FCC ID: TQ4-XC-RF855 reader-writer

Shenzhen HQ:Corporate HeadquartersInvengo Information Technology Co., Ltd. 27th and 28th Floor,Hi-Tech Zone Union Tower, NO.63, Gaoxin south 10th road, Nanshan district, Shenzhen, China Tel: +86 800 830 7036 Fax: +86 755 2671 1693 Email: sales@invengo.cnWebsite: www.invengo.cnSingapore:Invengo Technology Pte. Ltd.10 Kallang Avenue, # 05-15 Aperia tower 2,Singapore, 339510Tel:+65 6702 3909 Email: invengo.sales@invengo.sgWebsite: www.invengo.sgUS:Invengo Technology Corp2700-160 Sumner Blvd.Raleigh, NC 27616, USATel: +1 919 890 0202Toll Free: +1 855 379 2725Email: sales@invengo.comWebsite: www.invengo.comEurope:Invengo Technology BV Belder 30-A, 4704RK Roosendaal,The NetherlandsTel: +31 88 6363 793Fax: +31 88 6363 794Email: web@invengo.euKorea:Invengo International Pte. Ltd (Korea)30F ASEM Tower, 517 Yeongdong-daero, Gangnam-gu, Seoul 135-798 Korea Tel: +82 2 6001 3525Fax: +82 2 6001 3003Email: justin.kou@invengo.sgUsers ManualXC-RF855 ReaderInvengo Information Technology Co., Ltd. FCC WARNING STATEMENT Changes or modific ations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diffe rent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Thank you for using Invengos RFID products!

We are glad that youve chosen XC-RF855 Integrative Reader. We hope our product will make your daily tasks at work easier!

Foreword This manual applies to the following model:

XC-RF855 Reader This manual provides information on product application, maintenance, repair and other features for users and maintenance staff of the products. or trademark belongs to Invengo. All introduction and explanation on the product features, as well as the functions and other related information, written in this manual, are the latest and accurate as at time of print. The company reserves all rights to make any correction or amendment to this manual without prior notice, and shall bear no responsibility for these actions. Safety Instructions Warning sign If operate improperly, it may result in damage to your equipment(s). Attention If ignored, it may result in unsuccessful operation If ignored, it may cause undesirable effect 10. After-sale service 10.After-sale service 10.1 After-sale Service When a user encounters unsolvable problems during the device usage, please contact our customer service center. 14 User ManualXC-RF855 Reader 8. Transportation and Storage 8.Transportation and Storage 8.1 Transport Requirements XC-RF855 reader meets all the requirements of relevant standard under road, rail, air, and water transportation. Items to take note during transportation: Avoid heavy pressure, rain, corrosive chemicals and harmful gas. 8.2 Storage Requirements The long term storage of XC-RF855 reader must fulfill the following conditions:

Ambient temperature: -15 - +60;

Relative humidity: less than 60%252;

9.Packaging and Unpacking 9.1 Packaging XC-RF855 reader is packaged using cassette packaging. 9.2 Unbox Inspection For future storage and transportation, please keep the box and packaging materials during inspection. Please check the product and its accessories carefully based on the packing list. Please contact us immediately if there is any discrepancy or damage. 13 Content 1 Product Overview .........................................................................1 1.1 Product component, functions and properties .............................................. 1 1.2 Main usage and application range ................................................................... 1 1.3 Model description .............................................................................................. 1 1.4 Operating conditions ........................................................................................ 1 1.5 Work environment ............................................................................................. 1 1.6 Impact on the environment and energy .......................................................... 2 1.7 Safety and protective measures ...................................................................... 2 2 Main features ................................................................................3 2.1 Main functions ................................................................................................... 3 2.2 Main technical parameters ............................................................................... 3 3 Dimension and Weight .................................................................4 3.1 External dimension ........................................................................................... 4 3.2 Weight ................................................................................................................. 4 4 Structure Features........................................................................5 4.1 Overall Structure Component .......................................................................... 5 4.2 Interface Panel Description .............................................................................. 5 4.3 LED Panel Description ...................................................................................... 5 User ManualXC-RF855 Reader 5. OPerating Mode 7.2 Troubleshooting and solution Failure Phenomenon Equipment cannot start 5 Installation and Commissioning .................................................6 5.1 Safety during installation.................................................................................. 6 5.2 Installation requirement .................................................................................... 6 5.3 Connection ......................................................................................................... 6 5.4 Power Supply ..................................................................................................... 7 Unable to read labels 5.5 USB driver supported system .......................................................................... 7 5.6 Acceptance ........................................................................................................ 7 5.6.1 Structural acceptance .................................................................................... 7 5.6.2 Performance acceptance ............................................................................... 8 6 Instructions ...................................................................................9 6.1 Preparation and Inspection .............................................................................. 9 6.2 Working State .................................................................................................... 9 6.3 Demo software operation ................................................................................. 9 Unable to connect devices through serial port LED lights are not bright Possible Cause Whether the power line has been connected Poor contact of power plug The antenna connector is loose The antenna has been damaged Tags are not in the antenna reading area The tags in the antenna reading area have been damaged The signal is seriously disturbed Resolvent Connect the power line Pull out the power plug and reinsert it Tighten the RF connector on the RFID module Check or replace the reader antenna Move the tags closer to the antenna Change a label to test it again Confirm whether there is a similar device work around it Serial port work abnormality Turn off the power supply and restart the equipment selection error The USB line is broken Serial port number Change the USB line Reselect serial port to match PC COM number. Serial port is occupied Closes the program which occupies the serial port The power line of the Check whether the power LED is not connected line is in good contact 6.4 Buzzer switch setting ...................................................................................... 10 Program without response Program issue Reboot device 6.5 Read labels....................................................................................................... 10 7 Routine maintenance and service ............................................ 11 7.1 Routine maintenance .......................................................................................11 7.2 Troubleshooting and solution ........................................................................ 12 12 User ManualXC-RF855 Reader 7. Routine Maintenance, FAQs and Troubleshooting 7.Routine Maintenance, FAQs and Troubleshooting 7.1 Routine Maintenance When cleaning the equipment, the power should be turned off. When the equipment is out of use for a long time, the power cord should be unplugged, and the equipment should be covered with dustproof fabric and kept in a cool and dry environment. If The equipment has been put away for a long time, inspection is recommended to see whether there is any breakage of the connecting line before making use of the equipment. For any unsolvable issues, please get in touch with the customer service center or technical support department of Invengo. 8 Transportation and storage .......................................................13 8.1 Transportation requirement............................................................................ 13 8.2 Storage requirement ....................................................................................... 13 9 Packaging and Inspection .........................................................13 9.1 Packaging......................................................................................................... 13 9.2 Unbox Inspection ............................................................................................ 13 10 After-sale service ......................................................................14 10.1 After-sale service ........................................................................................... 14 11 User ManualXC-RF855 Reader 1. Product overview 1. Product overview 6. Instructions 1.1 Product component, functions and properties XC-RF855 reader is a comprehensive UHF RFID equipment that was equipped with RFID module and antenna in it.This equipment has strong multi-tag reading capability, compatible with the protocol standards of ISO18000-6C (EPC global UHF Class 1 Gen 2). The appearance is beautiful and easy to use. 1.2 Main usage and application range Figure 6.3.2 XC-RF855 reader is mainly used in commercial retail, library management and other fields. 6.4 Buzzer switch setting 1.3 Model description This user manual is applicable to the XC-RF855 reader. 1.4 Operating conditions The RFID data collection system is composed of reader, tag, antenna, PC system and reader interface software. Before using the XC-RF855 reader, verify that all components of the RFID data collection system are complete and reliable connections between components. 1.5 Work environment This product should work on the hard, flat surface of the room, and be required good ventilation and heat dissipation conditions. Operating temperature-10+55 Humidity range10%90% RHno condensation Power supplyPower adaptorStandard accessoryor other Power supply Demo can be configured to turn on or turn off the buzzer, and the operation steps are shown below. 6.5 Read labels Figure 6.3.3 Place tags on the panel, 20 tags can be read by default. When testing, it is recom-

mended to flip the label carrier. 1 10 User ManualXC-RF855 ReaderUser ManualXC-RF855 Reader 6. Instructions 6. Instructions 6.1 Preparation and Inspection Confirm that the power supply and USB have been properly connected. 6.2 Working State After the power supply, the top power indicator light. 6.3 Demo software operation Click on Conn button as shown in the figure below:

Figure6.3.1 1. Product overview DC Output +4.5V+6VDrive current2A,Power Ripple100mV The technical specifications of the power adapter are as follows Order code1080200011 AC Input100240V50Hz60Hz DC Output5V/4A MAX Storage temperature-20+60 1.6 Impact on the environment and energy Any radio transmitting equipment, including this equipment, may cause interference with medical equipment that is not properly protected. If there is any problem in this regard, please consult with the medical equipment manufacturer. The operation of this equipment may also cause interference with other electronic devices. 1.7 Safety and protective measures The power adapter that is equipped with this equipment is AC power 100V -

240V.And the input voltage range of the DC power outputof this product is 4.5V6V. Please check your voltage range properly before installation!

9 2 User ManualXC-RF855 ReaderUser ManualXC-RF855 Reader 5. Installation and Commissioning The reader is fixed firmly, no loosening Screws tightened. 5.6.2 Performance acceptance Mainly from two aspects to check whether the reader is working normally Check whether the reader is working properly. Check the range of reading and writing to meet the requirements. 20 tags can be read at the same time by defaultThe reading range on top of the cover is not less than 50cmThe misreading area around the metal frame is no more than 10cmWhen testing, it is recommended to flip the label carrier. 2. Main features 2. Main features 2.1 Main Functions Compatible with the protocol standards of ISO18000-6C (EPC global UHF Class 1 Gen 2), and the performance of reading and writing tags is excellent. By matching the application software, the corresponding label information can be established. Support multi-tag reading. 20 Tags can be read by default, and supports more label reading by increasing power. 2.2 Main technical parameters Frequency band: 920.25MHz927.25MHz RF output power0dBm27dBmstepping 1dB, power selectable Air interface protocolSupport EPC global UHF Class 1 Gen 2 / ISO 18000-6C Read label EPC code rate140 pieces/S Readingdistance050cm Writing distance050cm Misreading range10cm Baud rate115200bps Maximum operating current1.5A Operating temperature-10+55 Storage temperature-15+60 Humidity range10%90% RHno condensation 3 8 User ManualXC-RF855 ReaderUser ManualXC-RF855 Reader 5. Installation and Commissioning 3. Dimension and Weight Use the USB cable provided to connect the reader to the PC. 3. Dimension and Weight 5.4 Power Supply Please follow the following steps to connect the XC-RF855 reader power sup-

ply:

Confirm that the input voltage and frequency of AC power supply meet the requirements:

AC input100-240V, 50-60Hz Confirm that the output voltage of the power adapter is 5V/4A. Insert the power cord into the AC power supply socket and insert the other end into the power interface of the reader. Once connected to power supply, the power indicator of the LED panel will be on, and the reader enters the initialization state, and the system complets the initialization process and enters the standby mode. XC-RF855 reader enters standby mode by default after initialization. The reader does not transmit any frequency when initializing and standby (RF ampli-

fier is turned off). RF amplifier only enters into operating condition after receiv-

ing command of read or write tag or start amplifier from the PC. 5.5 USB driver supported system Windows10 32,64-bitWindows8/8.1 32,64-bitWindows7 32,64-bitWin-

dows Vista and Vista 64-bitWindows XP and XP 64-bitWindows 98 98SE, ME, 2000, Server 2003, XP, Server 2008 and server 2012 R2,Windows XP Embedded,Windows CE 4.2, 5.0 and 6.0 5.6 Acceptance The acceptance criteria are mainly given from two aspects: structure and perfor-

mance. 5.6.1 Structural acceptance Check whether the installation meets the installation standards and the assembly in good condition. 3.1 Dimension Figure 3.1 XC-RF855 reader The external size of XC-RF855 reader is345mm270mm25.5mm 3.2 Weight The weight of XC-RF855 reader is2.5Kgnet weight 7 4 User ManualXC-RF855 ReaderUser ManualXC-RF855 Reader 4. Structural Features 4. Structural Features 4.1 Overall Structure Component XC-RF855 reader consists of RFID module, antenna, power supply and casing. 4.2 Interface Panel Description Figure 4.2 Interface Panel Interface panel description as follows 1Power interface (DC 5V/4A),is used to connect the 5V/4A power adapter. 2USB communication interface,is used to communicate with PC. 5. Installation and Commissioning 5. Installation and Commissioning Please read the chapter carefully before installing XC-RF855 reader. 5.1 Safety during installation The power adapter that is equipped with this equipment is AC power 100V -

240V. Please check your voltage range properly before using the external power supply. The input voltage range of the DC power outlet of this product is 4.5V6V. Please check your voltage range properly before installation!

The reader should be install in sheltered and well-ventilated places, protected from the rain, humidity and the sun (not suitable for places with high humidity). Note that the USB line is well connected. Any radio transmitting equipment, including this equipment, may cause in-

terference with medical equipment that is not properly protected. If there is any problem in this regard, please consult with the medical equipment manufacturer. The operation of this equipment may also cause interference with other elec-

tronic devices. 4.3 LED Panel Description 5.2 Installation requirement Figure 4.3 LED Panel Description LED Panel Description as follows 1The power indicator When the reader is powered on, the power indicator shows red. indicates that the reader is connected to the power supply. 2Working indicator.When the working indicator shows and flashes green,indicating that the reader is reading tags. Before the installation of XC-RF855 reader, please make sure the product is in-

tact, the accessories are complete. Should there be any discrepancy or damage, please contact the local supplier immediately for replacement. At the same time, please check if the following items fulfill the installation requirement Compactible with the operating environment. Complete list of accessories that are sufficient to fulfill the required standard and form a complete tag reading and writing environment. 5.3 Connection Connect the XC-RF855 reader with the PC. 5 6 User ManualXC-RF855 ReaderUser ManualXC-RF855 Reader

Width:2cm FCC ID LABEL:

Label Location:

FCC ID: TQ4-XC-RF855 Product name: reader-writer Model No.: XC-RF855 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Long:3cm

< Invengo Information Technology Co., Ltd. >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: Dec. 12, 2019 Subject; Request for Long Term Confidentiality FCC ID: TQ4-XC-RF855 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Xiao Rong Xing Title: Quality manager

Invengo Information Technology Co., Ltd. Letter of Authorization Company: Invengo Information Technology Co., Ltd. Address: 27 / f, 28 / f, united headquarters building, high-tech zone, no.63, gaoxin south 10th road, nanshan district, shenzhen Product Name: reader-writer Model Number: XC-RF855 FCC Identifier: TQ4-XC-RF855 We authorize MiCOM LabsInc, 575 Boulder Court, Pleasanton, California94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM LabsInc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Xiao Rong Xing Title: Quality manager Signature of applicant:

Date: Dec. 12, 2019