all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
users manual 1 | Users Manual | 3.52 MiB | ||||
1 |
|
users manual 2 | Users Manual | 2.87 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Schematics | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | users manual 1 | Users Manual | 3.52 MiB |
Installation Manual 1. Hardware Installation 2. Software Installation
User Manual 3. User Manual- Server 01. Main Program 02. Search Program 03. AVI Backup Manager 04. Backup Manager 4. User Manual- Client 01. NetClient Program 02. WebClient Program
Annex Annex 1. I/O Device Annex 2. Dynamic IP Annex 3. IP Router
Installation manual - Software Installation 5. I/O Board Installation 5-1. Prepare Sensor, Alarm, I/O Board and I/O Extension Board for I/O Board Installation.
< 8 port In/Out Connection>
A : Industrial Case System can use In/Out port separately when additional Back Panel is available.
< 16 port In/Out Connection>
To use 16 port In/Out, A : Slave Board must remove jumper. B : Master Board must install jumper.
1. Software Installation You can install SmartDVR Software by using SmartDVR Formula CD or downloading from INTOTECH website, www.intotech.co.kr. Software CD consists of Server Package (Main program, WebClient program, Apache HTTP Server program), Client Package (NetClient program) & AVI Codec. User Manual is also available from SW CD.
[Main Program Installation]
Insert SmartDVR Formula CD into CD-ROM drive or run DvrSetup.exe file; the following installation screen will appear . Click the icon below and Main Program installation will automatically proceed. Installation Step : Apache HTTP Server (Web Server) ->
WebClient -> SmartDVR Formula
Installation manual - Software Installation 1. SmartDVR Apache HTTP Server (Web Server) Installation
Installation wizard tool will appear. Click [Next]. 1-3 Click [Next] after checking server information of Apache HTTP Server. 1-2 Read the License Agreement and if you agree to the contents, select [I accept] and click [Next].
Insert Network Domain, Server Name, Administrators E-mail Address.
(This procedure is only a formality. In general cases, follow example) Select [Run as a service for All Users Recommended]
and click [Next].
Installation manual - Software Installation 1-5 Select Setup Type as [Complete] and click [Next]. 1-7 After the setting is finished, click [Install] and start installation. 1-6 Click [Next] without change of setting. Note: Do not change 1-8 After the installation is done, click [Finish]. the directory!
Installation manual - Software Installation 1-9 After the installation is finished, a message confirming the change of the Server port of Apache will appear. 2-2 Check the contents of License Agreement; if you agree to the contents, click [Yes]. 2 SmartDVR WebClient Installation 2-1 After the Installation Wizard Tool is appeared, click [Next]. 2-3 After the installation is done, click [Finish].
Installation manual - Software Installation 3 SmartDVR Formula Installation
After Installation Wizard Tool is appeared, Click [Next]. 3-3 After choosing [Destination Folder] for installation, click
[Next].
Check the details of License Agreement; if you agree to the contents, click [Yes]. 3-4 After the installation is done, click [Finish].
Installation manual - Software Installation 3-5 Driver Installation: Wizard automatically installs drivers according to each board type. 5 NetClient Installation 5-1 After the Installation Wizard Tool is appeared, click [Next]. 3-6 Reboot PC after all the installation. 4. SmartDVR Formula Uninstallation 4-1 Goto [Start] [Control panel] and click [Add/Remove Program]. 4-2 Select [SmartDVR Formula] and click [Change/Remove]. 5-2 After choosing [Destination Folder] for installation, click [Next]. Click the icon below and NetClient Program installation will proceed.
Installation manual - Software Installation 5-3 After the installation is finished, click [Finish]
AVI Codec Installation Click the icon below and AVI Codec installation will proceed. 7-1 AVI Codec Installation diagram. 6 NetClient Uninstallation 6-1 Goto [Start] [Control panel] and click [Add/Remove Program]. 6-2 Select [NetClient Plus] and click [Change/Remove]. 7-2 After the installation is finished, click [Finish].
User Manual - Main Program 3 Main Program 01. Main Program Main Program enables users to monitor images through PC monitor. The main program supports the following functions: record images, search & playback images and control camera remotely. Image can also be transmitted over the network to any remote site.
<Main Program>
1 : Control Panel 2 : Screen Partition Panel 3 : Pan/Tilt Control Panel 4 : Camera Selection Panel 5 : Audio Volume Control Bar 6 : Status Information Panel
1-1 Control Panel Control Panel consists of the following icons: This enables users to run search programs, manually record images and open configuration window. Configuration Icon Recording Icon
Search Icon
Lock Icon
All Icon
- Search Icon: Search Option.
- Configuration Icon: To change setup of program.
- Lock Icon: Supports password lock function for Server security.
- Recording Icon and All Icon:
Record only certain channels Enable users to manually select certain channels for recording. Record all channels Click [All] icon and click [REC] icon to record all channels. 1-2 Screen Partition Panel Support 7 kinds of various screen partitions, full-screen and sequence rotation display mode etc. 1-3 Pan/Tilt Control Panel Use of Pan/Tilt Camera, 1.Select correct [Receiver] protocol from
[Configuration]. 2. Select the channel which is connected to Pan/Tilt camera. 3. Click various buttons from Pan/Tilt Control Panel to control camera.
(Pan/Tilt/Zoom/Focus).
[Screen Partition Panel]
Pan/Tilt
Zoom/Focus Button
User Manual - Main Program 1-4 Camera Selection Panel Click specific channel from Camera Selection Panel to enlarge and view images. 1-5 Audio Volume Control Bar If Audio input is configured from
[Configuration] - [General], audio volume can be controlled from Audio Volume Control Bar.
1-6 Status Information Panel Indicates number of connection from Internet( T C P ) & modem. Disk Full will be indicated in red color if there is no space left in HDD.
2 Configuration Configuration Folder consists of [General], [Channel], [Store],
[Network], [Schedule], [Maintenance], [Event], [Receiver], [Video Out] and [User Management] sub-panels. Configuration is used for setting Resolution, Image Quality, Motion Detected Recording, I/O, Schedule, Pan/Tilt Receiver Protocol, Network IP setup, etc. 1-1 General Start Section
- Auto Start: DVR program automatically executed when system is turned on.
- Max size at starting: DVR Program is setup as the exact size of monitor resolution to prevent display of other programs. Exit Section Option: Only DVR program shuts down after closing DVR Program OR the complete system shuts down.
(Computer Power OFF).
User Manual - Main Program Audio Input Setup the Gain of Audio Input.
- AUD1 ~ AUD8 is gain control for Audio Input from Capture Board. Set the gain to minimum(0) when use of amplified mic. (e.g.: camera built-in mic)
- Snd Card is audio volume control using Sound Card as output device. Video/Audio Setup
- Setup Camera Input Type NTSC Korea, USA, Japan, Australia(some region), North Amercia(some region) etc. PAL Region excluding NTSC area(China, Europe, South America, etc.)
- Channel Selection Select channel for surveillance
- Resolution Setup Image Resolution Setup(320X240 OR 640X480) 2 Channel Channel(Caption) Input Insert description of camera surveillance area Caption Setup
- Surveillance Mode Setup to indicate channel number and camera surveillance area caption in Main Program.
- Search Mode Setup to indicate channel number and recorded time in Search Program.
Caption Font and Color Setup Setup caption font & color of caption according to channel number, camera surveillance area, recorded time etc.
Video Source Setup Brightness, Contrast, Hue, Saturation and Sharpness.
Installation manual - Hardware Installation
Please check contents before installation: DVR Board, Extension Cable, Audio & PTZ Installation, etc., if you are missing any parts please contact your local dealer. 1. DVR Board & Extension Cable Installation 1-1. Insert the DVR Board to an empty PCI Slot in DVR PC.
1-2. Use Extension Cable to connect cameras.
2. DVR Audio Installation 2-1. Prepare DVR PC and MIC. 2-2. Connect the MIC to the Mainboard MIC Port of DVR PC OR the Audio IN port on DVR Board. Please connect the Speaker to the back panel of DVR PC.
Either connect the MIC to Audio IN port of DVR Board OR Mainboard MIC port.
- H Board: Connect the 4CH MIC(B) to DVR Board(A) starting from the left.
Installation manual - Hardware Installation
- HP Board: Connect the 8CH MIC(B) to DVR Board(A) starting 3. P/T/Z Installation from the top.
3-1. P/T/Z Cable
[A] Cable : Connect to COM port of DVR PC
[B] Cable : Connect to DVR Board
[C] Cable : Connect to Receiver Cable
- RC Board: Connect the 4CH MIC(B) to DVR Board(A) starting from the left. 4. Real Display(RD) Board Installation 4-1. Insert the Real Display Board into an empty PCI Slot in DVR PC. 4-2. Use Cable to connect Real Display Board with DVR Board.
Real Display Board cannot be used alone, it must be used with S, H, HPLUS DVR Boards.
User Manual - Main Program 2 Store 3 Network
Store Disk Indicates installed HDD Capacity. Check() HDD to use as recording device Notice) Recommend to disable C Drive(Operating System installed) as recording device and use other drives(D, E, C).
Overwrite Setup overwrite to delete the oldest data when free HDD is lesser than minimum free space allowed.
Setup compression quality & max stored-frame per second. Recording size of 1 frame according to image quality &
resolution is as followings:
Image Quality Recording Size(KB) Low Low Medium Medium High High Resolution 320X240 640X480 320X240 640X480 320X240 640X480 2.5
Watermark Use Watermark to prevent image tampering of every recorded frame.
- Default: Watermark will be inserted as the word VR.
- User Define Mark: Watermark will be inserted as user defined word for easy identification or organization.
Server Setup
- Enable the Network Server: Setup System to be used as Internet Server. Server image can be viewed from remote Client Program OR Internet Web Browser by using private line connected to internet.
- Enable the Modem Server: Setup System to be used as PSTN Network Server. Server image can be viewed from remote Client Program by using modem connected through PSTN Network(Internet Web Browser not supported.).
Network Information System IP Address & MAC Address
- Direct connection to Server is possible from remote Client Program OR Internet Web Browser when use of Fixed IP.
- Direct connection to Server is possible through DHS Server from remote Client Program by using DHS Service provided by our company when use of Dynamic IP.
User Limit
- IP Router User: Check [User of Sharing IP] if DVR System is connected to internet using IP Router.
- Register Dynamic IP User ID: ID must be registered to use DHS Service when use of Dynamic IP. Contact our company for more detailed information regarding Dynamic IP.
User Manual - Main Program 4 Schedule 5 System Auto Reboot Recording Modes: Full Recording, Motion Detected Recording, Sensor Recording is possible for a specific date, time and channels. e.g.) Setup Recording Schedule for Monday 0~12 hour, Setup Motion Detection Recording Schedule for Tuesday 13~23 hour, Setup Sensor Recording Schedule for Wednesday 0~24 hour. Setup specific time to automatically reboot system.
User Manual - Main Program 6 Event 7 Receiver
Sensor Input
- Check [Enable the Sensor] and configure the channel of camera and sensor input channel.
Enable Event Recording
- Use Digital Output OR auto-recording when there is sensor input signal. e.g.) Configure 1,2,3,4 Sensor Input for CH1 Camera & 5,6,7,8 Digital Output. Enable Event Recording & Warning Sound from speaker.
Motion Detection Motion Detection Area Setup, Motion Detection Sensitivity Setup Setup MD Area: Setup rectangular area in screen using the mouse. Motion Display: Indicate the specific area by changing color when motion is detected. Motion Recording: Record when there is movement in image
Port Setup: Select serial port to use PAN/TILT Camera OR Receiver.
Device Type: Select protocol of receiver from Device Type Panel. 8 Video Out Video Out function can be used by Loop-Through to analog monitor.
Enable the TvOut Rotation :
One channel can be viewed during the directed time gap or various selected channels can be viewed in timed sequence.
Single Mode : Only the selected one channel is viewed
User Manual - Search Program 9 User Management 02.Search Program Search Program allows users to search by time/date & play recorded images and audio. Support saving of still image by .bmp format, printing of still image, watermarked .bmp file of each image. User Managemet can give different authorization levels for management in accord to user IDs.
Insert & Modify User Information Insert ID & Password and click
[Modify User Information] icon to add new user.
Accessible local Functions Function to manage DVR System in installation site Support setup for all the functions of DVR.
Accessible Network Functions Setup of only limited function is available for users connecting from outside using client program
Accessible Channels Direct only certain channels to be viewed according to user IDs. 1-1 Control Panel
Serveillance Mode Icon
Load Data Icon
Watermark Viewer Icon Save Icon Print Icon
- Surveillance Mode Icon: Exit search program and converts to Survillance Mode(Main Program).
- Load Data Icon: Open Calendar for loading data.
User Manual - Search Program Calendar 1-2 Playback Control Panel 1-3 Screen Partition Panel MD ONLY Icon: Load Motion Detected data only. LOAD Icon: Load data of selected date from calendar.
- Save Icon: Save image of selected channels
- Print Icon: Print image of selected channels using printer. Print Channel: Select channel for printing images. Option: Print image with caption OR goto printer setup. Print Type: Setup print layout Watermark Viewer Icon: Run Watermark Viewer. Watermark Viewer Open saved .bmp file to check if there is any image tampering &
check if watermark is identical with original image.
Supports playback options: 1x, 4x playback, reverse playback, frame by frame playback. 1-4 Data Search Process Bar Support 8 kinds of various screen partition display. Hour Button Minute Bar
- Hour Button: Recorded data of selected hour is indicated in red color.
- Minute Bar: Minute of recorded data is indicated 0~59min. and recorded data is indicated in red color. 1-5 Search Audio Volume Control Bar Control audio volume when replay of recorded data.
1 | users manual 2 | Users Manual | 2.87 MiB |
User Manual - DVR AVI Backup Manager 1-4. Backup Time Selection Enter the time you wish to start backup from Time Bar. Recorded data is indicated in red. Click the start time and click [A->B] icon. Start time will automatically appear as below. Select the location of the directory to backup data and click [OK]. Click the end time and click [A->B] icon. End time will automatically appear as below. AVI Backup Processing
AVI BackUp Manager can only convert files up to one hour. Backup data time is only indicated when the difference between start time & end time is less than one hour. 1-5 Backup Data Converting Click [Converting] icon after entering the limits of the backup time in reference. Windows prompt message indicating AVI Converting End will automatically appear. You have successfully converted your data for storage.
User Manual - Backup Manager 1-6 Play Backup Data using Windows Media-Player Our website offers utilities that users can Download & install AVI Formula Codec V 1.0 from www.intotech.co.kr, DownLoad -> Util section to properly replay stored data. You can now replay all AVI format data using your Windows Media Player . Media Player should replay stored data as seen below.
04.Backup Manager Using Intotech Backup Manager recorded images(* iva. data) can be managed efficiently or quickly backup to CD using this software.
[Backup Manager Detailed Information]
Backup Manager illustrates recorded data by date, channel and time.
The following icons are used to help manage your recorded data.
: Transfer data to Backup List.
Remove data from Backup List.
: Remove all data from Backup List.
: Search screen will be displayed in (YUV) screen mode. (Default setting)
: Search screen will be displayed in (RGB) screen mode. Graphic Card may not support YUV mode YUV is the default setting. (Please convert to RGB mode when transferring or removing data .)
: Play Backup Data.
: Start Backup.
: Stop Backup.
User Manual - Backup Manager Add data to Backup List illustrated below.
Click Backup Manager icon to run program. 1-2 Select date & time from Data List to Backup. Backup folder & Progress Time Bar is indicated as follows. Ex) Indicates 2004/ 2/ 7 CH2 10 oclock.
: Select directory to backup
: Direct backup to CD (CD-RW required) 1-3 Move selected data from Data List to Backup List. Click ( ) icon to move data from Data List to Backup List.
Backup Manager HDD Backup 1-4 Click 1-5 Choose HDD to backup and click [OK].
icon to setup backup directory. Example selects C: Drive.
User Manual - Backup Manager 1-6 Click
icon to start backup.. 1-7 Message is displayed after completion. 2-3 Move selected data from Data List to Backup List. Click
icon to move data. 2 CD Backup 2-1 Click Backup Manager icon and run program. 2-2 Select date & time from Data List to Backup. Ex) Indicates 2004/ 2/ 7 CH2 10 o lock.
Click
icon. 2-4 Click [CD RW] and click [Contain Backup Player].
(NOTE : The Contain Backup Player(7MB) must be checked.) 2-5 Click
icon to start backup
User Manual - Backup Manager 2-6 Message is displayed after completion. 3-4 Search Data screen illustrated below. a. Recorded data is shown in red. 3 Play HDD Backup Data 3-1 Click Backup Manager and run program.
3-5 Choose date you want to playback and Click [Load]. 3-2 Click [Play] icon to search Backup Data Directory.
3-3 Select RGB Mode and select directory and Click [OK].
User Manual - Backup Manager 3-6 Click icon to exit from playback mode and return to Backup Manager.
Set CD recorder failed.
: Conflict with CD-RW settings.
Not Enough Hdd Disk Free Space to Create CD IMAGE
: HDD must have enough free space to CD backup data onto CD.
The call failed because IMAPI has not been opened with Open.
: Your Operating System(O/S) does not support CD Backup. If you have any further tech support issues, please contact your local Intotech DVR dealer. 4. Play CD Backup Data
Insert CD to CDROM. (Run CDROM Drive ->
Backup Player -> Click [ ] icon.)
Select CDROM directory and click [OK].
[The following Error Messages appear usually means the following errors.]
[Error Message]
There is no medium in the burner
: There is no CD inside CD-RW drive.
If you want to Backup CD. Please reboot or end process imap.exe
: Please reboot PC OR stop Task Manager. imap.exe by force from Windows
User Manual - NetClient Interface 4 NetClient Interface 01. Intotech Net-Client Interface NetClient Program is able to receive images from DVR Server using the Internet. NetClient functions: Display & recording, camera control from remote site and other features that we will illustrated in this document.
Control Panel The Control Panel can search program, open connection setup, save & print still images and record server image from remote PC where NetClient is installed. Save Icon
Search Icon Connection Setup
Print Icon REC Icon
All Icon Search Icon: Runs search program. Connection Setup Icon:
Run [Connecting & Configuration Management] used for internet access. Run [Modem Connection] used for internet access .
Save Icon: Save selected channels as JPEG file. Print Icon: Print the selected channels in various modes. REC Icon: Record the image of selected channels. All Icon: Select all channels to record. 1-2 Screen Partition Panel Support 7 kinds of various screen partition, full-screen and sequence rotation display mode. 1-3 Pan/Tilt Control Panel Pan / Tilt / Zoom / Focus control is supported from remote site when DVR Server is using Pan/Tilt camera. Control sensitivity can be configured in Control Panel. Only broadband Internet users can use Pan/Tilt control, Modem users cannot use this feature. 1-4 Network Type Selection Panel Select [LAN] from Network Type Selection Panel when using broadband connection and Select [Modem] when using Modem. 1-5 Camera Selection Panel Click specific channel from Camera Selection Panel to enlarge and view image.
User Manual - NetClient Interface 1-6 Internet User Real-Time Surveillance Click [LAN] from [Network Type Selection Panel] and view real-time from remote site. Click [Connection] from [Control Panel] and [Connecting & Configuration Management] screen will appear. Register the Server IP Address and connect using the registered IP. 2. Channel Connection Register the Server and use the registered server to connect to each channel. 2-1 Server Registration
- Server has Fixed IP(Static IP) Select the [Fixed IP] from [Connecting & Configuration Management] insert the Server Name, IP Address, ID &
Password(Insert the ID & Password which is registered in the Server program [User Management].) and click [Register].
Server is using Dynamic IP Register for DHS Service,(http://www.chainip.com )*Refer to Annex. Select [Dynamic IP] from [Connecting & Configuration Management] and insert the ID from DHS Server. Insert the ID
& Password which is registered in the Server program [User Management] and click [Register]. 2-2 Connection Select [Connect Mangement] and insert the Server Name and Server Channel to each camera channel.
User Manual - NetClient Interface 3 Group Connection Group Connection enable users the convenience of connecting specific channels from different servers at once. 3-2 Group Organization. Click the Server you wish to include in Group from Server List. Specific channels can be selected after you select Server Name from Server List. Select the specific Server channel you wish to include in Group and click [Add Group]. In one group, users are allowed to register up to 16CH from different Servers. 3-1 Group Setup
- Register Group Name Goto [Management of group] and click [Add Group]. Insert the Group Name you wish to use and click [OK]. Group Name will be displayed on left side of Group List. Select the Group Name from Group List.
User Manual - NetClient Interface 3-3 Group Connection Click [Connect group] to connect.
(It will take about 10~30 sec to connect to all channels.) 4 Modem User Connection Setup 4-1 Modem Setup Select [Modem] icon from [Network Type Selection Panel]
to connect from remote site using Modem. Click [Connection] icon from [Control Panel] to run
[Modem Connect] window.
[Modem Connection] window is initialized. Insert Telephone No.(Insert and Telephone No. to the number assigned to DVR Server. Insert add the waiting time while the line is being dialed. E.g.:
9w0232851525), ID & Password, (Insert the ID & Password which is registered in the Server program, [User Management].) Select the camera channel number and click [Connect]. You can only access one channel at one time using Modem. In order to change to different channel, click [Disconnect] from [Modem Connect] window, change channel and reconnect. Note: If You are not using 56K Internet Access, you do not need to access Internet Service Provider. 4-2 Configuration Setup The modem model name will appear when you click
[Configuration]. During intial setup, the Model Name needs to be confirmed to complete registration, thereafter, this step will be bypassed.
Click [Properties] to view General/Advanced default setup. Use default when use of modem.
User Manual - NetClient Interface 5 Search 5-1 Remote Search
Broadband: To search recorded images from remote site, click [LAN] from [Network Type Selection Panel] when using Broadband Internet connection to connect to Server. Click
[Search] Icon from [Control Panel] to run Search program.
Modem: To search recorded images from remote site, click
[Modem] from [Network Type Selection Panel] when using Modem to connect to Server. Click [Search] Icon from [Control Panel] to run Search program.
- Control Panel: Consists of [Surveillance Mode] icon, [Local Search] icon, [Remote Search] icon, [Save Still Image] icon and [Print Still Image] icon. Surveillance Mode Icon: Converts to Surveillance Mode. Local Search Icon: Runs [Local Search] window. Remote Search Icon: Runs [Remote Search] window.
Remote Search
[Remote Search using Internet]
- Server Connection: Insert Server, Connection Port, ID &
Password, Channel number and click [Connect].
- Data Load: Click the date from calendar and click [Load Data].
- Insert telephone no. of Server, ID & Password, channel number and click [Connect].
- Image Output Control Panel: Consists of [Play] & [Stop].
- Screen Partition Panel:
Maximum 4CH search & playback is available from remote site using Broadband. 1CH search & playback is available from remote site using Modem.
- Search Data Process Bar
Hour Bar: If there is recorded data in selected hour, recorded data is indicated in red from minute bar
Minute Bar: Minutes of recorded data is indicated from 0~59min. and recorded data is indicated in red.
User Manual - WebClient
WebClient WebClient can receive the images from remote site & view through the internet without installing any other program. 5-2 Local Search Click [Local Search] from Search Mode, Surface Mode Window will appear. Click [OK] to run Local Search program.
[Local Search] from NetClient Program is similar to the functions from Main Program (Server Program). Refer to the Server Program Manual (Chapter 2: Search Program) for information regarding other featured functions. 1. Connection 1-1 For Fixed IP Users(Static IP) Insert the Server IP Address in Internet Web Browser. e.g.: Insert as http://61.107.32.182:26540 if the Server IP Address is 61.107.32.182.
User Manual - WebClient Message as above will appear if this is your first time connecting through Internet Web Browser. Click <yes> button and it will take a few seconds to load the WebClient program. IP address & Port No. will be automatically retained in the WebClient program. You will be asked to enter ID & Password again for security. Click [Connect] to view image. For Dynamic IP User Insert the ID you have been given then click [Login] button. Message as above will appear if it is your first time connecting through Internet Web Browser. Click <yes> button and it will take a few seconds to load the WebClient program. IP address & Port No. will be automatically retained in the WebClient program. You will be asked to enter ID & Password again for security. Click [Connect] to view image.
User Manual - WebClient Display Mode: There are two modes available: YUV Mode & RGB Mode. RGB Mode uses more overload than YUV Mode. If you are not able to view the images using YUV Mode, update the Graphics Card Driver and if problem persists check whether the Graphics Card supports YUV Mode There are 7 variations of screen partitioning that is supported according to camera number. 1-2 Display Mode 1-3 Screen Partition 1-4 Connection Connect to All Channel (All Mode ) WebClient program is set to All Mode as default. If you wish to view all channels from the Server, click [Connect]
button while it is set to [All Mode]. Connect to specific channel ( Select Mode) If you wish to view specific channels from the Server(Not all channels), convert to [Select Mode] and click [Connect] button. Displayed above, channel selection panel will appear on the right side of WebClient program. Select the specific channel and click [Start] button.
Annex 1. I/O DEVICE
I/O DEVICE 9.1 Input/Output Device Input/Output Control is available from DVR Program [Configuration]
[Event] and it consists of Sensor, (A)ction/Digital Output. 9.2. Channel Selection & Apply All Select channel after preparation of Input/Output Board and other Surveillance equipment. All the surveillance equipment is connected to every channel, and to control all channel, click [Apply All] after setup of [Sensor],
[Action/Digital Output], [Digital Output], [Warning Sound],
[Duration]. 9.3.1 NC
[NC] stands for Normal CloseIf this button is selected, Normally(Event is not occurred) the circuit will be closed. General Sensors are Normal Closebut in case of special sensor which is
Normal Closetype, do not select [NC]. 9.3.2 Sensor Port Control Confirm the video channel of sensor you want to insert, then click [Enable the Sensor]. Setup the sensor port which is connected to SmartDVR I/O Board by each channel. Can use sensor port regardless of digital output number. 9.3 Sensor Input
[Sensor] is equivalent to Digital Input. When there is input signal from outside to selected channel(Sensor is activated, e.g.: When use of fire alarm, sensor is activated when occurrence of fire), selected channel will recognize as occurrence of event.
9.4 Action//Digital Output Action//Digital Output - [Enable Event Recording] will automatically record the image when sensor is activated after an occurrence of event. [Enable the warning sound] will make a warning sound from the speaker.
Annex 2. Dynamic IP User Manual 9.5 Digital Output Confirm the video channel of digital output you want to insert, then setup [Digital Output]. Setup the Digital Output Number by each channel. Can use digital output port regardless of sensor input number. 9.6 Warning Sound Select Wave file to change warning sound. 9.7 Duration Time Setup duration time of Warning Sound using mouse wheel.
Dynamic IP User Manual 1-1 DHS(Dynamic Host Service) DHS service helps support Dynamic IP remote access. Internet Service Provider frequently change IP address when using a standard broadband connection. DHS Hosting Service keeps track of Server ID and updates IP address periodically to support remote access without the need of a Static IP Address. 1-2 DHS Service Registration
- Connect to http://chainip.com from Internet Web Browser. 2 Click [Join Now] and enter information on registration form. 3 Our server manager will contact you within 24 hours after the registration is complete. 4 Connect to http://chainip.com and login with the ID that has been assigned to you.
Annex 3. IP Router
IP Router User Manual For Customers who use Routers inside their intranet environment for PC & DVR internet access. 1 The following steps will guide you to allocate Private IP address to DVR Server. Goto [Start] [Control Panel] [My Network Places]
2 Click the right mouse button from [Local Area Connection] in LAN or High Speed Internet. 3 Click [Properties]. 4 Double click [Internet Protocol (TCP/IP)]. 5 Manually input private IP address, do not select [Automatically Obtain IP Address.] If you do not know your IP address:
Click [Start] Click [Run] and enter cmd or command and press OK. A black DOS screen will appear, then type ipconfig and press Enter. Your IP Address, Submask and GateWay will be displayed, use these IP addresses and enter into Step 5
- Insert 168.126.63.1 for DNS. 6 After the setup is complete, you must access your router to set Port Forwarding.
- Refer to Router manual since Port forwarding function is different for every Router.
<Following is an example of AnyGate IP Router.>
Port forwarding Port No. : 20408, 26540
7 Refer to Dynamic IP Manual after the above setup is complete. FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-04-13 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-04-13
|
||||
1 | Applicant's complete, legal business name |
INTO-TECH Inc.
|
||||
1 | FCC Registration Number (FRN) |
0012844080
|
||||
1 | Physical Address |
3F, Seojin Bldg., 1-17, Cheongdam-Dong, Gangnam-Gu
|
||||
1 |
Seoul, N/A 135-100
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
S2M
|
||||
1 | Equipment Product Code |
SPLUS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** C****
|
||||
1 | Title |
Assistant Manager
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
s******@intotech.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DVR BOARD | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SK Tech Co., Ltd.
|
||||
1 | Name |
J****** H******
|
||||
1 | Telephone Number |
82-34********
|
||||
1 | Fax Number |
82-34********
|
||||
1 |
k******@unitel.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC