72mm 72mm 3. Diagram USB plug Mini USB plug
(I): On
(O): Off LED light charging:
Mini USB port This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Loop Speaker Operation Manual Contents:
1. Instructions 2. Specifications 3. Diagram 1.1 Charging the speaker 1.2 Bluetooth Connectivity 1.3 LED light codes 72mm 1. Instructions 1.1 Charging the speaker Connect the included USB cable to a computer USB port or USB charger, and to the speaker mini-USB port. When charging, the LED will illuminate in Red. When battery is fully powered, the LED will turn off. 1. 2 Setting up Bluetooth Connectivity
(before setting up, make sure the speaker is turned on, fully charged, and not already connected to another device) TO PAIR TO AN ANDROID PHONE 1. Open Settings 2. Open Wireless and Network 3. Open Bluetooth Settings 4. Turn Bluetooth on (if it is off) 5. Select Search for Devices 6. Select TOUCHPOINT 7. Touch Connect TO PAIR TO AN IPHONE OR IPAD 1. Open Settings 2. Turn Bluetooth on (if it is off) 3. Select TOUCHPOINT found under My Devices 4. Once paired: it will say Connected next to the device name TO PAIR TO A MAC OS COMPUTER 1. Open System Preferences 2. Open Bluetooth 3. Click the + button to add a Bluetooth device 4. Select TOUCHPOINT 5. Click Continue - the computer will pair with the device. If asked, input the passcode 0000 TO PAIR TO A WINDOWS OS COMPUTER 1. Open Devices and printers 2. Click Add a device 3. Select UGO or Bluetooth headset 4. Click Next 5. Input Pass code 0000 if necessary 1.3 LED Light :
Off / Discharged No light On / in pairing mode Blinking blue light On / connected to device Blue light (no blinking) 2. Specifications Output Bluetooth version Frequency Max sound level (dB) Charging time Play time at full volume THD (Distortion level) DC input Battery
: 2.2W
: Compatible with V1.1 through v2.1
: 100Hz - 20KHz
: >85db or 90 2db
: 1.5hrs
: continuously approx. 2hrs
: < 0.5%
: DC5V
: Li-ion