| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 3 4 5 |
|
Compliance Insert | Users Manual | 1.40 MiB | August 06 2009 | |||
| 1 2 3 4 5 |
|
Users Manual | Users Manual | 3.38 MiB | August 06 2009 | |||
| 1 2 3 4 5 | Cover Letter(s) | |||||||
| 1 2 3 4 5 | External Photos | |||||||
| 1 2 3 4 5 | Test Report | |||||||
| 1 2 3 4 5 | Internal Photos | |||||||
| 1 2 3 4 5 | Cover Letter(s) | |||||||
| 1 2 3 4 5 | Test Report | |||||||
| 1 2 3 4 5 | Cover Letter(s) | |||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | October 09 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | October 09 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | October 09 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | October 09 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | External Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | ID Label/Location Info | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Internal Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | ID Label/Location Info | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | RF Exposure Info | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Cover Letter(s) | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | ID Label/Location Info | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | Test Setup Photos | August 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 | ||||||
| 1 2 3 4 5 | Test Report | August 06 2009 / September 06 2009 |
| 1 2 3 4 5 | Compliance Insert | Users Manual | 1.40 MiB | August 06 2009 |
Model CN50 Compliance Insert Caution: This marking indicates that the user should read all included documentation before use. The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Caution: For use with Intermec battery pack Models AB24 and AB25 only. For power supply, use Intermec Model AE36 or AE37. No user-serviceable parts. Battery Information Caution: The battery packs used with this product may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100C (212F). Do not short circuit, may cause burns. Keep away from children. Charge only in or with Intermec Models AC21, AD23, and AD24. Use of incorrect charger may present a risk of fire or explosion. Promptly dispose of used battery pack according to the instructions. Battery Recycling Information This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. Li-ion Li-ion Note: In the U.S.A, the EPA does not consider spent Li-ion batteries as hazardous waste. Laser Compliance and Precaution The CN50 is registered with the CDRH as a Class I LASER Product (21 CFR Subchapter J, Part 1040 with Laser Notice 50). Caution: There are no user serviceable parts inside the CN50. Use of controls or adjustments, or performance of procedures other than those specified herein, may result in hazardous laser light exposure. Note: There are no controls or adjustments provided for routine operation or maintenance of the CN50. Laser and Imager Compliance and Precaution This product complies with the following standards for laser safety:
IEC 60825-1/EN 60825-1 - Class 1 (embedded laser component <3mW) Intermec Technologies Corporation Intermec Technologies Corporation Intermec AB24 AB25 Intermec AE36 AE37 100 C (212 F) Intermec AC21AD23 AD24
( ) Intermec Technologies Li-ion Li-ion
IEC 60825-1/EN 60825-1 - Class 1 < 3mW Attention: Ce marquage indique que lusager doit, avant lutilisation, lire toute la documentation incluse. Utilisateurs de ce produit sont aviss dutiliser des accessoires et des priphriques approuvs par Intermec Technologies Corporation. Lutilisation daccessoires autres que ceux recommands ou des changements ce produit qui ne sont pas approuvs par Intermec Technologies Corporation peuvent annuler la conformit de ce produit et mettre fin au droit qua lusager dutiliser lquipement. Attention: Pour utilisation avec les bloc-piles AB24 et AB25 Intermec exclusivement. Pour lalimentation, utiliser le modle Intermec AE36 ou AE37. Ne contient aucune pice rparable par lutilisateur. Informations pour la pile Attention: Le bloc-piles utilis avec ce produit peut prendre feu, reprsenter un danger de brlure chimique, exploser ou dgager des matires toxiques s'il est maltrait. Ne pas lincinrer, ni le dmonter ni le chauffer plus de 100 C. Ne pas le court-circuiter car cela peut causer des brlures. Garder hors de la porte des enfants. Ne charger quavec les chargeurs Intermec modles AC21, AD23 et AD24. Lutilisation dun chargeur inappropri prsente un risque dincendie ou dexplosion. Jeter sans tarder les bloc-piles uss conformment aux instructions. Informations pour le recyclage de la pile Ce produit contient ou utilise une pile principale au lithium-ion (Li-ion). Lorsque la batterie atteint la fin de sa dure de vie utile, la batterie uses doivent tre mises aux rebuts par un agent de recyclage ou un manipulateur de matriaux dangereux agr. Il ne faut pas mlanger la batterie aux autres dchets solides. Pour plus dinformations sur le recyclage ou la mise aux rebuts, contacter votre centre de services Intermec Technologies. Li-ion Li-ion Conformit et prcautions pour lutilisation du laser Le CN50 est enregistr auprs du CDRH titre de produit au laser de Classe I (21 CFR Sous-chapitre J, Partie 1040 avec avis sur le laser 50). Attention: Le CN50 ne contient aucune pice rparable par lutilisateur. Lutilisation de commandes ou de rglages, ou lexcution de procdures autres que ce qui est spcifi aux prsentes, peut prsenter une exposition dangereuse la lumire laser. Remarque: Il ny a pas de contrles ou dajustements fournis pour le fonctionnement ou lentretien priodique du CN50. Conformit et prcautions pour lutilisation du laser et de limageur Ce produit est conforme aux normes suivantes visant la scurit quant au laser:
IEC 60825-1/EN 60825-1 - Classe 1 (composant laser intgr < 3 mW) Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen lesen soll. Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehrteile und Peripheriegerte zu verwenden, die von Intermec Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehrteile verwendet oder an diesem Produkt nderungen vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behrdliche Konformitt des Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Gerts verlieren. Vorsicht: Zur Verwendung mit den Intermec-Akkusatzmodellen AB24 und AB25. Als Netzteil Intermec Modell AE36 oder AE37 verwenden. Enthlt keine Teile, die vom Benutzer gewartet werden knnen. Akku-Informationen Vorsicht: Der in diesem Produkt verwendete Akkusatz kann sich bei Missbrauch entznden, chemische Vertzungen verursachen, explodieren oder toxische Substanzen freisetzen. Nicht verbrennen, zerlegen oder ber 100 C erwrmen. Keinen Kurzschluss verursachen; Verbrennungsgefahr. Von Kindern fern halten. Zum Laden nur die Intermec-Ladegert-Modelle AC21, AD23 und AD24 verwenden. Wenn ein falsches Ladegert verwendet wird, besteht Brand- oder Explosionsgefahr. Die verbrauchten Akkustze sofort gem Anweisungen entsorgen. Informationen zum Recycling von Batterien Dieses Produkt enthlt oder verwendet einen Lithiumionen-Hauptakku. Wenn die Batterie ausgedient hat, sollte sie durch einen qualifizierten Recycler oder durch den Sondermll entsorgt werden. Werfen Sie die Batterie nicht in den Abfall. Setzen Sie sich mit Ihrem Intermec Technologies Service-Zentrum in Verbindung, um weitere Informationen zum Recycling oder Entsorgen zu erhalten. Li-ion Li-ion Laser- und Imager-Konformitt und Vorsichtsvorkehrungen Dieses Produkt entspricht den folgenden Laser-Sicherheitsnormen:
IEC 60825-1 / EN 60825-1 - Klasse 1 (integrierte Laser-Komponente < 3 mW) Cuidado: Esta identificao indica que o usurio deve ler toda a documentao fornecida antes do uso. Os usurios deste produto devem usar acessrios e perifricos aprovados pela Intermec Technologies Corporation. Usar acessrios no recomendados, ou fazer alteraes neste produto no aprovadas pela Intermec Technologies Corporation, poder anular a conformidade deste produto e resultar na perda da permisso do usurio de utilizar o equipamento. Cuidado: Para uso apenas com os modelos de baterias AB24 e AB25 da Intermec. Use o modelo AE36 ou AE37 da Intermec como fonte de alimentao. Este equipamento no contm peas que possam ser reparadas pelo usurio. Informaes Sobre a Bateria Cuidado: A bateria utilizada neste produto pode pegar fogo, criar risco de queimadura qumica, explodir ou exalar materiais txicos se abusada. No incinerar, desmontar nem aquecer a bateria a mais de 100C. No provocar curto-circuito, pois pode causar queimaduras. Manter afastada de crianas. Carregar apenas em ou com os modelos AC21, AD23 e AD24 da Intermec. O uso de um carregador incorreto pode gerar risco de incndio ou exploso. Descartar imediatamente as baterias usadas segundo as instrues fornecidas. Infomaes de Reciclagem de Bateria Este produto contm ou usa uma bateria principal de on de ltio (Li-ion). Quando a bateria chega ao fim da sua vida til, deve ser descartada por um profissional de reciclagem qualificado ou por um especialista no manuseio de materiais perigosos. No misture a bateria com fluxo de lixo slido. Entre em contato com seu Centro de Servios de Tecnologia Intermec para informaes de reciclagem ou descarte. Li-ion Li-ion Normas e Precaues Para Dispositivo Laser ou de Captura de Imagens Este produto est de acordo com os seguintes padres de segurana laser:
IEC 60825-1 / EN 60825-1 - Classe 1 (componente laser embutido < 3 mW)
, , Intermec Technologies Corporation. , ,
, Intermec Technologies Corporation,
: AB24 AB25. Intermec AE36 AE37. , , .
. , , 100C (212 F). . Intermec AC21, AD23 AD24. Li-ion Li-ion
- (Li-ion) .
- Intermec Technologies.
IEC 60825-1 / EN 60825-1, 1 ( < 3 ) Precaucin: Esta marca indica que el usuario debe leer toda la documentacin incluida antes del uso. Se advierte a los usuarios de este producto que usen accesorios y perifricos aprobados por Intermec Technologies Corporation. El uso de accesorios aparte de los recomendados, o los cambios a este producto que no estn aprobados por Intermec Technologies Corporation, pueden anular el cumplimiento de este producto y ocasionar la prdida de la autorizacin del usuario para operar el equipo Precaucin: Para usar solamente con los modelos de batera AB24 y AB25 de Intermec. Para la fuente de alimentacin, use el Modelo AE36 o AE37 de Intermec. No hay piezas a las cuales pueda dar servicio el usuario. Informacin de la batera Precaucin: El paquete de batera, Modelos AB24 o AB25, usado con este producto puede inflamarse, crear un riesgo de quemadura qumica, explotar o emitir materiales txicos si se trata indebidamente. No incinere, desarme ni caliente sobre 100C. No haga cortocircuitos, puede causar quemaduras. Mantenga alejado de los nios. Cargue solamente con los Modelos Intermec AC21, AD23 y AD24. El uso del cargador incorrecto puede presentar un riesgo de incendio o explosin. Descarte rpidamente los paquetes de batera usados conforme a las instrucciones. Informacin acerca del reciclaje de la batera Este producto contiene o usa una batera principal de iones de litio (Li-ion). Cuando la batera llega al final de su vida til, debe ser desechada por personal especializado en reciclaje de materiales o manejo de materiales peligrosos. No mezcle la batera con otros residuos slidos. Pnganse en contacto con su Centro de servicio de Intermec Technologies para obtener informacin sobre reciclaje o desecho de materiales. Li-ion Li-ion Increase the separation between the computer equipment and receiver. IEC 60825-1 / EN 60825-1 - Class 1 (componente lser incorporado < 3mW) Acatamiento y precaucin de lser y del dispositivo de imgenes Este producto cumple con los siguientes estndares para seguridad de lser:
For Users Within North and South America FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the radio or television receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. Consult the dealer or an experienced radio television technician for help. Canadian Digital Apparatus Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Hearing Aid Compatibility (HAC) The CN50 conforms to the FCC rules and ANSI C63.19:2007, and is rated M3 with the rating statement located on its box. The Hearing Aid Compatibility Act of 1988 (HAC Act) requires digitial wireless phones to be compatible with hearing-aids to ensure reasonable access to telecommunications services for persons with hearing disabilities. Some hearing devices (hearing aids and cochlear implants) used near some wireless phones may detect interference with buzzing, humming, or whining noise. Some hearing devices are more immune than others to that noise and phones also vary in the amount of interference they generate. Results will vary depending on the users hearing device and hearing loss. If your hearing device is vulnerable to interference, even a rated phone may not be used successfully. A rating system developed by the Alliance for Telecommunications Industries Solutions (ATIS) for wireless phones is intended to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices, where M4 is the better/
higher rating. Phones rated T3 or T4 meet FCC requirements and are likely to be more useable with a hearing devices telecoil (T Switch or Telephone Switch), if so equipped, compared to unrated phones, where T4 is the better/higher rating. To check compatibility of your hearing device with this wireless device, the numeric rating values of your hearing device and this wireless device should be added together. A sum of 5 is acceptable for normal use and a sum of 6 or higher is better. Important Radio Information The CN50 complies with Parts 15, 22, and 24 of the FCC rules and with RSS-132, -133, and -210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Radiation Exposure Statement - Specific Absorption Rate (SAR) Information This equipment complies with the FCC and Industry Canada RSS-102 radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operation instruction for satisfying RF exposure compliance. Please follow operation instructions as documented for this product. This product meets the RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of other accessories may not ensure compliance with RF exposure guidelines. When installing and using this product within a 20-cm (8-inch) distance (per MPE calculation) from the CN50 to the body or head of the user or nearby persons, the time duration of such exposure must be minimized to protect the user from harmful RF radiation effects. The antenna must not be touched during transmitter operation. For residents of Canada and the United States and other countries/regions that have adopted the SAR limit recommended by the Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65C and Industry Canada RF exposure standard RSS-102, the maximum allowed SAR value is 1.6 W/kg over 1 g of tissue. Radio Frequency (RF) Exposure and Specific Absorption Rate (SAR) Test Results for Intermec Model CN50:
Simultaneous radios UMTS/HSPA radio 802.11b/g radio Bluetooth radio 0.294 (SAR-to-Peak Location Separation Ratio, antenna to antenna) 0.341 W/kg (maximum SAR value tested at the ear) 1.21 W/kg (maximum SAR value tested for body-worn operation) 0.0056 W/kg (maximum SAR value tested at the ear) 0.026 W/kg (maximum SAR value tested for body-worn operation) Negligible due to very low output power. lattention des utilisateurs en Amrique du Nord et du Sud Conformit aux normes canadiennes sur les appareils numriques Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. Compatibilit des prothses auditives (CPA) Le CN50 est conforme aux rglements du FCC et la norme ANSI C63.19:2007, et est classifi M3 (l'nonc de classification est indiqu sur la bote). La Loi des tats-Unis de 1988 sur la compatibilit des prothses auditives ( Hearing Aid Compatibility Act ou HAC Act ) exige que les tlphones sans fil soient compatibles avec les prothses auditives afin de permettre un accs raisonnable aux services de tlcommunications par les personnes ayant un trouble de laudition. Certains appareils auditifs (prothses auditives et implants cochlaires) utiliss proximit de certains tlphones sans fil peuvent dtecter de linterfrence sous forme dun bruit de bourdonnement, de ronflement ou de sirnement. Certains appareils auditifs sont plus rsistants que dautres ce bruit et la quantit d'interfrence gnre peut aussi varier en fonction du tlphone. Les rsultats varient aussi en fonction de lappareil auditif et du trouble daudition de lutilisateur. Si votre appareil auditif est vulnrable linterfrence, lutilisateur pourrait prouver des difficults mme avec un tlphone classifi conforme. Un systme de classification pour les tlphones sans fil a t dvelopp par le Alliance for Telecommunications Industries Solutions (ATIS) des tats-Unis afin daider les utilisateurs de dispositifs auditifs trouver les tlphones susceptibles dtre compatibles avec leurs appareils auditifs. Tous les tlphones nont pas fait lobjet dune classification. Les tlphones classifis M3 ou M4 sont conformes aux exigences de la FCC et il est probable qu'ils produisent moins dinterfrence pour les appareils auditifs (la classification M4 est suprieure la classification M3). Les tlphones classifis T3 ou T4 sont conformes aux exigences de la FCC et il est probable qu'ils sont davantage compatibles avec le bobinage de lappareil auditif (commutateur T ou commutateur tlphonique), le cas chant, comparativement aux tlphones non classifis (la classification T4 est suprieure la classification T3). Pour vrifier la compatibilit de votre appareil auditif avec cet appareil sans fil, les valeurs de classification numriques de votre appareil auditif et ceux de cet appareil sans fil doivent tre ajoutes lune lautre. Un total de 5 est acceptable pour une utilisation normale et un total de 6 ou suprieur est prfrable. Renseignements importants sur les radiofrquences Le dispositif CN50 est conforme aux parties 15, 22 et 24 des rglements du FCC et aux normes CNR132, -133 et -210 dIndustrie Canada. Lutilisation est assujettie aux deux conditions suivantes : (1) Ce dispositif ne doit pas causer dinterfrence dommageable et (2) Ce dispositif doit tolrer toute interfrence, incluant linterfrence pouvant causer un fonctionnement indsirable. nonc sur l'exposition aux radiations - Information sur le dbit dabsorption spcifique
(DAS) Cet appareil est conforme aux limites dexposition au rayonnement du FCC des tats-Unis et de la norme CNR-102 du Industrie Canada pour un environnement non contrl. Les utilisateurs finaux doivent suivre les modes demploi spcifiques afin de respecter les directives sur lexposition aux RF. Veuillez suivre le mode demploi dans la documentation accompagnant ce produit. Ce produit est conforme aux directives sur lexposition aux RF lorsqu'il est utilis avec les accessoires Intermec fournis ou conus pour ce produit. Lutilisation dautres accessoires peut ne pas garantir la conformit aux directives sur lexposition aux RF. Lorsque ce produit est install et utilis une distance de 20 cm (selon le calcul MPE) depuis le CN50 le corps ou la tte de lutilisateur ou des personnes, le temps dexposition doit tre minimis afin de protger lutilisateur des effets dommageables du rayonnement RF. On ne doit pas toucher lantenne pendant le fonctionnement de lmetteur. Pour les rsidents du Canada et des tats-Unis et dautres pays ou rgions qui ont adopt les limites du DAS recommandes par le Bulletin 65C du Federal Communications Commission Office of Engineering and Technology (OET) et la norme CNR-102 dIndustrie Canada sur lexposition aux RF, la valeur du DAS maximal permise est de 1,6 W/kg pour 1 g de tissu. Rsultats des essais de lexposition et dbit dabsorption spcifique (DAS) de la radiofrquence (RF) pour le modle Intermec CN50:
Radios simultanes Radio UMTS/HSPA Radio 802,11b/g Radio Bluetooth 0.294 (ratio de sparation DAS--Emplacement de crte, antenne antenne) 0.341 W/kg (valeur DAS maximale vrifie loreille) 1.21 W/kg (valeur DAS maximale vrifie lorsque port sur le corps) 0.0056 W/kg (valeur DAS maximale vrifie loreille) 0.026 W/kg (valeur DAS maximale vrifie lorsque port sur le corps) Ngligeable et due une alimentation de sortie trs faible. Para usurios das Amricas do Norte e do Sul Compatibilidade com aparelhos auditivos (HAC) O CN50 est em conformidade com as regras da FCC e ANSI C63.19:2007, sendo classificado nas categorias M3 com a declarao de classificao localizada em sua caixa. A Lei de Compatibilidade com Aparelhos Auditivos (Lei HAC) dos EUA de 1988 requer que telefones sem fio digitais sejam compatveis com aparelhos auditivos para assegurar acesso razovel aos servios de telecomunicao a pessoas com deficincias auditivas. Alguns dispositivos (aparelhos auditivos e implantes cocleares), quando usados prximos de alguns telefones sem fio, podem detectar interferncia com zumbidos, zunidos ou chiados. Alguns aparelhos auditivos so mais imunes que outros a esses rudos e os telefones tambm apresentam variao em termos da quantidade de interferncia que geram. Os resultados variam, dependendo do aparelho auditivo e do grau de perda auditiva do usurio. Se o seu aparelho auditivo for vulnervel interferncia, pode haver problemas para usar at mesmo um telefone classificado como adequado para uso com aparelhos auditivos. Um sistema de classificao desenvolvido pela Alliance for Telecommunications Industries Solutions (ATIS) para telefones sem fio visa auxiliar os usurios de aparelhos auditivos a encontrar telefones que podem ser compatveis com seus aparelhos auditivos. Nem todos os telefones foram classificados. Os telefones com classificao M3 ou M4 atendem aos requisitos da FCC e provavelmente geraro menos interferncia em aparelhos auditivos, sendo que M4 a classificao melhor/mais elevada. Os telefones com classificao T3 ou T4 atendem aos requisitos da FCC e provavelmente so mais utilizveis com a bobina telefnica de um aparelho auditivo (comutador telefnico), se equipado com uma, comparado com telefones sem classificao, sendo que T4 a classificao melhor/mais elevada. Para verificar a compatibilidade do seu aparelho auditivo com este dispositivo sem fio, os valores de classificao numrica do seu aparelho auditivo e deste dispositivo sem fio devem ser somados. Uma soma de 5 aceitvel para uso normal e uma soma de 6 ou superior melhor. Informaes importantes sobre rdio O CN50 est em conformidade com as Partes 15, 22 e 24 das regras da FCC e com as normas RSS-132, -133, e 210 do Ministrio da Indstria do Canad. Sua operao est sujeita s duas condies seguintes: (1) Este equipamento no deve causar interferncia prejudicial e (2) Este equipamento deve aceitar qualquer interferncia recebida, inclusive interferncias que possam resultar em mau funcionamento. Declarao de exposio radiao - Taxa de absoro especfica (SAR) Este equipamento est em conformidade com os limites de exposio radiao estabelecidos pela FCC e RSS-102 Ministrio da Indstria do Canad para um ambiente no controlado. Os usurios finais devem seguir as instrues operacionais especficas para atender aos critrios de conformidade com a exposio RF. Siga as instrues operacionais como informadas para esse produto. Este produto atende s diretrizes de exposio RF quando utilizado com os acessrios Intermec fornecidos ou destinados a este produto. O uso de outros acessrios pode resultar em no conformidade com as diretrizes de exposio RF. Ao instalar e usar este produto a uma distncia de 20 cm ou menos (conforme clculo de MPE) entre o CN50 e o corpo ou a cabea do usurio, ou de pessoas prximas, a durao a exposio deve ser minimizada para proteger o usurio contra efeitos nocivos da radiao de RF. A antena no deve ser tocada quando o transmissor estiver em uso. Para residentes do Canad e dos Estados Unidos, e de outros pases/regies que adotaram o limite de SAR recomendado pelo Boletim 65C do Escritrio de Engenharia e Tecnologia (OET) da Comisso Federal de Comunicaes (FCC) dos EUA e pela norma RSS-102 de exposio RF do Ministrio da Indstria do Canad, o valor mximo de SAR permitido 1,6 W/kg sobre 1 g de tecido. Resultados dos testes de exposio radiofrequncia (RF) e taxa especfica de absoro (SAR) do modelo CN50 da Intermec:
Rdios simultneos Rdio UMTS/HSPA Rdio 802.11b/g Rdio Bluetooth 0.294 (relao de separao de localizao SAR-a-Pico, antena para antena) 0.341 W/kg (valor mximo de SAR testado no ouvido) 1.21 W/kg (valor mximo de SAR testado para operao quando instalado no corpo) 0.0056 W/kg (valor mximo de SAR testado no ouvido) 0.026 W/kg (valor mximo de SAR testado para operao quando instalado no corpo) Desprezvel em virtude de muito baixa potncia de sada. Para usuarios dentro de Amrica del Norte y del Sur Compatibilidad con audfonos para sordera (HAC) El CN50 est en conformidad con las reglas de la FCC y ANSI C63.19:2007, adems tiene calificacin M3 y ostenta la declaracin de calificacin en su caja. La Ley de Compatibilidad con Audfonos (Hearing Aid Compatibility Act, HAC Act) de 1988 exige que los telfonos inalmbricos digitales sean compatibles con audfonos para sordera con el fin de asegurar el acceso razonable a los servicios de telecomunicaciones para las personas con discapacidades auditivas. Algunos dispositivos auditivos (audfonos para sordera e implantes cocleares) utilizados cerca de telfonos inalmbricos pueden detectar interferencia con ruido de zumbidos, murmullos o chirridos. Algunos dispositivos auditivos son ms inmunes que otros a ese ruido y los telfonos tambin varan en la cantidad de interferencia que generan. Los resultados varan dependiendo del dispositivo auditivo y de la sordera del usuario. Si su dispositivo auditivo es vulnerable a la interferencia, incluso un telfono con calificacin adecuada puede no utilizarse satisfactoriamente. Un sistema de calificacin creado por la Alianza para Soluciones de la Industria de Telecomunicaciones (Alliance for Telecommunications Industries Solutions, ATIS) para telfonos inalmbricos est destinado a ayudar a los usuarios de dispositivos auditivos a encontrar telfonos que puedan ser compatibles con sus dispositivos. No todos los telfonos han sido calificados. Los telfonos calificados M3 o M4 cumplen con los requisitos de la FCC y es probable que generen menos interferencia a los dispositivos auditivos, donde M4 es la calificacin mejor y ms alta. Los telfonos calificados T3 o T4 cumplen con los requisitos de la FCC y es probable que sean ms utilizables con un cable telecoil (Interruptor T Switch o telefnico) del dispositivo auditivo, si est equipado con l, en comparacin con telfonos sin calificacin, donde T4 es la calificacin mejor y ms alta. Para revisar la compatibilidad de su dispositivo auditivo con este dispositivo inalmbrico, deben sumarse juntos los valores de calificacin numrica de su dispositivo auditivo y este dispositivo inalmbrico. Una suma de 5 es aceptable para el uso normal y una suma de 6 o ms alta es mejor. Informacin importante de radio El modelo CN50 cumple con los Apartados 15, 22 y 24 de las reglas de la FCC y con RSS-132, -133 y -210 de Industry Canada. La operacin est sujeta a las siguientes dos condiciones: (1) Este dispositivo no puede causar interferencia daina y (2) Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo la interferencia que pueda causar un funcionamiento no deseado. Declaracin de exposicin a la radiacin - ndice de absorcin especfico (SAR) Este equipo cumple con los lmites de exposicin a radiacin de la FCC y de Industry Canad (RSS-102) establecidos para un ambiente no controlado. Los usuarios finales deben seguir las instrucciones de operacin especficas para satisfacer el cumplimiento de la exposicin a RF. Siga las instrucciones de operacin segn se han documentado para este producto. Este producto cumple con las pautas de exposicin de RF al utilizarse con los accesorios Intermec suministrados o designados para este producto. El uso de otros accesorios puede no asegurar el cumplimiento con las pautas de exposicin de RF. Al instalar y usar este producto dentro de una distancia de 20 cm (segn el clculo de MPE) del CN50 al cuerpo o la cabeza del usuario o personas cercanas, debe reducirse al mnimo la duracin de dicha exposicin para proteger al usuario contra los efectos nocivos de la radiacin RF. No debe tocarse la antena durante la operacin del transmisor. Para residentes de Canad y los Estados Unidos y otros pases/regiones que han adoptado el lmite de SAR recomendado por la Oficina de Ingeniera y Tecnologa (OET) de la Comisin Federal de Comunicaciones (FCC) Boletn 65C y el estndar de exposicin de RF de Industry Canada RSS-102, el valor mximo permisible de SAR es de 1.6 W/kg sobre 1 g de tejido. Resultados de pruebas de exposicin de radiofrecuencia (RF) y tasa de absorcin especfica (SAR) para el Modelo CN50 de Intermec:
Radios simultneos Radio UMTS/HSPA 0.294 (Relacin de separacin de ubicacin SAR-a-Pico, antena a antena) 0.341 W/kg (valor SAR mximo probado en el odo) 1.21 W/kg (valor mximo SAR probado para operacin usada en el cuerpo) 0.0056 W/kg (valor SAR mximo probado en el odo) 0.026 W/kg (valor mximo SAR probado para operacin usada en el cuerpo) Insignificante debido a muy baja alimentacin de salida. Radio 802.11b/g Radio Bluetooth For Users in All Other Regions Important Radio Information Intermec Technologies Corporation declares that the CN50 is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive (1999/5/EC). The CN50 product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Community. Specific Absorption Rate (SAR) This product meets the EN 50360, EN 62209-1, and EN 602209-2 RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of other accessories may not ensure compliance with these RF exposure guidelines. For residents of the European Union and other countries/regions that have adopted the International Commission on Non-
Ionizing Radiation Protection (ICNIRP) SAR limit, the maximum allowed SAR value is 2.0 W/kg over 10 g of tissue. Radio Frequency (RF) Exposure and Specific Absorption Rate (SAR) Test Results for Intermec Model CN50:
GSM900 GSM1800 UMTS2100 802.11b/g Bluetooth 0.026 W/kg (maximum SAR value tested at the ear) 0.322 W/kg (maximum SAR value tested for body-worn operation) 0.011 W/kg (maximum SAR value tested at the ear) 0.081 W/kg (maximum SAR value tested for body-worn operation) 0.188 W/kg (maximum SAR value tested at the ear) 0.131 W/kg (maximum SAR value tested for body-worn operation) 0.0026 W/kg (maximum SAR value tested at the ear) 0.011 W/kg (maximum SAR value tested for body-worn operation) Negligible due to very low output power. X Yes No License Required Restrictions Details The following table indicates the areas of intended use of the equipment and any known restrictions. EU Country of Intended Use Austria Belgium Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Ireland Italy Latvia Lithiuania Luxembourg Malta The Netherlands Poland Portugal Slovakia Slovenia Spain Sweden United Kingdom X X X X X X X X X X X X X X X X X X X X X X X X X Outdoor frequency operation restricted to 2446.5 Mhz to 2483.5 MHz. EU Country of Intended Use Iceland Liechtenstein Norway Switzerland Yes No License Required Restrictions Details X X X X Intermec Technologies Corporation CN50 R&TTE (1999/5/EC) CN50
(SAR) Intermec EN 50360, EN 62209-1, EN 602209-2 RF RF (ICNIRP) SAR / SAR 10 g 2.0 W/kg Intermec CN50 (RF) (SAR) GSM900 GSM1800 UMTS2100 802.11b/g Bluetooth 0.026 W/kg ( SAR ) 0.322 W/kg ( SAR ) 0.011 W/kg ( SAR ) 0.081W/kg ( SAR ) 0.188 W/kg ( SAR ) 0.131 W/kg ( SAR ) 0.0026 W/kg ( SAR ) 0.011 W/kg ( SAR ) X X 2446.5 MHz 2483.5 MHz lattention des utilisateurs dans toutes les autres rgions Renseignements importants sur les radiofrquences Intermec Technologies Corporation dclare le CN50 conforme aux exigences essentielles et autres dispositions pertinentes de la Directive R&TTE (1999/5/EC). Ce produit CN50 porte ce logo et utilise des bandes RF qui ne sont pas harmonises travers lUnion Europenne. Taux dAbsorption Spcifique (TAS) Ce produit est conforme aux directives EN 50360, EN 62209-1, et EN 602209-2 sur lexposition aux RF lorsqu'il est utilis avec les accessoires Intermec fournis ou conus pour ce produit. Lutilisation dautres accessoires peut ne pas garantir la conformit aux directives sur lexposition aux RF. Pour les rsidents de lUnion Europenne et des autres pays/rgions qui ont adopt le DAS limite recommand par la Commission internationale de protection contre les rayonnements non ionisants (ICNIRP), cette limite est de 2,0 W/kg pour 10 g de tissu. Rsultats des essais de lexposition et dbit dabsorption spcifique (DAS) de la radiofrquence (RF) pour le modle Intermec CN50:
GSM900 GSM1800 UMTS2100 802,11b/g 0.026 W/kg (valeur DAS maximale vrifie loreille) 0.322 W/kg (valeur DAS maximale vrifie lorsque port sur le corps) 0.011 W/kg (valeur DAS maximale vrifie loreille) 0.081 W/kg (valeur DAS maximale vrifie lorsque port sur le corps) 0.188 W/kg (valeur DAS maximale vrifie loreille) 0.131W/kg (valeur DAS maximale vrifie lorsque port sur le corps) 0.0026 W/kg (valeur DAS maximale vrifie loreille) 0.011 W/kg (valeur DAS maximale vrifie lorsque port sur le corps) Ngligeable et due une alimentation de sortie trs faible. Bluetooth Le tableau suivant rpertorie les zones d'utilisation prvues pour l'quipement et les restrictions connues. Pays dutilisation prvu France Oui Non X License requise Restrictions X Dtails Lopration extrieure de frquence est limite une valeur variant entre 2 446,5 MHz et 2 483,5 MHz. Fr Benutzer in allen anderen Regionen Wichtige Funkwelleninformationen Die Intermec Technologies Corporation erklrt hiermit, dass das Modell CN50 die wesentlichen Anforderungen und anderen relevanten Bestimmungen der R&TTE-Direktive (1999/5/EC) erfllt. Das Produkt CN50 wird mit diesem Logo vertrieben und verwendet Funkfrequenzbnder, die in der Europischen Gemeinschaft nicht harmonisiert sind. Spezifische Absorptionsrate Dieses Produkt erfllt die Expositionsrichtlinien nach EN 50360, EN 62209-1, und EN 602209-2 fr HF-Belastungen, wenn es gemeinsam mit den Intermec-Zubehrteilen verwendet wird, die fr dieses Produkt vorgesehen sind bzw. mit diesem mitgeliefert werden. Der Gebrauch anderer Zubehrteile kann dazu fhren, dass das Gert den diesen Richtlinien fr HF-Belastung nicht mehr entspricht. Fr Bewohner der Europischen Union und anderer Lnder/Regionen, die die SAR-Grenzwerte der internationen, unabhngigen Kommission fr den Schutz vor nichtionisierender Strahlung (ICNIRP) bernommen haben, ist der maximal zulssige SAR-Wert 2,0 W/kg ber 10 g Gewebe. Hochfrequenz (HF)-Expositions- und Spezifische Absorptionsraten (SAR)-Testergebnisse fr das Intermec-Modell CN50:
GSM900 GSM1800 UMTS2100 802.11b/g Bluetooth 0.026 W/kg (am Ohr getesteter maximaler SAR-Wert) 0.322 W/kg (fr krpernahe Nutzung getesteter maximaler SAR-Wert) 0.011 W/kg (am Ohr getesteter maximaler SAR-Wert) 0.081 W/kg (fr krpernahe Nutzung getesteter maximaler SAR-Wert) 0.188 W/kg (am Ohr getesteter maximaler SAR-Wert) 0.131 W/kg (fr krpernahe Nutzung getesteter maximaler SAR-Wert) 0.0026 W/kg (am Ohr getesteter maximaler SAR-Wert) 0.011 W/kg (fr krpernahe Nutzung getesteter maximaler SAR-Wert) Kann aufgrund von sehr niedriger Ausgangsleistung vernachlssigt werden. Die folgende Tabelle fhrt die vorgesehenen Einsatzbereiche der Ausrstung sowie bekannte Einschrnkungen an. Vorgesehen zur Verwendung in diesem Land Frankreich Einschrnkungen X Lizenz obligatorisch Nein Ja X Einzelheiten Frequenzbereich fr Verwendung im Freien eingeschrnkt auf 2446,5 MHz bis 2483,5 MHz. Para usurios de todas as outras regies Informaes importantes sobre rdio A Intermec Technologies Corporation declara que o CN50 est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva R&TTE (1999/5/EC). O produto CN50 identificado por este logotipo e usa faixas de radiofreqncia no harmonizadas em toda a Comunidade Europia. Taxa de absoro especfica Este produto atende s diretrizes de exposio RF EN 50360, EN 62209-1, e EN 602209-2 quando utilizado com os acessrios Intermec fornecidos ou destinados a este produto. O uso de outros acessrios pode resultar em no conformidade com estas diretrizes de exposio RF. Para residentes da Unio Europia e outros pases/regies que adotaram o limite de SAR da Comisso Internacional de Proteo Contra Radiaes No-Ionizantes (ICNIRP), o valor mximo de SAR permitido de 2,0 W/kg sobre 10 g de tecido. Resultados dos testes de exposio radiofrequncia (RF) e taxa especfica de absoro (SAR) do modelo CN50 da Intermec:
GSM900 GSM1800 UMTS2100 802.11b/g Bluetooth 0.026 W/kg (valor mximo de SAR testado no ouvido) 0.322 W/kg (valor mximo de SAR testado para operao quando instalado no corpo) 0.011 W/kg (valor mximo de SAR testado no ouvido) 0.081 W/kg (valor mximo de SAR testado para operao quando instalado no corpo) 0.188 W/kg (valor mximo de SAR testado no ouvido) 0.131 W/kg (valor mximo de SAR testado para operao quando instalado no corpo) 0.0026 W/kg (valor mximo de SAR testado no ouvido) 0.011 W/kg (valor mximo de SAR testado para operao quando instalado no corpo) Desprezvel em virtude de muito baixa potncia de sada. A tabela a seguir identifica as reas s quais o equipamento destina-se para uso e todas as restries conhecidas. Pas destinado para uso Frana Sim No X Licena requerida Restries X Detalhes Freqncia de operao ao ar livre restrita faixa de 2446,5 MHz a 2483,5 MHz. Intermec Technologies Corporation , CN50 R&TTE (1999/5/EC). CN50 ,
, Intermec, EN 50360, EN 62209-1, EN 602209-2 RF .
, SAR,
(ICNIRP), SAR 2,0 /
10 . Intermec CN50 ()
(SAR):
GSM900 0.026 W/kg ( SAR, ) 0.322 W/kg ( SAR, ) 0.011 W/kg ( SAR, ) 0.081 W/kg ( SAR, ) 0.188 W/kg ( SAR, ) 0.131 W/kg ( SAR, ) 0.0026 W/kg ( SAR, ) 0.011 W/kg ( SAR, )
- . Bluetooth
. GSM1800 UMTS2100 802.11b/g X X 2446,5 2483,5 . Para usuarios en todas las otras regiones Informacin importante de radio Intermec Technologies Corporation declara que el CN50 es un dispositivo en cumplimiento con los requisitos esenciales y otras disposiciones relevantes de la Directriz R&TTE (1999/5/EC). El producto CN50 est marcado con este logotipo y utiliza bandas de radiofrecuencia no armonizadas en toda la Comunidad Europea. ndice de absorcin especfico Este producto cumple con las pautas de exposicin de RF EN 50360, EN 62209-1, y EN 62209-2 al utilizarse con los accesorios Intermec suministrados o designados para este producto. El uso de otros accesorios puede no asegurar el cumplimiento con estas pautas de exposicin de RF. Para residentes de la Unin Europea y otros pases/regiones que han adoptado el lmite de SAR de la Comisin Internacional sobre Proteccin Frente a Radiaciones No Ionizantes (International Commission on Non-Ionizing Radiation Protection, ICNIRP), el valor mximo permisible de SAR es de 2.0 W/kg sobre 10 g de tejido. Resultados de pruebas de exposicin de radiofrecuencia (RF) y tasa de absorcin especfica (SAR) para el Modelo CN50 de Intermec:
GSM900 GSM1800 UMTS2100 802.11b/g 0.026 W/kg (valor SAR mximo probado en el odo) 0.322 W/kg (valor mximo SAR probado para operacin usada en el cuerpo) 0.011 W/kg (valor SAR mximo probado en el odo) 0.081 W/kg (valor mximo SAR probado para operacin usada en el cuerpo) 0.188 W/kg (valor SAR mximo probado en el odo) 0.131 W/kg (valor mximo SAR probado para operacin usada en el cuerpo) 0.0026 W/kg (valor SAR mximo probado en el odo) 0.011 W/kg (valor mximo SAR probado para operacin usada en el cuerpo) Insignificante debido a muy baja alimentacin de salida. Bluetooth La tabla siguiente indica las reas de uso a las cuales se destina el equipo y toda restriccin conocida. Pas donde se intenta usar Francia Si X Se requiere licencia No Restricciones X Detalles La operacin de frecuencias en exteriores est restringida entre 2446.5 MHz y 2483.5 MHz. Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com 2009 Intermec Technologies Corporation. All rights reserved. Model CN50 Compliance Insert
*933-175-001*
P/N 933-175-001, Revision A
| 1 2 3 4 5 | Users Manual | Users Manual | 3.38 MiB | August 06 2009 |
CN50 Mobile Computer Users Manual Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. 2009 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(www.openssl.org). This product includes cryptographic software written by Eric Young (EAY@cryptsoft.com). This product uses Regex++, Index software during its operational phases. The owner of Regex++
has granted use of the software to anyone provided such use is accompanied by the following copyright and permission notice:
Regex++, Index. (Version 3.31, 16th Dec 2001) Copyright 1998-2001 Dr John Maddock Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. Dr John Maddock makes no representations about the suitability of this software for any purpose. It is provided as is without express or implied warranty. ii CN50 Mobile Computer Users Manual Contents Contents Before You Begin. vi Safety Information . vi Global Services and Support . vi Warranty Information. vi Web Support . vii Telephone Support . vii Service Location Support . vii Who Should Read This Manual . viii Related Documents . viii Patent Information . ix 1 Using the Computer . 1 Introducing the CN50 Mobile Computer . 2 Using the Battery . 3 Charging the Battery . 3 Removing and Installing the Battery. 4 Maximizing Battery Life . 5 Checking the Battery Status . 6 Using the Keypad . 7 Using the Color-Coded Keys . 8 Capitalizing Characters. 9 Using the Power Button . 10 Entering Letters With the Numeric Keypad. 10 Configuring the Backlight Settings . 10 Adjusting the Volume of the Speaker . 11 Using the Touch Screen . 11 Using the Stylus . 12 Understanding the Screen Icons. 12 Aligning the Touch Screen . 13 Understanding the Status LEDs . 13 Using the Imager. 14 Configuring the Imager . 14 Reading Bar Codes With the Imager . 15 Capturing a Signature . 16 Capturing a Document . 17 CN50 Mobile Computer Users Manual iii Contents Using the Color Camera . 17 Using a microSD Card. 19 Enabling the Integrated GPS on the CN50 . 20 Using the GPSID Installed on the CN50 . 21 Learning About Additional GPS Options for the CN50. 23 2 Connecting and Configuring the CN50 . 25 Connecting the CN50 to a PC . 26 Configuring the CN50 for Your Network. 27 Connecting the CN50 to Your Network . 28 Connecting the CN50 Using 802.11b/g Radio Communications . 28 Connecting the CN50 Using Bluetooth Communications . 29 Connecting the CN50 to a Wireless Printer . 30 Connecting the CN50 Using Ethernet Communications . 31 Connecting the CN50 Using USB Communications . 32 Configuring the Phone . 32 Turning On the Phone Using the Wireless Manager. 32 Activating the CDMA Phone . 33 Activating the UMTS Phone . 35 Making a Phone Call . 36 Connecting to an ISP. 36 Connecting to a Network With a RAS Account . 37 Connecting to a Network with a VPN Server. 38 3 Developing and Installing Applications . 41 Developing Applications for the Computer. 42 Installing Applications on the Computer. 42 Installing Applications Using SmartSystems Foundation. 43 Installing Applications Using Microsoft ActiveSync . 44 Installing Applications Using a microSD Card. 45 Installing Applications Using Wavelink Avalanche . 45 Upgrading the System Software . 46 iv CN50 Mobile Computer Users Manual Upgrading the CN50 Using a microSD Card . 47 Upgrading the CN50 Using SmartSystems Foundation . 48 4 Troubleshooting and Maintaining the CN50. 51 Calling Product Support. 52 Troubleshooting the CN50 . 52 Resetting the CN50 . 57 Warm Booting the CN50 . 57 Cold Booting the CN50 . 58 Clean Booting the CN50. 58 Cleaning the CN50. 59 A Specifications . 61 Physical and Environmental Specifications. 62 Accessories . 64 Default Configuration . 66 B Default Settings . 65 C Keypads and Keystrokes . 73 D Imager Configuration Bar Codes . 79 Standard Characters . 74 Imager Configuration Bar Codes . 80 CN50 Mobile Computer Users Manual v Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions. This section explains how to identify and understand warnings, cautions, and notes that are in this document. A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment. A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Support >
Returns and Repairs > Warranty. vi CN50 Mobile Computer Users Manual Before You Begin Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs. The code is provided as is with all faults. All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose. Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product. Telephone Support In the U.S.A. and Canada, call 1-800-755-5505. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click About Us > Contact Us. Service Location Support For the most current listing of service locations, go to www.intermec.com and click Support >Returns and Repairs >
Repair Locations. For technical support in South Korea, use the after service locations listed below:
AWOO Systems 102-1304 SK Ventium 522 Dangjung-dong Gunpo-si, Gyeonggi-do Korea, South 435-776 Contact: Mr. Sinbum Kang Telephone: +82-31-436-1191 E-mail: mjyun@awoo.co.kr CN50 Mobile Computer Users Manual vii Before You Begin IN Information System PTD LTD 6th Floor Daegu Venture Center Bldg 95 Shinchun 3 Dong Donggu, Daegu City, Korea E-mail: jmyou@idif.co.kr or korlim@gw.idif.co.kr Who Should Read This Manual This manual is for the person who is responsible for installing, configuring, and maintaining the CN50 Mobile Computer. This manual provides you with information about the features of the CN50, including how to install, configure, operate, maintain, and troubleshoot it. Before you work with the CN50, you should be familiar with your network and general networking terms, such as IP address. Related Documents The Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free. To download documents 1 Visit the Intermec web site at www.intermec.com. 2 Click Support > Manuals. 3 In the Select a Product field, choose the product whose documentation you want to download. To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. viii CN50 Mobile Computer Users Manual Patent Information Before You Begin Product is covered by one or more of the following patents:
4953113; 4961043; 4970379; 4988852; 5019699; 5021642; 5038024;
5081343; 5095197; 5144119; 5144121; 5182441; 5187355; 5187356;
5195183; 5216233; 5216550; 5218191; 5227614; 5233172; 5241488;
5243602; 5258606; 5278487; 5288985; 5308966; 5322991; 5331136;
5331580; 5342210; 5349678; 5359185; 5371858; 5373458; 5389770;
5397885; 5410141; 5414251; 5416463; 5442167; 5464972; 5468947;
5468950; 5477044; 5486689; 5488575; 5500516; 5502297; 5504367;
5508599; 5514858; 5530619; 5534684; 5536924; 5539191; 5541419;
5548108; 5550362; 5550364; 5565669; 5567925; 5568645; 5572007;
5576529; 5592512; 5594230; 5598007; 5608578; 5616909; 5619027;
5627360; 5640001; 5657317; 5659431; 5671436; 5672860; 5684290;
5719678; 5729003; 5742041; 5761219; 5764798; 5777308; 5777309;
5777310; 5786583; 5793604; 5798509; 5798513; 5804805; 5805807;
5811776; 5811777; 5818027; 5821523; 5828052; 5831819; 5834749;
5834753; 5837987; 5841121; 5842070; 5844222; 5854478; 5862267;
5869840; 5873070; 5877486; 5878395; 5883492; 5883493; 5886338;
5889386; 5892971; 5895906; 5898162; 5902987; 5902988; 5912452;
5923022; 5936224; 5949056; 5969321; 5969326; 5969328; 5979768;
5986435; 5987192; 5987499; 5992750; 6003775; 6012640; 6016960;
6018597; 6024289; 6034379; 6036093; 6039252; 6064763; 6075340;
6095422; 6097839; 6102289; 6102295; 6109528; 6119941; 6128414;
6138915; 6149061; 6149063; 6152370; 6155490; 6158661; 6164542;
6164545; 6173893; 6195053; 6234393; 6234395; 6244512; 6249008;
6328214; 6330975; 6345765; 6356949; 6367699; 6375075; 6375076;
6375344; 6431451; 6435411; 6484944; 6488209; 6497368; 6532152;
6538413; 6539422; 6621942; 6641046; 6681994; 6687403; 6688523;
6732930; 6859190; 6889903; 6967280; 7027037; 7035466; 7090137;
7121467. There may be other U.S. and foreign patents pending. CN50 Mobile Computer Users Manual ix Before You Begin x CN50 Mobile Computer Users Manual 1 Using the Computer Introducing the CN50 Mobile Computer This chapter introduces the CN50 Mobile Computer with Windows Mobile 6.1 and contains these topics:
Using the Battery Using the Keypad Adjusting the Volume of the Speaker Using the Touch Screen Understanding the Status LEDs Using the Imager Using the Color Camera Using a microSD Card Enabling the Integrated GPS on the CN50 1 Chapter 1 Using the Computer Introducing the CN50 Mobile Computer The Intermec CN50 Mobile Computer is a small, sleek, and stylish mobile computer built on the Microsoft Windows Mobile 6.1 operating system. The CN50 uses dual ARM processors to provide high throughput and is the only mobile computer with the latest High Speed Uplink Packet Access (HSUPA). The CN50 is also the only mobile computer that can be reprovisioned from a CDMA to a GSM/
UMTS network. CN50 Mobile Computer Here are more great features of the CN50:
A digital compass to enhance GPS navigation and improve geotagging of captured images. An accelerometer that can automatically rotate the display between portrait, landscape and upside-down viewing. The highest quality color camera in a mobile computer. An area imager that supports reading bar codes, signature capture, and Enhanced Mobile Document Imaging (eMDI). The CN50 Mobile Computer with an IEEE 802.11b/g radio installed is Wi-Fi certified for interoperability with other 802.11b/g wireless LAN devices. 2 CN50 Mobile Computer Users Manual Chapter 1 Using the Computer Use this manual to understand how to use the CN50 and other features and options available on it. For information about Windows Mobile 6.1 applications installed on the CN50, refer to the online help. Using the Battery The CN50 uses an AB24 standard or AB25 extended battery as its main power source. The standard battery has a 7.2 Watt hour capacity, and the extended battery has a 14.4 Watt hour capacity. Several factors determine the life of your battery, such as extreme temperatures, input devices, and your usage. You must fully charge the battery before you can use the CN50. When you change the battery, an internal super capacitor maintains your status, memory, and real-time clock for approximately 5 minutes. The battery used in this device may present a fire or chemical burn hazard if it is mistreated. Do not disassemble it, heat it above 100C (212F) or incinerate it. Dispose of used batteries promptly. Keep away from children. If you fail to replace the low battery immediately, you may lose important data or applications. Note: If the CN50 is not using external power and you remove the battery pack, the CN50 goes into Suspend mode. For replacement batteries, contact your Intermec representative. Charging the Battery Make sure you fully charge the AB24 or AB25 battery before you use your CN50. You can charge the battery before or after you install it in the CN50. A fully discharged battery charges in approximately 4
(AB24) to 6 (AB25) hours. To charge the battery Insert up to four batteries into the AC21 quad battery charger. CN50 Mobile Computer Users Manual 3 Chapter 1 Using the Computer Install the battery in the CN50 and insert the CN50 into the AD23 charge-only multidock or AD24 Ethernet multidock. Attach an AE37 AC adapter or AE36 vehicle battery adapter. Use the next table to understand how long it takes to charge your batteries in each of the CN50 charger or dock accessories. Charging Times for CN50 Batteries CN50 Charging Accessory AC21 quad battery charger AD23 charge-only multidock AD24 Ethernet multidock AE36 Vehicle battery adapter AE37 AC adapter AB24 Charging Time AB25 Charging Time 4 hours 4 hours 4 hours 4 hours 4 hours 6 hours 6 hours 6 hours 6 hours 6 hours Removing and Installing the Battery To maximize the time allowed to replace the main battery pack, put the CN50 in suspend mode before removing the battery pack. To remove and install the battery 1 Press and hold for about 2 seconds. When you release , the CN50 goes into suspend mode. 2 If necessary, disconnect the handstrap from the top of the CN50. 4 CN50 Mobile Computer Users Manual Chapter 1 Using the Computer 3 Push forward on the battery release tab until the battery releases, and then lift it away from the CN50. 4 Insert a fully charged battery into the CN50, and press down on the battery until it clicks into place. 5 If necessary, replace the handstrap. Maximizing Battery Life Batteries are chemical devices. If the batteries are left sitting on a shelf for long periods of time outside the CN50, the batteries slowly discharge, eventually to zero if left uncharged. The battery chemistry resists normal degradation if you store the battery in a charger as opposed to leaving the battery in a discharged state. See the following table for tips to maximize the life of your battery. Battery Conservation Tips When You Want To:
Operate the CN50 and the Low Battery status icon appears or the Battery light comes on. Stop using the CN50 for 5 minutes or longer. Do This to Save Battery Power:
Press to turn off the CN50. Remove the battery and insert another fully charged battery within 5 minutes or you may lose data. Or, you can connect the CN50 to an external power source. Make sure the low battery icon is not on the screen and that the Battery light is not turned on. Press to turn off the CN50. CN50 Mobile Computer Users Manual 5 Chapter 1 Using the Computer Battery Conservation Tips (continued) When You Want To:
Store the CN50 for more than a day. Store the battery outside the CN50. Checking the Battery Status Do This to Save Battery Power:
If you are storing the CN50 for a few days, like over the weekend, install the charged battery or attach the CN50 to a power source. If you are storing the CN50 for longer, remove and charge the battery, then store both the battery and the CN50 in a cool location. If the battery in storage is not used in several months, you should recharge the battery to keep it at its performance peak. Store the batteries in a charger. The easiest way to check the status of your battery is to look at the battery icon on the status bar of your CN50. Battery Icon Status Icon Status Battery is fully charged. Battery has a medium charge. You should be able to work for several more hours before changing batteries. Battery is low. You need to replace the battery soon. Battery is critically low. You need to replace the battery now. Battery is charging. 6 CN50 Mobile Computer Users Manual Chapter 1 Using the Computer The Battery Status LED below your CN50 display indicates the charging status of your battery. Understanding the Battery Status LED LED State Steady green when the CN50 is connected to external power Blinking red Steady red when the CN50 is connected to external power Steady red when the CN50 is not connected to external power Steady amber Off Description The battery is more than 97% charged. The battery is low. CN50 goes into Suspend mode. Charge or replace the battery. The battery is charging. The software is not working properly. The battery is missing or is unable to charge because the temperature is outside of the charging range. The CN50 is not on external power and the battery is operating normally. Using the Keypad Use the following sections to understand how to use the keypad. For information on remapping the keypad, you can download the Device IDL Resource Kit from the Intermec web site at www.intermec.com/
idl. The CN50 comes with a numeric keypad or a QWERTY keypad. The QWERTY keypad is designed for applications that require primary input of alphabetic data. This keypad also provides special characters, numbers, symbols, and functions by pressing color-coded key sequences. The numeric keypad is for applications that require mainly numeric data. This keypad also lets you enter special characters, including the alphabet, by pressing color-coded key sequences. CN50 Mobile Computer Users Manual 7 Chapter 1 Using the Computer 1 4 7 2 5 8 0 CN50 Numeric Keypad 3 6 9 Esc Enter A EWQ
D X
S Z
R
F
C
T G V 1 Y 4 H 7 B 2 U 5 J 3 I 6 K 9 8 N M O L P Esc sym Space 0 Enter CN50 QWERTY Keypad Using the Color-Coded Keys Each keypad provides color-coded keys to let you access additional characters, symbols, and functions printed on the keypad overlay. Once you understand how to use the color-coded keys and key sequences, you can access all of the additional features printed on the keypad overlay. 8 CN50 Mobile Computer Users Manual Chapter 1 Using the Computer There are two color-coded modifier keys on the numeric keypad: the orange [ key and the green key. There is one orange [ color-coded modifier key on the QWERTY keypad. Using the Color-Coded Keys You Want to:
Use an orange character or function printed above a key. Use a green character or function printed above a key. Lock the orange or green key to stay on. Press:
[ key (LED turns on) and then the key with the character or function printed above it
(LED turns off).
] key (LED turns on) and then the key with the character or function printed above it (LED turns off).
[ or ] once. Unlock the green or orange key. [ or ] once. Capitalizing Characters Example On the CN50 QWERTY keypad, press [ and then O to select the ! key. On the CN50 numeric keypad, press ] and then #
to select the o function. On the CN50 numeric keypad, press ] once. The green LED turns on and stays on. Press or once to unlock the key. The LED turns off. You can capitalize characters individually, or you can type all capital letters by enabling Caps Lock. To capitalize a single character On the QWERTY keypad, press the [ key, and then the A key to select the Shift function. Press the [ key, and the character. On the numeric keypad, press the key, and then the 1 key. Select the key with the letter you want to capitalize. Press 1 again to return to lowercase letters. To enable Caps Lock On the QWERTY keypad, press [, then the up arrow key. Press [
again to disable the Caps Lock. On the numeric keypad, press ] 1. CN50 Mobile Computer Users Manual 9 Chapter 1 Using the Computer To disable Caps Lock On the QWERTY keypad, press the [ key again. On the numeric keypad, press 1 again. For information on how to enter specific characters with keystrokes, see Appendix C, Keypads and Keystrokes on page 73. Using the Power Button When you press the Power button (^), you put the CN50 into suspend mode. In this lower power mode, the CN50 continues to supply power to all memory, but turns off power to most hardware such as the display. This power-saving feature is designed to prolong battery life. Entering Letters With the Numeric Keypad To enter letters on the numeric keypad, you need to press the ] key and the number key as many times as necessary to access the letter you need since each number key has one to four letters or functions. For example, to type a lowercase z Press ]9999. Configuring the Backlight Settings By default, the CN50 goes into Screen Off mode when there is no activity on the computer. Screen Off mode turns off the backlight and display. Press a key or tap the screen to resume activity. To configure the backlight 1 Tap Start > Settings > the System tab > the Backlight icon > the Battery Power tab. 2 With Turn off backlight if device is not used for checked, select the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes). 10 CN50 Mobile Computer Users Manual Adjusting the Volume of the Speaker Chapter 1 Using the Computer You can adjust the computer volume for your needs and your environment. The volume includes sounds you hear when you tap the screen or scan bar codes with a scanner. You can set the volume to off, very low, low, medium, high, and very high (default). To adjust the volume of the speaker with the Volume icon 1 Tap the Volume (
2 Use your stylus to adjust the volume slider.
) icon at the top of the screen. Using the Touch Screen The CN50 has a 240 x 320 pixel color touch screen display. The Windows Mobile 6.1 start screen has three distinct areas: the navigation bar, today screen, and command bar. Navigation bar Today screen Command bar Windows Mobile 6.1 Start Screen CN50 Mobile Computer Users Manual 11 Chapter 1 Using the Computer Using the Stylus Your computer has a stylus for selecting items and entering information on the touch screen. Functions You Can Perform With the Stylus Action Tap Drag Tap and hold Description Touch the screen once with the stylus to select options, open or close applications, or launch menus from the Command bar. Hold the stylus on the screen and drag across the screen to select text and images. Tap and hold the stylus on an item to see a menu of actions available for that item. On the pop-up menu that appears, tap the action you want to perform. Understanding the Screen Icons Use the screen icons on the navigation bar and the command bar to see the network connection status and other system information. For information about the battery icons, see Checking the Battery Status on page 6. Some standard Microsoft icons are included in this table. Screen Icons Icon Description The volume is turned off. To turn the volume back on, tap this icon and choose your setting. The computer is connected to the network. The computer is not connected to the network. The 802.11b/g radio is connected to the wireless network. 12 CN50 Mobile Computer Users Manual Aligning the Touch Screen Chapter 1 Using the Computer If the touch screen does not respond when you tap it with the stylus, you may need to calibrate the screen. To calibrate the touch screen 1 Tap Start > Settings > the Systems tab > Screen. Note: If the touch screen is so out of alignment that you cannot open the Start menu, you can try to align the screen menu using the keypad. For help, see the next procedure. 2 Tap Align Screen and follow the instructions to align the screen. 3 Click ok. If you are unable to align the touch screen, you may need to cold boot the CN50. For help, see Cold Booting the CN50 on page 58. Understanding the Status LEDs The CN50 has three status LEDs. Notication LED Good Read LED Key status LED Status LEDs CN50 Mobile Computer Users Manual 13 Chapter 1 Using the Computer The next table describes the notification LED, good read LED, and key status LED. For information about the battery status LED, see Understanding the Battery Status LED on page 7. Understanding the Status LEDs LED Notification Good Read Key Status Color Orange Green Green Amber Description The CN50 is notifying you of a pending alarm or message. The CN50 has successfully decoded a bar code. Caps Lock is enabled if you have a QWERTY keypad. Green function keys are enabled if you have a numeric keypad. Orange function keys are enabled. Using the Imager The CN50 contains an internal imager that enables you to do much more than read bar codes. You can also use the imager to perform signature capture and document capture as part of your business application. The next few sections explain how to configure and use the imager and provide information on using signature capture and document capture. Configuring the Imager The CN50 ships with an internal imager to read and enter bar code data. By default, these bar code symbologies are enabled on the CN50:
Code 39 Code 128/GS1-128 DataMatrix PDF417 EAN/UPC 14 CN50 Mobile Computer Users Manual Chapter 1 Using the Computer If you are using bar code labels that are encoded in a different symbology, you need to enable the symbology on the CN50. To easily enable or disable symbologies, read one of the bar codes in the table called Symbology Bar Codes on page 81. You can use EasySet to create configuration bar codes specific to your system. You can download a free copy of EasySet from the CN50 page on the Intemec web site at www.intermec.com. To develop an application you can use to configure the imager, use the Data Collection Resource Kit. The resource kit is part of the Intermec Developer Library (IDL) and can be downloaded from the Intermec web site at www.intermec.com/idl. Use the next section to understand how to read a bar code with the imager. Reading Bar Codes With the Imager Your CN50 comes with an area imager. The area imager is equipped with a laser pointer to help you aim at bar codes, allow you to read 2D bar code symbologies, and support omni-directional (360) scanning. Omni-directional scanning lets you position the CN50 in any orientation to read a bar code label. To read a bar code 1 Press ^ to turn on the CN50. 2 Point the scanner window at the bar code label, and hold the CN50 steady a few inches from the label. 3 Press the Scan button. The laser pointer and illumination beam and frame appear. CN50 Mobile Computer Users Manual 15 Chapter 1 Using the Computer 4 Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the illumination frame covers the bar code you are trying to decode. When the CN50 successfully reads a bar code label, you hear a high beep, and the Good Read LED turns on briefly. 5 Release the Scan button. Capturing a Signature Signature capture is a process in which the imager in the Intermec computer takes a picture of a specified area, usually the signature line on a receipt or other printed form. The capture area is usually defined in relation to the location of a nearby bar code. The capture process produces an image file (either .bmp or .jpg format) which you can use in your back-office operations. For example, you could shorten order processing time by sending order confirmations wirelessly back to the office. For more information on using signature capture, download the Data Collection Resource Kit which is part of the Intermec Developer Library (IDL), from the Intermec web site at www.intermec.com/idl. 16 CN50 Mobile Computer Users Manual Capturing a Document Chapter 1 Using the Computer Intermec Enhanced Mobile Document Imaging (eMDI) is an image capture application that enables users to capture document images while in the field. Using the imager on your CN50, eMDI allows you to convert paper documents into document images that are saved on your mobile computer. eMDI streamlines back-office operation and reduces data entry time because document images can be transmitted from the field to backoffice applications over wireless networks. With this, customer service and other staff gain real-time access to document images, via their enterprise systems, which can be used to answer customer queries, issue invoices, and update records. You can download a demo version of eMDI from the CN50 page on the Intermec web site at www.intermec.com. To get the full version of eMDI, you need to purchase the eMDI Client Software License
(P/N 454-025-001). For more information, contact your local Intermec representative Using the Color Camera The high quality color camera with flash is a standard feature of the CN50. You can take photos in high, normal, or low quality, with image sizes up to 640x480 pixels. When you take a picture, the images are saved as .img files and stored in the /My Documents/My Pictures folder. Camera CN50 Color Camera CN50 Mobile Computer Users Manual 17 Chapter 1 Using the Computer You can use the Pictures & Videos application on the CN50 to take, view, and edit pictures or record and launch video clips stored on the CN50 or a storage card. You can also send pictures and video clips to others or save an image as the background on the Today screen. After you have opened up the camera, you can configure camera options by tapping Menu > Options. To take a picture with the camera 1 Tap Start > Programs > Pictures & Videos. 2 Tap the Camera icon in the grid, or tap Camera in the taskbar. 3 Using the screen as a viewfinder, move the camera until you have the image you want to capture. 4 Press Enter to save the image. If you select to save your pictures to Main memory, they are saved to permanent storage on the CN50. To set options for saving pictures 1 From the Pictures & Videos application, tap Menu > Options. 2 Set these options:
(Optional) A filename prefix. The default filename prefix is
.img. Where you want to save picture files 18 CN50 Mobile Computer Users Manual Chapter 1 Using the Computer The compression level. 3 Click ok. Using a microSD Card You can use a micro Secure Digital (SD) card to increase file storage and install software. The CN50 supports an optional 32 GB maximum capacity microSD. The microSD card slot is located in the battery compartment. To install a microSD card 1 Remove the battery. For help, see Removing and Installing the Battery on page 4. 2 Swing the card access door clockwise to expose the SIM card and microSD card slots. 3 Insert the microSD card in the bottom slot and push in until it clicks into place. 4 Install the battery. 5 Press to turn on the CN50:
You should be able to navigate to the SDMMC Disk folder and see the contents of the microSD card. CN50 Mobile Computer Users Manual 19 Chapter 1 Using the Computer If the microSD card is bootable, your CN50 boots from the card. If the microSD card contains operating system upgrade files, the upgrade process automatically starts. For more information, see Upgrading the System Software on page 46. For troubleshooting information, see Troubleshooting the CN50 on page 52. Enabling the Integrated GPS on the CN50 The CN50 comes equipped with an integrated Global Positioning System (GPS) receiver, it can deliver standards-based National Marine Electronics Association (NMEA) data strings to GPS applications. Intermec recommends that you use the GPS Intermediate Driver
(GPSID) instead of directly accessing the GPS hardware. The GPSID is a Microsoft software component that interacts between applications and the GPS hardware. Using the GPSID allows Intermec support for Extended Ephemeris, which enhances GPS performance by:
reducing the amount of time it takes your GPS receiver to acquire a fix. eliminating the need to obtain precise satellite data information from the GPS satellites. And, as a Microsoft software component, the GPSID also provides these benefits:
Allows multiple applications to simultaneously access the GPS data stream. Provides access to GPS data without requiring applications to recognize and parse NMEA syntax. 20 CN50 Mobile Computer Users Manual Using the GPSID Installed on the CN50 Chapter 1 Using the Computer To use the GPSID installed on your CN50, you need to configure the GPSID settings. To configure your GPSID settings 1 Tap Start > Settings > the System tab. 2 Tap External GPS. The GPS Settings screen appears. 3 On the Programs tab, select the COM port that you want your programs to use to get GPS data from your CN50. Note: COM1 and COM3 are reserved. 4 Tap the Hardware tab, and select these settings. GPS hardware port: COM3 Baud rate:
57600 CN50 Mobile Computer Users Manual 21 Chapter 1 Using the Computer 5 Tap the Access tab and select the Manage GPS automatically check box. 6 Tap ok. 22 CN50 Mobile Computer Users Manual Learning About Additional GPS Options for the CN50 Chapter 1 Using the Computer Intermec provides enhanced feature support for the Extended Ephemeris data capability. For the latest Extended Ephemeris data files and other CN50 downloads, visit the CN50 downloads page on the Intermec web site at www.intermec.com. For more information about programming for Extended Ephemeris GPS, visit the Intermec Developer Library at www.intermec.com/idl. CN50 Mobile Computer Users Manual 23 Chapter 1 Using the Computer 24 CN50 Mobile Computer Users Manual 2 Connecting and Configuring the CN50 Use this chapter to understand how to configure the CN50 to communicate in your network. This chapter contains these topics:
Connecting the CN50 to a PC Configuring the CN50 for Your Network Connecting the CN50 to Your Network Configuring the Phone Connecting to an ISP Connecting to a Network With a RAS Account Connecting to a Network with a VPN Server 25 Chapter 2 Connecting and Configuring the CN50 Connecting the CN50 to a PC You can use Microsoft ActiveSync to establish a connection between your CN50 and PC. ActiveSync lets you transfer files, synchronize files, remotely debug, and perform other device management activities. ActiveSync is a free application available from the Microsoft web site. To establish an ActiveSync partnership between your CN50 and PC, you need to physically connect your CN50 to your PC using these accessories:
CN50 AC adapter USB to mini-USB cable To establish an ActiveSync partnership 1 Download ActiveSync from the Microsoft Windows Mobile CD and install ActiveSync on your PC. When installation is complete, the Get Connected dialog box appears. 26 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 2 Follow the onscreen instructions to establish a partnership. When the partnership is established, the Microsoft ActiveSync screen appears on your PC. Configuring the CN50 for Your Network You have several options for configuring the CN50 to connect to your network:
You can use the Scan-to-Connect utility, which is part of SmartSystems Foundation, to quickly provide the CN50 with the minimal information necessary to connect to a secure network. You can download SmartSystems Foundation and the Scan-to-
Connect utility from www.intermec.com/SmartSystems. You can connect the CN50 to your PC using an ActiveSync connection and download the SOTI client. You can use the SOTI client to manage your CN50s with the MobiControl software application for device management and remote control. You can download a trial version of MobiControl from the Intermec web site. From www.intermec.com, select Products > Applications and Software > Device and Data Management. CN50 Mobile Computer Users Manual 27 Chapter 2 Connecting and Configuring the CN50 You can use Microsoft APIs and Development Tools for Windows Mobile 6. These tools are available from the Microsoft Developers Network web site at http://msdn.microsoft.com/en-us/
default.aspx. Connecting the CN50 to Your Network 802.11b/g radio communications. The CN50 is a versatile mobile computer that you can easily add to your wireless or wired data collection network. You can connect your CN50 using:
Bluetooth communications. Ethernet communications USB communications. Connecting the CN50 Using 802.11b/g Radio Communications Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage. Your CN50 has an 802.11b/g radio to transfer data using wireless communications. This section assumes that your wireless network is set up, including your access points. To configure 802.11b/g radio parameters 1 Tap Start > Settings > the Connections tab. 2 Tap Wi-Fi. The Configure Wireless Network page appears. 3 In the Network Name field, type in the name of your network and then tap Next. The Configure Network Authentication page appears. 4 From the Authentication list, choose either Open, Shared, WPA, WPA-PSK, WPA2, or WPA-PSK. If you choose Open or Shared, Data Encryption is automatically set to WEP and the key is automatically provided. 28 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 If you choose WPA or WPA2, Data Encryption is automatically set to TKIP. If you choose WPA-PSK or WPA2-PSK, Data Encryption is automatically set to TKIP and you need to enter a Network key. 5 Tap Next. 6 For EAP type, select PEAP from the list and tap Finish. You return to the Configure Wireless Networks page. 7 Tap Connect. The CN50 prompts you to enter this network information:
User name Password 8 Tap OK. You device will connect to the network. 9 Make sure that your CN50 is talking to the network and that the network can see your CN50. Connecting the CN50 Using Bluetooth Communications You CN50 is Bluetooth-enabled, which lets you connect to other Bluetooth devices, such as printers. You need to turn on the Bluetooth radio before you can discover and connect to other Bluetooth devices. By default, the radio is turned off. To turn on the Bluetooth radio 1 Tap Start > Settings > the Connections tab > Bluetooth > the Mode tab. 2 Tap Turn on Bluetooth. CN50 Mobile Computer Users Manual 29 Chapter 2 Connecting and Configuring the CN50 3 (Optional) If you want your CN50 to be visible to other Bluetooth devices, tap Make this device visible to other devices. 4 Click ok. The Bluetooth radio maintains its current state through a warm or cold boot and maintains virtual COM ports. But, if you clean boot your CN50, you need to recreate pairings to devices. Connecting the CN50 to a Wireless Printer To configure your CN50 for Bluetooth wireless printing, you need to:
make sure Bluetooth power is on. For help, see the procedure in Connecting the CN50 Using Bluetooth Communications on page 29. create an application that opens the wireless printing COM port on your CN50. For help, see the Bluetooth Resource Kit, which is part of the Intermec Developer Library (IDL), available from the Intermec web site at www.intermec.com/idl. select the current wireless printer on the CN50. For help, see the next procedure. 30 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 To select the current wireless printer 1 Select Start > Settings > the System tab > Wireless Printing. 2 Tap Search to find a printer, or tap Manual to enter a device address. Follow the onscreen instructions to select the current wireless printer. 3 (Optional) Tap Print Test Page. The printer prints out the test page. Note: You can also print wirelessly using Microsoft APIs with Bluetooth extensions for Winsock and Bluetooth virtual COM ports. For help, see the IDL, available from the Intermec web site at www.intermec.com/idl. Connecting the CN50 Using Ethernet Communications You connect your CN50 to your Ethernet network with an ethernet cable and an AD24 ethernet multidock. To use your CN50 in an Ethernet network 1 Connect your CN50 to an ethernet network with an AD24. Ethernet communications is automatically enabled on your CN50. 2 Make sure that your CN50 is communicating with the network and that the network can see your CN50. CN50 Mobile Computer Users Manual 31 Chapter 2 Connecting and Configuring the CN50 Connecting the CN50 Using USB Communications You can use the CN50 AC adapter to transmit data to and receive data from another device through USB communications. For more information about this accessory and how to order it, see Accessories on page 90. Configuring the Phone The CN50 supports two types of cellular phone technology:
CDMA UMTS With a radio module installed in the CN50, you can send and receive telephone calls as well as transmit data through wide-area (WAN) cellular networks. The CN50 provides a phone speaker, microphone, and speakerphone. It also supports the use of a Bluetooth headset or hands-free kit. The factory default setting for the phone is disabled. After you have turned on the phone and activated it, you can customize the features of the phone and network settings. For help, refer to the online help on your CN50. Turning On the Phone Using the Wireless Manager You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi, and the phone on your CN50. To turn on the phone using the wireless manager 1 Tap Start > Settings > the Connections tab > Wireless Manager. 32 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 2 In the Wireless Manager, tap Phone. The phone turns on. 3 Tap Menu > Phone Settings to configure the phone. For help, see the next procedure, Activating the CDMA Phone. 4 Tap Done to close the Wireless Manager. Activating the CDMA Phone The CDMA WAN radio module is installed at the factory. To activate your CDMA CN50 device, you need to contact the carrier you have chosen and set up accounts for each device. Use the following table to view the carriers that Intermec currently supports. If your carrier is not listed in the table, please contact Intermec product support to see if it is now supported. Currently Supported Carriers Country United States Canada Carriers Alltel, Sprint, Verizon Bell Mobility, Telus The carrier will require the Electronic Serial Number (ESN) to start the activation process. You can find the ESN:
CN50 Mobile Computer Users Manual 33 Chapter 2 Connecting and Configuring the CN50 on a label located in the upper right corner of the battery compartment. on the outside of the CN50 shipping box. The activation process is slightly different for each CDMA carrier. Your carrier sales contact and an Interme representative can guide you through the process. After you supply the ESN to your carrier, they will respond with values that you must enter using the Windows Mobile Activation Wizard (if required). Some of the supported carriers do not require you to enter any values. The following table shows the carriers, the correct activation method to use, and the values that you need to activate your phone. Values Required for CDMA Phone Activation Carrier Alltel Bell Mobility Sprint Activation Method Activation Values You Need Dial *22899 None - all parameters are automatically transferred wirelessly. The Activation Wizard is disabled for Alltel. Activation Wizard Service Programming Code (SPC), also called the activation code. Mobile Directory Number (MDN) Mobile Station Identification Number (MSIN) System ID (SID) Network ID (NID) Mobile Country Code (MCC) Mobile Network Code (MNC) Username Password called the activation code MDN Mobile Station Identifier (MSID) None - all parameters are automatically transferred wirelessly. Activation Wizard Master Subsidy Lock (MSL), also Telus Dial *22803 34 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 Values Required for CDMA Phone Activation (continued) Carrier Verizon Activation Method Activation Values You Need Dial *22899 None - all parameters are automatically transferred wirelessly. You can also use the Activation Wizard with Verizon. After you complete the activation process, the settings you enter are permanently stored in the CDMA module. Changing the OS or SSPB loads will not affect any of the settings or activation parameters stored in the WAN modem. To start the Activation Wizard 1 Tap Start > Phone from the Today screen. 2 In the Phone application, tap Menu > Activation Wizard from the bottom of the screen. Activating the UMTS Phone You use a SIM card to activate the UMTS/HSPA phone on the CN50. You can purchase the SIM card from your network provider. You insert the SIM card in the battery cavity on the back of the CN50. For more information, please contact your local Intermec representative. To install the SIM card 1 Disconnect the handstrap from the top of the CN50. 2 Push forward on the battery release tab until the battery releases, and then lift the battery away from the CN50. 3 Swing the card access door clockwise to expose the SIM card and microSD card slots. 4 Insert the SIM card into the top slot until it clicks in place. 5 Close the card access door. 6 Insert the battery and press down until it clicks in place. Reconnect the handstrap. 7 Press ^ to turn on the CN50. CN50 Mobile Computer Users Manual 35 Chapter 2 Connecting and Configuring the CN50 Making a Phone Call After you activate your phone, you are ready to start making phone calls. To make a phone call 1 Tap Start > Phone. 2 Tap the keys to enter the telephone number you want to call. 3 Tap the Talk button. Connecting to an ISP You can connect to your Internet Service Provider (ISP), and use the connection to send and receive e-mail messages and view web pages. Get an ISP dial-up access telephone number, a user name, and a password from your ISP. Tap the Help icon at any time to view additional information for the wizard or the settings. To connect to an Internet service provider 1 Tap Start > Settings > Connections tab > Connections. 2 Under My ISP, tap Add a new modem connection. 3 Enter a name for the connection, such as ISP Connection. 36 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 4 If using an external modem connected to your CN50 with a cable, select Hayes Compatible on COM1 from the Select a modem drop-down list. 5 Tap Next. 6 Enter the access phone number and then tap Next. 7 Enter the User name, Password, and Domain (if provided by an ISP or your network administrator). 8 Tap Finish. 9 Tap the Advanced tab from the Connections screen and then tap Dialing Rules. 10 Select Use dialing rules, tap ok at the dialog box, and then tap Edit. 11 Specify your current phone type and then tap ok until you exit and return to the Settings page. Once the CN50 is connected, you can:
send and receive message by using Messaging (Outlook E-mail). visit web pages by using Internet Explorer Mobile. Connecting to a Network With a RAS Account If you have access to a network at work, you can send e-mail messages, view intranet pages, synchronize your CN50, and possibly access the Internet. Create a modem connection through a RAS (Remote Access Server) account. Before you can create this modem connection, your network administrator needs to set up a RAS account for you. Your network administrator may also give you Virtual Private Network
(VPN) settings. Tap the Help icon at any time to view additional information for the wizard or the settings. To connect to a private network 1 Tap Start > Settings > Connections. 2 Under My Work Network, tap Add a new modem connection. 3 Enter a name for the connection, such as Company Connection. CN50 Mobile Computer Users Manual 37 Chapter 2 Connecting and Configuring the CN50 4 Select your modem type. If using an external modem connected to your CN50 with a cable, select Hayes Compatible on COM1 from the Select a modem drop-down list. If using any type of external modem, select the modem by name. If a listing does not exist for your modem, select Hayes Compatible on COM1. 5 Tap Next. 6 Enter the access phone number and then tap Next. Use these guidelines when entering a phone number:
Enter the phone number exactly as you want it dialed. For example, if you call from a business complex or hotel that requires a nine before dialing out, enter 9 in front of the phone number. Enter the access point name (APN) provided by your mobile phone service provider. If you want to use dialing rules, see the online help for information. 7 Enter the User name, Password, and Domain (if provided by an ISP or your network administrator). 8 Tap Finish. Connecting to a Network with a VPN Server A VPN connection helps you to securely connect to servers, such as a corporate network, through the Internet. Before you can make a VPN connection, you will need the following items from your network administrator:
User name Password Domain name TCP/IP settings Host name or IP address of the VPN server 38 CN50 Mobile Computer Users Manual Chapter 2 Connecting and Configuring the CN50 To create a VPN server connection to work 1 Tap Start > Settings > Connections. 2 Under My Work Network, tap Add a new VPN server connection. 3 In the Name field, enter a name for the connection, such as your company name. 4 In the Host name / IP field, enter the VPN server name or IP address. 5 Select the VPN type of authentication to use with your CN50. If you are not sure which option to choose, check with your network administrator. 6 Tap Next. 7 Select a way for the CN50 to authenticate the connection. If you select A pre-shared key, enter the key provided by your network administrator. 8 Click Next. 9 Enter the User name, Password, and Domain (if provided by an ISP or your network administrator). 10 Tap Finish. CN50 Mobile Computer Users Manual 39 Chapter 2 Connecting and Configuring the CN50 11 Insert the necessary equipment, such as a network card, into the CN50 and begin connecting. 40 CN50 Mobile Computer Users Manual 3 Developing and Installing Applications Use this chapter to understand the guidelines for developing applications for use on the CN50. This chapter contains these sections:
Developing Applications for the Computer Upgrading the System Software Installing Applications on the Computer 41 Chapter 3 Developing and Installing Applications Developing Applications for the Computer Use the Intermec Resource Kits to develop new applications to run on the CN50. The Resource Kits are a library of components grouped by functionality that you can use to create applications for the computer. The Resource Kits are part of the Intermec Developer Library (IDL), and can be downloaded from the Intermec web site at www.intermec.com/idl. For more information, see the Intermec Developer Library Resource Kit Developers Guide (P/N 934-006-xxx). Installing Applications on the Computer There are several ways you can install applications on your mobile computer:
You can package your application as a cabinet (.cab) file. If you have a simple application, you may only need to deliver the
.exe file. You can copy a directory structure that contains the application, supporting files, DLLs, images, and data files. Intermec recommends using .cab files to install your applications. The mobile computer uses standard Windows Mobile .cab files and will install third-party .cab files. You can have your .cab files place your application in any of these memory locations on the mobile computer:
The Object Store or the Flash File Store. The Object Store is a DiskOnChip flash that looks like a disk. The Flash File Store is an area of storage which is embedded in a section of the system flash memory. This storage is not erased during a reset, although it might be erased during the reflashing process. In addition to storing applications and data files, you have the option to store persistent registry information to the Flash File Store region. The optional microSD card. If you are using a microSD card, this should be the primary location to place application installation files. The microSD card creates the Storage Card folder on the CN50. 42 CN50 Mobile Computer Users Manual Chapter 3 Developing and Installing Applications The non-volatile Flash File Store region of the storage. Use the small non-volatile Flash File Store region to hold .cab files that rebuild the system at clean boot or install applications from a .cab file into the Flash File Store so that they are ready-to-run when you perform a clean boot. Since the flash in the system has a limited number of write cycles, do not use the Flash File Store for excessive writing. Files copied to any of these locations are safe when you cold boot the computer as long as the AutoRun system is installed in the appropriate location. You can find information about this system in the Intermec Developers Library (IDL) Resource Kit Developers Guide which is available from www.intermec.com/idl. When you copy a
.cab file to the \CabFiles folder, the folder automatically extracts that
.cab file on every cold boot. There are several ways you can install files and applications on the computer:
SmartSystems console ActiveSync microSD card Wavelink Avalanche The following sections explain how to use each one of these processes to install your application on the computer. Installing Applications Using SmartSystems Foundation Your CN50 is SmartSystems-enabled, which lets you use the SmartSystems console to install Intermec applications on your CN50. The console is part of SmartSystems Foundation. For more information, go to the Intermec web site at www.intermec.com/
SmartSystems. To install an application using the SmartSystems console 1 Download the application to your PC. 2 Double-click the application. The application appears in the SmartSystems console in the Software Vault. 3 Drag the application to each CN50 in your network or to a group of CN50 in a folder. CN50 Mobile Computer Users Manual 43 Chapter 3 Developing and Installing Applications Installing Applications Using Microsoft ActiveSync You can send applications from your PC to your CN50 using Microsoft ActiveSync. To install an application using Microsoft ActiveSync 1 On your PC, copy the .cab file you want to download to your CN50. 2 Create an ActiveSync connection between your PC and CN50. For help, see Connecting the CN50 to a PC on page 26. 3 Click Explore. The Mobile Device window opens. 4 Double-click My Windows Mobile-Based Device. 5 Navigate to the folder you want to copy the .cab file to, and paste the .cab file in the folder. 6 Clean boot the CN50. For help, see Clean Booting the CN50 on page 58. 7 On your CN50, tap Start > Programs > File Explorer and navigate to the location of the .cab file. 8 Tap the .cab file to install it. 44 CN50 Mobile Computer Users Manual Installing Applications Using a microSD Card Chapter 3 Developing and Installing Applications Using a microSD card is the best method for installing applications. To install applications using the microSD card 1 Suspend the CN50 and remove the microSD card. 2 Insert the microSD card into a microSD adapter card and then place it in the storage card reader connected to your PC. 3 Copy your application file to the microSD card. 4 Remove the microSD card from the adapter card and insert it into the CN50. 5 On your CN50, navigate to the storage card folder and run your application. Installing Applications Using Wavelink Avalanche You can use the Wavelink Avalanche device management system to install applications on all of your wireless CN50s. The CN50 ships with the Avalanche Enabler already loaded on it. Each time the Avalanche Enabler is activated (typically on a reset), the CN50 attempts to connect to the Avalanche Agent. When the CN50 connects to the agent, the agent determines whether an update is available and immediately starts the software upgrade, file transfer, or configuration update. Note: If you manually activate the Avalanche Enabler on the CN50, you may be prompted for a password when you exit the Avalanche Enabler. The default password is leave. To use Avalanche to remotely manage the CN50 1 Install software packages and updates for the CN50 using the Avalanche Administrative console. 2 Schedule the CN50 updates or manually initiate an update using the Avalanche Administrative console. For more information on using Wavelink Avalanche, contact your local Intermec representative or visit the Wavelink web site at www.wavelink.com. CN50 Mobile Computer Users Manual 45 Chapter 3 Developing and Installing Applications Upgrading the System Software When you upgrade your computer, you are updating the operating system (OS) and the SmartSystems Platform Bundle (SSPB) files. The SSPB files are stored on the DiskOnChip and deliver Intermec Value Add (IVA) functionality such as data collection, configuration, the Intermec wireless security suite, and SmartSystems Foundation. As new features are added to these components, you can upgrade your SSPB files without needing to upgrade the operating system. Alternately, you can choose to upgrade only the operating system if you need new functionality. If you upgrade the operating system, you will need to reinstall SSPB files. There are two ways to upgrade your computer:
You can upgrade your computer using an storage card. For help, see the next section, Upgrading the CN50 Using a microSD Card. You can upgrade your computer using the SmartSystems Console. For help, see Upgrading the CN50 Using SmartSystems Foundation on page 48. You need to download the latest upgrade files from the Intermec web site to your PC. To download the upgrade files 1 Start your web browser and go to the Intermec web site at www.intermec.com. 2 Go to Support > Downloads. 3 Click the link to search the product downloads. 4 Select your computer from the Downloads list. The Downloads page displays all of the downloads available for your computer. 5 Download the upgrade file you need. If you want to upgrade both the OS and the SSPB, you will need to download both files. 46 CN50 Mobile Computer Users Manual Upgrading the CN50 Using a microSD Card Chapter 3 Developing and Installing Applications To use a microSD card to upgrade the computer, you need an SD card reader and a microSD adapter card formatted as FAT16. To upgrade the operating system using a microSD card 1 Insert a microSD card into a microSD adapter card and then place it in the storage card reader connected to your PC. 2 Copy all required OS upgrade files to the microSD card. 3 Remove the microSD card from the adapter card and insert it into the CN50. 4 Place the CN50 in a dock connected to external power. For help, see the document that shipped with your dock. 5 Remove the microSD card when the Installation Complete menu appears. 6 Remove the CN50 from the dock and replace the battery. To upgrade the SSPB using a microSD card 1 Insert a microSD card into a microSD adapter card and then place it in the storage card reader connected to your PC. 2 Copy all required SSPB upgrade files to the microSD card. 3 Remove the microSD card from the adapter card and insert it into the CN50. 4 Press and hold ) as you insert the battery back into the CN50. 5 Continue to hold ) until a Warning message appears. 6 Release ), read the message, and press either button on the right side to continue. 7 Perform the screen alignment and wait for the CN50 to load files from the microSD card. When the progress is complete, the CN50 warm boots to reset the configuration. 8 Remove the microSD card and delete the files. 9 Set the date, time, and network communication parameters to reestablish communications with the other devices in the wireless network. CN50 Mobile Computer Users Manual 47 Chapter 3 Developing and Installing Applications Upgrading the CN50 Using SmartSystems Foundation You can use the SmartSystems console to upgrade the operating system on your CN50. The console is part of SmartSystems Foundation and is available from the Intermec web site through the Intermec Developer Library (IDL). Before you can upgrade your CN50, you need:
SmartSystems Foundation. To download SmartSystems Foundation, go to www.intermec.com/idl and open the Device Management page. the device upgrade .exe file. This file is available from the Intermec web site at www.intermec.com. Go to Support > Downloads. Make sure the file you select is for your language. To upgrade the computer using SmartSystems Foundation 1 Install SmartSystems Foundation on your PC and open the SmartSystems console. 2 Make sure the SmartSystems console and CN50 are on the same subnet. 3 Make sure your CN50 is either in a communications dock or charging dock or that power management is disabled. 4 Download the device upgrade .exe file to your PC. 5 Double-click the .exe file on your PC. An InstallShield application starts and walks you through the process of extracting the upgrade files to the default location. Note: Do not change the default location where InstallShield extracts the files. The SmartSystems console requires the files to be in this location. 6 From the SmartSystems console, locate the device upgrade to install. 7 Drag the application to each CN50 you want to upgrade or to a group of CN50s in a folder.The SmartSystems console installs the upgrade on your computers. 48 CN50 Mobile Computer Users Manual Chapter 3 Developing and Installing Applications After the download is complete, your CN50 replaces the operating system and automatically performs a cold boot. Note: The SmartSystems console indicates that your CN50 is offline, by displaying a red stop sign symbol, until the CN50 reboots and reconnects to the system. CN50 Mobile Computer Users Manual 49 Chapter 3 Developing and Installing Applications 50 CN50 Mobile Computer Users Manual 4 Troubleshooting and Maintaining the CN50 If you encounter any problems while using the mobile computer, look in this chapter to find a possible solution. You will also find information on routine maintenance. This chapter contains these sections:
Calling Product Support Troubleshooting the CN50 Resetting the CN50 Cleaning the CN50 51 Chapter 4 Troubleshooting and Maintaining the CN50 Calling Product Support To talk to an Intermec Product Support representative, call 1-800-755-5505. Before you call Intermec Product Support, make sure you have the following information ready:
Configuration number Operating system version SmartSystems Platform Bundle (SSPB) version Know the language your custom application was written in and the tools you used to create it Consult your application developer for information on your custom application. To find your configuration number Look at the CN field of the configuration label on the back of your CN50. Troubleshooting the CN50 Use this section to troubleshoot some common problems you may experience with your CN50. Note: If you send the CN50 in for service, it is your responsibility to save the computer data and configuration. Intermec is responsible only for ensuring that the hardware matches the original configuration when repairing or replacing the computer. Problems While Configuring the CN50 Problem You cannot type a character on the keypad or you can only type uppercase or lowercase letters. Possible Solution You may have locked a modifier key on the keypad. Press the necessary key sequence to unlock the key. For help, see Using the Keypad on page 7. 52 CN50 Mobile Computer Users Manual Chapter 4 Troubleshooting and Maintaining the CN50 Problems While Configuring the CN50 Problem You press and nothing happens. You insert a microSD card and cannot find the SDMMC Disk folder on the CN50. Or, you insert a bootable SD card and the CN50 does not boot from the card. The Battery status LED is on. The computer appears to be locked up and you cannot enter data. You tap the screen and nothing happens. Possible Solution Make sure the backlight is on. Make sure you have a charged battery that is installed correctly. For help, see Charging the Battery on page 3. The battery may be discharged. Replace the battery with a spare charged battery, or charge the battery. Reset the CN50. For help, see Resetting the CN50 on page 57. The microSD card may not be installed correctly. Insert the microSD card as described in Steps 2 through 4 of Using a microSD Card on page 19. The microSD card may be damaged. Try another microSD card. If the battery status LED is a steady green, the battery is more than 95% charged and computer is on a charger. If the battery status LED is blinking red, then the battery is low. Replace or charge the battery. If the battery status LED is a steady red, the main battery is on charge. Press the power key to turn off the CN50, and then press the power key again to turn it on. Try reloading the firmware. For help, see Upgrading the System Software on page 46. If the CN50 does not boot or reset, contact your Intermec representative for help. Align your screen. For help, see Aligning the Touch Screen on page 13. CN50 Mobile Computer Users Manual 53 Chapter 4 Troubleshooting and Maintaining the CN50 Problems With Wireless Connectivity Possible Solution Move closer to an access point or to a different location to reestablish communications until you reconnect with the network. Any data collected while out of range is transmitted over the network. There may be a problem with the connection between the access point and the host computer. Check with network administrator or use your access point users manual. Problem The CN50 is connected to the network, and you move to a new site to collect data. Now, your CN50 is not connected to the network. The CN50 appears to be connected to the network, but the host computer is not receiving any information from the CN50. Problems While Configuring 802.1x Security Problem The CN50 indicates that it is authenticated, but it does not communicate with the host. The CN50 does not appear to be authenticating and a network connection icon does not appear on the toolbar. A network connection icon appears in the toolbar, but then disappears. Possible Solution Make sure the CN50 IP address, host IP address, subnet mask, default router are configured for the network. The CN50 may not be communicating with the access point. Make sure the CN50 network name matches the access point network name (SSID). The 802.1x security network may not be active. Make sure the server software is properly loaded and configured on the server PC. See server software documentation for help. The CN50 may not be communicating with the intended access point. Make sure the CN50 network name matches the access point network name. Default network name is INTERMEC. The access point may not be communicating with the server. Ensure the access point is turned on, properly configured, and has 802.1x security enabled. 54 CN50 Mobile Computer Users Manual Chapter 4 Troubleshooting and Maintaining the CN50 Problems While Configuring 802.1x Security (continued) Problem You are setting up multiple access points in a network, with different SSIDs, and the connection fails. The CN50 indicates it is not authenticated. Possible Solution When you change the SSID, the WEP key values are not saved. Configure the WEP key values and save your changes. Make sure that:
the User Name and Password parameters on the CN50 match the user name and password on the authentication server. You may need to configure the password on both the CN50 and the authentication server. on your authentication server, the user and group are allowed and the group policy is allowed to log into the server. For help, see the documentation that shipped with your authentication server software. the IP address and secret key for the access point match the IP address and secret key on the authentication server. You may need to configure the IP address and secret key on both your access point and authentication server. the authentication server software is running on the server PC. When you clean boot the CN50, the date and time are not saved. Configure the date and time and save your changes. You clean boot the CN50 and this message appears, The server certificate has expired or your system date is incorrect. CN50 Mobile Computer Users Manual 55 Chapter 4 Troubleshooting and Maintaining the CN50 Problems While Scanning Bar Codes Problem You press the Scan button, but you cannot see a red beam of light. The input device attached to the CN50 does not work well or read bar code labels very quickly. When you release Scan button, the Good Read LED does not turn off. The scanner does not read the bar code label. Possible Solution You may be too far away from the bar code label. Try moving closer to the bar code label and scan it again. You may be scanning the bar code label straight on. Change the scanning angle and try again. Move within two feet of a wall to test the effective scan of the scanner. For help scanning bar codes, see Scanning Bar Codes on page 15. Set the Scanner Model command to the specific attached input device. Check enabled bar code symbologies and enable only the symbologies being used. If the CN50 is configured to use continuous/edge triggering, the Good Read LED stays on. If the CN50 is configured to use level triggering, there may be a problem. Press the Scan button or pull the trigger again without scanning a bar code label. If the LED is still on, contact your local Intermec representative. Aim the scanning beam so that it crosses the entire bar code label in one pass. Try changing the scan angle. Check the quality of the bar code label, Scan a bar code label that you know scans well. Compare the two bar code labels to see if the bar code quality is too low. You may need to replace the label that you cannot scan. Make sure the bar code symbology is enabled. For help, see the Data Collection Resource Kit which is part of IDL. You can download the resource kit from www.intermec.com/idl. Make sure the application is accepting input by scanning a bar code. You may need to type this information instead. 56 CN50 Mobile Computer Users Manual Chapter 4 Troubleshooting and Maintaining the CN50 Problems While Scanning Bar Codes (continued) Possible Solution The scanner window may be dirty. Clean the window with a solution of ammonia and water. Wipe dry. Do not allow abrasive material to touch the window. The CN50 may have decoded the bar code label in a different bar code symbology. Try scanning the bar code label again. Make sure you scan the entire label. Problem The scanner does not read the bar code labels quickly, or the scanning beam seems to be faint or obscured. The scanned bar code data that appears in your application does not match the data encoded in the bar code label. Resetting the CN50 You rarely need to reset the computer. If the computer does not resume after pressing the button, or if the computer or an application lock up, you may need to reset the CN50. The CN50 uses the configuration currently saved in flash memory during the boot process. There are two ways to reset the CN50:
Warm booting the CN50 Cold booting the CN50 Warm Booting the CN50 You may need to perform a warm boot to correct conditions where an application stops responding to the system. You can send a warm boot command by using a Microsoft API. The computer systematically shuts down, restarts, and goes through the initialization process. CN50 Mobile Computer Users Manual 57 Chapter 4 Troubleshooting and Maintaining the CN50 Cold Booting the CN50 In some cases where the computer completely stops responding, it may be necessary to perform a cold boot. Because cold booting may result in data loss, only use this method if all other recovery methods have failed. Note: Cold booting the CN50 does not guarantee that cached disk data will be saved, so transactional data may be lost during the reset. All other data is preserved. To cold boot your CN50 1 Remove the battery pack from the CN50. 2 Reinsert the battery pack and press . Clean Booting the CN50 If the CN50 does not warm boot or cold boot, you may need to perform a clean boot. When you clean boot the CN50, the CN50 only loads files and applications that are absolutely required by the operating system. Perform a clean boot to get the CN50 up and running so that you can run diagnostic tests to troubleshoot the normal boot process. The clean boot process erases the CN50 memory, including all applications and data files in the object store. To preserve applications through a clean boot, store them in the Flash File Store. For more information, see Installing Applications on the Computer on page 42. To clean boot the CN50 1 Remove the battery pack, reinsert it, and press . 2 When the CN50 starts the boot process, simultaneously press <
and > until the IPL Boot Configuration Menu appears on the screen. 3 Press 2 to select Force Cold Boot and then press 0 to select Continue with Boot. The CN50 executes the clean boot. This process takes a few minutes. 58 CN50 Mobile Computer Users Manual Chapter 4 Troubleshooting and Maintaining the CN50 4 When prompted, tap the screen to set up the CN50. 5 Follow the instructions to calibrate the screen. Cleaning the CN50 To keep the CN50 in good working order, you may need to perform these minor maintenance tasks:
Clean the scanner window. Clean the CN50 screen. Clean the scanner window and CN50 screen as often as needed for the environment in which you are using the computer. To clean the CN50, use a solution of ammonia and water. There are no user-serviceable parts inside the CN50. Opening the unit will void the warranty and may cause damage to the internal components. To clean the scanner window and computer screen 1 Press to turn off the CN50. 2 Dip a clean towel or rag in the ammonia solution and wring out the excess. Wipe off the scanner window and screen. Do not allow any abrasive material to touch these surfaces. 3 Wipe dry. CN50 Mobile Computer Users Manual 59 Chapter 4 Troubleshooting and Maintaining the CN50 60 CN50 Mobile Computer Users Manual A Specifications 61 Appendix A - Specifications Physical and Environmental Specifications Physical Dimensions Length:
15 cm (5.9 in) Width (at widest part):
7 cm (2.75 in) Height (at tallest part):
2.5 cm (1 in) Weight:
285 g (10 oz) Power and Electrical Specifications Operating:
Backup:
Rechargeable lithium-ion battery Supercap supplies 10 minutes of bridge time while replacing the main battery 4,65 V, 3A
-10C to 50C (14F to 122F)
-20C to 70C (-4F to 158F) 0C to 45C (32F to 113F) Electrical rating:
Temperature and Humidity Specifications Operating temperature:
Storage temperature:
Charging temperature:
Relative humidity (operating): 0 to 95% non-condensing Environmental rating:
Screen Specifications 240 RGB x 320 pixels 8.9 cm (3.52 in) diagonal square active area, VGA LED backlight with 5 levels of brightness LCD capable of both portrait and landscape operation Keypad Options Numeric keypad Alphanumeric keypad (QWERTY) IP54 62 CN50 Mobile Computer Users Manual Bar Code Symbologies Australian Post Aztec BPO (British Post 4-state) ChinaPost CanadaPost Codabar Codablock A Codablock F Code 11 Code 39 Code 93 Code 128/GS1-128 DataMatrix Dutch Post EAN/UPC EAN.UCC Composite GS1 DataBar Expanded Appendix A Interleaved 2 of 5 Japan Post GS1 DataBar Limited GS1 DataBar Omnidirectional Matrix 2 of 5 Maxicode Micro PDF417 MSI PDF417 Planet Plessey Postnet QR Code Standard 2 of 5 Telepen TLC 39 EA21 Imager Reading Distances Insert information here when I receive it from Krista.... CN50 Mobile Computer Users Manual 63 Appendix A - Specifications Accessories You can use these accessories (sold and ordered separately) with the CN50. To order accessories, contact your local Intermec sales representative. Battery (AB24, AB25) The AB24 standard battery and AB25 extended battery provide main power to the CN50. Quad Charger (AC21) The AC21 quad charger charges up to four CN50 batteries at one time. Ethernet Multidock (AD24) The AD24 ethernet multidock provides ethernet connectivity and power to up to four CK3c computers at one time. Charge-Only Multidock (AD23) The AD23 charge-only multidock charges up to four CN50 computers at one time. Vehicle Holder Use the vehicle holder to hold your CN50 while you are using it in a vehicle. Vehicle Battery Adapter (AE36) Use the AE36 vehicle battery adapter to provide power to your CN50 from your vehicle. AC Power Adapter (AE37) Use the AC power adapter to provide power to your CN50 from an external power supply. 64 CN50 Mobile Computer Users Manual B Default Settings 65 Appendix B Default Settings Default Configuration The following tables list the default values of the configuration commands supported on the CN50. If you restore the CN50 to factory default settings, the CN50 uses these values. The commands are grouped by function and reflect the organization of Intermec Settings. You can configure your CN50 with Intermec Settings from the SmartSystems Foundation console. For detailed information on most of the commands, see the Intermec Settings Command Reference Manual (P/N 937-016-xxx), available from the Intermec web site at www.intermec.com. Data Collection Data Collection Settings Data Collection Setting Enable Scanner Port Enable Scanner Auto-Detect Symbology Settings Symbology AustraliaPost Aztec BPO CanadaPost ChinaPost Codabar Codablock A Codablock F Code 11 Code 39 Code 93 Code 128/GS1-128 DataMatrix Default Value Enable Enable Default Value Disable Disable Disable Disable Disable Disable Disable Disable Disable Enable Disable Enable Enable 66 CN50 Mobile Computer Users Manual Symbology Settings (continued) Appendix B Default Settings Symbology DutchPost EAN/UPC EAN.UCC Composite GS1 DataBar Expanded GS1 DataBar Limited GS1 DataBar Omnidirectional Interleaved 2 of 5 JapanPost Matrix 2 of 5 Maxicode Micro PDF417 MSI PDF417 Planet Plessey Postnet QR Code Standard 2 of 5 Telepen TLC 39 Symbology Option Settings Symbology Option Preamble Postamble Global Symbology ID Default Value Disable Enable UPC A, UPC E, EAN 8, EAN 13 Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Enable Disable Disable Disable Disable Disable Disable Disable Default Value None (disabled) None (disabled) Disable CN50 Mobile Computer Users Manual Appendix B Default Settings Imager Settings Imager Setting Predefined Modes Sticky Aimer LED duration Signature Image Capture Decode Security Settings Decode Security Setting Consecutive Data Validation Identical Consecutive Timeout Different Consecutive Timeout Center Decoding Center Decoding Tolerance Communications Communications Settings Communications Setting Device Name Bluetooth Settings Bluetooth Setting Bluetooth Power Bluetooth Discoverable Bluetooth Connectable 802.11 Radio Settings 802.11 Radio Setting Security Choice Allow Security Changes Radio Measurement Default Value 1D and 2D Standard 0 (disabled) Disable Default Value 0 300 ms 0 Disable 0 Default Value IntermecCN50 Default Value Off Disable Disable Default Value Funk Security Enable 0 68 CN50 Mobile Computer Users Manual Appendix B Default Settings 802.11 Radio Settings (continued) 802.11 Radio Setting Radio Enabled Ethernet Adapter Settings IP Settings DHCP DHCP Client Identifier Primary DNS Secondary DNS Primary WINS Secondary WINS Certificates Settings Certificates Setting Import Root Certificates Import User Certificates Import Pac Files Ethernet Adapter IP Settings Ethernet Adapter IP Setting DHCP DHCP Client Identifier Primary DNS Secondary DNS Primary WINS Secondary WINS Default Value Enable Default Value Enable Null 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Default Value False False False Default Value Enable Null Null Null Null Null CN50 Mobile Computer Users Manual Appendix B Default Settings Device Settings Device Settings Device Setting Date Time Adjust for Daylight Time Good Read Beep Good Read Light Beeper Volume Display Settings Display Setting Backlight on Battery Power Backlight Turns Off After Backlight On Tap Backlight on External Power Backlight Turns Off After Backlight On Tap Backlight Level Power Management Settings Power Management Setting Battery Power Device Turns Off After Screen Turns Off After External Power Device Turns Off After Screen Turns Off After Default Value Null Null Disable One Beep On Medium Default Value 10 min Enable 1 min Enable High Default Value 2 min 1 min Disable Disable 70 CN50 Mobile Computer Users Manual Appendix B Default Settings Device Monitor Device Monitor Settings Device Monitor Setting Poll Period Threshold Values Backup Battery Charge Remaining Main Battery Charge Remaining Storage Load Memory Load Core Messaging Service Core Messaging Service Settings Core Messaging Service Setting Associated Server IP Server Name Keep Alive Ping Interval Default Value 1 min 10 10 90 90 Default Value Null INTERMEC 30 s CN50 Mobile Computer Users Manual Appendix B Default Settings 72 CN50 Mobile Computer Users Manual C Keypads and Keystrokes 73 Appendix C - Keypads and Keystrokes Standard Characters Use the following tables to learn how to enter standard and hidden characters and functions with the keypad. Alphanumeric Characters Character a b c d e f g h i j k l m n o p q r s t u v w x QWERTY Keypad Numeric Keypad A B C D E F G H I J K L M N O P Q R S T U V W X
]2
]22
]222
]3
]33
]333
]4
]44
]444
]5
]55
]555
]6
]66
]666
]7
]77
]777
]7777
]8
]88
]888
]9
]99 74 CN50 Mobile Computer Users Manual Alphanumeric Characters (continued) Appendix C - Keypads and Keystrokes Character y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z QWERTY Keypad Numeric Keypad Y Z uA uB uC uD uE uF uG uH uI uJ uK uL uM uN uO uP uQ uR uS uT uU uV uW uX uY uZ
]999
]9999
]12
]122
]1222
]13
]133
]1333
]14
]144
]1444
]15
]155
]1555
]16
]166
]1666
]17
]177
]1777
]17777
]18
]188
]1888
]19
]199
]1999
]19999 CN50 Mobile Computer Users Manual 75 Appendix C - Keypads and Keystrokes Alphanumeric Characters (continued) Character 0 1 2 3 4 5 6 7 8 9 QWERTY Keypad Numeric Keypad
[l
[Y
[U
[I
[H
[J
[K
[B
[N
[M 0 1 2 3 4 5 6 7 8 9 Characters and Functions Function Forward Tab Back Tab Space Backspace Shift Caps Lock Up Arrow Down Arrow Left Arrow Right Arrow
QWERTY Keypad Numeric Keypad _
[_ s r u
[u
[O
[Q
[V
[E
[R
[S _
]0 r
[ or ]
]1
[) Not available Not available
Not available Not available Not available 76 CN50 Mobile Computer Users Manual Characters and Functions (continued) Appendix C - Keypads and Keystrokes Function
ok
Start (Windows)
(apostrophe)
, (comma)
. (period) Esc Backlight Talk End call QWERTY Keypad Numeric Keypad
[C
[T
[P
[G
[W
[A
[D
[F
[L
[Z
[X
l a h
Not available Not available Not available Not available Not available Not available
[. a h CN50 Mobile Computer Users Manual 77 Appendix C - Keypads and Keystrokes 78 CN50 Mobile Computer Users Manual D Imager Configuration Bar Codes 79 Appendix D - Imager Configuration Bar Codes Imager Configuration Bar Codes Use the following bar codes to quickly configure the CN50 imager. These bar codes allow you to enable or disable symbologies, reset to factory defaults, and set predefined imager modes. If you need to create a bar code for a specific setup, please download a free copy of EasySet from the CN50 page on the Intemec web site at www.intermec.com. Basic Configuration Bar Codes Command Disable all symbologies Reset to Factory Defaults Postamble with Carriage Return and Line Feed Imager Predefined Modes Command 1D codes only Standard 1D and 2D codes Bar Code Bar Code 80 CN50 Mobile Computer Users Manual Appendix D - Imager Configuration Bar Codes Imager Predefined Modes (continued) Command Bar Code 1D and 2D codes bright environment 1D and 2D codes with reflective surface Symbology Bar Codes Symbology AustraliaPost Enable Bar Code Disable Bar Code Aztec BPO CanadaPost Codabar CN50 Mobile Computer Users Manual 81 Appendix D - Imager Configuration Bar Codes Symbology Bar Codes (continued) Symbology Code 11 Code 39 Code 93 Code 128 DataMatrix DutchPost EAN 8 EAN 13 82 Enable Bar Code Disable Bar Code CN50 Mobile Computer Users Manual Symbology Bar Codes (continued) Appendix D - Imager Configuration Bar Codes Enable Bar Code Disable Bar Code Symbology EAN 128 Interleaved 2 of 5 JapanPost Matrix 2 of 5 MaxiCode Micro PDF417 MSI Code PDF417 CN50 Mobile Computer Users Manual 83 Appendix D - Imager Configuration Bar Codes Symbology Bar Codes (continued) Symbology Planet Plessey Code Postnet QR Code Standard 2 of 5 Telepen TLC 39 UPC-A 84 Enable Bar Code Disable Bar Code CN50 Mobile Computer Users Manual Symbology Bar Codes (continued) Appendix D - Imager Configuration Bar Codes Enable Bar Code Disable Bar Code Symbology UPC-E UPC-E1 CN50 Mobile Computer Users Manual 85 Appendix D - Imager Configuration Bar Codes 86 CN50 Mobile Computer Users Manual Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com 2009 Intermec Technologies Corporation. All rights reserved. CN50 Mobile Computer Users Manual
*935-022-001*
P/N 935-022-001
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2011-09-30 | 1852.4 ~ 1907.5 | PCE - PCS Licensed Transmitter held to ear | Class II permissive change or modification of presently authorized equipment |
| 2 | 2009-09-10 | 1852.4 ~ 1907.5 | PCE - PCS Licensed Transmitter held to ear | |
| 3 | 2009-06-09 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| 4 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 5 | 1852.4 ~ 1907.5 | PCE - PCS Licensed Transmitter held to ear |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 3 4 5 | Effective |
2011-09-30
|
||||
| 1 2 3 4 5 |
2009-09-10
|
|||||
| 1 2 3 4 5 |
2009-06-09
|
|||||
| 1 2 3 4 5 | Applicant's complete, legal business name |
Intermec Technologies Corporation
|
||||
| 1 2 3 4 5 | FCC Registration Number (FRN) |
0022970339
|
||||
| 1 2 3 4 5 | Physical Address |
9680 Old Bailes Rd.
|
||||
| 1 2 3 4 5 |
Fort Mill, South Carolina 29707
|
|||||
| 1 2 3 4 5 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 2 3 4 5 | TCB Application Email Address |
t******@siemic.com
|
||||
| 1 2 3 4 5 |
m******@CCSEMC.COM
|
|||||
| 1 2 3 4 5 |
m******@ccsemc.com
|
|||||
| 1 2 3 4 5 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| 1 2 3 4 5 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
| app s | FCC ID | |||||
| 1 2 3 4 5 | Grantee Code |
EHA
|
||||
| 1 2 3 4 5 | Equipment Product Code |
01CN50
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 3 4 5 | Name |
B******** R******
|
||||
| 1 2 3 4 5 | Title |
VP & GC, Honeywell Scanning & Mobility
|
||||
| 1 2 3 4 5 | Telephone Number |
803-8********
|
||||
| 1 2 3 4 5 | Fax Number |
803-8********
|
||||
| 1 2 3 4 5 |
b******@honeywell.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 3 4 5 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 4 5 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| 1 2 3 4 5 | Yes | |||||
| 1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/25/2009 | ||||
| 1 2 3 4 5 | 07/23/2009 | |||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 3 4 5 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 3 4 5 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
| 1 2 3 4 5 | DTS - Digital Transmission System | |||||
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter | |||||
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UMTS/GSM/EVDO/CDMA/802.11bg/BT | ||||
| 1 2 3 4 5 | UTMS/GSM/EVDO/CDMA/802.11bg/BT | |||||
| 1 2 3 4 5 | Handheld device WCDMA/GSM/GPRS/EDGE/802.11bg/BT | |||||
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 3 4 5 | Yes | |||||
| 1 2 3 4 5 | Modular Equipment Type | Does not apply | ||||
| 1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
| 1 2 3 4 5 | Original Equipment | |||||
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 3 4 5 | Grant Comments | C2PC for upgrading 5M camera. Power output listed is ERP for Part 22 and EIRP for Part 24 and Part 27. HAC rating M4:2007 This device contains modes not operational in U.S. Territories. SAR compliance for body-worn operation is based on a separation distance of 2.0 cm between the unit and the body of the user. Belt clips or holsters should not contain metallic components. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The Highest Reported SAR for Head , Body-Worn accessory of this FCC ID is , 0.34W/kg , 1.21W/kg respectively. | ||||
| 1 2 3 4 5 | Class II Permissive Change to add CDMA2000 modulation. Power output listed is ERP for Part 22 and EIRP for Part 24 and Part 27. . SAR compliance for body-worn operation is based on a separation distance of 2.0 cm between the unit and the body of the user. Belt clips or holsters should not contain metallic components. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 Head: 0.195 W/kg; Body-worn 1.21 W/kg: Part 24 PCS Band Head: 0.341 W/kg; Body-worn 0.657 W/kg.; Part 27 AWS Band Head: 0.088 W/kg; Body-worn 0.164 W/kg.; Part 15.247 2.4GHz Band Head: 0.0.0057 W/kg; Body-worn 0.026 W/kg. HAC rating M4:2007 This device contains modes not operational in U.S. Territories. | |||||
| 1 2 3 4 5 | Power listed is the maximum peak conducted output power. Antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 Head: 0.171 W/kg; Body-worn 1.21 W/kg: Part 24 PCS Band Head: 0.341 W/kg; Body-worn 0.657 W/kg.; Part 27 AWS Band Head: 0.088 W/kg; Body-worn 0.164 W/kg.; Part 15.247 2.4GHz Band Head: 0.0057 W/kg; Body-worn 0.026 W/kg. | |||||
| 1 2 3 4 5 | Output power listed is conducted. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
| 1 2 3 4 5 | Power output listed is ERP for Part 22 and EIRP for Part 24 and Part 27. . SAR compliance for body-worn operation is based on a separation distance of 2.0 cm between the unit and the body of the user. Belt clips or holsters should not contain metallic components. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 Head: 0.171 W/kg; Body-worn 1.21 W/kg: Part 24 PCS Band Head: 0.341 W/kg; Body-worn 0.657 W/kg.; Part 27 AWS Band Head: 0.088 W/kg; Body-worn 0.164 W/kg.; Part 15.247 2.4GHz Band Head: 0.0.0057 W/kg; Body-worn 0.026 W/kg. HAC rating M3:2007 This device contains modes not operational in U.S. Territories. | |||||
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 3 4 5 | Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
||||
| 1 2 3 4 5 |
Compliance Certification Services
|
|||||
| 1 2 3 4 5 | Name |
L****** B****
|
||||
| 1 2 3 4 5 |
T**** C******
|
|||||
| 1 2 3 4 5 | Telephone Number |
408-5********
|
||||
| 1 2 3 4 5 |
510-7********
|
|||||
| 1 2 3 4 5 | Fax Number |
408 5********
|
||||
| 1 2 3 4 5 |
510-6********
|
|||||
| 1 2 3 4 5 |
l******@siemic.com
|
|||||
| 1 2 3 4 5 |
t******@ccsemc.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 22H | HC | 824.2 | 848.8 | 1.77858 | 2.5 ppm | 243KGXW | |||||||||||||||||||||||||||||||||
| 1 | 2 | 22H | HC | 824.2 | 848.8 | 1.07152 | 2.5 ppm | 247KG7W | |||||||||||||||||||||||||||||||||
| 1 | 3 | 22H | HC | 826.4 | 846.6 | 0.44668 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
| 1 | 4 | 22H | HC | 824.7 | 848.31 | 0.417 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 1 | 5 | 24E | HC | 1850.2 | 1909.8 | 1.90546 | 2.5 ppm | 246KGXW | |||||||||||||||||||||||||||||||||
| 1 | 6 | 24E | HC | 1850.2 | 1909.8 | 1.28825 | 2.5 ppm | 245KG7W | |||||||||||||||||||||||||||||||||
| 1 | 7 | 24E | HC | 1852.4 | 1907.5 | 0.51286 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
| 1 | 8 | 24E | HC | 1851.25 | 1908.75 | 1.23 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 1 | 9 | 27 | 1712.4 | 1752.6 | 0.24547 | 2.5 ppm | 4M24F9W | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 22H | HC | 824.2 | 848.8 | 1.77828 | 2.5 ppm | 243KGXW | |||||||||||||||||||||||||||||||||
| 2 | 2 | 22H | HC | 824.2 | 848.8 | 1.07152 | 2.5 ppm | 247KG7W | |||||||||||||||||||||||||||||||||
| 2 | 3 | 22H | HC | 826.4 | 846.6 | 0.44668 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
| 2 | 4 | 22H | HC | 824.7 | 848.31 | 0.417 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 2 | 5 | 24E | HC | 1850.2 | 1909.8 | 1.90546 | 2.5 ppm | 246KGXW | |||||||||||||||||||||||||||||||||
| 2 | 6 | 24E | HC | 1850.2 | 1909.8 | 1.28825 | 2.5 ppm | 245KG7W | |||||||||||||||||||||||||||||||||
| 2 | 7 | 24E | HC | 1852.4 | 1907.5 | 0.51286 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
| 2 | 8 | 24E | HC | 1851.25 | 1908.75 | 1.23 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 2 | 9 | 27 | 1712.4 | 1752.6 | 0.24547 | 2.5 ppm | 4M24F9W | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1870700 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 4 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0008300 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 5 | 1 | 22H | HC | 824.2 | 848.8 | 1.77828 | 2.5 ppm | 243KGXW | |||||||||||||||||||||||||||||||||
| 5 | 2 | 22H | HC | 824.2 | 848.8 | 1.07152 | 2.5 ppm | 247KG7W | |||||||||||||||||||||||||||||||||
| 5 | 3 | 22H | HC | 826.4 | 846.6 | 0.44668 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
| 5 | 4 | 24E | HC | 1850.2 | 1909.8 | 1.90546 | 2.5 ppm | 246KGXW | |||||||||||||||||||||||||||||||||
| 5 | 5 | 24E | HC | 1850.2 | 1909.8 | 1.28825 | 2.5 ppm | 245KG7W | |||||||||||||||||||||||||||||||||
| 5 | 6 | 24E | HC | 1852.4 | 1907.5 | 0.51286 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
| 5 | 7 | 27 | 1712.4 | 1752.6 | 0.24547 | 2.5 ppm | 4M24F9W | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC