all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 948.04 KiB | ||||
1 2 |
|
User Manual 2 | Users Manual | 104.44 KiB | / September 05 2002 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Attestation Statements | / September 05 2002 | ||||||
1 2 | Attestation Statements | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Cover Letter(s) | / September 05 2002 | ||||||
1 2 | ID Label/Location Info | / September 05 2002 | ||||||
1 2 | Block Diagram | / September 05 2002 | ||||||
1 2 | Internal Photos | / September 05 2002 | ||||||
1 2 | Cover Letter(s) | / September 05 2002 | ||||||
1 2 | Operational Description | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Cover Letter(s) | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 | ||||||
1 2 | Test Report | / September 05 2002 |
1 2 | User Manual | Users Manual | 948.04 KiB |
Exhibit D: User Manual FCC ID: HN2EASYLAN Part No. 072642-001 Important EasyLAN Wireless Information!
Contents For Users in the United States and Canada........................................................................2 For Users Outside of the United States and Canada..............................................................3 Franais.................................................................................................................5 Deutsch..................................................................................................................6 Italiano..................................................................................................................7 Espaol..................................................................................................................8 Portugus...............................................................................................................9 For Users in the United States and Canada Place this supplement in your manual. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Federal Communications Commission Compliance This equipment is intended for operation in a commercial environment, in compliance with the requirements for a Class A digital device, pursuant to Part 15 of the FCC Rules, and it must not be used in a residential environment; however, it has also been tested and found to comply with the more stringent requirements for a Class B device, pursuant to Part 15 of the FCC Rules. It generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause interference to radio communications. If this equipment causes interference, the user will be required to correct the interference at the users own expense. Note: To maintain compliance with FCC Rules, the input/output (I/O) cables that interconnect between the device and any peripheral must be as specified by Intermec. Operation Warning To comply with the FCCs RF exposure requirements and minimize health hazards:
The user shall stay at least 20 cm (8 in) away from the antenna of this device, when the device is in use in Intermec printers. Installation Warning To comply with the FCCs RF exposure requirements and minimize health hazards:
Printers containing this device must be installed in such a way that the user will be at least 20 cm (8 in) away from the antenna, when the device is in use. The installers should not forget that the burden of maintaining this distance is on the installer and not the user. The antennas should be installed in a manner that will comply with this requirement. Caution Changes or modifications not expressly approved by Intermec could void the users authority to operate this equipment. Industry Canada Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This device requires a radio license, unless it is used totally inside a building. (The user must obtain this license.) Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. 2 Cet appareil exige une license radio moins dtre entirement install dans un btiment. (Lutilisateur doit obtenir cette license.) For Users Outside of the United States and Canada The Intermec product you purchased contains an EasyLAN Wireless. This module transmits and receives data using a 2.4 GHz Direct Sequence Spread Spectrum system. In some host devices the transceiver is user accessible. If you are using such a device, please pay attention to the radio usage guidelines provided in the host device manual or getting started guide. The use of the correct antenna with correct installation is especially important for legal and efficient use of the product. In some host devices the transceiver is not user accessible. Please see the host device manual for any radio-related instructions for those products. Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the Intermec Web site for additional documentation at www.intermec.com. Hereby, Intermec Technologies Corporation declares that this EasyLAN Wireless is in compliance with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (including Ammendment 1-4, 11) SP/DGPT/ATAS 23 (1995-02) The original Declaration of Conformity is available on the Intermec Technologies Corporation Web site at www.intermec.com. This product transmits electromagnetic waves at 2.4 GHz frequency range. It has been tested and found compliant with U.S. (OET Guide 65) and Canadian (RSS 102) RF exposure regulations. There are no regulations covering this product type in the EU at this time. The transmitter modules output power is 100mW or less. The products using this module are intended for business and industrial environments. They should not be used in residential environments and by children. This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Community. The following table indicates the areas of intended use of the equipment and any known restrictions. 3 Country of Intended Use Yes License Required No Restrictions Details X X If this product is used outdoors, then it is restricted to 2460 MHz to 2483.5 MHz. Frequency operation restricted to 2462 MHz to 2472 MHz. Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Portugal Spain Sweden United Kingdom Other non-EU:
Iceland Liechtenstein Norway Slovenia Switzerland X X X X X X X X X X X X X X X X X X X X Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22. 4 Pour les utilisateurs en dehors du Canada et des Etat-unis Le produit Intermec que vous avez achet contient un module metteur-rcepteur de EasyLAN Wireless. Ce module peut transmettre et recevoir des donnes l'aide d'un systme d'talement du spectre en squence directe de 2,4 GHz. Sur certains appareils htes, l'metteur-rcepteur est accessible l'utilisateur. Si vous utilisez un tel appareil, veuillez respecter les directives d'utilisation radio prsentes dans le manuel de l'appareil hte ou dans le guide de mise en route. L'utilisation d'une antenne approprie avec une installation correcte est particulirement importante pour assurer le respect des rglementations et l'efficacit du produit. Sur certains appareils htes, l'metteur-rcepteur n'est pas accessible l'utilisateur. Veuillez consulter le manuel de l'appareil hte pour obtenir les instructions concernant les missions radio pour ces produits. Les informations de programmation et de configuration pour les metteurs-rcepteurs sont galement fournies dans la documentation de l'appareil hte. Pour obtenir toute documentation supplmentaire, veuillez consulter le site Web d'Intermec, l'adresse www.intermec.com. Par la prsente, Intermec Technologies Corporation dclare que ce EasyLAN Wireless est conforme aux exigences de base et autres exigences pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a t valu par rapport aux normes suivantes :
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (comprenant l'amendement 1-4, 11) SP/DGPT/ATAS 23 (Fvrier 1995) La Dclaration de conformit originale est disponible sur le site Web d'Intermec Technologies Corporation, l'adresse www.intermec.com. Ce produit met des ondes lectromagntiques une plage de frquences de 2,4 GHz. Il a t valu et reconnu conforme aux rglements concernant l'exposition la radiofrquence des tats-Unis (OET Guide 65) et du Canada (RSS 102). Il n'y a actuellement aucun rglement couvrant ce type de produit pour l'Union europenne. La puissance de sortie du module metteur-rcepteur est de 100 mW ou moins. Les produits utilisant ce module sont destins des environnements commerciaux et industriels. Ils ne doivent pas tre utiliss dans des environnements rsidentiels et par des enfants. Ce produit est marqu de ce logo et il utilise des bandes de frquence radio qui ne sont pas harmonises sur le territoire de la Communaut europenne. Le tableau suivant rpertorie les zones d'utilisation prvues pour l'quipement et les restrictions connues. Pays dutilisation prvu Oui Licence requise Non Restrictions Dtails Belgique France X X X X Lorsque ce produit est utilis lextrieur, il est alors limit une valeur variant entre 2 460 MHz et 2 483,5 MHz La frquence dopration est limite une valeur variant entre 2 462 MHz et 2 472 MHz. 5 Conformit additionelle la norme EMI/RFI Cet appareil respecte les limites imposes pour la Classe B par le CISPR 22. Fr Benutzer auerhalb von Kanada und den Vereinigten Staaten Das Intermec-Produkt, das Sie gekauft haben, enthlt ein Sende-Empfangs-Modul, EasyLAN Wireless. Dieses Modul sendet und empfngt Daten mit Hilfe eines 2,4-GHz-Direktsequenz-
Spreizspektrumsystems. Bei einigen Hostgerten ist das Sende-Empfangs-Gert vom Benutzer aus zugnglich. Wenn Sie ein solches Gert verwenden, beachten Sie bitte die Funkverkehrsanleitung im Benutzerhandbuch des Hostgertes oder in der Anleitung Erste Schritte. Das Verwenden der richtigen Antenne und die richtige Installation sind aus legalen Grnden und fr den effizienten Gebrauch des Produktes besonders wichtig. Bei einigen Hostgerten ist das Sende-Empfangs-Gert nicht vom Benutzer aus zugnglich. Bitte konsultieren Sie das Benutzerhandbuch des Hostgertes, um Anleitungen bezglich des Funkverkehrs dieser Produkte zu erhalten. Dieses Produkt bermittelt elektromagnetische Wellen in einem Frequenzbereich von 2,4 GHz. Es wurde getestet und in bereinstimmung mit U.S. (OET Anleitung 65) und kanadischen (RSS 102) RF-
Bestrahlungsvorschriften befunden. Zur Zeit gibt es in der EU keine Richtlinien, die diesen Produkttyp abdecken. In der Dokumentation des Hostgertes finden Sie auerdem Informationen zum Programmieren und Konfiguriern der Sende-Empfangs-Gerte. Weitere Hinweise erhalten Sie auf der Intermec-Website unter www.intermec.com. Hiermit erklrt Intermec Technologies Corporation, dass das EasyLAN Wireless mit den wesentlichen Anforderungen und anderen sachdienlichen Vorschriften der R&TTE-Richtlinie (1999/5/EC) bereinstimmt. Dieses Produkt wurde gem der folgenden Normen bewertet:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (einschl. Amdt. 1-4, 11) SP/DGPT/ATAS 23 (Februar 1995) Die Originalkonformittserklrung steht auf der Website der Intermec Technologies Corporation unter www.intermec.com zur Verfgung. Die Ausgangsleistung des Sende-Empfangs-Moduls betrgt 100mW oder weniger. Die Produkte, die dieses Modul verwenden, sind fr geschftliche und industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden und in der Nhe von Kindern verwendet werden. Das Produkt ist mit diesem Markenzeichen versehen und verwendet Radiofrequenzbreiten, die in der Europischen Gemeinschaft nicht berall aufeinander abgestimmt sind. Zustzliche Elektromagnetische Strung-bereinstimmung Dieses Gert entspricht den Grenzbestimmungen der Klasse B von CISPR 22. 6 Per gli utenti al di fuori del Canada o degli Stati Uniti Il prodotto Intermec che avete acquistato contiene un modulo transceiver EasyLAN Wireless. Il transceiver trasmette e riceve i dati tramite un sistema a 2,4 GHz che utilizza la tecnologia DSSS
(sequenza diretta, spettro esteso). In alcuni dispositivi host, l'utente ha la possibilit di accedere al transceiver. Se il dispositivo che utilizzate di questo tipo, vi preghiamo di prestare attenzione alle direttive sull'utilizzo dei dispositivi radio fornite nel manuale o nella guida introduttiva del dispositivo host. Ai fini dell'efficienza e del rispetto delle normative, particolarmente importante installare correttamente ed utilizzare il tipo di antenna appropriato per questo prodotto. In alcuni dispositivi host, l'utente non ha la possibilit di accedere al transceiver. Per questi prodotti, vi preghiamo di consultare le istruzioni sui dispositivi radio fornite eventualmente nel manuale del dispositivo host. La documentazione del dispositivo host fornisce inoltre le informazioni sulla programmazione e la configurazione dei transceiver. Per altre informazioni, consultate il sito Web Intermec all'indirizzo www.intermec.com. Con la presente Intermec Technologies Corporation dichiara che questo EasyLAN Wireless conforme ai requisiti essenziali e alle altre clausole importanti della direttiva R&TTE (1999/5/EC). Questo prodotto stato valutato in base ai seguenti standard:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (incluso Amdt. 1-4, 11) SP/DGPT/ATAS 23 (febbraio 1995) La dichiarazione di conformit originale disponibile presso il sito Web di Intermec Technologies Corporation a www.intermec.com. Questo prodotto trasmette onde elettromagnetiche con una frequenza intorno ai 2,4 GHz. Dai collaudi ai quali stato sottoposto risultato conforme alle norme statunitensi (OET Guide 65) e a quelle canadesi
(RSS 102) relative all'esposizione alle radiofrequenze. Attualmente non esistono norme relative a questo prodotto nell'Unione Europea. La potenza di uscita del modulo trasmittente di 100 mW o meno. I prodotti che utilizzano questo modulo sono destinati ad ambienti industriali e commerciali e non debbono essere utilizzati in ambienti residenziali e dai bambini. Questo prodotto reca questo marchio ed utilizza bande di radiofrequnza che non sono armonizzate nell'ambito della Comunit Europea. Ulteriore conformit con EMI/RFI Questo dispositivo conforme ai limiti stabiliti in CISPR 22 per la Classe B. 7 Para Usuarios Fuera de Canada o de los Estados Unidos Este producto de Intermec contiene un mdulo transceptor EasyLAN Wireless. Dicho mdulo transmite y recibe datos por medio de un sistema de espectro ensanchado en secuencia directa de 2,4 GHz. En algunos dispositivos host, el usuario puede tener acceso al transceptor. En este caso, se debe prestar atencin a las instrucciones para uso de la radio contenidas en el manual o en la gua del usuario del dispositivo host. El uso de la antena correspondiente, as como la instalacin apropiada de la misma son de especial importancia para un funcionamiento eficiente y de acuerdo con la legislacin vigente. En algunos dispositivos host, el usuario no puede tener acceso al transceptor. En este caso, se debe consultar el manual del dispositivo para obtener instrucciones sobre el uso de la radio. Para obtener informacin sobre la configuracin y programacin del transceptor, consulte la documentacin provista con el dispositivo host. Para obtener documentacin adicional, visite el sitio web de Intermec: www.intermec.com. Por la presente, Intermec Technologies Corporation declara que el EasyLAN Wireless cumple con los requisitos esenciales de acuerdo con la directiva (1999/5/EC) de R&TTE. Este producto ha sido evaluado de acuerdo con los siguientes estndares o normas:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (incl. Enmienda 1-4, 11) SP/DGPT/ATAS 23 (febrero de 1995) La Declaracin de Conformidad original est disponible en el sitio web de Intermec Technologies Corporation: www.intermec.com. Este producto transmite ondas electromagnticas de radio en la gama de frecuencias de 2,4 GHz. Ha sido probado y se ha determinado que cumple con las reglamentaciones de los EE.UU. (OET Guide 65) y del Canad (RSS 102), referentes a la exposicin de RF. En este momento, no existen reglamentaciones que abarquen este producto en la UE. La potencia de salida del mdulo transmisor es de 100mW o menos. Los productos que usan este mdulo estn destinados para uso en ambientes comerciales e industriales. No deben ser usados en ambientes residenciales o en la proximidad de nios. Este producto est marcado con este logotipo y usa bandas de frecuencia de radio que no han sido armonizadas a lo largo de la Unin Europea. Conformidad adicional con EMI/RFI Este dispositivo cumple con los lmites requeridos para la Clase B de CISPR 22. 8 Para Usurios Fora do Canad ou dos Estados Unidos O produto Intermec que voc comprou contm um mdulo transceptor EasyLAN Wireless. Este mdulo transmite e recebe dados usando um sistema DSSS (Espectro de Difuso de Seqncia Direta) de 2,4 GHz . Em alguns dispositivos hospedeiros, o transceptor acessvel ao usurio. Se voc est usando um dispositivo desse tipo, verifique as orientaes sobre o uso de rdio fornecidas pelo manual ou pelo guia de primeiros passos do dispositivo hospedeiro. O uso da antena correta adequadamente instalada especialmente importante para a utilizao legal e eficiente do produto. Em alguns equipamentos hospedeiros, o transceptor no acessvel ao usurio. Consulte o manual desses equipamentos para obteno de todas as instrues relativas ao uso de rdio nos mesmos. As informaes sobre programao e configurao dos transceptores tambm so fornecidas na documentao do dispositivo hospedeiro. Consulte tambm o site da Intermec na web, no endereo www.intermec.com, para documentao complementar. Por este documento, a Intermec Technologies Corporation declara que o EasyLAN Wireless atende aos requisitos essenciais e outras condies relevantes da Diretiva R&TTE (1999/5/EC). Esse produto foi avaliado em relao aos seguintes padres:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (includa Amdt. 1-4, 11) SP/DGPT/ATAS 23 (fevereiro de 1995) A Declarao de Conformidade original est disponvel no site da web da Intermec Technologies Corporation no endereo www.intermec.com. Este produto transmite ondas eletromagnticas na faixa de freqncia de 2,4 GHz. Ele foi testado e aprovado quanto sua conformidade com os regulamentos de exposio RF dos EUA (OET Guide 65) e do Canad (RSS 102). No existem regulamentos cobrindo esse tipo de produto atualmente na UE. A potncia de sada do mdulo transmissor de 100mW ou menos. Os produtos que usam este mdulo so destinados aos ambientes comerciais e industriais. Eles no devem ser utilizados em ambientes residenciais e por crianas. Este produto identificado por esta logomarca e utiliza bandas de freqncia de rdio que no esto harmonizadas na Comunidade Europia. Conformidades EMI/RFI Adicionais Este produto atende aos requisitos de limite Classe B do CISPR22. 9 Part No. 072642-001
*072642-001*
*072642-001*
6001 36th Avenue West Everett, WA 98203 2002 Intermec Technologies Corp. All Rights Reserved User's Manual EasyLAN Wireless Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203-9280 U.S. service and technical support: 1-800-755-5505 U.S. media supplies ordering information: 1-800-227-9947 Canadian service and technical support: 1-800-668-7043 Canadian media supplies ordering information: 1-800-268-6936 Outside U.S.A. and Canada: Contact your local Intermec service supplier. The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service Intermec manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec. Information and specifications in this manual are subject to change without notice. 2002 by Intermec Technologies Corporation All Rights Reserved The word Intermec, the Intermec logo, INCA (under license), MobileLAN, JANUS, IRL, Trakker Antares, EZBuilder, TE 2000, Data Collection Browser, dcBrowser, Universal Access Point, UAP, Duratherm, EasyCoder, Precision Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or registered trademarks of Intermec. Throughout this manual, trademarked names may be used. Rather than put a trademark ( or ) symbol in every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement. There are U.S. and foreign patents pending. blank Contents Contents Before You Begin vii Warranty Information vii Safety Summary vii Warnings, Cautions, and Notes viii About This Manual ix Other Intermec Manuals xi 1 Installing the EasyLAN Wireless Introducing the EasyLAN Wireless 1-3 System Requirements 1-3 Supported Operating Systems and Network Protocols 1-4 Understanding the EasyLAN Wireless 1-5 Installing the EasyLAN Wireless 1-6 Attaching the Antenna 1-6 Starting and Testing the EasyLAN Wireless 1-7 Connecting the EasyLAN Wireless to an RS-232 Serial Port 1-7 Setting Radio and Network Communications 1-8 2 Configuring the EasyLAN Wireless Before You Begin 2-3 Configuring the TCP/IP Parameters 2-4 Using the Web Browser Interface 2-4 Using the EasyLAN Wireless Admin Utility 2-8 Configuring the Radio Parameters 2-12 Using the Web Browser Interface 2-13 Using the EasyLAN Wireless Admin Utility 2-14 Configuring the Access and Update Passwords 2-16 Configuring the Ports 2-18 Configuring the Port Services 2-20 Configuring for the NetWare Network 2-24 Configuring the NetWare Parameters 2-25 Configuring Additional Queues 2-26 Configuring for NetBIOS 2-26 iii EasyLAN Wireless Users Manual Configuring the DLC Parameters 2-28 Configuring for UNIX 2-29 Configuring for a Berkeley UNIX Host 2-29 Configuring for Sun Solaris 2-30 Configuring for HP/UX 2-31 Configuring for IBM AIX 2-32 Configuring for Other Systems 2-33 3 Managing the EasyLAN Wireless Rebooting the EasyLAN Wireless 3-3 Using the Web Browser Interface 3-3 Using the EasyLAN Wireless Admin Utility 3-6 Setting the EasyLAN Wireless to Factory Defaults 3-9 Using the Web Browser Interface 3-9 Using the EasyLAN Wireless Admin Utility 3-10 Printing a Test Label 3-10 Using the Web Browser Interface 3-10 Using the EasyLAN Wireless Admin Utility 3-11 Reloading Firmware 3-11 Viewing Ethernet Statistics 3-13 Other EasyLAN Wireless Admin Utility Functions 3-14 Configuring IP Subnets 3-14 Adding an EasyLAN Wireless 3-15 Loading Files 3-16 Saving Files 3-16 Using the Port Monitor Installing the Port Monitor 4-3 Troubleshooting the EasyLAN Wireless Troubleshooting Printing Problems 5-3 Troubleshooting Wireless Configuration Problems 5-3 Troubleshooting Network Configuration 5-4 4 5 iv Contents A Console Commands Sending the Console Commands A-3 General Commands A-5 TCP/IP Commands A-7 NetWare Commands A-8 Radio Commands A-9 v blank C 39Before You Begin Before You Begin This section introduces you to standard warranty provisions, safety precautions, warnings and cautions, document formatting conventions, and sources of additional product information. A documentation roadmap is also provided to guide you in finding the appropriate information. Warranty Information To receive a copy of the standard warranty provision for this product, contact your local Intermec support services organization. In the U.S. call 1-800-755-5505, and in Canada call 1-800-668-7043. If you live outside of the U.S. or Canada, you can find your local Intermec support services organization on the Intermec Web site at www.intermec.com. Safety Summary Your safety is extremely important. Read and follow all warnings and cautions in this book before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions. Do not repair or adjust alone Do not repair or adjust energized equipment alone under any circumstances. Someone capable of providing first aid must always be present for your safety. First aid Always obtain first aid or medical attention immediately after an injury. Never neglect an injury, no matter how slight it seems. Resuscitation Begin resuscitation immediately if someone is injured and stops breathing. Any delay could result in death. To work on or near high voltage, you should be familiar with approved industrial first aid methods. Energized equipment Never work on energized equipment unless authorized by a responsible authority. Energized electrical equipment is dangerous. Electrical shock from energized equipment can cause death. If you must perform authorized emergency work on energized equipment, be sure that you comply strictly with approved safety regulations. vii EasyLAN Wireless Users Manual Warnings, Cautions, and Notes The warnings, cautions, and notes in this manual use this format. Warning A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment. Avertissement Un avertissement vous avertit dune procdure de fonctionnement, dune mthode, dun tat ou dun rapport qui doit tre strictement respect pour viter loccurrence de mort ou de blessures graves aux personnes manupulant lquipement. Caution A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Conseil Une prcaution vous avertit dune procdure de fonctionnement, dune mthode, dun tat ou dun rapport qui doit tre strictement respect pour empcher lendommagement ou la destruction de lquipement, ou laltration ou la perte de donnes. Note: Notes are statements that either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. viii C 39Before You Begin About This Manual This manual contains all of the information necessary to install, configure, operate, maintain, and troubleshoot the EasyLAN Wireless. This manual was written for users who want to know more about the EasyLAN Wireless. It was also written for installers, applications analysts, systems engineers, and programmers who will install, operate, program, and troubleshoot the EasyLAN Wireless in a network. A basic understanding of data communications and networks is necessary. What You Will Find in This Manual This table summarizes the information in each chapter of this manual:
For Information On Installing the EasyLAN Wireless Refer To Chapter 1, Installing the EasyLAN Wireless. Tells you how to install the EasyLAN Wireless in your network. Configuring the EasyLAN Wireless Chapter 2, Configuring the EasyLAN Wireless. Explains how to configure the EasyLAN Wireless. Managing the EasyLAN Wireless Chapter 3, Managing the EasyLAN Wireless. Explains how to reboot, set to factory defaults, and load firmware the EasyLAN Wireless. Using the port monitor Chapter 4, Using the Port Monitor. Explains how to install and use the port monitor. Troubleshooting the EasyLAN Wireless Console commands Chapter 5, Troubleshooting the EasyLAN Wireless. Provides general troubleshooting information. Appendix A, Console Commands. Explains how to send console commands to the EasyLAN Wireless, and lists the commands. ix EasyLAN Wireless Users Manual Terminology You should be aware of how these terms are being used in this manual:
Term EasyLAN Wireless Description The wireless server for Intermec printers. 3400 4420/4440 The EasyCoder 3400 printer. The EasyCoder 4420/4440 printer. 501XP/601XP EasyLAN Software The free utility for configuring the EasyLAN Wireless. The EasyCoder 501XP/601XP. Web browser interface The HTML pages that you can use to configure and manage the EasyLAN Wireless. Format Conventions for Input From a Keyboard or Keypad This table describes the formatting conventions for input from PC or host computer keyboards and device keypads:
Convention Special text Italic text Bold text Description Shows the command as you should enter it into the device. See Format Conventions for Commands later in this chapter. Indicates that you must replace the parameter with a value. See Format Conventions for Commands later in this chapter. Indicates the keys you must press on a PC or host computer keyboard. For example, press Enter means you press the key labeled Enter on the PC or host computer keyboard. Format Conventions for Commands This manual includes sample commands that are shown exactly as you should type them on your device. The manual also describes the syntax for many commands, defining each parameter in the command. This example illustrates the format conventions used for commands:
From the command line in HyperTerminal, type:
set en wep keyval value where value is the hexadecimal value of the WEP encryption (10 hexadecimal values for 64-bit encryption or 26 hexadecimal values for 128-bit encryption) This table defines the conventions used in this manual:
Convention Special font Italic text Description Commands appear in this font. You enter the command exactly as it is shown. Italics indicate a variable, which you must replace with a real value, such as a number, filename, or keyword. x Command Conventions (continued) C 39Before You Begin Convention
Required parameters where Description Brackets enclose a parameter that you may omit from the command. Do not include the brackets in the command. If a parameter is not enclosed in brackets [ ], the parameter is required. You must include the parameter in the command;
otherwise, the command will not execute correctly. This word introduces a list of the commands parameters and explains the values you can specify for them. Other Intermec Manuals You may need additional information when working with the EasyLAN Wireless with various printers in a data collection system. Please visit our Web site at www.intermec.com to download many of our current manuals in PDF format. To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. xi blank 1 Installing the EasyLAN Wireless blank Installing the EasyLAN Wireless 1 This chapter provides an overview of the EasyLAN Wireless and explains how to install it in your network. Introducing the EasyLAN Wireless The Intermec 802.11b EasyLAN Wireless lets you communicate with 3400e, 4420, 4440, 501XP and 601XP printers from anywhere on an 802.11b wireless network. You can use the EasyLAN Wireless in ad-hoc (peer-to-peer) or infrastructure (access point) mode, as shown below. The wireless communication operates at speeds of up to 11 Mbps on any IEEE 802.11b wireless compatible network. System Requirements To print to the EasyLAN Wireless, you need an 802.11b wireless network. The wireless network must consist of one of the following:
An 802.11b wireless enabled device printing straight to the printer (ad-hoc mode). An 802.11b wireless access point allowing wireless and wired Ethernet enabled devices to print to the printer. To configure and print to the EasyLAN Wireless, you need the following information:
The MAC address of the EasyLAN Wireless (for example, 004017023F96). The following information from your network administrator:
Wireless mode (infrastructure or ad-hoc) The SSID (service set identifier) for your wireless network 1-3 EasyLAN Wireless Users Manual The radio frequency channel of the wireless network If you are using TCP/IP (recommended for Windows networks) and are not connected to a dynamic host configuration protocol (DHCP) server, you need a unique IP address for the EasyLAN Wireless (for example, 192. 168.1.14). If the EasyLAN Wireless is not on the same IP subnet as the devices you are printing from, you also need a subnet mask and a router (default gateway) address. Supported Operating Systems and Network Protocols Windows 95, 98, ME, NT 4, 2000, XP TCP/IP LPD/LPR Raw TCP/IP (port 9100) NetBIOS over IP (with SMB) Multiple configurable TCP port numbers TELNET WINS DHCP IPX/SPX NetWare RPrinter Bindery mode NetWare PServer Bindery mode NetWare NPrinter NDS mode with NDPS support NetWare PServer NDS mode Ethernet II, 802.3, 802.2, 802.2 SNAP Frame types Compatible with PCONSOLE, NWADMIN, PRINTCON, and other Novell utilities NetBEUI Unix 1-4 Installing the EasyLAN Wireless 1 Understanding the EasyLAN Wireless Before you install the EasyLAN Wireless, you should identify the following components on the back of your printer:
picture of the back of the printer with the following components called out Component Antenna connector Test switch Description Attach the antenna to this connector. Press down this switch for less than 5 seconds to print a test label on the printer. The test label shows the current wireless and network settings of the EasyLAN Wireless. Press the switch down for more than 5 seconds to reset the EasyLAN Wireless to its factory default parameters. If you hold the test switch down upon powering up, the wireless print option powers up in ad-hoc mode on RF channel 11 with the SSID of printer. Note: If you press the test switch for more than 5 seconds, only the EasyLAN Wireless is reset to the factory defaults. The rest of the printer settings remain unchanged. LEDs Serial port
(DB9) The green LED comes on when the wireless print option is powered on and then goes out. The yellow LED comes on solid when a wireless network link is established. The green LED blinks during wireless network activity. Use this port for connecting a serial device. You can also use this port to access the command line console of the EasyLAN Wireless for configuration and diagnostics. 1-5 EasyLAN Wireless Users Manual Installing the EasyLAN Wireless Before you install the EasyLAN Wireless, make sure that you have properly installed the 802.11b wireless equipment and software you are using to communicate to the printer as described in the documentation that came with that equipment. Also make sure that you have loaded media and ribbon into the printer. For help, see the quick start guide for your printer. Attaching the Antenna Screw the antenna onto the antenna connector, and bend the antenna so that it points up. illustration of antenna being attached For best performance, position the printer and antenna so that the antenna has a line-of-
sight exposure to the access point or wireless device that it communicates with. The following antennas and extension cable are also available:
illustration of antenna illustration of antenna illustration of extension cable 2.4GHz 5dBi dual flat patch, recommended for office corridors, hospital halls, and retail establishments. Part No. 067262 2.4GHz 5dBi omnidirectional, recommended for open areas, warehouses, and industrial sites. Designed for outdoor use. Part No. 063363 12-foot long cable with magnetic base at the antenna connector. Use with the antenna that came with the EasyLAN Wireless. Part No. 060749 1-6 Installing the EasyLAN Wireless 1 Starting and Testing the EasyLAN Wireless When the EasyLAN Wireless is powered on, the option goes through the following startup sequence:
The EasyLAN Wireless runs through a set of power-up diagnostics for a few seconds. If the EasyLAN Wireless is operating properly, the yellow and green LEDS blink momentarily and then go out. If the green LED blinks continuously in a regular pattern, there is a problem. Try unplugging the power to the printer and then plugging it in again. If the problem persists, contact your local Intermec representative. When a successful connection is made to the EasyLAN Wireless from another 802.11b wireless device like an access point or PC, the yellow LED stays lit. The green LED blinks whenever there is wireless networking activity. After the green and yellow LEDs go out, print a test label to make sure that the wireless print option is working. The test label shows the current wireless and network settings of the EasyLAN Wireless. To print a test label Press and release the test switch. For help finding the test switch, see Understanding the EasyLAN Wireless earlier in this chapter. If you cannot print a test page, see Chapter 5, Troubleshooting. Connecting the EasyLAN Wireless to an RS-232 Serial Port To initially configure the EasyLAN Wireless, you must connect it to your PC using the RS-232 serial port. The EasyLAN Wireless has one standard serial port. The serial port uses PC-compatible 9-pin male D-connectors. Note that the standard off-the-shelf 9-pin female to 25-pin male PC cables require a null modem in order to connect to most printers or terminals. The following illustration and table show the pin-outs for the serial port. 1-7 EasyLAN Wireless Users Manual Pin-Out for Serial Port DB9 Pin 1 2 3 4 5 6 7 8 9 Input Signal Not used Receive Data Transmit Data DTR out Output Signal Not used Transmit Data Receive Data DSR in Signal Ground Signal Ground DSR in RTS out CTS in Not used STR out CTS in RTS out Not used DTE Pin
DCE Pin
2 3 6 7 20 5 4
3 2 20 7 7 4 5
Basically, the cable must connect input signals (such as Receive Data) on the EasyLAN Wireless to the equivalent output signals (such as Transmit Data) on the PC and vice-
versa. You can set the serial port to operate in console mode to allow you to configure and diagnose the EasyLAN Wireless via a PC running HyperTerminal. To enable the console mode manually, unplug the power supply from the EasyLAN Wireless, hold down the test switch, and simultaneously plug in the power supply. The port remains in console mode until you power off the EasyLAN Wireless. You may also enable console mode by connecting remotely to the EasyLAN Wireless via the Web browser interface, TELNET, NCP, or XConfig. For more information about using console mode, see Chapter 2, Configuring the EasyLAN Wireless. Setting Radio and Network Communications Before you can set radio and network communications, you need to get the following information from your network administrator:
Radio SSID Radio boot method (ad-hoc or infrastructure) Radio WEP (64-bit, 128-bit, or disabled) Radio WEP key number Radio WEP encryption value Router Static IP address for the printer Subnet mask 1-8 Installing the EasyLAN Wireless 1 To set radio and network communications 1. Make sure that your PCs serial port is set to 115200 baud. 8 data bits. No parity. 1 stop bit. 2. Connect the serial port on the EasyLAN Wireless to the serial port of your PC. 3. Open a HyperTerminal session, and press Enter to get the Local> prompt. 4. To set the radio SSID, type set en ssid mynetwork where mynetwork is the SSID for the EasyLAN Wireless, and press Enter. 5. To set the radio boot method to ad-hoc or infrastructure, type set en mo mode where mode is ad for ad-hoc, ps for pseudo ad-hoc, or in for infrastructure, and press Enter. 6. To enable WEP 64 bit, type set en wep 64, and press Enter. Or to enable WEP 128 bit, type set en wep 128, and press Enter. 7. To set the radio WEP key, type set en key# n where n is a number from 1 to 4, and press Enter. 8. To set the radio WEP encryption value, type set en wep keyval value where value is the hexadecimal value of the WEP encryption (10 hexadecimal values for 64-bit encryption or 26 hexadecimal values for 128-bit encryption), and press Enter. 9. To set the static IP address, type set ip ad to n.n.n.n where n is a number from 0 to 255, and press Enter. 10. To set the subnet mask, type set ip su n.n.n.n where n is a number from 0 to 255, and press Enter. 11. To set the router, type set ip ro n.n.n.n where n is a number from 0 to 255, and press Enter. 12. To set the boot method to static instead of DHCP, type set ip me static, and press Enter. If you are using a printer other than the 601XP, skip to Step 15. 13. 14.
(601XP only) To set the communications parameters to 57600 baud, type set port s1 sp 57600, and press Enter.
(601XP only) To disable console mode, type set port s1 co dis, and press Enter. 15. To save the changes, type save, press Enter, type ini, and press Enter. 16. Type exit and press Enter. 1-9 EasyLAN Wireless Users Manual You can now use the Web browser interface or the EasyLAN Wireless Admin utility to configure and manage the EasyLAN Wireless. For help, see Chapter 2, Configuring the EasyLAN Wireless, and Chapter 3, Managing the EasyLAN Wireless. 1-10 2 Configuring the EasyLAN Wireless blank Configuring and Managing the EasyLAN Wireless 2 This chapter explains how to configure the EasyLAN Wireless for radio and network communications. Before You Begin This chapter explains how to configure the EasyLAN Wireless using the Web browser interface, EasyLAN Wireless Admin utility, and network specific utilities, such as Novell NWAdmin utility. For information on using console commands with HyperTerminal to configure the EasyLAN Wireless, see Appendix A, Console Commands. Before you configure the EasyLAN Wireless, you need to:
Make sure that you have properly configured your PC for communication on a wireless network. If you are connecting to the printer though an access point, make sure your PC is in infrastructure mode and that it is associated with the access point. If you are printing directly to the printer without an access point, you should be in ad-hoc mode. See the documentation for your PCs wireless adapter for instructions. Note: If your PCs wireless adapter includes an option for 802.11 ad-hoc, you must select it if you want to use the printer in ad-hoc mode. If it does not include this option, select Ad-hoc Computer-to-Computer or whatever mode your adapter uses to communicate on a wireless network without an access point. If you are using WEP encryption on your wireless network, temporarily disable WEP on your PC in order to configure the EasyLAN Wireless using the EasyLAN Wireless Admin utility. If you are using an access point with WEP enabled and it does not allow non-WEP clients to communicate with other non-WEP clients, then you also need to temporarily change the wireless mode of your PC to ad-hoc. Note: If no PCs on your network can be set to ad-hoc mode, you need to temporarily disable WEP on your access point. When you are done configuring the EasyLAN Wireless, you can re-enable WEP on your access point and change the wireless mode back if necessary. If you are using TCP/IP, note your PCs IP address. The EasyLAN Wireless needs to be on the same IP segment as the other nodes on your network in order to communicate. If you are using infrastructure mode, make sure you have a good signal between your computer and the access point. Most wireless adapters have a utility that shows the wireless signal strength. See your PCs wireless adapters documentation for details. If you are using a home gateway or router, configure the EasyLAN Wireless from a PC on the same network segment that you want the EasyLAN Wireless to be on. 2-3 EasyLAN Wireless Users Manual Configuring the TCP/IP Parameters You can use the Web browser interface or the EasyLAN Wireless Admin utility to configure the following TCP/IP parameters:
Enable or disable TCP/IP Enable port services Gateway or router IP address Boot method Subnet mask IP address Note: If you are using DHCP on your network, the EasyLAN Wireless may have automatically acquired valid IP settings, and no further configuration is necessary. Using DHCP may work well if your DHCP server allows the EasyLAN Wireless to keep its IP address permanently, but in most cases, you want to use a static IP address outside the range reserved for DHCP (see your DHCP server manual for details). You want a static IP address for when you configure your printer port and to use the Web browser interface. Using the Web Browser Interface Before you can use the Web browser interface, you need to open it. To open the Web browser interface 1. Start your Web browser. 2. In the Address (Internet Explorer) or Go to (Netscape) line, enter the IP address for the EasyLAN Wireless, and press Enter. The following page appears. 2-4 Configuring and Managing the EasyLAN Wireless 2 Access Password Page 3. In the Print Server Access Password field, enter the password. The default password is access. 4. Click Submit. The Configuration and Management page appears. 2-5 EasyLAN Wireless Users Manual You are now ready to configure the TCP/IP parameters. To configure the TCP/IP parameters using the Web browser interface 1. From the Configuration and Management page, click Configure TCP/IP. The Configure TCP/IP page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this section. 2. 3. 4. 5. 6. In the TCP/IP row, select Enable or Disable. In the Enabled Services row, click the port you want to configure services for. For help, see Configuring Port Services later in this chapter. In the IP Address field in the IP Address row, enter the IP address for the EasyLAN Wireless using the form n.n.n.n where n is from 0 to 255. After you click Submit, you will have to enter the new IP address in the Address/Go to line of your browser to get the Web browser interface back. In the Subnet Mask field in the IP Address row, enter the subnet mask that the printer is communicating in using the form n.n.n.n where n is from 0 to 255. In the Gateway field in the IP Address row, enter the IP address of the gateway or router your EasyLAN Wireless communicates with. 2-6 Configuring and Managing the EasyLAN Wireless 2 7. In the Boot Method dropdown list in the IP Address row, select the method for finding the EasyLAN Wireless IP address, subnet mask, and gateway address when the EasyLAN Wireless powers on or is reset:
Auto sets the EasyLAN Wireless to try to get an IP address using DHCP, BOOTP, and RARP. If it cannot get an IP address using these methods, Auto changes to Static. DHCP sets the EasyLAN Wireless to use the dynamic host configuration protocol to get an IP address. BOOTP sets the EasyLAN Wireless to use boot protocol to get an IP address. RARP sets the EasyLAN Wireless to use reverse address resolution protocol to get an IP address. Static sets the EasyLAN Wireless to use the IP address set in the IP Address field whenever it boots. In the Boot Tries field in the IP Address row, enter the number of times the boot method tries to set the IP address, subnet mask, and gateway address before using the available values. This field is only used if the boot method is set to Auto, DHCP, BOOTP, or RARP. What is the range of valid values for this field?
In the RARP Boot Settings row, select whether RARP sets the subnet mask based on the EayLAN Wireless IP address and sets the gateway IP address. To use these settings, set the boot method to RARP or Auto. In the TCP Window row, enter the maximum TCP window for TCP communications. Normally this value is set automatically, but you may want to change it to optimize network performance. What is the range of valid values for this field?
In the TCP Timeout row, enter how many minutes or seconds a TCP job can be idle before the job is terminated. If you set the timeout to zero, the TCP job can be idle indefinitely. What is the range of valid values for this field?
In the LPD Banner Enable check box in the LPD Settings row, check the check box to have the EasyLAN Wireless print the banner page in an LPD control file. In the LPD Retry Enable check box in the LPD Settings row, check the check box to have the EayLAN Wireless wait for an LPD job that has been terminated before it was completed to be resent. If the LPD job is resent, the EasyLAN Wireless continues printing the job where it had stopped. In the Keepalive Timer row, enter how often in minutes the EasyLAN Wireless sends an IP ping packet to the router to keep the router aware of the EasyLAN Wireless. Enter zero to disable this feature. In the Probe Idle Connections row, select Enable to have the EasyLAN Wireless send a probe packet on TCP connections with no data traffic. If the EasyLAN Wireless does not receive an acknowledgement, it closes the connection. 8. 9. 10. 11. 12. 13. 14. 15. 2-7 EasyLAN Wireless Users Manual 16. In the TCP Receive Checksum row, select Enable to compute the TCP checksum on received packets. Disabling this feature can enhance performance, but data corruption will not be checked. 17. Click Submit. A page appears letting you know that your changes were successful. 18. Click OK to return to the Configuration and Management page. Using the EasyLAN Wireless Admin Utility Before you can use the WPAdmin utility, you need to install it and then search for the EasyLAN Wireless. To install the WPAdmin utility 1. Place the printer CD-ROM in your PCs CD-ROM drive. The following screen appears. 2. Click Software in the left frame. The Software page appears. 2-8 Configuring and Managing the EasyLAN Wireless 2 Printer Companion CD Software Page 3. Scroll down to EasyLAN Wireless Admin utility, and then click the picture or the link for the EasyLAN Wireless Admin utility page. 4. Click Install EasyLAN Wireless Admin utility. 5. Follow the instructions for installing the EasyLAN Wireless Admin utility. 6. When the installation is complete, close the CD-ROM screen. To search for the EasyLAN Wireless 1. Open the WPAdmin utility by selecting it from the Start menu (under Programs, Intermec then WPAdmin) or by double-clicking a short cut on your desktop. The Search dialog box appears. 2-9 EasyLAN Wireless Users Manual 2. In the Server Search box, click Start. The name of the EasyLAN Wireless, MAC address, IP address, and signal appear for all of the EasyLAN Wireless found. If the WPAdmin utility does not find your EasyLAN Wireless right away, click Stop and make sure that the EasyLAN Wireless is on and configured properly. For help with initially configuring the EasyLAN Wireless, see Setting Radio and Network Communications in Chapter 1. Note: If the wireless signal is less than 50% on the Search screen, printing performance could be affected. To improve the signal strength, try moving the EasyLAN Wireless closer to the computer or access point and away from other radio devices, such as Bluetooth wireless devices, microwave ovens, or cordless phones. You are now ready to configure the EasyLAN Wireless. To configure the TCP/IP parameters using the EasyLAN Wireless Admin utility 1. Open the WPAdmin utility and search for the EasyLAN Wireless on your network. For help, see the previous procedure, To search for the EasyLAN Wireless. 2. Select an EasyLAN Wireless and click Configure. The Configure Password dialog box appears. 3. Enter the password for the EasyLAN Wireless. The default password is access. The Configuration dialog box appears. 2-10 Configuring and Managing the EasyLAN Wireless 2 Configuration Dialog Box Note: The Serial Number field, Firmware Rev. field, and MAC Address field are read only fields. You cannot change the values of these fields. 4. 5. 6. 7. 8. In the Server Name field, enter the name for the EasyLAN Wireless. The default name is XCD_xxxxxx where xxxxxx is the last six digits of the MAC address. In the Password field, enter the password that you use to access this Configuration dialog box. In the IP Address field, enter the IP address for the EasyLAN Wireless in the form n.n.n.n where n is a number from 0 to 255. In the Workgroup/Domain field, enter the Microsoft Workgroup or Domain that prints to this printer. If your network uses NetBIOS or NetBEUI, enter the name of the PC that prints to this printer. In the Subnet Mask field, enter the subnet mask that the EasyLAN Wireless communicates in using the form n.n.n.n where n is a number from 0 to 255. 9. From the Boot Method dropdown list, select one of the following options:
Auto sets the EasyLAN Wireless to try to get an IP address using DHCP, BOOTP, and RARP. If it cannot get an IP address using these methods, Auto changes to Static. DHCP sets the EasyLAN Wireless to use the dynamic host configuration protocol to get an IP address. 2-11 EasyLAN Wireless Users Manual BOOTP sets the EasyLAN Wireless to use boot protocol to get an IP address. RARP sets the EasyLAN Wireless to use reverse address resolution protocol to get an IP address. Static sets the EasyLAN Wireless to use the IP address set in the IP Address field whenever it boots. 10. In the Gateway field, enter the address for the gateway or router that the EasyLAN Wireless communicates through to other subnets using the form n.n.n.n where n is a number from 0 to 255. 11. From the Data Rate dropdown list, select the throughput speed for the Ethernet connection (1, 2, 5.5, or 11 Mbps). 12. Click OK to accept your changes and return to the Search screen. Click Cancel to reject your changes and return to the Search screen. Note: If you are having trouble configuring an EasyLAN Wireless, click Cancel in the Configuration screen. In the Search screen, click Clear to clear the list of print servers, and start a new search. For help searching for the EasyLAN Wireless, see To search for the EasyLAN Wireless earlier in this chapter. For configuring the rest of the parameters in the Configuration screen, see Using the EasyLAN Wireless Admin Utility in the next section. Configuring the Radio Parameters You can use the Web browser interface or the EasyLAN Wireless Admin utility to configure the following radio parameters:
Channel SSID Mode Speed WEP 2-12 Configuring and Managing the EasyLAN Wireless 2 Using the Web Browser Interface You need to open the Web browser interface before you can use it. For help, see To open the Web browser interface earlier in this chapter. To configure the radio parameters using the Web browser interface 1. From the Configuration and Management page, click Configure Radio. The Configure Radio page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2. 3. 4. In the Channel field, enter a channel number from 1 to 11, or enter 0 to have the system automatically select the proper channel. In the SSID field, enter the SSID for the EasyLAN Wireless. In the Mode field, select the mode your network is using to communicate:
Choose Auto mode to have the EasyLAN Wireless select the appropriate mode based on what network activity is happening at the time. Choose Pseudo Ad-hoc mode when your network has some stations without access points. Choose Ad-hoc (802.11) mode when all of the stations on the network are IEEE 802.11 compliant. Choose Infrastructure mode when all data is being passed through a central access point. 2-13 EasyLAN Wireless Users Manual 5. 6. 7. 8. In the Speed field, select the speed of your network: 1, 2, 5.5, or 11 Mbps. In the WEP field, select the WEP security your network is using: disabled, 64-bit encryption, or 128-bit encryption. In the Key Selection field, select the WEP key your network is using: 1, 2, 3, or 4. In the 64 Bit WEP Key fields or the 128 Bit WEP Key fields, enter the hexadecimal digits for each key: 10 digits for 64-bit encryption and 26 digits for 128-bit encryption. 9. Click Submit. A page appears letting you know that your changes were successful. 10. Click OK to return to the Configuration and Management page. Using the EasyLAN Wireless Admin Utility Before you can configure the radio parameters using the EasyLAN Wireless Admin utility, you need to install the utility and search for the EasyLAN Wireless. For help, see To install the EasyLAN Wireless Admin Utility and To search for the EasyLAN Wireless earlier in this chapter. To configure the radio parameters using the EasyLAN Wireless Admin utility 1. Open the WPAdmin utility and search for the EasyLAN Wireless on your network. For help, see To search for the EasyLAN Wireless earlier in this chapter. 2. Select an EasyLAN Wireless and click Configure. The Configure Server Password dialog box appears. 3. Enter the password for the EasyLAN Wireless. The default password is access. The Configuration dialog box appears. 2-14 Configuring and Managing the EasyLAN Wireless 2 Configuration Dialog Box Note: The Serial Number field, Firmware Rev. field, and MAC Address field are read only fields. You cannot change the values of these fields. 4. 5. In the Server Name field, enter the name for the EasyLAN Wireless. The default name is XCD_xxxxxx where xxxxxx is the last six digits of the MAC address. In the Password field, enter the password that you use to access this Configuration dialog box. 6. From the RF Channel dropdown list, select the wireless channel (0 to 11) the EasyLAN Wireless uses to communicate. 7. In the SSID field, enter the service set identifier for the subnetwork. 8. From the Wireless Mode dropdown list, select one of the following options:
Auto. Select this mode to have the EasyLAN Wireless select the appropriate mode based on what network activity is happening at the time. Pseudo Ad-hoc. Select this mode when your network has some stations without access points. Ad-hoc. Select this mode when all of the stations on the network are IEEE 802.11 compliant. Infrastructure. Select this mode when all data is being passed through a central access point. 2-15 EasyLAN Wireless Users Manual 9. From the WEP Key dropdown list, select either disabled, 64-bit, or 128-bit wired equivalent privacy. If you selected disabled, skip to Step 12. 10. From the WEP Key Index dropdown list, select the 64-bit or 128-bit key you are using. 11. In the 64 Bit Key fields or the 128 Bit Key fields, enter the hexadecimal digits for each key: 10 digits for 64-bit encryption and 26 digits for 128-bit encryption. 12. Click OK to accept your changes and return to the Search screen. Click Cancel to reject your changes and return to the Search screen. Note: If you are having trouble configuring an EasyLAN Wireless, click Cancel in the Configuration screen. In the Search screen, click Clear to clear the list of print servers, and start a new search. For help searching for the EasyLAN Wireless, see To search for the EasyLAN Wireless earlier in this chapter. To configure the other parameters in the Configuration screen, see Using the EasyLAN Wireless Admin Utility in the previous section. Configuring the Access and Update Passwords Use the Web browser interface to configure the access and update passwords. The default passwords are access. The access password is the password you use to get to the Configuration page of the Web browser interface. The update password is the password you use to reload the firmware. To configure the access and update passwords 1. From the Configuration and Management page, click Configure Password. The Configure Password page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2-16 Configuring and Managing the EasyLAN Wireless 2 Configure Password Page 2. Click Configure Access Password. The Configure Access Password page appears. 3. Enter the access password in both fields. 2-17 EasyLAN Wireless Users Manual 4. Click Submit. A page appears letting you know that your changes were successful. 5. Click OK to return to the Configuration and Management page. 6. Repeat Steps 1 through 5 for the update password. The Configure Update Password page is shown next. Configuring the Ports Use the Web browser interface to configure the following port parameters:
Output mode Bidirectional communication ECP Software I/O To configure the ports 1. From the Configuration and Management page, click Configure Port. The Configure Port page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2-18 Configuring and Managing the EasyLAN Wireless 2 Configure Port Page 2. Click the port name for the port you want to configure. The following page appears. 3. Read the first three rows to find out what jobs are in the port, the status of the port, and the port name. 2-19 EasyLAN Wireless Users Manual 4. 5. 6. 7. 8. 9. In the Port Type row, select Console to send console commands to the EasyLAN Wireless through the serial port, or select Print Server to print to the EasyLAN Wireless. In the Baud Rate row, select the baud rate for the port. In the Bits per character row, select 7 or 8 bits. In the Stop Bits row, select 1 or 2 stop bits. In the Parity row, select None, Odd, Even, Mark, or Space. In the Flow Control row, select None, XON/XOFF, or RTS/CTS. 10. Click Submit. A page appears letting you know that your changes were successful. 11. Click OK to return to the Configuration and Management page. Configuring the Port Services Use the Web browser interface to configure port services. If you clicked on a service name in a network parameter page, such as Configure Netware, go to Step 3. To configure the port services 1. From the Configuration and Management page, click Configure Services. The Configure Service screen appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2-20 Configuring and Managing the EasyLAN Wireless 2 2. Click the service name for the service you want to configure. The following page appears. 3. 4. 5. 6. 7. 8. 9. In the Service Name row, enter the name for the service. In the Service Port row, select the port the service runs on. In the Protocols row, choose the protocols the service uses to communicate. 0, no filter: data passes unmodified 1, text substitution: default is CRLF for LF In the Filter row, select the data filter the service uses:
3, converts normal text to PostScript 4, converts output data to PostScript Tagged Binary 2, not used In the Priority row, enter the priority. What is the range of valid values for this field?
In the Control Strings row, select the data strings for the beginning of a job and end of a job. In the NetWare row, check the Queue Server radio button to configure the EasyLAN Wireless to fetch print jobs directly from the Netware print queues 2-21 EasyLAN Wireless Users Manual 10. In the NetWare row in the NDS Tree field, enter the name of the organizational tree and enter the context for your NetWare network. To configure the EasyLAN Wireless for Netware Directory Services, check the Queue Server radio button and enter an NDS tree name and context for the EasyLAN Wireless. To disable NDS support, leave the NDS Tree field and the NDS Context field blank. 11. In the NetWare row in the NDS Context field, enter the organizational unit(s) that you configured for the EasyLAN Wireless using NWAdmin or PCONSOLE. To disable NDS support, leave the NDS Tree field and the NDS Context field blank. 12. To configure either bindery file servers or service bindery file servers, click either Configure Bindery File Servers or Configure Service Bindery File Servers. For help, see the next procedure, To configure bindery file servers and service bindery file servers. 13. 14. 15. 16. 17. 18. In the NetWare row, check the Remote Printer radio button if you have a NetWare print server loaded on the file server or workstation. In the NetWare row in the Printer Number field, enter the number for the printer. What is the range of valid values for this field? And what does this number mean?
In the NetWare row in the Printer Server field, enter the name of the NetWare print server. Do you need to add path information or other context?
In the Raw TCP Port row, enter the TCP port to be used with this service. What is the range of valid values for this field?
In the Service Options row, check the Bi-Directional radio button to have the service send data back from the printer to the network. Normally you should not need to change this. In the Service Options row, check the Queued (TCP) radio button with the Raw TCP Port defined to have the EasyLAN Wireless queue jobs sent to that port. If not checked, the EasyLAN Wireless rejects jobs if the EasyLAN Wireless is currently busy with another job 19. Click Submit. A page appears letting you know that your changes were successful. 20. Click OK to return to the Configuration and Management page. To configure bindery file servers service bindery file servers 1. In the Active Servers and Queues row of the Configure NetWare page or the NetWare row of the Configure Services page, click Configure Bindery File Servers or click Configure Service Bindery File Servers. The Configure Bindery File Servers page or Configure Service Bindery File Servers page appears. 2-22 Configuring and Managing the EasyLAN Wireless 2 Configure Bindery File Servers Page Configure Service Bindery File Servers Page 2-23 EasyLAN Wireless Users Manual 2. If you want to remove a server, select a server from the dropdown list and click Remove. 3. If you want to add a server, enter a server number in the field and click Add. 4. Click Back in your browser toolbar to return to the previous page. Or click Main to return to the Configuration and Management page. Configuring for the NetWare Network This section explains how to use the Web browser interface to configure NetWare parameters and how to configure additional queues using the Novell NWAdmin utility. Note: Intermec recommends you use the Novell 32-bit client on your Windows PC instead of the Microsoft NetWare client because it allows direct configuration of print queues without the need for a Novell utility like NWAdmin or PCONSOLE. The EasyLAN Wireless automatically makes itself known on a NetWare network. The default NetWare Print Server name is XCD_xxxxxx_P1 where xxxxxx is the last six digits of the MAC address. Note that the NetWare Print Server name is used for either NDS or bindery mode configuration. If you are configuring the first port with the Web browser interface, the NDS Printer Name for this port is automatically assigned as XCD_xxxxxx_P1 where xxxxxx is the last six digits of the MAC address. If you are using an alternate configuration method like NWAdmin, you may assign any unique name for the printer. For help configuring the first port, see Configuring the Ports earlier in this chapter. You extensively use the Print Server and Printer names while configuring. Note that these names are actually the names of the EasyLAN Wireless NetWare services. If desired, you can change the default names using the Web browser interface. For help, see Configuring the Port Services earlier in this chapter. 2-24 Configuring and Managing the EasyLAN Wireless 2 Configuring the NetWare Parameters 1. From the Configuration and Management page, click Configure NetWare. The Configure NetWare screen appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this section. 2. In the Netware row, select Enable or Disable. 3. To configure services for the port shown in the Enabled Services row, click the link for the port. For help, see Configuring Port Services later in this chapter. 4. Read the information in the Active Servers and Queues row to find out what servers and queues are enabled. 5. To configure bindery file servers, click Configure Bindery File Servers. For help, see To configure bindery file servers and service bindery file servers in the previous section. 6. 7. In the Frame Type field, select the frame type: Auto, 802.3, Ethernet II, 802.2, or SNAP. In the Netware Password row, enter the password the EasyLAN Wireless uses to communicate with the file server in the Enter new password field and Confirm new password field. To disable the password, enter a single space. 8. Click Submit. A page appears letting you know that your changes were successful. 9. Click OK to return to the Configuration and Management page. 2-25 EasyLAN Wireless Users Manual Configuring Additional Queues If you want to configure additional queues, you must use the Novell NWAdmin utility
(this program is usually found in the Public directory on the NetWare file server). To configure additional queues and ports 1. Start the NWAdmin utility and make sure you are in the right context. (If not, select NDS Browser from the Tools menu and then browse for the desired context.) 2. Select the container where you want the print queue to reside. 3. From the Tools menu, select Print Services Quick Setup. 4. Browse for the NetWare Print Server by clicking on the button next to the Print Server Name window. 5. Enter the name of the NDS Printer for the desired port in the Name box (for example, XCD_04ECBA_P1). 6. Leave the Type box at the default Parallel setting. 7. Select the desired banner type. 8. Enter any desired name for the print queue. 9. If necessary, browse for the volume. 10. Click Create to create the print queue. You are now ready to use the queue from a NetWare workstation. Configuring for NetBIOS Use the Web browser interface to configure for NetBIOS. To configure for NetBIOS 1. From the Configuration and Management page, click Configure NetBIOS. The Configure NetBIOS page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2-26 Configuring and Managing the EasyLAN Wireless 2 Configure NetBIOS Page 2. 3. 4. In the NETBEUI row, select Enable to enable communication over the LLC protocol. In the NETBIOS/IP row, select Enable to enable communication over the Internet protocol. In the Enabled Services row, click the displayed port to configure the services for that port. For help, see Configuring Port Services later in this chapter. 5. Read the name of the EasyLAN Wireless from the Computer Name row. 6. 7. In the Domain Name row, enter the name of the domain that contains the PCs that will print to this printer. In the WINS Server Method row, select the server method:
Set to Auto to use DHCP to set the primary and secondary WINS server IP addresses. To use DHCP, you must set the boot method in the Configure TCP/IP page to either Auto or DHCP. Set to Static to always use the values you enter in the Primary WINS Server IP Address row and Secondary WINS Server IP Address row. To disable WINS registration, select Static and set the primary and secondary WINS server IP addresses to 0.0.0.0. 8. In the Primary WINS Server IP Address row, enter the IP address for the primary WINS server. 2-27 EasyLAN Wireless Users Manual 9. In the Secondary WINS Server IP Address row, enter the IP address for the optional secondary WINS server. 10. Click Submit. A page appears letting you know that your changes were successful. 11. Click OK to return to the Configuration and Management page. Configuring the DLC Parameters Use the Web browser interface to configure the DLC parameters. To configure the DLC parameters 1. From the Configuration and Management page, click Configure DLC. The Configure DLC page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2. 3. In the DLC row, select Enable or Disable. In the Enabled Services row, click the port you want to configure services for. For help, see Configuring Port Services earlier in this chapter. 4. Click Submit. A page appears letting you know that your changes were successful. 5. Click OK to return to the Configuration and Management page. 2-28 Configuring and Managing the EasyLAN Wireless 2 Configuring for UNIX The EasyLAN Wireless appears to the network as a UNIX host computer with a unique IP address running the line printer daemon (lpd) protocol. As a result, any host computer that supports the Berkeley remote-LPR command can spool jobs to the EasyLAN Wireless without the need for any special software on the host computer. Note: Before you configure a UNIX print queue, the EasyLAN Wireless must have a valid IP address. Configuring for a Berkeley UNIX Host Berkeley UNIX host computers include Linux, Digital Equipment Corporation Digital UNIX, OSF/1, and ULTRIX; Compaq Tru64 UNIX; SunOS (not Solaris), SCO UNIX;
and many others. Sun Solaris, HP/UX, and IBM AIX users should skip to the appropriate sections later in this chapter. Note: Do not use the Linux X-Windows graphical user interface printer configuration utility because it does not work with the EasyLAN Wireless. Instead, Linux users should follow the configuration steps listed in this section. Note: SCO UNIX users should use the ripconf command to create a printer and automatically configure the /etc/printcap file (you still need to edit the /etc/hosts file). Enter the EasyLAN Wireless service name (XCD_xxxxxx_P1 where xxxxxx is the last six digits of the MAC address) as the name of the printer (refer to the EasyLAN Wireless test label for the exact name of this service), and enter the name of the EasyLAN Wireless that you assigned that you assigned in the /etc/hosts file as the remote host name. Note the because this name must be unique for each printer, we recommend using the XCD_xxxxxx_P1 service instead of the normal BINARY_P1 service. To configure for a Berkeley UNIX host 1. Edit the /etc/hosts file (or equivalent local host table). For example:
192.189.207.33 xcdprinter 2. Edit the printcap file. For example:
LabelPrinter:\
:lp=:\
: rm=XCD:\
:rp=BINARY_P1:\
:sd=/usr/spool/LabelPrinter:
2-29 EasyLAN Wireless Users Manual where:
LabelPrinter is the queue name. XCD matches the name in the hosts file. BINARY_P1 is the EasyLAN Wireless service name. Use TEXT_P1 instead of BINARY_P1 for text files. sd is the spool directory. 3. Create the spool directory. The lpd spool directory is usually located in the
/usr/spool directory. To create a new spool directory, use the mkdir command. For example:
mkdir /usr/spool/lpd/LabelPrinter 4. Print using the standard lpr command:
lpr PLabelPrinter filename 5. For AT&T based UNIX systems, such as SCO, use the standard lp command:
lp dLabelPrinter filename Configuring for Sun Solaris To use an EasyLAN Wireless with Sun Solaris, first use the Host Manager in the Admintool utility to add the EasyLAN Wireless IP address and name to the /etc/hosts file. To use the Host Manager to add the EasyLAN Wireless IP address 1. Open Host Manager in the Admintool utility. For help, see the documentation for your Sun Solaris system. 2. Click None Use /etc files on host. 3. Click Apply. 4. Click Edit, and then click Add Host. 5. Enter the EasyLAN Wireless name as the Host Name (this name is anything you want, but should not have an underscore (_) character in it). 6. Enter the IP address and MAC address of the EasyLAN Wireless (the MAC address has the format aa:bb:cc:dd:ee:ff). 7. Click Add. 8. Close the Host Manager windows. Now you are ready to use the Printer Manager in the Admintool utility. 2-30 Configuring and Managing the EasyLAN Wireless 2 To use the Printer Manager 1. Open the Printer Manager under Open Windows in the Admintool utility. For help, see the documentation for your Sun Solaris system. 2. Select Edit. 3. Select Add. 4. Select Add Access to Remote Printer. 5. At the PrinterName prompt, type any desired name for the print queue. 6. At the Printer Server prompt, type name\!servicename where:
name matches the EasyLAN Wireless name as entered in the hosts table. servicename is the print service name. For binary graphics files, use the service BINARY_P1; for text files, use the service TEXT_P1. 7. Make sure that the Print Server OS is set to BSD (this is the default setting). 8. Select Add. 9. To print, use the standard lp command:
lp dLabelPrinter filename Note: We recommend using the /etc/hosts file for the printer name rather than NIS or other name services. Due to a bug in the Sun lpd implementation on Solaris 2.4 and earlier releases, you may encounter problems printing very long print jobs. The workaround is to configure the EasyLAN Wireless as an HP JetDirect card using the HP JetAdmin for UNIX software. Solaris print queues can also be configured from the UNIX shell using the lpadmin command. Configuring for HP/UX 1. For HP/UX 10.x, open the sam program to configure the EasyLAN Wireless. 2. When you get a list of options, select Printers and Plotters. 3. Select LP Spooler. 4. Select Printers and Plotters. 5. Select Actions, and then select Add Remote Printer/Plotter. 6. Enter any name as the Printer Name (the Printer Name is the name of the print queue). 2-31 EasyLAN Wireless Users Manual 7. Enter the IP address of the EasyLAN Wireless as the Remote System Name. 8. Enter the desired EasyLAN Wireless service name (BINARY_P1 for binary files or TEXT_P1 for text files) as the Remote Printer Name. 9. Check the box next to Remote Printer is on BSD System. 10. If you choose to, accept the default values for the remaining items. 11. Click OK to configure the printer. 12. Print using the lp d command with the EasyLAN Wireless name. Note: The configuration for HP Distributed Print Services and for earlier versions of HP/UX is slightly different. You can also configure the EasyLAN Wireless as a JetDirect card using HP/UX. To do this, you need the HP UNIX Host Printing Software (part of HPs JetAdmin for UNIX). Configuring for IBM AIX 1. Using the SMIT program, enter smit and select Devices. 2. Select Printer/plotter. 3. Select Manage remote printer subsystem. 4. Select Client services. 5. Select Remote printer queues. 6. Select Add a remote queue. 7. Enter the following remote queue settings:
Name of queue to add (user selectable) Activate the queue (Yes) Destination host (EayLAN Wireless IP address; or if you have configured the
/etc/hosts file, use the name of the EasyLAN Wireless that you specified in that file) Name of queue on remote printer (BINARY_P1 for binary files or TEXT_P1 for text files) Name of device to add (user selectable; for example, lp0) 8. Print using the lp d command. 2-32 Configuring and Managing the EasyLAN Wireless 2 Note: The configuration for earlier versions of AIX is slightly different. You can also configure the EasyLAN Wireless as a JetDirect card using AIX. To do this, refer to your AIX documentation. Configuring for Other Systems You can use the EasyLAN Wireless with any computer system that supports either the lpr/lpd protocol or the HP JetDirect card (the EasyLAN Wireless parallel port is port 9100 while the serial port is port 9101). Refer to your systems documentation for information on configuring lpr/lpd or JetDirect print queues. 2-33 blank 3 Managing the EasyLAN Wireless blank Managing the EasyLAN Wireless 3 This chapter explains how to manage the EasyLAN Wireless using the Web browser interface and EasyLAN Wireless Admin utility. Rebooting the EasyLAN Wireless Use either the Web browser interface or the EasyLAN Wireless Admin utility to reboot the EasyLAN Wireless. Note: Only the EasyLAN Wireless reboots, not the entire printer. Using the Web Browser Interface Before you can use the Web browser interface, you need to open it. To open the Web browser interface 1. Start your Web browser. 2. In the Address (Internet Explorer) or Go to (Netscape) line, enter the IP address for the EasyLAN Wireless, and press Enter. The following page appears. 3. In the Print Server Access Password field, enter the password. The default password is access. 4. Click Submit. The Configuration and Management page appears. 3-3 EasyLAN Wireless Users Manual Configuration and Management Page You are now ready to manage the EasyLAN Wireless. To reboot the EasyLAN Wireless 1. From the Configuration and Management page, click Reset Server. The Reset Server page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this section. 3-4 Managing the EasyLAN Wireless 3 Reset Server Page 2. Click Submit. A screen appears telling you that the EasyLAN Wireless has been reset. 3. Click OK to return to the Configuration and Management screen. 3-5 EasyLAN Wireless Users Manual Using the EasyLAN Wireless Admin Utility Before you can use the EasyLAN Wireless Admin utility, you need to install it and then search for the EasyLAN Wireless. To install the WPAdmin utility 1. Place the printer CD-ROM in your PCs CD-ROM drive. The following page appears. 2. Click Software in the left frame. The Software page appears. 3-6 Managing the EasyLAN Wireless 3 Printer Companion CD Software Page 3. Scroll down to EasyLAN Wireless Admin utility, and then click the picture or the link for the EasyLAN Wireless Admin utility page. 4. Click Install EasyLAN Wireless Admin utility. 5. Follow the instructions for installing the EasyLAN Wireless Admin utility. 6. When the installation is complete, close the CD-ROM screen. To search for the EasyLAN Wireless 1. Open the EasyLAN Wireless Admin utility by selecting it from the Start menu
(under Programs, Intermec then EasyLAN Wireless Admin) or by double-clicking a short cut on your desktop. The Search dialog box appears. 3-7 EasyLAN Wireless Users Manual 2. In the Server Search box, click Start. The name of the EasyLAN Wireless, MAC address, IP address, and signal appear for all of the EasyLAN Wireless found. If the EasyLAN Wireless Admin utility does not find your EasyLAN Wireless right away, click Stop and make sure that the EasyLAN Wireless is on and configured properly. For help with initially configuring the EasyLAN Wireless, see Setting Radio and Network Communications in Chapter 1. Note: If the wireless signal is less than 50% on the Search screen, printing performance could be affected. To improve the signal strength, try moving the EasyLAN Wireless closer to the computer or access point and away from other radio devices, such as Bluetooth wireless devices, microwave ovens, or cordless phones. You are now ready to manage the EasyLAN Wireless. To reboot the EasyLAN Wireless 1. Open the EasyLAN Wireless Admin utility and search for the EasyLAN Wireless on your network. For help, see the previous section, Searching for EasyLAN Wireless on Your Network. 2. Select an EasyLAN Wireless, open the Set Up menu, and select Reboot. The Reboot Server Password dialog box appears. 3. Enter the password for the EasyLAN Wireless and click OK. A message box appears telling you that the EasyLAN Wireless is rebooting. When the EasyLAN Wireless has finished rebooting, the Search screen appears. Is any information lost or settings changed when option reboots?
3-8 Managing the EasyLAN Wireless 3 Setting the EasyLAN Wireless to Factory Defaults Use the Web browser interface, the EasyLAN Wireless Admin utility, or the test switch to set the EasyLAN Wireless to factory defaults. This section explains how to use the Web browser interface and the EasyLAN Wireless Admin utility. For help using the test switch, see Understanding the EasyLAN Wireless in Chapter 1. Note: Only the EasyLAN Wireless is set to factory defaults, not the entire printer. Using the Web Browser Interface 1. From the Configuration and Management page, click Set Default. The Set Default page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2. Click Submit. A screen appears telling you that the EasyLAN Wireless is set to factory defaults. Note: The access and update passwords have been set to the factory default of access. 3. Click Main to return to the Configuration and Management screen. 3-9 EasyLAN Wireless Users Manual Using the EasyLAN Wireless Admin Utility Note: The password for the EasyLAN Wireless is set to access when the EasyLAN Wireless is set to factory defaults. 1. Open the EasyLAN Wireless Admin utility and search for the EasyLAN Wireless on your network. For help, see To search for the EasyLAN Wireless earlier in this chapter. 2. Select an EasyLAN Wireless, open the Set Up menu, and select Reset. The Reset Defaults Password dialog box appears. 3. Enter the password for the EasyLAN Wireless and click OK. A message box appears telling you that the EasyLAN Wireless is being set to factory defaults. When the EasyLAN Wireless is set to factory defaults, the Search screen appears. Printing a Test Label Use the Web browser interface, the EasyLAN Wireless Admin utility, or the test switch to print a test label. This section explains how to use the Web browser interface and the EasyLAN Wireless Admin utility. For help using the test switch, see Understanding the EasyLAN Wireless in Chapter 1. Using the Web Browser Interface Note: The test label is sent to the printer when you click Print Test Label. 1. From the Configuration and Management page, click Print Test Label. A screen appears telling you that the test label has been sent to the printer. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2. Click Main to return to the Configuration and Management screen. 3-10 Managing the EasyLAN Wireless 3 Using the EasyLAN Wireless Admin Utility 1. Open the EasyLAN Wireless Admin utility and search for the EasyLAN Wireless on your network. For help, see To search for the EasyLAN Wireless earlier in this chapter. 2. Select an EasyLAN Wireless, open the Set Up menu, and select Test Page. The Print Test Page Password dialog box appears. 3. Enter the password for the EasyLAN Wireless and click OK. A message box appears telling you that the test label has been printed. 4. Click OK. The Search screen appears. Reloading Firmware Use the Web browser interface to reload firmware. To reload firmware 1. From the Configuration and Management page, click Reload Firmware. The Reload Firmware page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 3-11 EasyLAN Wireless Users Manual Reload Firmware Page 2. 3. 4. 5. In the Reload on submit row, choose Enable to reload the firmware when you click submit. If you choose Disable, the firmware is reloaded when you reboot the EasyLAN Wireless (Guess on my part). For help, see Rebooting the EasyLAN Wireless earlier in this chapter. In the Firmware File Name row, enter the file name for the firmware. Do you need to enter path information?
In the TFTP Server Address row, enter the IP address for the TFTP server in the form n.n.n.n where n is from 0 to 255. Is the firmware supposed to be on the TFTP server?
In the Netware Server Name row, enter the name of the Netware server. Why is this information needed?
6. Click Submit. If you enabled reload on submit, the firmware is sent to the EasyLAN Wireless, and a message page appears letting you know the reload was successful. If you disabled reload on submit, a message page appears letting you know that the firmware is ready to load. 7. Click OK to return to the Configuration and Management page. If you need to reset the EasyLAN Wireless, see Resetting the EasyLAN Wireless later in this chapter. 3-12 Managing the EasyLAN Wireless 3 Viewing Ethernet Statistics Packets received This Web browser interface page provides the following information:
Bytes received Bad Packets received Receiver overruns Packets transmitted Bytes transmitted Packet collisions Transmit packet fail Transmit error mask AP MAC address To view Ethernet statistics 1. From the Configuration and Management page, click Ethernet Statistics. The Ethernet Statistics page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this chapter. 2. Click Main to return to the Configuration and Management screen. 3-13 EasyLAN Wireless Users Manual Other EasyLAN Wireless Admin Utility Functions configure IP subnets. You can also use the EasyLAN Wireless Admin tool to add servers. load files. save files. Configuring IP Subnets 1. Open the EasyLAN Wireless Admin utility and search for the EasyLAN Wireless on your network. For help, see To search for the EasyLAN Wireless earlier in this chapter. 2. Open the Set Up menu and select IP Subnet. The IP Subnets dialog box appears. 3. To change a subnet, select the subnet and click Edit. The Edit Subnet dialog box appears. To add a subnet, click New. The Edit Subnet dialog box appears. 4. In the Name field, enter the name of the subnet. 3-14 Managing the EasyLAN Wireless 3 5. In the Address field, enter the IP address of the subnet in the form n.n.n.n where n is from 0 to 255. 6. Check or clear the Enabled check box. 7. Click OK to accept your changes and return to the IP Subnet dialog box. Or click Cancel to reject your changes and return to the IP Subnet dialog box. 8. To delete a subnet, select the subnet and click Delete. The subnet disappears from the IP Subnet dialog box. 9. To print a list of subnets, click Print, select the print options you want, and click OK. 10. When you have finished configuring the subnets, click Done. The Search screen appears. Adding an EasyLAN Wireless If you know you will be bringing an EasyLAN Wireless online, you may want to add it to the EasyLAN Wireless Admin utility to help the utility find it when it comes online. You need the following information to add an EasyLAN Wireless:
The name of the EasyLAN Wireless. The default name is XCD_xxxxxx where xxxxxx is the last six digits of the MAC address. The MAC address of the EasyLAN Wireless. The IP address of the EasyLAN Wireless. The subnet that the EasyLAN Wireless communicates in. To add an EasyLAN Wireless to the EasyLAN Wireless Admin utility 1. Open the EasyLAN Wireless Admin utility. 2. Open the Set Up menu and select Add. The Add Server dialog box appears. 3-15 EasyLAN Wireless Users Manual 3. 4. 5. In the Server Name field, enter the name of the EasyLAN Wireless. In the MAC Address field, enter the MAC address of the EasyLAN Wireless in the form of six hexadecimal values separated by periods. In the IP Address field, enter the IP address of the EasyLAN Wireless in the form n.n.n.n where n is from 0 to 255. 6. In the Subnet field, enter the subnet that the EasyLAN Wireless communicates in. 7. Click OK to accept your changes and return to the Search screen. The EasyLAN Wireless information appears in the Search screen. Click Cancel to reject your changes, not add a server, and return to the Search screen. Loading Files You can load DAT files to somewhere for some reason that isnt clear to me. To load files 1. Open the EasyLAN Wireless Admin utility. 2. Open the Set Up menu and select Load. The Load File dialog box appears. 3. Enter the name of the file you want to load and click OK. When the file is finished loading, the Search screen appears. Do you need to put in path information?
Saving Files You can save DAT files for some reason that isnt clear to me. To save files 1. Open the EasyLAN Wireless Admin utility. 2. Open the Set Up menu and select Save. The Save File dialog box appears. 3-16 Managing the EasyLAN Wireless 3 Save File Dialog Box 3. Enter the name of the file you want to save and click OK. When the file is finished saving, the Search screen appears. Do you need to put in path information?
3-17 blank 4 Using the Port Monitor blank Using the Port Monitor 4 This chapter explains how to use the XXX port monitor with the EasyLAN Wireless. Installing the Port Monitor The port monitor monitors Windows OS ports . Waiting for information from Lars Enoksson and Gran Reineholm. Sent them email the morning of 3/22/02. 4-3 EasyLAN Wireless Users Manual 4-4 5 Troubleshooting the EasyLAN Wireless blank Troubleshooting the EasyLAN Wireless 5 This chapter describes how to troubleshoot the EasyLAN Wireless. Troubleshooting Printing Problems First, check the printer to make sure it is online and has media and ribbon. If the printer is working fine, test the connection between the printer and the EasyLAN Wireless by pushing the test switch on the back of the printer for less than 5 seconds. Note: Remember, if a test label does not print, the printer may still be able to print through the EasyLAN Wireless. Set up the printer as you normally would and try printing from an application. If the test label does not print, try resetting the EasyLAN Wireless to factory defaults by holding the test switch for more than 5 seconds. Troubleshooting Wireless Configuration Problems Make sure your computers wireless adapter or access point is configured properly and note the settings paying special attention to the wireless mode, SSID or network name, WEP or security, and IP address settings so you can configure your EasyLAN Wireless to the same wireless settings. Make sure you have a good wireless signal from your PC and from the EasyLAN Wireless. Make sure that the EasyLAN Wireless is within range (90 meters or 300 feet), and that it is away from metal objects and other devices with radio signals (such as Bluetooth radios, cordless phones, and microwave ovens). Make sure your computer is set to infrastructure mode if you are connecting through an access point or ad-hoc (802.11) if you are connecting to the EasyLAN Wireless without an access point. See the documentation for your wireless adapter for details. If you are using WEP (Wired Equivalent Privacy) encryption or security on your wireless network, you need to temporarily disable WEP on your PC in order to configure the EasyLAN Wireless. If you are using an access point with WEP enabled and it does not allow non-WEP clients to communicate with other non-WEP clients, then you need to temporarily change the wireless mode of your computer to ad-hoc
(802.11) mode. Note: If no computers on your network can be set to ad-hoc mode, you need to temporarily disable WEP on your access point. When you are done configuring the EasyLAN Wireless, you can re-enable WEP on your computer and change the wireless mode back if necessary. 5-3 EasyLAN Wireless Users Manual If you want to use WEP encryption or password protect your wireless network, and your wireless adapter or access point normally uses a password or passphrase instead of WEP, it should allow you to enter 0x followed by a 10 digit (for 40-bit or 64-bit WEP) or 26 digit (for 128-bit WEP) key in hexadecimal format (0 to 9 or A to F). If you are experiencing slow performance or are having intermittent problems connecting, try changing the RF channel of your wireless network. For help configuring the RF channel using the Web browser interface or the EasyLAN Wireless Admin utility, see Chapter 2, Configuring the EasyLAN Wireless. For help changing the RF channel on your wireless adapter or access point, see the documentation for those products. You should change it to at least three channels lower or higher than any other wireless networks within range. Troubleshooting Network Configuration If you are using TCP/IP, make sure that your computer and the EasyLAN Wireless are on the same IP segment or can reach each other with a PING command from the host. The IP address you assign to the EasyLAN Wireless must be on the same logical network as your host computers (for example, if your computer has an IP address of 192.189.207.3, the EasyLAN Wireless should have an IP address of 192.189.207.x where x is an integer between 1 and 254), or you must properly configure your router address to work with the EasyLAN Wireless. If your EasyLAN Wireless is set to Auto or DHCP for obtaining an IP address, it is possible the EasyLAN Wireless IP address can change. Either configure your DHCP server to give the EasyLAN Wireless a permanent lease or configure the EasyLAN Wireless to be on a Static address outside the scope of DHCP addresses. 5-4 A Console Commands blank Console Commands A This appendix explains how to send the console commands and list the commands. Sending the Console Commands Use either HyperTerminal or the Web browser interface to send the console commands to the EasyLAN Wireless. The following procedure explains how to use the Web browser interface. For help using HyperTerminal, see the documentation for HyperTerminal. Before you can use the Web browser interface, you must open it. To open the Web browser interface 1. Start your Web browser. 2. In the Address (Internet Explorer) or Go to (Netscape) line, enter the IP address for the EasyLAN Wireless, and press Enter. The following page appears. 3. In the Print Server Access Password field, enter the password. The default password is access. 4. Click Submit. The Configuration and Management page appears. A-3 EasyLAN Wireless Users Manual Configuration and Management Page You are now ready to send console commands. To send the console commands 1. Make sure port S1 is set to Console mode:
a. From the Configuration and Management page, click Configure Port. The Configure Port page appears. For help opening the Configuration and Management page, see To open the Web browser interface earlier in this section. b. In the Mode row, select Console. c. Click Submit. d. Return to the Configuration and Management page. 2. From the Configuration and Management page, click Console. The Console page appears. A-4 Console Page Console Commands A 3. Enter the commands you want to send in the field, and then click Enter. 4. How do you get out of this screen?
General Commands This table lists general commands for configuring and managing the EasyLAN Wireless. Command cl serve st stringnumber Description Removes the specified string number. cl fa cl po p1 job exit/^d he in set default set port s1 co dis set load dis Deletes the fatal error log. Clears the current entry in the EasyLAN Wireless internal queue for the parallel port. Exits EasyLAN Wireless console. Provides information on available commands Resets the EasyLAN Wireless. Sets the EasyLAN Wireless parameters to factory defaults. Disables console mode on port S1. Disables the firmware reload after exit. A-5 EasyLAN Wireless Users Manual General Commands (continued) Command set load en set load ho name set load ip n.n.n.n set load so filename set pa password set port p1 ackh status set port p1 bid status set port p1 dvid status set port p1 ecp status set port p1 fstb status set port p1 nbuf status set pro password set serve de Description Enables the firmware reload after exit. Sets the node name of the boot host for NetWare firmware load. Sets the IP address of the load host (TCP/IP firmware load). Sets the host filename of the firmware to load. Sets the console password. The default password is access. Enables or disables pACKH on parallel port (for older printers). Where status equals en for enabled or dis for disabled. Enables or disables bidirectional mode on the parallel port. Where status equals en for enabled or dis for disabled. Enables or disables 1284 device ID queries on the parallel port. Where status equals en for enabled or dis for disabled. Enables or disables 1284 ECP mode on the parallel port. Where status equals en for enabled or dis for disabled. Enables or disables fast strobe mode on the parallel port. Where status equals en for enabled or dis for disabled. Enables or disables no buffering on parallel port. Where status equals en for enabled or dis for disabled. Sets the console protection password to prevent access to set commands. (Use unprotect command to access set commands.) Sets the node description string displayed with the show server command. set serve str n Defines the EasyLAN Wireless BOT/EOT string. set servi servicname protocol status Enables or disables specified protocol on the specified service. Where status equals en for enabled or dis for disabled. set servi servicename bot nn Sets the service BOT string to nn. set servi servicename eot nn Sets the service EOT string to nn. set servi servicename fi nn Sets the service filter to nn. set servi servicename fms matchnumber set servi servicename frs replacenumber set servi ip servicename status Sets the service with the specified match string number. Sets the service with the specified replacement string number. Enables or disables IP jobs. Where servicename equals the name of the service and status equals en for enabled or dis for disabled. A-6 Console Commands A General Commands (continued) Command set servi servicename na newname Description Changes the service name. set servi servicename rec status Enables or disable receive only mode on the specified service. Where servicename equals the name of the service and status equals en for enabled or dis for disabled. sh fa sh fr sh loa sh po sh po p1 sta sh serve co sh servi sh te sh ve unpro ze Shows the fatal error log. Shows the memory available. Shows the firmware update parameters. Shows the port parameters. Shows the current port status. Shows the EasyLAN Wireless statistics. Shows the service parameters. Prints the test label. Shows the EasyLAN Wireless firmware version. Allows the system manager to temporarily access set commands when the remote console is in protected mode. The set default command can be used to permanently disable the protected mode. Zeroes statistical counts. TCP/IP Commands Use these commands to configure and manage TCP/IP parameters. Command set ip ac status n.n.n.n Description Enables or disables specified IP address from accessing the EasyLAN Wireless. Where status equals en for enabled, dis for disabled, or all for enabling all IP addresses and n.n.n.n equals the specific IP address. set ip ad n.n.n.n Sets the IP address of the EasyLAN Wireless. set ip bo n set ip status set ip meth stat Sets the number of BOOTP/RARP tries. Enables or disables IP processing. Where status equals en for enabled or dis for disabled. Sets IP to static address so that the EasyLAN Wireless will not look for a DHCP address. A-7 EasyLAN Wireless Users Manual TCP/IP Commands (continued) Command set ip ra nn Description Sets the procedure used by the EasyLAN Wireless when obtaining its IP address. By default the IP address is set along with a default subnet mask and a router address that is the same as the address of the load host. By setting nn to 1, the subnet mask is not set. If nn is set to 2, the router address is not set. If nn is set to 3, neither the subnet mask nor the router address is set. set ip ro n.n.n.n set ip su n.n.n.n set ip ti n Sets the default router address. Sets the subnet mask. Sets the inactivity timeout in minutes. set servi servicename ip status Enables or disables TCP/IP jobs on specified EasyLAN Wireless. Where servicename equals the name of the service and status equals en for enabled or dis for disabled. set servi servicename tcp nn Sets the TCP port number (>1023) on the specified service. sh ip sh ip ac Shows LPD/TCP/TELNET parameters. Shows IP addresses that are allowed to access the EasyLAN Wireless. NetWare Commands Use these commands to configure and manage NetWare parameters. Command cl netw se server set netw ad n set netw status set netw fr type Description Removes the specified NetWare file server from the EasyLAN Wireless access list. Sets the advertising frequency of the EasyLAN Wireless. Enables or disables the NetWare protocol on the EasyLAN Wireless. Where status equals en for enabled or dis for disabled. Sets the NetWare frame type. Where type equals 802.2, 802.3, eth for Ethernet II, al for all, au for auto, or sna for SNAP. set netw ne n Sets the NetWare internal network number. set netw np pserver n on service Set NPrinter mode on the specified service. set netw pa password Sets the EasyLAN Wireless login password for the file server. set netw po n Sets the queue polling time in seconds. A-8 Console Commands A NetWare Commands (continued) Command set netw qs fileserver on service Description Sets queue server mode on the specified service. set netw re Rescans the file servers for new queues. set netw name se status Enables or disables the file server. Where name equals the name of the file server and status equals en for enabled or dis for disabled. set servi servicename net status Enables or disables NetWare jobs on the specified service. Where servicename equals the name of the service and status equals en for enabled or dis for disabled. sh netw Shows the NetWare parameters. set servi servicename con string set servi servicename tree string Sets NDS context. Sets NDS TREE. Radio Commands Use these commands to configure and manage radio parameters. Command set en mo mode set en ssid mynetwork set en wep encryption set en key# number set en keyval wepkey set en ch nn set en sp speed Description Sets the 802.11b wireless mode. Where mode equals in for infrastructure, ad for ad-hoc, or ps for pseudo ad-hoc. Sets the 802.11b wireless SSID, sometimes referred to as network name. Use double-quotes if you are using a space character in the SSID. Sets the wired equivalent privacy encryption level. Where encryption equals dis for disabled, 64 for 64-bit encryption, or 128 for 128-bit encryption. Sets which WEP key number is to be used. Where number is a value from 1 to 4. The default value is 1. Set the 10-digit (for 64-bit encryption) or 26-digit (for 128-bit encryption) WEP key value. This key must be hexadecimal values. Sets the 802.11b wireless channel to be used. Sets the 802.11b wireless speed in Mbps. Where speed equals 1, 2, 5 for 5.5, or 11. A-9 blank
1 2 | User Manual 2 | Users Manual | 104.44 KiB | / September 05 2002 |
Exhibit O: User Manual 2 FCC ID: HN2EASYLAN Part No. 072642-001 Important EasyLAN Wireless Information!
Contents For Users in the United States and Canada........................................................................2 For Users Outside of the United States and Canada..............................................................3 Franais.................................................................................................................5 Deutsch..................................................................................................................6 Italiano..................................................................................................................7 Espaol..................................................................................................................8 Portugus...............................................................................................................9 For Users in the United States and Canada Place this supplement in your manual. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Federal Communications Commission Compliance This equipment is intended for operation in a commercial environment, in compliance with the requirements for a Class A digital device, pursuant to Part 15 of the FCC Rules, and it must not be used in a residential environment; however, it has also been tested and found to comply with the more stringent requirements for a Class B device, pursuant to Part 15 of the FCC Rules. It generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause interference to radio communications. If this equipment causes interference, the user will be required to correct the interference at the users own expense. Note: To maintain compliance with FCC Rules, the input/output (I/O) cables that interconnect between the device and any peripheral must be as specified by Intermec. Operation Warning To comply with the FCCs RF exposure requirements and minimize health hazards:
The user shall stay at least 20 cm (8 in) away from the antenna of this device, when the device is in use in Intermec printers. Installation Warning To comply with the FCCs RF exposure requirements and minimize health hazards:
Printers containing this device must be installed in such a way that the user will be at least 20 cm (8 in) away from the antenna, when the device is in use. The installers should not forget that the burden of maintaining this distance is on the installer and not the user. the antennas should be installed in a manner that will comply with this requirement. Caution Changes or modifications not expressly approved by Intermec could void the users authority to operate this equipment. Industry Canada Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This device requires a radio license, unless it is used totally inside a building. (The user must obtain this license.) Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. 2 Cet appareil exige une license radio moins dtre entirement install dans un btiment. (Lutilisateur doit obtenir cette license.) For Users Outside of the United States and Canada The Intermec product you purchased contains a Model 2126 transceiver module. This module transmits and receives data using a 2.4 GHz Direct Sequence Spread Spectrum system. In some host devices the transceiver is user accessible. If you are using such a device, please pay attention to the radio usage guidelines provided in the host device manual or getting started guide. The use of the correct antenna with correct installation is especially important for legal and efficient use of the product. In some host devices the transceiver is not user accessible. Please see the host device manual for any radio-related instructions for those products. Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the Intermec Web site for additional documentation at www.intermec.com. Hereby, Intermec Technologies Corporation declares that this Model 2126 is in compliance with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (incl. Amdt. 1-4, 11) SP/DGPT/ATAS 23 (1995-02) The original Declaration of Conformity is available on the Intermec Technologies Corporation Web site at www.intermec.com. This product transmits electromagnetic waves at 2.4 GHz frequency range. It has been tested and found compliant with U.S. (OET Guide 65) and Canadian (RSS 102) RF exposure regulations. There are no regulations covering this product type in the EU at this time. The transmitter modules output power is 100mW or less. The products using this module are intended for business and industrial environments. They should not be used in residential environments and by children. This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Community. The following table indicates the areas of intended use of the equipment and any known restrictions. 3 Country of Intended Use Yes License Required No Restrictions Details X X If this product is used outdoors, then it is restricted to 2460 MHz to 2483.5 MHz. Frequency operation restricted to 2462 MHz to 2472 MHz. Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Portugal Spain Sweden United Kingdom Other non-EU:
Iceland Liechtenstein Norway Slovenia Switzerland X X X X X X X X X X X X X X X X X X X X Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22. 4 Pour les utilisateurs en dehors du Canada et des Etat-unis Le produit Intermec que vous avez achet contient un module metteur-rcepteur de modle 2126. Ce module peut transmettre et recevoir des donnes l'aide d'un systme d'talement du spectre en squence directe de 2,4 GHz. Sur certains appareils htes, l'metteur-rcepteur est accessible l'utilisateur. Si vous utilisez un tel appareil, veuillez respecter les directives d'utilisation radio prsentes dans le manuel de l'appareil hte ou dans le guide de mise en route. L'utilisation d'une antenne approprie avec une installation correcte est particulirement importante pour assurer le respect des rglementations et l'efficacit du produit. Sur certains appareils htes, l'metteur-rcepteur n'est pas accessible l'utilisateur. Veuillez consulter le manuel de l'appareil hte pour obtenir les instructions concernant les missions radio pour ces produits. Les informations de programmation et de configuration pour les metteurs-rcepteurs sont galement fournies dans la documentation de l'appareil hte. Pour obtenir toute documentation supplmentaire, veuillez consulter le site Web d'Intermec, l'adresse www.intermec.com. Par la prsente, Intermec Technologies Corporation dclare que ce modle 2126 est conforme aux exigences de base et autres exigences pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a t valu par rapport aux normes suivantes :
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (comprenant l'amendement 1-4, 11) SP/DGPT/ATAS 23 (Fvrier 1995) La Dclaration de conformit originale est disponible sur le site Web d'Intermec Technologies Corporation, l'adresse www.intermec.com. Ce produit met des ondes lectromagntiques une plage de frquences de 2,4 GHz. Il a t valu et reconnu conforme aux rglements concernant l'exposition la radiofrquence des tats-Unis (OET Guide 65) et du Canada (RSS 102). Il n'y a actuellement aucun rglement couvrant ce type de produit pour l'Union europenne. La puissance de sortie du module metteur-rcepteur est de 100 mW or less. Les produits utilisant ce module sont destins des environnements commerciaux et industriels. Ils ne doivent pas tre utiliss dans des environnements rsidentiels et par des enfants. Ce produit est marqu de ce logo et il utilise des bandes de frquence radio qui ne sont pas harmonises sur le territoire de la Communaut europenne. Le tableau suivant rpertorie les zones d'utilisation prvues pour l'quipement et les restrictions connues. Pays dutilisation prvu Oui Licence requise Non Restrictions Dtails Belgique France X X X X Lorsque ce produit est utilis lextrieur, il est alors limit une valeur variant entre 2 460 MHz et 2 483,5 MHz La frquence dopration est limite une valeur variant entre 2 462 MHz et 2 472 MHz. 5 Conformit additionelle la norme EMI/RFI Cet appareil respecte les limites imposes pour la Classe B par le CISPR 22. Fr Benutzer auerhalb von Kanada und den Vereinigten Staaten Das Intermec-Produkt, das Sie gekauft haben, enthlt ein Sende-Empfangs-Modul, Modell 2126 . Dieses Modul sendet und empfngt Daten mit Hilfe eines 2,4-GHz-Direktsequenz-Spreizspektrumsystems. Bei einigen Hostgerten ist das Sende-Empfangs-Gert vom Benutzer aus zugnglich. Wenn Sie ein solches Gert verwenden, beachten Sie bitte die Funkverkehrsanleitung im Benutzerhandbuch des Hostgertes oder in der Anleitung Erste Schritte. Das Verwenden der richtigen Antenne und die richtige Installation sind aus legalen Grnden und fr den effizienten Gebrauch des Produktes besonders wichtig. Bei einigen Hostgerten ist das Sende-Empfangs-Gert nicht vom Benutzer aus zugnglich. Bitte konsultieren Sie das Benutzerhandbuch des Hostgertes, um Anleitungen bezglich des Funkverkehrs dieser Produkte zu erhalten. Dieses Produkt bermittelt elektromagnetische Wellen in einem Frequenzbereich von 2,4 GHz. Es wurde getestet und in bereinstimmung mit U.S. (OET Anleitung 65) und kanadischen (RSS 102) RF-
Bestrahlungsvorschriften befunden. Zur Zeit gibt es in der EU keine Richtlinien, die diesen Produkttyp abdecken. In der Dokumentation des Hostgertes finden Sie auerdem Informationen zum Programmieren und Konfiguriern der Sende-Empfangs-Gerte. Weitere Hinweise erhalten Sie auf der Intermec-Website unter www.intermec.com. Hiermit erklrt Intermec Technologies Corporation, dass das Modell 2126 mit den wesentlichen Anforderungen und anderen sachdienlichen Vorschriften der R&TTE-Richtlinie (1999/5/EC) bereinstimmt. Dieses Produkt wurde gem der folgenden Normen bewertet:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (einschl. Amdt. 1-4, 11) SP/DGPT/ATAS 23 (Februar 1995) Die Originalkonformittserklrung steht auf der Website der Intermec Technologies Corporation unter www.intermec.com zur Verfgung. Die Ausgangsleistung des Sende-Empfangs-Moduls betrgt 100mW or less. Die Produkte, die dieses Modul verwenden, sind fr geschftliche und industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden und in der Nhe von Kindern verwendet werden. Das Produkt ist mit diesem Markenzeichen versehen und verwendet Radiofrequenzbreiten, die in der Europischen Gemeinschaft nicht berall aufeinander abgestimmt sind. Zustzliche Elektromagnetische Strung-bereinstimmung Dieses Gert entspricht den Grenzbestimmungen der Klasse B von CISPR 22. 6 Per gli utenti al di fuori del Canada o degli Stati Uniti Il prodotto Intermec che avete acquistato contiene un modulo transceiver Modello 2126. Il transceiver trasmette e riceve i dati tramite un sistema a 2,4 GHz che utilizza la tecnologia DSSS (sequenza diretta, spettro esteso). In alcuni dispositivi host, l'utente ha la possibilit di accedere al transceiver. Se il dispositivo che utilizzate di questo tipo, vi preghiamo di prestare attenzione alle direttive sull'utilizzo dei dispositivi radio fornite nel manuale o nella guida introduttiva del dispositivo host. Ai fini dell'efficienza e del rispetto delle normative, particolarmente importante installare correttamente ed utilizzare il tipo di antenna appropriato per questo prodotto. In alcuni dispositivi host, l'utente non ha la possibilit di accedere al transceiver. Per questi prodotti, vi preghiamo di consultare le istruzioni sui dispositivi radio fornite eventualmente nel manuale del dispositivo host. La documentazione del dispositivo host fornisce inoltre le informazioni sulla programmazione e la configurazione dei transceiver. Per altre informazioni, consultate il sito Web Intermec all'indirizzo www.intermec.com. Con la presente Intermec Technologies Corporation dichiara che questo Modello 2126 conforme ai requisiti essenziali e alle altre clausole importanti della direttiva R&TTE (1999/5/EC). Questo prodotto stato valutato in base ai seguenti standard:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (incluso Amdt. 1-4, 11) SP/DGPT/ATAS 23 (febbraio 1995) La dichiarazione di conformit originale disponibile presso il sito Web di Intermec Technologies Corporation a www.intermec.com. Questo prodotto trasmette onde elettromagnetiche con una frequenza intorno ai 2,4 GHz. Dai collaudi ai quali stato sottoposto risultato conforme alle norme statunitensi (OET Guide 65) e a quelle canadesi
(RSS 102) relative all'esposizione alle radiofrequenze. Attualmente non esistono norme relative a questo prodotto nell'Unione Europea. La potenza di uscita del modulo trasmittente di 100 mW or less. I prodotti che utilizzano questo modulo sono destinati ad ambienti industriali e commerciali e non debbono essere utilizzati in ambienti residenziali e dai bambini. Questo prodotto reca questo marchio ed utilizza bande di radiofrequnza che non sono armonizzate nell'ambito della Comunit Europea. Ulteriore conformit con EMI/RFI Questo dispositivo conforme ai limiti stabiliti in CISPR 22 per la Classe B. 7 Para Usuarios Fuera de Canada o de los Estados Unidos Este producto de Intermec contiene un mdulo transceptor Modelo 2126. Dicho mdulo transmite y recibe datos por medio de un sistema de espectro ensanchado en secuencia directa de 2,4 GHz. En algunos dispositivos host, el usuario puede tener acceso al transceptor. En este caso, se debe prestar atencin a las instrucciones para uso de la radio contenidas en el manual o en la gua del usuario del dispositivo host. El uso de la antena correspondiente, as como la instalacin apropiada de la misma son de especial importancia para un funcionamiento eficiente y de acuerdo con la legislacin vigente. En algunos dispositivos host, el usuario no puede tener acceso al transceptor. En este caso, se debe consultar el manual del dispositivo para obtener instrucciones sobre el uso de la radio. Para obtener informacin sobre la configuracin y programacin del transceptor, consulte la documentacin provista con el dispositivo host. Para obtener documentacin adicional, visite el sitio web de Intermec: www.intermec.com. Por la presente, Intermec Technologies Corporation declara que el Modelo 2126 cumple con los requisitos esenciales de acuerdo con la directiva (1999/5/EC) de R&TTE. Este producto ha sido evaluado de acuerdo con los siguientes estndares o normas:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (incl. Enmienda 1-4, 11) SP/DGPT/ATAS 23 (febrero de 1995) La Declaracin de Conformidad original est disponible en el sitio web de Intermec Technologies Corporation: www.intermec.com. Este producto transmite ondas electromagnticas de radio en la gama de frecuencias de 2,4 GHz. Ha sido probado y se ha determinado que cumple con las reglamentaciones de los EE.UU. (OET Guide 65) y del Canad (RSS 102), referentes a la exposicin de RF. En este momento, no existen reglamentaciones que abarquen este producto en la UE. La potencia de salida del mdulo transmisor es de 100mW or less. Los productos que usan este mdulo estn destinados para uso en ambientes comerciales e industriales. No deben ser usados en ambientes residenciales o en la proximidad de nios. Este producto est marcado con este logotipo y usa bandas de frecuencia de radio que no han sido armonizadas a lo largo de la Unin Europea. Conformidad adicional con EMI/RFI Este dispositivo cumple con los lmites requeridos para la Clase B de CISPR 22. 8 Para Usurios Fora do Canad ou dos Estados Unidos O produto Intermec que voc comprou contm um mdulo transceptor Modelo 2126. Este mdulo transmite e recebe dados usando um sistema DSSS (Espectro de Difuso de Seqncia Direta) de 2,4 GHz . Em alguns dispositivos hospedeiros, o transceptor acessvel ao usurio. Se voc est usando um dispositivo desse tipo, verifique as orientaes sobre o uso de rdio fornecidas pelo manual ou pelo guia de primeiros passos do dispositivo hospedeiro. O uso da antena correta adequadamente instalada especialmente importante para a utilizao legal e eficiente do produto. Em alguns equipamentos hospedeiros, o transceptor no acessvel ao usurio. Consulte o manual desses equipamentos para obteno de todas as instrues relativas ao uso de rdio nos mesmos. As informaes sobre programao e configurao dos transceptores tambm so fornecidas na documentao do dispositivo hospedeiro. Consulte tambm o site da Intermec na web, no endereo www.intermec.com, para documentao complementar. Por este documento, a Intermec Technologies Corporation declara que o Modelo 2126 atende aos requisitos essenciais e outras condies relevantes da Diretiva R&TTE (1999/5/EC). Esse produto foi avaliado em relao aos seguintes padres:
ETSI EN 300 328-2 v1.2.1 (2001-12) ETSI EN 301 489-17 v1.1.1 (2001-09) EN 60950:1992 (includa Amdt. 1-4, 11) SP/DGPT/ATAS 23 (fevereiro de 1995) A Declarao de Conformidade original est disponvel no site da web da Intermec Technologies Corporation no endereo www.intermec.com. Este produto transmite ondas eletromagnticas na faixa de freqncia de 2,4 GHz. Ele foi testado e aprovado quanto sua conformidade com os regulamentos de exposio RF dos EUA (OET Guide 65) e do Canad (RSS 102). No existem regulamentos cobrindo esse tipo de produto atualmente na UE. A potncia de sada do mdulo transmissor de 100mW or less. Os produtos que usam este mdulo so destinados aos ambientes comerciais e industriais. Eles no devem ser utilizados em ambientes residenciais e por crianas. Este produto identificado por esta logomarca e utiliza bandas de freqncia de rdio que no esto harmonizadas na Comunidade Europia. Conformidades EMI/RFI Adicionais Este produto atende aos requisitos de limite Classe B do CISPR22. 9 Part No. 072642-001
*072642-001*
*07642-001*
6001 36th Avenue West Everett, WA 98203-9280 2002 Intermec Technologies Corp. All Rights Reserved
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-03-18 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2002-05-09 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2003-03-18
|
||||
1 2 |
2002-05-09
|
|||||
1 2 | Applicant's complete, legal business name |
Intermec Technologies Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0003729654
|
||||
1 2 | Physical Address |
9680 Old Bailes Rd.
|
||||
1 2 |
Fort Mill, South Carolina 29707
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
g******@nwemc.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
HN2
|
||||
1 2 | Equipment Product Code |
EASYLAN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B****** R****
|
||||
1 2 | Title |
VP & GC, Honeywell Scanning & Mobility
|
||||
1 2 | Telephone Number |
803-8********
|
||||
1 2 | Fax Number |
803-8********
|
||||
1 2 |
b******@honeywell.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Intermec
|
||||
1 2 |
Northwest EMC, Inc.
|
|||||
1 2 | Name |
C**** K****** T********
|
||||
1 2 |
G**** V**** K******
|
|||||
1 2 | Physical Address |
6001 36th Avenue West
|
||||
1 2 |
22975 NW Evergreen Parkway
|
|||||
1 2 |
Everett, Washington 98203-9280
|
|||||
1 2 |
Hillsboro, Oregon 97124
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
425 ********
|
||||
1 2 |
503-8********
|
|||||
1 2 | Fax Number |
425 3********
|
||||
1 2 |
503-8********
|
|||||
1 2 |
c******@intermec.com
|
|||||
1 2 |
g******@nwemc.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Intermec
|
||||
1 2 |
Northwest EMC, Inc.
|
|||||
1 2 | Name |
C****** D****** W****
|
||||
1 2 |
V**** A******
|
|||||
1 2 | Physical Address |
6001 36th Avenue West
|
||||
1 2 |
22975 NW Evergreen Parkway
|
|||||
1 2 |
Everett, Washington 98203-9280
|
|||||
1 2 |
Hillsboro, Oregon 97124
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
425 3******** Extension:
|
||||
1 2 |
503-8********
|
|||||
1 2 | Fax Number |
425 3********
|
||||
1 2 |
503-8********
|
|||||
1 2 |
c******@intermec.com
|
|||||
1 2 |
v******@nwemc.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Model EASYLAN | ||||
1 2 | EASYLAN | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. Approved only for use in Intermec Technologies Corporation Model 3400E400, Model 4400 printers and Models 501XP and 601XP printers. | ||||
1 2 | The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approved only for use in Intermec Corporation Model 3400E400 and Model 4400 printers. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Northwest EMC, Inc.
|
||||
1 2 | Name |
G******** K********
|
||||
1 2 | Telephone Number |
503-8********
|
||||
1 2 | Fax Number |
503-8********
|
||||
1 2 |
g******@nwemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CE | 2412.00000000 | 2462.00000000 | 0.0224000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0224000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC