FCC ID: 2ABFZ-ARC51-4WAP 11ac Outdoor CPE

H C H C H C H C H C H C H C

* Note: The pictures of the above products may change slightly according to the production cycle, and the final appearance is based on the physical object. H C H C H C H C Repeater SSID Product test romm_2.4(

BSSID Encrypt Signal 44:D1:FA:25:DC:D1 WPA2PSK_TKIPAES

[-35dBm]

Link quality

[100%]

FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheusersauthoritytooperatetheequipment.Thisequipmenthasbeentestedandfoundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and

(2) this device must accept any interference received, including interference that may cause undesiredoperation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20 cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

FCC ID LABEL:

Label Location Width:2cm FCC ID: 2ABFZ-ARC51-4WAP Product name: 11ac Outdoor CPE Model No.: ARC51-4WAP Long:4cm

International Communications Corporation Agent Authorization Company: International Communications Corporation Address:11801 Pierce St., 2nd FL Riverside, CA 92505, United States Product Name:11ac Outdoor CPE Model Number(s): ARC51-4WAP, ARC5*-*WAP(*=0-9) Product Description:11ac Outdoor CPE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: Apr. 27, 2021 Name:

Keith M Alexis Title:

Dir. of Product Marketing Company:

International Communications Corporation

International Communications Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 27, 2021 Subject; Request for Confidentiality FCC ID: 2ABFZ-ARC51-4WAP To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description SOFTWARE SECURITY DESCRIPTION It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Keith M Alexis Title: Dir. of Product Marketing

Model Difference Declaration To Whom It May Concern, We, International Communications Corporation(11ac Outdoor CPE) Trademark:activeARC Wireless; Model Number:ARC51-4WAP, ARC5*-

*WAP(*=0-9);All models the function, software and electric circuit are the same, only with a product color, appearance and model named different for commercial purpose. Test sample model:ARC51-4WAP. Please contact me if you have any question. Name: Keith M Alexis Date: Apr. 27, 2021 Title: Dir. of Product Marketing Signature of applicant:

International Communications Corporation FCC Software Configuration Control Declaration Date: Apr. 27, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product: 11ac Outdoor CPE Model No.: ARC51-4WAP, ARC5*-*WAP(*=0-9) Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Date: Apr. 27, 2021 Name:Keith M Alexis Title: Dir. of Product Marketing Signature of applicant FCC Software Configuration Control Declaration Rev1.0.docx