all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 3.18 MiB | March 10 2023 / September 06 2023 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 1.96 MiB | March 10 2023 / September 06 2023 | delayed release | ||
1 |
|
External Photos | External Photos | 1.14 MiB | March 10 2023 / September 06 2023 | delayed release | ||
1 |
|
Label and Label location | ID Label/Location Info | 118.59 KiB | March 10 2023 | |||
1 |
|
2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 146.79 KiB | March 10 2023 | |||
1 |
|
2.911 (d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 142.24 KiB | March 10 2023 | |||
1 |
|
2.911 (d)(7) US Agent for Service of Process v1.2 | Attestation Statements | 287.07 KiB | March 10 2023 | |||
1 |
|
Antenna Specification | Test Report | 298.45 KiB | March 10 2023 | |||
1 | BOM | Parts List/Tune Up Info | March 10 2023 | confidential | ||||
1 | Block | Block Diagram | March 10 2023 | confidential | ||||
1 |
|
EMF | RF Exposure Info | 154.18 KiB | March 10 2023 | |||
1 |
|
FCC Family Declaration Letter rev.1 | Cover Letter(s) | 418.37 KiB | March 10 2023 | |||
1 |
|
FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 83.87 KiB | March 10 2023 | |||
1 |
|
LetterofAuthorizationRev1.0 | Cover Letter(s) | 18.93 KiB | March 10 2023 | |||
1 | OP | Operational Description | March 10 2023 | confidential | ||||
1 | SCH | Schematics | March 10 2023 | confidential | ||||
1 |
|
Test Report | Test Report | 1.57 MiB | March 10 2023 | |||
1 |
|
Test Setup photos | Test Setup Photos | 598.84 KiB | March 10 2023 / September 06 2023 | delayed release |
1 | User manual | Users Manual | 3.18 MiB | March 10 2023 / September 06 2023 | delayed release |
KLLOM Bidet Manual KL600 Series KLLOM is an instantaneous warm water bidet that uses direct water. Since there is no hot water tank, there are no foreign substances and germs generated from the hot water tank. It is clean and safe to use. The safety precautions are for user safety and to prevent property damage, so be sure to read and use it correctly. Quality is not guaranteed when used in regions with different rated voltages. The user manual includes the product warranty. Please keep it carefully so that it is not lost. The design and specifications of this product are subject to change without notice for quality improvement. Intertec Co., Ltd. Contents Safety Precautions Grounding Instructions Structure and name of the product How to install Operation check and maintenance How to use Remote control model function table Troubleshooting Specifications Warranty Card 2 3-6 7 8 9-10 11 12-14 15 16 17 18 Safety Precautions Follow the instructions to avoid danger or property damage and to use the product correctly. Cautions are divided into Warning and Caution and their meanings are as follows. Warning Violation of the instructions may result in death or serious injury. Caution Violation of the instructions may result in personal injury or property damage. Actions that should be "Prohibited"
General prohibition Do not spray water Flammable
"Prohibited"
Wet hands
"do not touch"
Disassembly, modification
"Prohibited"
Do not put in water It is a mandatory content that must be observed. Must comply Ground wire connection Be sure to disconnect the power plug from the outlet Warning WARNING FOR SAFETY Do not disassemble, repair or modify the product. Only qualified service personnel should service product. Do not spray water Do not spray water on the product body or the power plug. Do not use in humid places. Do not dismantle It may cause fire or electric shock. Please contact customer service for product repair. It may cause fire or electric shock. Connect to a dedicated grounded outlet ( AC120V ) and use it. Be sure to ground to prevent short circuit or electric shock. Grounding Wet hands
"Do not touch"
There is a risk of electric shock due to malfunction or short circuit. If you do not have a ground terminal, contact your electric company. Do not touch the power plug with wet hands. Unplugging or connecting the power plug with wet hands may cause electric shock or injury. Be sure to unplug the power plug from the outlet when cleaning the bidet or removing it from the toilet. Must comply Disconnect It may cause electric shock. Do not use a damaged power cord, plug, or loose outlet. Contact customer service for exchange. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. It may cause fire or electric shock. 3 Safety Precautions If you use a toilet seat or a warm air dryer for a long time, there is a risk of low-temperature burns. Please be especially careful when using it by children, people who cannot control the temperature on their own, or those with sensitive skin. Warning Caution for safety Never connect the power supply when it is not installed on the toilet and the water supply hose is not connected. Prohibited Prohibited Do not connect to the power wiring of other products at the same time. Do not connect bathroom fans or other electric heating appliances at the same time. It may cause fire or malfunction. Beware of low-temperature burns. Prolonged skin contact, even at relatively low temperatures, can cause low-temperature burns. Prohibited Must comply For children, the elderly, patients, and people with physical disabilities, lower the toilet seat temperature, hot water temperature, and drying temperature before use. When cleaning the bidet, unplug the power plug and use a soft cloth. Do not use a scrubber, benzene, or bleach. It may cause scratches, cracks, discoloration, damage or discoloration of the body. Problems caused by customer negligence are not covered by free repair even within the warranty period. New hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. Do not bend or damage the water supply hose. Water may leak or not be supplied. Prohibited Prohibited Check the power of the product before use. Connect the power plug to the outlet correctly. Please use tap water for water supply. Be sure to connect to the cold water pipe. Using industrial or heavy water other than tap water may cause skin diseases and other diseases. Connecting the water supply hose to the hot water pipe may cause burns or malfunction. Keep any ammable materials, including cigarette ends and ashtray, etc., away from the product. Flammable
"Prohibited"
Prohibited It may cause fire, electric shock or injury. Never put the product in water. It may cause malfunction or electric shock. Children, the elderly, and people who cannot sit on the toilet alone or stand up on the toilet alone, etc., must be supervised by a guardian so that they do not fall over when using it. 4 Safety Precautions Caution Caution for safety Prohibited Do not step on, climb or forcefully lean on the toilet seat or toilet seat cover. In particular, do not sit on the toilet seat cover. Do not press or step on the toilet seat cover, toilet seat, control panel, or body forcibly. It may damage the product or cause malfunction. It may cause injury due to deformation or damage. Do not close the toilet seat or seat cover roughly. Must comply This appliance can be used by children aged from3 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Be careful not to get the bidet dirty with excrement and urine. Prohibited Must comply It may cause odor and malfunction. It may cause malfunction. If the nozzle hole is clogged, use a soft, unused toothbrush to clean it. Children may fall into the toilet seat when using it, so please use it with an adult. Do not put your nger or other things into the cover of dryer or nozzle. Do not block the outlet of warm air. Must comply Prohibited You may be injured. You may be injured. It may cause fire, electric shock or injury. Checks before installation Please check whether the installation environment is possible first.
( image reference ) Since the length of the power cord is about 1.5 m, an electrical outlet must be located near the toilet bowl in the bathroom. Special installation materials are required for special 60mm Toilet 130~200mm 40mm toilets without a water tank.
(direct water type, fresh valve type). If there is a problem with the installation environment, please contact the place of purchase. m m 0 0 5
0 8 4 m m 0 4 5
0 2 5 5 Safety Precautions Safety Precautions Marking This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Remote control battery replacement When the remote control Battery LED is lit, replace the batteries. Double-sided tape 1. Remove the remote control from the holder and open the battery cover on the back of the remote control. 2. After assembling two AA type 1.5V batteries according to the + and - polarities, close the cover.
(Be sure to check the polarity) 3. After confirming the location where the remote control will be attached, clean the wall at the location where it will be attached. 4. Remove the double-sided tape protective vinyl from the holder, attach the holder to the wall, and then insert the remote control into the holder. We are not responsible for any damage caused by strong shocks (falls, etc.) to the remote control or if it falls into the toilet due to negligence in maintenance. 6 Grounding Instructions When using products for 120V (USA, etc.) This product has to be grounded. Provides an escape wire for leakage current to reduce the risk of electric shock In the event of a short circuit. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. DANGER- Improper use of the grounding plug can result in a risk of electric shock. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. Consult with a licensed electrician if you have any concern about whether the product is properly grounded. This product is for use on a normal 120V circuit and has a grounding plug that looks like the plug illustrated in sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be plugged into a properly grounded outlet (should be installed by a licensed electrician). The green colored wire from the adapter must be connected to a permanent ground. Whenever the adapter is used, it must be held in place by the screw. Preferred Connection Temporary Connection GROUNDED OUTLET ADAPTER ADAPTER GROUNDING PIN
(A) GROUNDED OUTLET BOX METAL SCREW
(B) TAP FOR GROUNDING SCREW
(C) Figure 1 IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK. Electric wiring has to be done in accordance with all local codes, or in the absence of local codes, with National Electrical Codes. DANGER The use of an extension cord is not recommended or advised it is necessary to use an cord use only extension a three-prong extension code (one to one, and a three slot bu n GFCI receptacle that will accept the plug on this product. The marked rating of the extension code should be equal to or greater than the electrical rating of the un (Oamp), Consult a licensed electrician you are not sure whether the unit is preperly grounded. REMARK Instruction and caution statements for cleaning, user maintenance, operations recommended by the manufacturer, such as lubrication or nonlubrication, and a warning to the user that any other servicing should be performed by an authorized service representative or that the product has no user serviceable parts. 7 Structure and name of the product Front view Bottom view Seat cover Caution sticker Body Warm air vent Seat sensor Control panel Nozzle Posterior cleansing hole Feminine cleansing hole Lighting Air inlet for Deodorization Main unit release button Main unit water inlet Mounting plate assembly area Power cord Air outlet for Deodorization Product size 6.1 inch
(154mm) 15.8 inch
(402mm)
5 3 7 1 m m
) 2 1 1
. i n c h Main unit water inlet Accessories Mounting plate guide Mounting plate ( 2pcs ) Mounting bolt ( 2pcs ) Optional Water tank hose T-valve
( Includes packing ) Rubber expansion( 2pcs ) User manual Remote control
& holder Water feed hose Optional Water filter User manual Battery AA Size( 2pcs ) Toilet hose is sold separately according to the installation environment and consumer needs. For purchase inquiries, please contact the seller. 8 How to install Precautions before installation Be sure to check the product and outlet voltage before installation. (Check AC120V) If electrical work is required, consult a qualified electrical contractor ;
Be sure to ground the outlet to prevent short circuit or electric shock. Never connect power until installation is complete. Check the water supply valve in the bathroom Check the water supply valve in the bathroom. Parts other than accessories may need to be purchased separately. Consult your dealer if necessary. If only the accessory branched T-valve is required If you need separate parts Contact a professional contractor or place of purchase. Special water supply valve for toilet, flush valve, and piping (direct toilet) require professional construction. General water supply valve General water supply valve
(handle) Inner screw water supply valve Installation Procedure Turn the water supply valve to the right to close it and disconnect the toilet hose connected to the toilet water tank. Install a branched T-valve where the toilet hose is disconnected. Toilet hose T-valve Water supply valve Reconnect the disconnected toilet hose to the T-valve. Remove the existing toilet seat. T-valve Toilet hose Toilet seat Nut Toilet bowl Please keep the removed toilet seat and parts as they will be needed for restoration. Water supply valve Connect the hose after checking whether there is a rubber packing on the hose connection part.(Assembling without rubber packing may cause water leakage.) Warning 9 How to install Install the mounting plate guide on the toilet bowl.
(1) Insert the "rubber expansion" into the toilet hole.
(2) Install the mounting plate guide correctly.
(3) After inserting the washer on the bolt, use a + screwdriver to fix it to the rubber extension. When securing the body to the mounting plate guide, be careful to center it well on the toilet bowl Warning If the "rubber expansion" does not insert into the toilet hole, apply detergent or soapy water and insert it. If the bolts become loose after prolonged use, re-tighten them. Rubber expansion
+ screwdriver Mounting bolt Mounting plate guide Mounting plate Install the bidet body.
(1) Hold the bidet with both hands and slide it into the mounting plate guides until you hear a click sound.
(2) Check that the main body does not come off when moving it forward, backward, left or right. The bidet can be easily removed from the toilet by pulling the bidet body forward while pressing the bidet release button. Models without water filter
(1) Connect the branch T-valve and the bidet body with the bidet water feed hose.
(2) Check for leaks by opening the water supply valve. Main unit release button 8 Models with water filter
(1) Connect the branch T-valve and the bidet body with the bidet water feed hose.
(2) Check for leaks by opening the water supply valve.
(3) The connected water filter adjusts its position so that it is not inconvenient when opening and closing the water supply valve.
(4) If it is difficult to connect the water filter to the branch type T-valve. due to space problems, please use it by connecting it to the static pressure valve of the bidet body. Warning Connect the hose after checking whether there is a rubber packing on the hose connection part.
( Assembling without rubber packing may cause water leakage. ) Water tank Water tank Water filter Water feed hose T-valve T-valve 10 Operation check and maintenance Operation check 1 Open the water supply valve so that water can be supplied to the bidet body. Check the piping connections for water leaks. If a leak is confirmed, close the water supply valve, repair the leaking part, and then install it again. 2 Insert the power plug into the outlet.
(1) When the power plug is inserted, the indicator light on the control panel display turns on and the product prepares for operation with a ding sound.
(2) Touch the seat sensor sticker to activate the seat sensor.
(3) Press the "Rear" button on the remote control to check if the cleaning function works normally. When the nozzle comes out, use your hand to prevent water from splashing around.
(4) After confirming that the water comes out, press the stop button to stop the operation. When the product installation is complete, plug in the power plug. Warning When checking the operation of the seat sensor, make sure that water does not splash. Maintenance Mesh filter cleaning Regular cleaning of the mesh filter can prevent the water pressure from weakening. The mesh filter is located inside the static pressure valve of the bidet body. After closing the water supply valve, disconnect the bidet water supply hose connection and remove foreign substances from the mesh filter inside the static pressure valve. Water filter replacement Seat sensor Mesh-filter Main unit water inlet If the water filter is dirty or clogged, the water pressure may drop or it may not work. After closing the water supply valve, disconnect the water purification filter connected to the branch T-valve and the bidet water feed hose, and then connect a new water filter. After replacing the water filter, open the water supply valve and check for leaks and operation. Water feed hose Bidet cleaning When cleaning the bidet, be sure to disconnect the power plug, and be careful not to let water come into contact with the plug and outlet. Remove the contaminated area with a soft cloth, etc., and do not use a scrubber, benzene, thinner, bleach, or detergent. After cleaning, use a soft dry cloth to remove moisture and connect the power plug. Winter bidet management (freeze prevention) If the toilet is exposed to the outside, keep the room temperature in the bathroom so that it does not drop below freezing in winter season. The freeze prevention function of the bidet prevents freezing by automatically raising the water temperature to 68(20) or higher or flowing water through the nozzle cleaning hole for about 30 seconds when the internal temperature drops below 41(5). 11 How to use Use the toilet seat temperature at level 1 or level 2 when used by persons requiring attention as follows. Children, the elderly, people with weak skin, or taking sleep stimulants (sleeping pills, cold medicine), etc. may cause low-temperature burns or accidents, so be careful. Sit on the toilet seat. Sit in close contact with the seat sensor of the toilet seat. It won't work if you're wearing clothes and sitting or the seat sensor is not in contact with your skin. Stop Press "Stop" to stop "Rear/Move", "Front/Move", "Dry", "Nozzle Clean", "Rhythm Massage" and
"Kids" functions. Rear/Move Front/Move It is used for Rear ( Posterior ) cleaning or Front ( Feminine ) cleaning. Press the button once more and the nozzle moves back and forth to clean. The function works for 5 minutes, and the sitz bath can be washed at a constant temperature. Dry Dry with warm air for 3 minutes and automatically stop. It stops working when you get up from the toilet seat or press "Stop". Prior to drying operation use tissue to reduce moistures. It will help reduce drying time. Nozzle Position Press "" (forward) or "" (backward) to adjust the nozzle position from 1 to 5 levels. Each time the nozzle position is changed, the nozzle position is displayed for 3 seconds, and after 3 seconds, it returns to the water pressure control display. For "Rear" or "Front" operation, the nozzle position is executed from the last set position. When the product is shipped, it is set to 3 levels. LED lighting steps :
Forward - Backward 1level 2level 3level 4level 5level Water Pressure Press "+"(High) or "-" (Low) to adjust the water pressure level from 1 to 5 levels. When the product is shipped, it is set to 3 levels. The water pressure level works with the water pressure set before use. LED lighting steps :
High-Low 1level 2level 3level 4level 5level 12 How to use Dry Temp Press "+ "(High) or "-" (Low)" to adjust the drying temperature from 1 to 6 levels. The water pressure LED will switch to the drying temperature indication. When the drying function is stopped, the water pressure setting LED is displayed. When the function is activated, it operates at the drying temperature set before use. LED lighting steps:
High-Low 1level 2level 3level 4level 5level 6level Water Temp The warm water temperature can be adjusted in 4 levels. LED lighting steps:
High Low 1level 2level 3level 4level Freeze protectionWhen the water outlet temperature drops below 41F(5C), it automatically raises the water outlet temperature to 68F (20C) or higher or runs water for up to 30 seconds to prevent freezing. Seat Temp The seat temperature can be adjusted in 4 steps. LED lighting steps:
High Low 1level 2level 3level 4level Low-temperature burn preventionIf the seat temperature is above 98.6 (37) after 10 minutes of sitting, the low-temperature burn function is activated to reduce the seat temperature to 98.6 (37) to prevent low-temperature burns. Depending on the ambient temperature of the bidet, the toilet seat temperature may also change. When not using the bidet, closing the cover prevents the seat from getting cold and saves electricity. Nozzle Clean Nozzle Clean (Manual) - without sitting on the toilet Press once Double press : The nozzle moves forward and stops. At this time, use a soft brush to clean
: Clean the nozzle-tip by spraying hot water for 1 minute. the contaminated area. After 5 minutes of manual cleaning, or press "Stop", the nozzle will return. If you press the nozzle cleaning button while sitting on the toilet, only the tip of the nozzle will be automatically cleaned and the operation will stop. Nozzle Clean (Automatic) Automatically cleans the nozzle before starting the "Rear/Front" function. After the "Rear/Front" function is finished, the nozzle tip automatically moves back and forth twice to spray hot water into the nozzle to clean the nozzle. 13 How to use Rhythm massage When you press the rhythm massage, Soft cleaning, Impact massage, Soft cold and hot massage, Impact cold and hot massage, Finish rinse cleaning are performed for 5 minutes. Rhythm Massage is a Rear only function and cannot be used with Front or Kids functions. Smart Care The temperature of "warm water, toilet seat, and drying" is automatically adjusted, so even users who are not familiar with temperature control, such as children and the elderly, can use it safely and conveniently. Press once : The smart care LED turns on and the temperature is automatically adjusted. Even when Smart Care is in operation, it can be used by adjusting the water temperature, seat temperature, and dry temperature. Press again to turn off the LED, stop the smart care function, and switch to manual mode. Kids The nozzle position is set in 5 level according to the body shape of the child. Water pressure (level 1), water temperature (level 2), and drying temperature (level 2) start at a low level. Children's "Rear" washing is operated in the form of a move, and if you press "Front" during operation, it is converted to a children's bidet. Eco / Power Press once : The LED turns on and Eco mode is set, and the toilet seat temperature is set to 77F (25C). Double press : The LED is off and Eco mode is released. Press and hold : If the button is pressed for more than 3 seconds, the power to all LEDs and heating parts is cut off. Press repeatedly to turn the power back on. When using Eco mode on a cold day, the toilet seat may initially be cold. Deodorize (KL600 only) Press once : The fan runs for 3 minutes to remove odors through the filter. Press repeatedly to cancel deodorization mode. Night light mode When the sensor detect light and beams dark, it automatically turns on the light and automatically Convenient function ( Operate with the remote control ) Disable night light function : Press "Stop" and "Rear" at the same time for more than 3 seconds. Silent mode :
Press "Stop" and "Front" at the same time for more than 3 seconds. Seat sensor release : Press Stop and Water Pressure - at the same time for more than
* Press repeatedly to switch functions. 3 seconds. 14 Remote control model function table Remote control Battery Control panel Front/Move ( Feminine ) Rear/Move ( Posterior ) Stop Light Sensor Remote control model function comparison table Features may vary by model. Division KL600 KL601 Cleaning method Instantaneous warm water Instantaneous warm water Cleaning function Cleanliness hygiene function Comfortable convenient function Safety function Rear cleaning Front cleaning Move cleaning Bubble cleaning Rhythm massage Nozzle cleaning Nozzle structure Nozzle material Deodorization Water filter (optional) Remote control Smart care Night light Nozzle position adjustment Power saving Water temperature control Seat temperature control Drying temperature control Water pressure control Seat soft opening and closing Kids Simple body detachment Seat sensor Self-diagnosis Low-temperature burn prevention Freeze protection O O O O O O Single nozzle Stainless steel O X RF Type O O O O O O O O O O O O O O O 15 O O O O O O Single nozzle Stainless steel X X RF Type O O O O O O O O O O O O O O O Troubleshooting Please check before applying for service. Problem No water is coming out. Checklist Check the water supply shutoff. Check that the water supply valve is closed. Check if the mesh filter (water filter) is clogged. The product is not working. Check that the power plug is plugged into an outlet. Check when to replace the batteries on the remote control. Check if the Eco/Power status of the remote control is off mode. If the filter is clogged, water will not be supplied and it will not work. If you do not sit on the toilet seat, the seat sensor does not detect it and the product does not work. Water is leaking. Check the piping connections and in case of body leakage, contact the place of purchase. The washing water pressure is weak. When the toilet seat and cleaning water are not warm Check the mesh filter ( water filter ) for foreign objects. Make sure the warm water and toilet seat temperature settings are turned off. Check if the set temperature is set low. If the toilet seat is not warm, check if the power saving mode. Nozzle does not move. Check that the power plug is plugged into an electrical outlet. If the nozzle does not work even when the cleaning or bidet function button is pressed, contact the dealer. When drying is not warm The main unit is shaking. When drying stops in the middle Make sure the drying set temperature is off. Check if the set temperature is set low. Tighten the mounting bolts, which are installation accessories. The drying function stops after a certain period of time. Press the dry button once more. It will not work if you are sitting while wearing clothes or if the seat sensor is not in contact with your skin. (Except when using the "Kids" function)
. 16 Specifications Model No. Rated voltage KL600 KL601 120V~, 50-60Hz Rated power consumption 1 450W Length of Power cord Water supply method about 4.9ft ( 1.5 meters ) Direct inlet flow type Requested water pressure range 10.15-108.8 psi ( 0.07-0.75MPa ) Water supply control Heat exchange system Water volume Rear cleansing Front cleansing Water pressure control Static pressure solenoid valve Instantaneous heating method 0.13-0.18 gal/min ( 0.5-0.7L/min ) 0.13-0.18 gal/min ( 0.5-0.7L/min ) 5 Levels ( Rear / Front ) Warm water temperature control 4 Levels [ OFF (1 Levels) - 4 Levels ]
Nozzle position control Water heater capacity 5 Levels 1 400W Safety device Temperature sensor, Bimetal, Temperature fuse Toilet seat temperature control 4 Levels [ OFF (1 Levels) - 4 Levels ]
Seat heater capacity Safety device 50W Temperature sensor, Temperature fuse Warm air temperature control 6 Levels [ OFF (1 Levels) - 6 Levels ]
Warm water cleaning device Heated toilet seat device Drying device Drying heater Safety device Deodorization Air bubble cleaning Remote control Seat sensor Etc Lighting function Water filter Body material Requested water temperature range 290W Bimetal, Temperature fuse Activated carbon O X O RF Type ( battery : 2 AA size ) Capacitive sensor High Brightness Blue LED Option / Sediment Filter PP 41 - 95 ( Recommend 50 - 86 ) 5 - 35 ( Recommend 10 - 30 ) Product size
(W x L x H) Elongated Round 15.8" 21.1" 6.1" ( 402mm 537mm 154mm ) 15.8" 19.8" 6.1" ( 402mm 504mm 154mm ) Product weight ( Net ) 7.49lb (3.4kg) 7.27lb (3.3kg) These specifications are subject to change without prior notice 17 Warranty Card Warranty Card Thank you very much for purchasing this product. The product is warranted according to the description written on this warranty card. Please submit this warranty card to service center when there are malfunctions. Model :
Serial NO :
Purchaser Company :
Address :
City :
Phone :
Dealer (Company) Address :
Purchase Date :
Country :
Fax :
E-mail :
Installation Date :
When a fault occurs in the case of normal use from purchase date (subject to the invoice), you can enjoy free maintenance service within one year. Notice :
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. If the product malfunctions due to impurities. When the product was thrown or hit and cause damage or malfunction. Use of an organic solvent such as thinner cause deformation or deterioration of appearance. When using non-genuine parts or consumable caused by fault. When using non-normal voltage caused by fault.
( Example : When using 220V power for 120V product ) When customers disassemble the product, resulting in lost or damaged parts. When repair or modify through non-designated service center technician caused malfunction. When a fault occurs due to natural disasters. (Lightning, fire, earthquake, flood, etc.) When due to not following the instruction caused malfunction. Other conditions due to customers' intentional or negligent caused fault. Damage caused by accident, misuse, or abuse is not covered by this warranty. Improper care and cleaning will void the warranty. Proof of purchase (original sales receipt) must be provided to Intertec Co. with all warranty claims. Intertec Co. is not responsible for labor charges, installation, or other incidental or consequential costs other than those noted above. In no event shall the liability of Intertec Co. exceed the purchase price of the electric cleansing seat. Please be sure to provide all pertinent information regarding your claim, including a complete description of the problem, the product, model number, the date the product was purchased, from whom the product was purchased and the installation date. This warranty is to the original consumer purchaser only, and excludes product damage due to installation error, product abuse, or product misuse, whether performed by a contractor, service company, or the consumer. Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents or other products not recommended for stainless steel or polypropylene plastic. The foregoing warranties are in lieu of all other warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Intertec co.,Ltd. and / or seller disclaim any liability for special, incidental or consequential damages. Please keep the warranty as it will not be reissued. Intertec Co., Ltd. https://intertec.co.kr 18 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment Warranty Card Warranty Card Warranty Card Address : 15, Dongtangiheung-ro, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel : +82-31-8015-2620. Fax : +82-31-8015-2625 https://intertec.co.kr
1 | Internal Photos | Internal Photos | 1.96 MiB | March 10 2023 / September 06 2023 | delayed release |
1 | External Photos | External Photos | 1.14 MiB | March 10 2023 / September 06 2023 | delayed release |
1 | Label and Label location | ID Label/Location Info | 118.59 KiB | March 10 2023 |
Page 1 of 2 IDENTIFICATION LABEL:
PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the bidet cover
[FCC ID Location]
[FCC Statement location]
Page 2 of 2 Authorized Person Print Name: KIM JI HYUN / PRESIDENT Date: March 10, 2023 Signature:
1 | 2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 146.79 KiB | March 10 2023 |
INTERTEC Co.,Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: INTERTEC Co.,Ltd. Address: 15, DONGTANGIHEUNG-RO, DONGTAN-MYEON, HWASEONG-SI, GYEONGGI-DO,
#18487, SOUTH KOREA Product Name: ELECTRIC BIDET SEATS FCC ID: 2A9WE-ITBKLNF04-R01 Model(s): KL600, KL600A, KL600B, KL600C, KL600D, KL600E, KL601, ITB600 2.911(d)(5)(i) Equipment Type We, [INTERTEC Co.,Ltd.] (the applicant) certify that the equipment for which authorization is sought through certification is not:
Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: KIM JI HYUN Title and Company name: PRESIDENT / INTERTEC Co.,Ltd. Date: March 10, 2023 NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;
1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2
1 | 2.911 (d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 142.24 KiB | March 10 2023 |
INTERTEC Co.,Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List
) Company name: INTERTEC Co.,Ltd. Address: 15, DONGTANGIHEUNG-RO, DONGTAN-MYEON, HWASEONG-SI, GYEONGGI-DO,
#18487, SOUTH KOREA Product Name: ELECTRIC BIDET SEATS FCC ID: 2A9WE-ITBKLNF04-R01 Model(s): KL600, KL600A, KL600B, KL600C, KL600D, KL600E, KL601, ITB600 2.911(d)(5)(ii) Applicant filing We, [INTERTEC Co.,Ltd.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: KIM JI HYUN Title and Company name: PRESIDENT / INTERTEC Co.,Ltd. Date: March 10, 2023 NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;
1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3
1 | 2.911 (d)(7) US Agent for Service of Process v1.2 | Attestation Statements | 287.07 KiB | March 10 2023 |
Certification designating a U.S. Agent for service of process:
As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must:
i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicants consent and the designated agents obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicants acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council:
The Agent for Process of Service:
cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) cannot be a [FCC recognized] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) Agent can be Individual Entity or a Company Entity Agent Entity must be located in US, US address/phone Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. INTERTEC Co.,Ltd. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: team@approve-it.net FRN #: 0027533835 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:
Date: March 8, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President
*This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: INTERTEC Co.,Ltd. FCC ID: 2A9WE-ITBKLNF04-R01 Contact Name: KIM JI HYUN Street Address: 15, DONGTANGIHEUNG-RO, DONGTAN-MYEON, SOUTH KOREA City/Province/Zip: HWASEONG-SI, GYEONGGI-DO, #18487 Telephone No: +82-31-205-2223 Email: jhkim@intertec.co.kr Applicant Signature:
Date: March 08, 2023 Signed by (Printed Name/Title): KIM JI HYUN / PRESIDENT
1 | FCC Family Declaration Letter rev.1 | Cover Letter(s) | 418.37 KiB | March 10 2023 |
INTERTEC Co.,Ltd. Date: March 10, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: New Family Listing Declaration Please review the attached exhibits supporting our request for applying New Family Listing to the FCC ID: 2A9WE-ITBKLNF04-R01 for Company Name:
INTERTEC Co.,Ltd. Product Description: ELECTRIC BIDET SEATS Base model: KL600 Additional model(s): KL600A, KL600B, KL600C, KL600D, KL600E, KL601, ITB600 The only difference between the base model KL600 and the additional model(s) KL600A, KL600B, KL600C, KL600D, KL600E, KL601, ITB600 is as follows:
Model Name Differences KL600 KL600A KL600B KL600C KL600D KL600E ITB600 KL601 Basic Model This model is derived for Marketing purpose, It is identical to the basic model. This model is identical to basic model except for removal of deodorization function.
* Details of difference between basic model and KL601:
In the KL601, the deodorization Part (Fan, Filter and Cover) are removed compared to basic model. Deodorization part is as the red box in the below photo. Should you have any questions, please contact us. Sincerely, Name: KIM JI HYUN Title: PRESIDENT
1 | FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 83.87 KiB | March 10 2023 |
INTERTEC Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A9WE-ITBKLNF04-R01 Date: March 10, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, INTERTEC Co.,Ltd. Signature:
Name: KIM JI HYUN Title: PRESIDENT
1 | LetterofAuthorizationRev1.0 | Cover Letter(s) | 18.93 KiB | March 10 2023 |
Letter of Authorization Company:
INTERTEC Co.,Ltd. Address:
15, DONGTANGIHEUNG-RO, DONGTAN-MYEON, HWASEONG-SI, GYEONGGI-DO, #18487, SOUTH KOREA Product Name:
ELECTRIC BIDET SEATS Model Number: KL600, KL600A, KL600B, KL600C, KL600D, KL600E, KL601, ITB600 FCC Identifier: 2A9WE-ITBKLNF04-R01 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: KIM JI HYUN Date: March 10, 2023 Title: PRESIDENT Signature of applicant:
1 | Test Setup photos | Test Setup Photos | 598.84 KiB | March 10 2023 / September 06 2023 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-03-10 | 2403 ~ 2475 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-03-10
|
||||
1 | Applicant's complete, legal business name |
INTERTEC Co.,Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0033236936
|
||||
1 | Physical Address |
15, DONGTANGIHEUNG-RO, DONGTAN-MYEON
|
||||
1 |
HWASEONG-SI, GYEONGGI-DO, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2A9WE
|
||||
1 | Equipment Product Code |
ITBKLNF04-R01
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** K******
|
||||
1 | Title |
PRESIDENT
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
s******@gmail.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
INTERTEC Co.,Ltd.
|
||||
1 | Physical Address |
South Korea
|
||||
1 |
j******@intertec.co.kr
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/06/2023 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | ELECTRIC BIDET SEATS | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ONETECH Corp.
|
||||
1 | Name |
K****** N********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
k******@onetech.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2403.00000000 | 2475.00000000 | 0.0008300 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC