determines if the focus is continuous, single shot, or manual. If you select manual focus, you need to set the Focus Distance. The distance at which the camera focuses. Values are 2.5 in, 4.5 in, 7.5 in, 1-3 ft, 3-9 ft, and Infinity (focuses the lens so that an infinitely distant object would be in focus). Advanced Camera Settings Setting Exposure Metering Description The area of the image the camera uses to determine optimal exposure:
Whole Avg.: Uses the image as a whole. Whole Center Weight: Uses the entire image but places emphasis on the center quarter of the image. Center 1/4 Avg.: Uses the center quarter of the image. Lower 1/4 Avg.: Uses the lower quarter of the image. Upper 1/4 Avg.: Uses the upper quarter of the image. Lower 1/2 Avg.: Uses the lower half of the image. Upper 1/2 Avg.: Uses the upper half of the image. Default is Center 1/4 Avg. 70 Series Mobile Computer User Manual 63 Chapter 4 Use the Camera Setting Exposure Description Exposure level of the image. Values are from -2.5 (darker, underexposed) to +2.5 (lighter, overexposed) in increments of 0.5. Default is 0. Brightness Brightness level of the image. Manual settings are from -4 (very Contrast dark) to +4 (very light) in increments of 1. Default is Auto. Amount of contrast in the image. Manual settings are from -4
(least contrast) to +4 (most contrast) in increments of 1. Default is Auto. Saturation Color saturation level. Manual settings are from -4 (black and Sharpness White Balance Flash Profile DeNoise white) to +4 (maximum color) in increments of 1. Default is Auto. Sharpness of the image. Manual settings are from -4 (very soft) to +4 (very sharp) in increments of 1. Default is Auto. Compensates for specific lighting conditions to produce true color images:
Auto: Automatic White Balance (AWB) control. Sunny: Outdoors in bright, midday sunny conditions. Cloudy: Outdoors with a completely overcast cloudy sky. Tungsten: Indoors lit with tungsten light bulbs. Office: Indoors lit with fluorescent light bulbs. Default is Auto. Controls the amount of flash for a specific condition:
0: This profile is reserved. 1: Document imaging in light to moderately light ambient conditions. 2: Dark, semi-reflective environments, such as a vehicle interior or dimly lit room. 3: Dark, non-reflective large or outdoor environments. Provides very long flash durations. 4: This profile is reserved. Default is 1. Controls the amount of noise, or graininess, in the image:
Disabled: Disable noise reduction. Normal: Use normal noise reduction. Enhanced: Enhance the noise reduction. 64 70 Series Mobile Computer User Manual Configure the Camera Chapter 4 Use the Camera Use the Pictures & Videos application to configure the camera. Note: You can also use Intermec Settings to configure some camera options. 1 Tap Start > Pictures & Video. 2 To enter Still mode, tap the Camera icon in the grid or the Camera button on the Tile bar. 3 Tap Menu. 4 Select a setting to configure. Configure Camera Scenes You can modify predefined camera scenes or create new scenes to further accommodate your specific needs. 1 Tap Start > SceneEditor. 2 Select a Scene to configure. Or, to create a new scene, tap New. 3 Configure the necessary settings. If you are creating a new scene, type a name in the Scene box. 4 Tap Save. 5 When you are prompted to save the settings, tap Yes. The changes you made are saved. 6 Tap ok to close the message box. 70 Series Mobile Computer User Manual 65 Chapter 4 Use the Camera Take a Picture When you take a picture, the image is saved as a .jpg file and stored in the /My Documents/My Pictures folder. 1 Tap Start > Pictures & Videos. 2 Tap the Camera icon in the grid or the Camera button on the Tile bar, or press Enter. 3 Using the screen as a viewfinder, move the camera until you have the image you want to take a picture of. 4 Hold the camera as still as possible, and press Enter to take and save the picture. If you choose to save your pictures to Main memory, they are saved to permanent storage on your mobile computer. Record a Video You need to switch to video mode to record video. When you record video, the video is saved as an .mp4 file and stored in the /My Documents/My Pictures folder. 1 Tap Start > Pictures & Videos. 2 Tap the Camera icon in the grid or the Camera button on the Tile bar, or press Enter. 3 Tap Menu > Video. 4 Using the screen as a viewfinder, move the video camera until you see the scene you want to video record. 5 Press Enter to start recording. 6 When you are done, tap Stop or press Enter to stop recording and save the video. If you choose to save your videos to Main memory, they are saved to permanent storage on the computer. 66 70 Series Mobile Computer User Manual Save Pictures and Videos to a microSD Card Chapter 4 Use the Camera Pictures and videos are automatically saved to the main memory on your computer. You can save your pictures and video to a microSD card to easily transport them to another device. 1 Install a microSD card. For help, see Insert a MicroSD Card on page 30. 2 Tap Start > Pictures & Videos. 3 Tap the camera icon. 4 Tap Menu > Options. 5 From the Save files to list, select SD card, and tap OK. 70 Series Mobile Computer User Manual 67 Chapter 4 Use the Camera 68 70 Series Mobile Computer User Manual 5 Use GPS The 70 Series computer comes equipped with an integrated Global Positioning System (GPS) receiver if your computer has phone capability (WWAN radio). The GPS receiver can deliver standards-based National Marine Electronics Association
(NMEA) data strings to GPS applications. 69 Chapter 5 Use GPS About the Integrated GPS on Your Computer Intermec recommends that you use the GPS Intermediate Driver
(GPSID) instead of directly accessing the GPS hardware. The GPSID is a Microsoft software component that interacts between applications and the GPS hardware. As a Microsoft software component, the GPSID:
allows multiple applications to simultaneously access the GPS data stream. provides access to GPS data without requiring applications to recognize and parse NMEA syntax. Use the GPSID Installed on the Computer To use the GPSID installed on your mobile computer, you need to configure the GPSID settings. 1 Tap Start > Settings > System > External GPS. The GPS Settings screen appears with Programs selected. 2 Select the COM port that you want your programs to use to get GPS data from your computer. 70 70 Series Mobile Computer User Manual 3 Tap Access in the horizontal scroll bar and select the Manage GPS automatically check box. Chapter 5 Use GPS 4 Tap OK. About the GPS Module Operating Modes gpsOneXTRA (UMTS computers only) The integrated GPS module has three operating modes:
Standalone MS Assisted (Mobile Station Assisted) In Standalone mode, the GPS module relies solely on GPS satellites to determine position. In MS Assisted mode, the computer can determine position without receiving GPS signals directly from satellites; instead, the computer receives GPS signals and information provided by the cellular network. Even when the computer can receive a satellite signal, MS Assisted can improve position accuracy and reduce the time to determine initial position (Time-To-First-Fix). Check with your cell phone carrier for availability and pricing for MS Assisted service. 70 Series Mobile Computer User Manual 71 Chapter 5 Use GPS Qualcomms gpsOneXTRA Assistance technology provides enhanced operation for Standalone GPS. This option enables the UMTS-enabled computer to automatically download a small assistance data file from the XTRA servers through a brief internet access session. To use this option, you must have a valid and activated WAN data connection. Note: Internet connection fees may apply. Another option you can configure with iGPS is the fix interval. The fix interval defines how often the GPS should provide new information. Larger intervals use less power, but many applications require small intervals to work correctly. The default for fix interval, in seconds, is 4. The Flexible Network Radio has a maximum interval of 4. Improve GPS Performance on the Computer Use the iGPS application to improve the performance of the GPS on your CN70, CN70e, or CK70 computer. Note: Anytime you change the GPS settings, the phone module automatically resets. 1 Go to Start > Settings > System > iGPS. 2 In the Fix Interval tab, enter a value for the fix interval. The default setting is 4 and should be optimized for most applications. 3 Tap the Fix Type tab and select one of these options: Standalone
(1), MS assisted (2), or Enable gpsOneXTRA (check box). 4 Tap OK. 72 70 Series Mobile Computer User Manual
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-06-15 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 2013-02-20 | 902.75 ~ 927.25 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
4 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 | Effective |
2016-06-15
|
||||
1 2 3 4 5 |
2013-02-20
|
|||||
1 2 3 4 5 | Applicant's complete, legal business name |
Intermec Technologies Corporation
|
||||
1 2 3 4 5 | FCC Registration Number (FRN) |
0022970339
|
||||
1 2 3 4 5 | Physical Address |
9680 Old Bailes Rd.
|
||||
1 2 3 4 5 |
Fort Mill, South Carolina 29707
|
|||||
1 2 3 4 5 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 | TCB Application Email Address |
g******@nwemc.com
|
||||
1 2 3 4 5 |
d******@nwemc.com
|
|||||
1 2 3 4 5 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 5 | Grantee Code |
EHA
|
||||
1 2 3 4 5 | Equipment Product Code |
1000CP01F
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 | Name |
B****** R********
|
||||
1 2 3 4 5 | Title |
VP & GC, Honeywell Scanning & Mobility
|
||||
1 2 3 4 5 | Telephone Number |
803-8********
|
||||
1 2 3 4 5 | Fax Number |
803-8********
|
||||
1 2 3 4 5 |
b******@honeywell.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 5 | DTS - Digital Transmission System | |||||
1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1000CP01F9, 1000CP02F9, 1001CP01F9 | ||||
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 5 | Original Equipment | |||||
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 | Grant Comments | Output power is conducted. Approval is for operation as a client only device without radar detection. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the holsters tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for Model 1001CP01F9 are Head: DSS 0.55 W/kg, DTS < 0.10 W/kg, NII < 0.10 W/kg; sum-SAR = 0.63 W/kg; Body-worn accessory: DSS 0.40 W/kg, DTS 0.31 W/kg, NII 0.34 W/kg; sum-SAR = 0.73 W/kg. The highest reported SAR values for Model 1000CP01F9 are Head: DSS 0.37 W/kg, DTS 0.16 W/kg, NII < 0.10 W/kg; sum-SAR = 0.54 W/kg; Body-worn accessory: DSS 0.62 W/kg, DTS 0.55 W/kg, NII 0.34 W/kg; sum-SAR = 1.17 W/kg. The highest reported SAR values for Model 1000CP02F9 are Head: DSS 0.54 W/kg, DTS 0.11 W/kg, NII < 0.10 W/kg; sum-SAR = 0.64 W/kg; Body-worn accessory: DSS 0.46 W/kg, DTS 0.44 W/kg, NII 0.29 W/kg; sum-SAR = 0.90 W/kg. | ||||
1 2 3 4 5 | Output power is conducted. Approval is for operation as a client only device without radar detection. Operation of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to the holsters tested for this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for Model 1001CP01F9 are Head: DSS 0.55 W/kg, DTS < 0.10 W/kg, NII < 0.10 W/kg; sum-SAR = 0.63 W/kg; Body-worn accessory: DSS 0.40 W/kg, DTS 0.31 W/kg, NII 0.34 W/kg; sum-SAR = 0.73 W/kg. The highest reported SAR values for Model 1000CP01F9 are Head: DSS 0.37 W/kg, DTS 0.16 W/kg, NII < 0.10 W/kg; sum-SAR = 0.54 W/kg; Body-worn accessory: DSS 0.62 W/kg, DTS 0.55 W/kg, NII 0.34 W/kg; sum-SAR = 1.17 W/kg. The highest reported SAR values for Model 1000CP02F9 are Head: DSS 0.54 W/kg, DTS 0.11 W/kg, NII < 0.10 W/kg; sum-SAR = 0.64 W/kg; Body-worn accessory: DSS 0.46 W/kg, DTS 0.44 W/kg, NII 0.29 W/kg; sum-SAR = 0.90 W/kg. | |||||
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 | Firm Name |
Element Materials Technology Seattle
|
||||
1 2 3 4 5 |
Northwest EMC, Inc.
|
|||||
1 2 3 4 5 | Name |
R**** W******
|
||||
1 2 3 4 5 |
G******** K******
|
|||||
1 2 3 4 5 | Telephone Number |
503-8********
|
||||
1 2 3 4 5 | Fax Number |
503-6********
|
||||
1 2 3 4 5 |
503-8********
|
|||||
1 2 3 4 5 |
R******@element.com
|
|||||
1 2 3 4 5 |
g******@nwemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC | 5180 | 5240 | 0.0251 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 CC ND | 5260 | 5320 | 0.0245 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 38 CC ND | 5500 | 5700 | 0.0195 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 38 CC | 5745 | 5825 | 0.0182 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.0072 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2412 | 2462 | 0.0532 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 902.75000000 | 927.25000000 | 0.9380000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC | 5180 | 5240 | 0.0251 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC | 5260 | 5320 | 0.0245 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC | 5500 | 5700 | 0.0195 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2412 | 2462 | 0.0532 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC | 2402 | 2480 | 0.0072 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC | 5745 | 5825 | 0.017 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC