all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 3.63 MiB | October 12 2016 | |||
1 | Cover Letter(s) | October 12 2016 | ||||||
1 | Cover Letter(s) | October 12 2016 | ||||||
1 | External Photos | October 12 2016 | ||||||
1 | Internal Photos | October 12 2016 | ||||||
1 | ID Label/Location Info | October 12 2016 | ||||||
1 | Test Report | October 12 2016 | ||||||
1 | Test Setup Photos | October 12 2016 |
1 | user manual | Users Manual | 3.63 MiB | October 12 2016 |
Pro Radar Module RM1500 Smart Display SD2000 PRO RADAR SYSTEM RS2500 USER MANUAL & GUIDE www.PocketRadar.com/PRS PRO RADAR SYSTEM Revision 1.1 11/9/16 Print Date Pocket Radar, Inc. 3535 Industrial Dr. Suite A4 Santa Rosa, CA 95403 Toll Free: 888-381-2672 Support: Info@PocketRadar.com Website: www.PocketRadar.com PRO RADAR SYSTEM TABLE OF CONTENTS Must Aim Radar at Release Point.............(7) Aiming Illustrations....................................(8) Smart Display............................................(3) Pro Radar Module.....................................(4) Set Up Instructions....................................(5) Set Up Illustrations....................................(6) Power On - Self Test.................................(9) Standard Batteries....................................(9) USB Powered...........................................(9) Introduction...................................................................................1 Whats Included............................................................................2 Product Tour............................................................................3 - 4 Getting Started........................................................................5 - 6 Aiming.....................................................................................7 - 8 Power Options..............................................................................9 Standard Menu...................................................................10 - 12 Advanced Menu..................................................................13 - 19 Recommended Settings.............................................................20 Measurement Units (vnt)..........................(14) Sensitivity / Range (sen)...........................(15) Auto-Off / Timer (tof)...............................(16) Auto-On (aon)...........................................(17) Brightness (br).........................................(18) Display Version (Uer)...............................(19) Recall Memory..........................................(10) Clear Memory ..........................................(11) USB / Battery Level..................................(12) Indoor.......................................................(20) Outdoor....................................................(20) PRO RADAR SYSTEM Included...................................................(21) Not Included............................................(22) Pro Radar Module...................................(23 - 24) Smart Display..........................................(25) TABLE OF CONTENTS Accessories.........................................................................21 - 22 Mounting Options................................................................23 - 25 Troubleshooting..................................................................26 - 29 Specifications..............................................................................30 Error Codes................................................................................31 Factory Default Settings.............................................................32 FCC Class B Statement..............................................................33 Warranty Information...........................................................34 - 35 Interference.............................................(26) Ghost Readings......................................(27) Tips to Eliminate Interference.................(27) Angles.....................................................(28) Cosine Error............................................(29) Product Label..........................................(33) User Manual............................................(33) PRO RADAR SYSTEM INTRODUCTION Congratulations! You are now the owner of the most affordable pro performance radar system on the market. Award-winning technology places the Pro Radar System at the forefront of the sports and analytics revolution by providing accurate instant feedback on important metrics like Exit Velocity off the bat, Pitching, Serving, Shooting & Throwing Speeds. The Pro Radar System has up to 200 feet of range on a baseball and over 300 feet of range on larger objects. It is very portable for on-field battery powered operation that lasts all day. It has multiple mounting configurations, uses standard Alkaline C-size batteries and is also com-
patible with standard USB power supplies and Power Packs. The Pro Radar Module features proprietary ball-tracking technology to provide the user with professional level accuracy of +/- 1 MPH. The rugged, water-resistant casing is built from the same high-impact plastic as football helmets. Flexible configuration features allow for customized set-up options to best fit your speed measurement needs. The Smart Display is viewable to over 100 feet in bright sunlight, with a wide viewing angle and full 3 digit display. Lightweight and ultra-porta-
ble for indoor or on the field use, its brightness levels adjust automati-
cally with lighting conditions. It can be powered using standard Alkaline C-size batteries or externally using standard USB chargers or Power Packs. If you want to be a power user and try other features and settings, reading through this manual will help you to take full advantage of the other features and capabilities of the Pro Radar System. Any questions: check the Pocket Radar website under frequently asked questions (FAQs) or contact us at Info@PocketRadar.com. 1 PRO RADAR SYSTEM WHATS INCLUDED The parts included with your Pro Radar System are listed below. If you are missing any components, please contact Pocket Radar, Inc. at 1-888-381-2672 or email Info@PocketRadar.com Pro Radar Module RM1500 Smart Display SD2000 1 2 3 1. Two 6 ft (2 meter) USB cables Type A to Micro B 2. One 2 amp AC power supply (USB charger) 3. Two S hooks 2 PRO RADAR SYSTEM PRODUCT TOUR Smart Display Front Back 3 5 4 1 2 Side 12 7 8 9 10 11 6 Bottom 14 13 10. Indicator light for USB power 11. USB out to radar 12. Adjustable handle 13. Tripod mounting nut 14. Slots for tripod alignment pins 1. KPH units indicator or brightness sensor 2. MPH units indicator or brightness sensor 3. 3 Digit 7 segment speed display 4. Battery door 5. Instruction label 6. Cable slots for USB Power Packs 7. Power / Selection button (red) 8. Recall / Mode button (black) 9. USB power input 3 PRO RADAR SYSTEM PRODUCT TOUR Pro Radar Module Front Bottom 2 1 3 1. Micro B USB connector 2. Slots for tripod alignment pins 3. Tripod mounting nut 4 PRO RADAR SYSTEM GETTING STARTED Set Up Instructions In addition to its ease of use, the Pro Radar System is also easy to set up. Please refer to the illustrated quick start guide printed directly on the inside of the box for the easy 3 step set up solution for USB powered use of the Pro Radar System. 1. Insert the small end of one of the 6 ft (2 meter) Type A to Micro B cables into the Smart Display and the other end into the 2 amp AC power supply (USB charger). Then plug the 2 amp AC power supply into any power outlet. 2. Insert the small end of the other 6 ft (2 meter) Type A to Micro B cable into the Pro Radar Module and the other end into the Smart Display. 3. Press the Power (red) button on the Smart Display, and youre ready to start capturing speeds. See next page for illustrations. IMPORTANT NOTE: If the Pro Radar Module is not connected to the Smart Display, no rdr will flash for 2 minutes until it powers off automatically. To turn off the Smart Display, simply hold the Power (red) button down for 1 second. Once Off is displayed, release the button and the Smart Display is now turned off. Please note that the speed memory stored in the Smart Display will be erased as well. If you plan on using standard Alkaline C-size batteries or a USB Power Pack as your power source, please refer to page 9 in this Manual. 5 PRO RADAR SYSTEM GETTING STARTED Set Up Illustrations Please note, these illustrations are also featured on the inside cover of the box. 6 PRO RADAR SYSTEM AIMING Must Aim Radar at Release Point The Pro Radar System captures a speed reading by sending out a focused beam of very low power radio waves and looking for them to bounce off a moving object, such as a ball. These radio waves are focused in a small cone shaped like a flashlight beam which comes out the front end, where the arrow is pointing, on the Pro Radar Module. When positioning the Pro Radar Module, make sure it is set up and aimed directly in line with the release point of the ball. This can either be from behind or in front of the path of where the ball is coming from
(see pg. 28 to learn more about angles and how tilting down or up may affect a speed reading). Make sure the beam of the Pro Radar Module is not blocked or obstructed. Please refer to the illustrations on the next page and in the Quick Start Guide printed on the box for examples of where the Pro Radar Module should be set up. 7 PRO RADAR SYSTEM AIMING Aiming Illustrations Recommended Distance:
Set up the Radar Module either in front or behind the path of the moving object. If throwing or hitting into a net, set up the Radar Module at least 15 feet behind the net or the player. Please note, these illustrations are also on the inside cover of the box. 8 PRO RADAR SYSTEM POWER OPTIONS A unique feature that sets the Pro Radar System apart from other radar module and sign combinations is that it can be powered either using USB connection or Alkaline C-size batteries. This makes it extremely portable and flexible for indoor and outdoor use. Power On - Self Test If powered via USB or batteries, the Smart Display will flash 888 for 2 seconds, after pressing the Power (red) button. That means the Self Test has passed and you are ready to start capturing speeds. If the Self Test fails, then an error code will be displayed. The error code will include E #, where the # specifies the error number (example: E 4). This error code will flash every second for 2 minutes until it powers off automatically. See Page 31 for more about Error Codes. Standard Batteries If powered via Alkaline C-size batteries, after the Self Test passes, the Smart Display will flash bat for 1 second and then the current battery level (either Lo, 1, 2, 3 or 4) for another second. Typical battery life with Alkaline C-size batteries is 14 hours. See table below:
Level 4 3 2 1 Lo / Bat Remaining Life 100% to 76%
75% to 51%
50% to 26%
25% to 5%
Less than 20 minutes USB Powered When using a USB Power Pack, the battery life will be dictated by the specs of the Power Pack. See Page 22 for more about USB Power Pack options. 9 PRO RADAR SYSTEM STANDARD MENU Recall Memory The Pro Radar System stores the previous 25 speeds in the memory. Each time a speed is collected, the most recent speed is stored, and the oldest of the 25 speeds is discarded. To access the Recall memory, TAP the Mode (black) button on the Smart Display. The most recent speed will display. Cycle through the previous 25 speeds by repeatedly TAPPING the button, as shown below. If there are no speeds stored in the memory or you reach the end of the list, then it will display -. To exit the Recall Memory menu, simply press the Power (red) button or else it will automatically exit after 45 seconds of inactivity. NOTE: The Memory Recall list will be cleared automatically as soon as the Smart Display is turned off or any advanced settings are modified. 10 PRO RADAR SYSTEM STANDARD MENU Clear Memory Sometimes its better to start fresh when beginning a new session. To eliminate the previous speeds that are stored in the Smart Display, all you need to do is Press and Hold the Mode (black) button down for 2 seconds until the word "CLr displays. Once you see CLr, release the button and a - will appear. That means the memory has been deleted and you are now ready to capture new speeds. 1. 2. 3. 11 PRO RADAR SYSTEM STANDARD MENU USB / Battery Power Level The Pro Radar System offers unique flexibility with either USB or bat-
tery powered options. To view battery life or USB, simply Press and Hold the Mode (black) button down for 3.5 seconds. Once you see the word bat, release the the button. You will either see the word USB showing that you are using USB power, or you will see the Lo, 1, 2, 3, or 4 showing how much battery life is left on your Alkaline C-size bat-
teries (see table on Power Options page for more details). 1. 2. 3. NOTE: If the Smart Display flashes Lo / Bat immediately change the batteries. There are less than 20 minutes of operation remaining. 12 PRO RADAR SYSTEM ADVANCED MENU Holding down the Power (red) and Mode (black) buttons at the same time for more than 2 seconds will bring the user into the advanced menu listed below. Release both buttons when desired menu is shown. Allows the user to change units of measurement between either MPH or KPH. Allows the user to specify how long the Display should re-
main on before it automatically turns off. Allows the user to control the sensitivity of the Pro Radar Module from 1(shortest range) to 10(longest range). 1. Measurement Units (vnt): see page 14 2. Sensitivity / Range (sen): see page 15 3. Auto - Off / Power - Off Timer (tof): see page 16 4. Auto - On (aon): see page 17 5. Brightness (br): see page 18 from Auto (default) to Low (dim) or High (very bright). 6. Version (Uer): see page 19 Allows the user to identify which version of firmware their Pro Radar System contains. Allows the user to have the system automatically turn on when external power is supplied. Useful in permanent installations. Allows the user to manually adjust the visibility of the Display 13 PRO RADAR SYSTEM ADVANCED MENU Measurement Units The first menu feature is the option to alternate between miles per hour
(MPH) and kilometers per hour (KPH). Hold down the Power (red) and Mode (black) buttons for 2 seconds and "vnt will appear. Releasing the Power (red) and Mode (black) buttons while vnt is displayed will bring the user into the selection menu.
- Current unit (MPH or KPH) LED will flash every 0.5 seconds.
- Pressing the Power (red) button will cycle the user through MPH or KPH indicators.
- Pressing the Mode (black) button locks in your choice and resumes normal operation; Current selection on the display is saved as the new units.
- Not cycling for 45 seconds will not update the current units, and automatically exits the menu. The factory default setting is miles per hour (MPH) (See page 32 to Learn More) 14 PRO RADAR SYSTEM ADVANCED MENU Sensitivity / Range The second menu feature is the option to control the Sensitivity / Range of the Pro Radar Module from 1 (shortest range) to 10 (longest range). Hold down the Power (red) and Mode (black) buttons for 3.5 seconds and Sen will appear. Releasing the Power (red) and Mode (black) buttons while Sen is displayed will bring the user into the selection menu.
- "Sen and the selected value will alternate every 1 second.
- Pressing the Power (red) button will cycle the user through levels 1-10.
- Pressing the Mode (black) button locks in your choice and resumes normal operation; Current selection on the display is saved as the new range.
- Not cycling for 45 seconds will not update the curent value, and automatically exits the menu. The factory default setting is 10 (See page 32 to Learn More) 15 PRO RADAR SYSTEM ADVANCED MENU Auto - Off / Power - Off Timer The third menu feature is the option to specify how long the Display should remain on before it automatically turns off. Hold down the Power
(red) and Mode (black) buttons for 5 seconds and "tof will appear. Releasing the Power (red) and Mode (black) buttons while tof is displayed will bring the user into the selection menu.
- tof and the selected time will alternate every 1 second.
- Pressing the Power (red) button will cycle the user through the different timer options (no, 5, 15, 30, 60). No means indefinitely, while 5 - 60 are in minutes.
- Pressing the Mode (black) button locks in your choice and resumes normal operation; Current selection on the display is saved as the new timer value.
- Not cycling for 45 seconds will not update the current value, and automatically exits the menu. The factory default setting is 15 minutes (See page 32 to Learn More) 16 PRO RADAR SYSTEM ADVANCED MENU Auto - On The fourth menu feature is the option to automatically turn on the Display when plugged in using a USB power source. Hold down the Power (red) and Mode (black) buttons for 6.5 seconds and "aon will appear. Releasing the Power (red) and Mode (black) buttons while aon is displayed will bring the user into the selection menu.
- aon and the selected mode will alternate every 1 second.
- Pressing the Power (red) button will cycle the user through the different auto options (Yes or No). Yes means auto - on is set up, while No means auto - on is not set up.
- Pressing the Mode (black) button locks in your choice and resumes normal operation; Current selection on the display is saved as the new auto-on mode.
- Not cycling for 45 seconds will not update the current value, and automatically exits the menu. The factory default setting is "no (See page 32 to Learn More) 17 PRO RADAR SYSTEM ADVANCED MENU Brightness The fifth menu feature is the option to adjust the visibility of the Display in 3 different levels: Auto, Low and High. Hold down the Power (red) and Mode (black) buttons for 8 seconds and "br will appear. Releasing the Power (red) and Mode (black) buttons while br is displayed will bring the user into the selection menu.
- br and the selected mode will alternate every 1 second.
- Pressing the Power (red) button will cycle the user through three different brightness levels (avt, Lo and Hi): avt means automatic, while Lo is dim and Hi is very bright.
- Pressing the Mode (black) button locks in your choice and resumes normal operation; Current selection on the display is saved as the new brightness mode.
- Not cycling for 45 seconds will not update the current choice, and automatically exits the menu. The factory default setting is "Avt (See page 32 to Learn More) 18 PRO RADAR SYSTEM ADVANCED MENU Version The sixth and final menu feature is the identification of the firmware the Pro Radar System contains. Hold down the Power (red) and Mode
(black) buttons for 9.5 seconds and "Uer will appear. Releasing the Power (red) and Mode (black) buttons while Uer is displayed will bring the user into the selection menu.
- Dsp or rdr and the version number will alternate every 1 second.
- Pressing the Power (red) button will cycle the user through Dsp and version number of the Display, or rdr and version number of the Pro Radar Module.
- Pressing the Mode (black) button or leaving untouched for 45 seconds will exit the menu. This information is only necessary if you are contacting Pocket Radar for support. 19 PRO RADAR SYSTEM RECOMMENDED SETTINGS Indoor To avoid false readings from interference sources, you should use the lowest Sensitivity / Range setting possible that will still pick up the speed of the object you want to measure. Outdoor When using any speed radar, you should check the environment to see if you pick up any interference readings from cars, radios or cell phone towers, or other moving objects. Adjust the Sensitivity / Range down to avoid these interference readings. 20 PRO RADAR SYSTEM ACCESSORIES Included Two 6 ft (2 meter) USB cables Type A to Micro B The cables are used to connect the Radar Module to the Smart Display, as well as provide USB power. Two S hooks One 2 amp AC power supply (USB charger) The S Hooks are used to hang the Smart Display onto a fence or camera tripod. See Mounting Options on page 25. The AC power supply is used to provide power via USB. 21 PRO RADAR SYSTEM ACCESSORIES Not Included USB Power Packs 50 foot USB Extender Cable Kit Camera Tripod A Deluxe Tripod may be purchased through the Pocket Radar online store. 22 USB Power Packs are available in several sizes and power ratings. Small ones should provide over 5 hours of use from a fresh charge. USB cables are only useful up to 6 feet (2 meters) in length. If you plan to set up the Pro Radar Module and Smart Display more than 6 feet apart, this Extender Kit is available through the Pocket Radar online store. Alkaline C-Size Batteries 4 Alkaline C-size batteries provide up to 14 hours of use with the Smart Display. PRO RADAR SYSTEM MOUNTING OPTIONS Pro Radar Module The Pro Radar System is extremely flexible and portable, which makes it the ideal choice for measuring speeds either indoors or outdoors. There are a number of ways you can set up the Pro Radar System, but you need to ensure two key details in regards to setting up the Radar Module to capture speeds accurately. 1. The Radar Module must be aimed directly at the release point. This can be acheived whether the path of the ball is coming towards or away from the Radar Module. 2. Make sure the Radar Module is not tilted up or down or away from the path of the moving object, as this can affect accuracy of the reading or make you miss the ball as well. The ideal set up with the Radar Module would be mounting it onto a camera tripod. The screw located on the bottom of the Radar Module makes it easily attachable to standard camera tripods. Please refer to the illustrated steps on the next page to set up your Radar Module. 23 PRO RADAR SYSTEM MOUNTING OPTIONS Pro Radar Module 1. 2. 3. Detach the tripod shoe that screws into the bottom of the Pro Radar Module. 4. 5. 6. Insert the tripod shoe into the Pro Radar Module screw area with the alignment pin in the slot. Using fingers or a coin, screw the tripod shoe into the Pro Radar Module. Attach the tripod shoe and Pro Radar Module back onto the tripod. Questions? Visit www.PocketRadar.com/PRS for helpful video tutorials or call us toll-free at 888-381-2672 24 PRO RADAR SYSTEM MOUNTING OPTIONS Smart Display While it is ideal to set up the Radar Module using a camera tripod, the Smart Display has many different mounting/location options. The Smart Display can be mounted to a metal fence using S Hooks (included) or carabiners, to a camera tripod using the tripod mount located on the bottom, to the legs of a tripod with the S Hooks, sitting on a chair or table, hung on a wall using the handle or even standing on the ground using the handle as a kickstand. Please refer to the illustrations below. Two S hooks S Hooks can be used to mount the Smart Display to a fence or the bottom of a camera tripod. Camera Tripod See similar mounting steps on page 24. Smart Display Kickstand Located on back of Smart Display. 25 PRO RADAR SYSTEM TROUBLESHOOTING Interference Certain types of interference can cause all radar equipment to some-
times display false or so called ghost readings, or make it harder to capture the speed of the intended object. Movement: Any objects that rotate, move or vibrate can create a read-
ing. Large amounts of vibration, such as very loud noises, can result in false readings. Things like motors, fans, nearby traffic or the move-
ment of tree leaves can be detected by the Pro Radar Module. In some cases, if you are measuring speeds on a field near a roadway, you may pick up the speed of a car in the distance. Electrical: Cell phones, cell towers, wireless devices, radio and TV transmitters, computers, fluorescent lights, televisions, walkie-talkies, etc., can also possibly create a false reading. Appliances Fan Motion Computers Cell Phones Microwaves Florescent Bulbs One technique to test for interference is to make a measurement in the same direction with no obvious object in motion and see if you get a speed to display. 26 PRO RADAR SYSTEM TROUBLESHOOTING Ghost Readings Radar devices are very sensitive instruments for measuring moving objects of any kind. There may be times when the speed reading displayed may not make sense, or when there is no apparent moving object present. False readings of this kind are sometimes referred to as ghost readings. These can result from either a movement of some kind, such as a fan or hidden moving object, or an electrical source of interference, such as a fluorescent light, neon sign, computer monitor, cell phone or cell phone tower nearby. You will need to use your own judgment to decide if the speed measure-
ment makes sense. If the speed doesnt make sense, you may have a false reading. An example would be if the Display flashes 107 mph, when you know the ball speed shouldnt be any higher than 65 mph. The Pro Radar System has software designed to ignore most of these false ghost readings, but in certain cases there may be things in your environment that may cause interference. Tips to Eliminate Interference If you are capturing random speed readings, there may be a solution to your problem. Here are a few tips that may help:
Change the Sensitivity / Range level of the Pro Radar Module to a lower setting. As stated in page 10, your options are 1(shortest range) to 10(longest). Use the lowest range setting that will reliably get the object speed that you want. If the Pro Radar Module is positioned behind the release point, try changing the location to be in front. 27 PRO RADAR SYSTEM TROUBLESHOOTING Angles A common mistake made with radar equipment is trying to measure the speed of an object at an angle. Due to the nature of how Doppler speed radar works, the Pro Radar System will measure most accurate speeds when the object is moving directly towards or away from the Pro Radar Modules beam. If you set up the Pro Radar Modules beam even a slight angle sideways to the path of the moving object, you will measure a SLOWER speed than the object actually travels along its path. At slight angles the error is very small; however at larger angles the error can become substantial. Please refer to the table below for speeds related to off-angle issues. 28 PRO RADAR SYSTEM TROUBLESHOOTING Cosine Error This off angle speed measurement error is referred to as the COSINE error, named after the mathematical function that allows you to calculate the exact speed versus angle. The measured speed will always read lower than the actual speed as you move off the centerline of the path of the moving object. For small angles, this error will be very small. This is why you see police officers pointing their radar along the direction of the road; not down a side street pointing sideways to the road. Each degree from center will cause your speed to read the noted % lower. 29 PRO RADAR SYSTEM SPECIFICATIONS Nominal Operating Frequency: K-Band 24.125 GHz Measures from: 25 to 130 MPH (40 to 209 KPH) Accuracy: +/- 1 MPH (+/- 2 KPH) Range under good measurement conditions:
Baseball up to 200 feet and Larger Objects up to 300 feet. Size: Smart Display Height (8.75 inches), Width (11 inches), Depth (2.75 inches) Pro Radar Module Height (5.75 inches), Width (4 inches), Depth (8 inches) Weight: Smart Display 2 lbs. 6 oz. (without 4 Alkaline C-size batteries) 3 lbs. 0 oz. (with 4 Alkaline C-size batteries) Pro Radar Module 2 lbs. 2 oz. Typical Battery Life:
14 hours with 4 Alkaline C-size batteries (not included) Operating Temperature Range: -22 F to 140 F (-30 C to 60 C) Storage Temperature: -40 F to 185 F (-40 C to 85 C) Memory Recall function: 25 readings deep 30 PRO RADAR SYSTEM ERROR CODES ERROR:
No Radar Low Battery Unsupported Device External Power Failure Internal Power Failure Communication Failure Radar Version Failure Internal Overflow Flash Memory Failure CODE: EXPLANATION:
FIX:
No / rdr Lo / Bat E 1 E 2 E 3 E 4 E 9 E16 E19 Radar is not connected There is 20 minutes left of power on the batteries Device other than the Radar Module connected to the Smart Display Connect Radar Module Replace Batteries Connect Radar Module to the Smart Display External Power Supply has failed, possibly overloaded Disconnect / reconnect Radar Module. If not resolved, contact support Internal Power Supply has failed, possibly a mechanical issue Disconnect / reconnect all power. If not resolved, contact support An issue has occurred in communication with the radar Disconnect / reconnect all power. If not resolved, contact support Unsupported Radar Module connected to the Smart Display Connect supported Radar Module to Smart Display. Contact support for help An issue has occurred in communication with the radar Disconnect / reconnect all power. If not resolved, contact support Configuration value not correctly saved Disconnect / reconnect all power. If not resolved, contact support Need help? Please contact Pocket Radar, Inc. You can reach us toll-free at 888-381-2672 or by e-mail at Support@PocketRadar.com 31 PRO RADAR SYSTEM FACTORY DEFAULT SETTINGS Measurement Units: MPH (miles per hour) The Smart Display out of the box will be set to miles per hour instead of kilometers per hour because it is the unit preference of most of our users. Sensitivity / Range: 10 The Pro Radar System has a factory default setting for the maximum possible range. Auto - Off / Power - Off Timer: 15 Minutes The Pro Radar System will automatically turn off after 15 minutes of no activity while on batteries. This is a good balance which ensures the system will not shut off prematurely, but still maximizes the battery life available from a set of Alkaline C-size batteries. Auto - On: No Most users will find that they do not want the Pro Radar System to automatically power on when plugged in to a USB power source. The Auto-On setting is not for all users. It is good for permanent installations that want to have it power on when the AC power is turned on. Brightness: Auto The Pro Radar System Auto mode will switch the display between Lo and Hi automatically depending on ambient lighting conditions. Outdoors on a sunny day, the display will automatically brighten when showing speeds to enable further distance viewing. 32 PRO RADAR SYSTEM FCC CLASS B STATEMENT FCC Class B Product Label Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Class B User Manual Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: Changes or modifications not expressly approved by the party responsible for compliance may void the users authority to operate the equipment. Not intended for Law Enforcement Use. 33 PRO RADAR SYSTEM WARRANTY INFORMATION Limited Warranty Pocket Radar, Inc. warrants to the original user that this product will be free of defects in workmanship and materials for a period of two years from the date of purchase. If the product is found by Pocket Radar, Inc. to be defective, Pocket Radar, Incs entire liability and your exclusive remedy for breach of warranty shall be that Pocket Radar, Inc. will repair or replace the product and return the product or its replacement to you at no charge. Provided that you ship the product to Pocket Radar, Inc. in an authorized RMA shipping package with a description of the defect and subject to the other conditions of this warranty. Should the product prove to not be repairable, Pocket Radar, Inc. may substitute an equivalent product of the same or similar style and of a value not lesser than the original purchase price of your instrument. Pocket Radar, Inc. warrants the repaired or replacement product to be free from defects in material and workmanship on the same terms as the product originally purchased. This warranty will be void if the product, serial number or other identification marks have been defaced, damaged or removed. This war-
ranty does not cover wear and tear due to normal use, or damage to the product as the result of improper usage, neglect of care, alteration, accident or unauthor-
ized repair, nor does this warranty apply to the batteries necessary to operate the product. This warranty is extended to the original retail purchaser only and may not be transferred or assigned to subsequent owners. In order to validate your warranty, you must provide proof of purchase acceptable to Pocket Radar, Inc. together with the product for warranty repair/replacement. Products returned to Pocket Radar, Inc. must be pre-authorized by Pocket Radar, Inc. and must be returned in an authorized RMA (Return Material Autho-
rization) packaging. Please contact Pocket Radar, Inc. to obtain information on authorized packaging and to obtain return instructions or for any other question regarding this warranty. 34 PRO RADAR SYSTEM WARRANTY INFORMATION Limited Warranty cont. THE FOREGOING WARRANTY IS GIVEN IN LIEU OF AND POCKET RA-
DAR, INC. DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESSED OR IMPLIED, IN FACT OR IN LAW, WITH RESPECT TO THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, (1) THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, OR (2) THAT USE OF THE PRODUCT WILL BE UNINTERRUPTED AND ERROR FREE. Pocket Radar, Inc. shall have no liability for any indirect or speculative dam-
ages (including, but not limited to, consequential, incidental and special dam-
ages) relating to the use of or inability to use this product, whether arising out of contract, negligence, tort, or under any warranty theory, or for infringement of any other partys intellectual property rights, irrespective of whether Pocket Radar, Inc. had advance notice of the possibility of any such damages, including, but not limited to, loss of use, revenue or profit. In no event shall Pocket Radar, Incs total liability for all claims regarding the product exceed the price paid for the product. Pocket Radar, Inc. neither assumes nor authorizes anyone to assume for it any other liabilities. Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages, so the above limitations or exclusions may not apply to you. RETURN INFO For US Customers:
If your Pocket Radar product is not working properly please DO NOT RETURN TO THE RETAILER OR STORE. We are here to help. Please contact Pocket Radar, Inc. and we will take care of you. You can reach us toll-free at 888-381-2672 or by e-mail at Support@PocketRadar.com 35 PRO RADAR SYSTEM
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-12-13 | 24125 ~ 24125 | FDS - Part 15 Field Disturbance Sensor | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-12-13
|
||||
1 | Applicant's complete, legal business name |
Invention Planet, LLC
|
||||
1 | FCC Registration Number (FRN) |
0018369553
|
||||
1 | Physical Address |
3535 Industrial Drive Suite A4
|
||||
1 |
3535 Industrial Drive
|
|||||
1 |
Santa Rosa, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WZK
|
||||
1 | Equipment Product Code |
PR-1001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
G****** M********
|
||||
1 | Title |
CTO
|
||||
1 | Telephone Number |
707-5********
|
||||
1 | Fax Number |
707-5********
|
||||
1 |
g******@inventionplanet.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | FDS - Part 15 Field Disturbance Sensor | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Doppler Sensor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Nemko Canada Inc. (Ottawa)
|
||||
1 | Name |
C**** N******
|
||||
1 | Telephone Number |
613-7******** Extension:
|
||||
1 | Fax Number |
613-7********
|
||||
1 |
c******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.245 | 24125.00000000 | 24125.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC