|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2005-02-14
|
|
1 2 3 4 5 6 7 8
|
2005-02-10
|
|
1 2 3 4 5 6 7 8
|
2005-01-11
|
|
1 2 3 4 5 6 7 8
|
2004-08-13
|
|
1 2 3 4 5 6 7 8
|
2004-03-04
|
|
1 2 3 4 5 6 7 8
|
2004-01-14
|
|
1 2 3 4 5 6 7 8
|
2003-10-27
|
|
1 2 3 4 5 6 7 8
|
2001-09-27
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Intermec Technologies Corporation
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0022970339
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
9680 Old Bailes Rd.
|
|
1 2 3 4 5 6 7 8
|
Fort Mill, South Carolina 29707
|
|
1 2 3 4 5 6 7 8
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
d******@nwemc.com
|
|
1 2 3 4 5 6 7 8
|
g******@nwemc.com
|
|
1 2 3 4 5 6 7 8
|
H******@BABT.com
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
EHA
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
RFID915PCC-6
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
B****** R********
|
|
1 2 3 4 5 6 7 8
|
Title |
VP & GC, Honeywell Scanning & Mobility
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
803-8********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
803-8********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
b******@honeywell.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Northwest EMC, Inc.
|
|
1 2 3 4 5 6 7 8
|
Name |
G******** K******
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
22975 NW Evergreen Parkway
|
|
1 2 3 4 5 6 7 8
|
Hillsboro, Oregon 97124
|
|
1 2 3 4 5 6 7 8
|
United States
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
503-8********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
503-8********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
g******@nwemc.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Northwest EMC, Inc.
|
|
1 2 3 4 5 6 7 8
|
Name |
V**** A********
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
same as above
|
|
1 2 3 4 5 6 7 8
|
22975 NW Evergreen Parkway
|
|
1 2 3 4 5 6 7 8
|
same, Oregon 97124
|
|
1 2 3 4 5 6 7 8
|
Hillsboro, Oregon 97124
|
|
1 2 3 4 5 6 7 8
|
United States
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
503-8********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
503-8********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
v******@nwemc.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 6 7 8 | Yes |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RF Identification PC Card |
| 1 2 3 4 5 6 7 8 | RFID Gun |
| 1 2 3 4 5 6 7 8 | RF IDENTIFICATION PC CARD |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 8 | Original Equipment |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID:HN2SB555-2, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be colocated with grantees 700C containing three co-located portable radio modules (FCC ID: EHA700CSMC45-1, FCC ID: HN22011B- 2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located mobile radio modules (FCC ID: HN2SB555, FCC ID: HN22011B, and FCC ID: HN2ABTM3- 2). This radio may also be co-located with grantees 700C containing three co-located mobile radio modules (FCC ID: EHAEM3420, FCC ID: HN22011B, and FCC ID: EHABTS080). This radio may also be co-located with FCC ID: EHA700C-SMC45. This radio may also be co-located with grantees 700C containing mobile radio module (FCC ID: EHASMC46).When co-located with the 700C or with FCC ID: EHA700CSMC45, the antennas used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. When this radio is configured with panel antennas, Intermec Part Numbers 1-206589-00, ITA915017, IF6, and IV6, the antennas must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. A co-located transmitter operating configuration with grantees Bluetooth radio, Model C30XX, FCC ID: HN2-C30XX has been evaluated as described in this filing. Other co-location configurations require separate evaluation. When co-located with the C30XX, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID:HN2SB555-2, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be colocated with grantees 700C containing three co-located portable radio modules (FCC ID: EHA700CSMC45-1, FCC ID: HN22011B- 2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located mobile radio modules (FCC ID: HN2SB555, FCC ID: HN22011B, and FCC ID: HN2ABTM3- 2). This radio may also be co-located with FCC ID: EHA700C-SMC45. This radio may also be co-located with grantees 700C containing mobile radio module (FCC ID: EHASMC46).When co-located with the 700C or with FCC ID: EHA700CSMC45, the antennas used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. When this radio is configured with panel antennas, Intermec Part Numbers 1-206589-00, ITA915017, IF6, and IV6, the antennas must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. A co-located transmitter operating configuration with grantees Bluetooth radio, Model C30XX, FCC ID: HN2-C30XX has been evaluated as described in this filing. Other co-location configurations require separate evaluation. When co-located with the C30XX, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID: HN2SB555-2, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID: EHA700C-SMC45-1, FCC ID: HN22011B- 2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located mobile radio modules (FCC ID: HN2SB555, FCC ID: HN22011B, and FCC ID: HN2ABTM3- 2). This radio may also be co-located with FCC ID: EHA700C-SMC45. This radio may also be co-located with grantees 700C containing mobile radio module (FCC ID: EHASMC46).When co-located with the 700C or with FCC ID: EHA700CSMC45, the antennas used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. When this radio is configured with panel antennas, Intermec Part Numbers 1-206589-00 and ITA915017, the antennas must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID: HN2SB555-2, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID: EHA700C-SMC45-1, FCC ID: HN22011B- 2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located mobile radio modules (FCC ID: HN2SB555, FCC ID: HN22011B, and FCC ID: HN2ABTM3-2). This radio may also be co-located with FCC ID: EHA700C-SMC45. When co-located with the 700C or with FCC ID: EHA700CSMC45, the antennas used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. When this radio is configured with panel antennas, Intermec Part Numbers 1-206589-00 and ITA915017, the antennas must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID: HN2SB555-2, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located portable radio modules (FCC ID: EHA700C-SMC45-1, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with grantees 700C containing three co-located mobile radio modules (FCC ID: HN2SB555, FCC ID: HN22011B, and FCC ID: HN2ABTM3-2). This radio may also be co-located with FCC ID: EHA700C-SMC45. When co-located with the 700C or with FCC ID: EHA700C-SMC45, the antennas used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. This radio may also be co-located with grantees 700C containing three co-located radio modules (FCC ID: HN2SB555-2, FCC ID: HN22011B-2, and FCC ID: HN2ABTM3-3). This radio may also be co-located with FCC ID: EHA700C-SMC45. When co-located with the 700C or with FCC ID: EHA700C-SMC45, the antennas used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval. For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body). For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. Panel Antennas, Intermec Part Numbers 805-616-001 and 805-616-002 are only to be installed in the IP3 Scanner and must be installed to provide a separation distance of at least 20 cm from all persons. |
| 1 2 3 4 5 6 7 8 | Limited Modular Approval.
For hand held use, this device may only be used in the specific device (6110 terminal) and configurations as tested in the SAR report in the Certification filing. The highest reported SAR values are: 1.48 W/kg (Body).
For laptop use, the antennas used for this mobile device must be installed to provide a separation distance of at least 20 cm from all persons.
This device must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with specific operating instructions and antenna installation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Northwest EMC, Inc.
|
|
1 2 3 4 5 6 7 8
|
Intermec Technologies Corp.
|
|
1 2 3 4 5 6 7 8
|
TUV SUD Product Service
|
|
1 2 3 4 5 6 7 8
|
Intermec Technologies Corporation
|
|
1 2 3 4 5 6 7 8
|
Name |
G**** K********
|
|
1 2 3 4 5 6 7 8
|
C****** B********
|
|
1 2 3 4 5 6 7 8
|
J****** A******
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
503-8********
|
|
1 2 3 4 5 6 7 8
|
31984********
|
|
1 2 3 4 5 6 7 8
|
44-14********
|
|
1 2 3 4 5 6 7 8
|
319-8********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
503-8********
|
|
1 2 3 4 5 6 7 8
|
31984********
|
|
1 2 3 4 5 6 7 8
|
44-11********
|
|
1 2 3 4 5 6 7 8
|
319-8********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
g******@nwemc.com
|
|
1 2 3 4 5 6 7 8
|
c******@intermec.com
|
|
1 2 3 4 5 6 7 8
|
j******@tuv-sud.co.uk
|
|